铈钛混合氧化物负载磷钨酸吸附-分解NOx性能

通过软化学途径合成了铈钛混合氧化物(CeO2-TiO2)载体材料,并分别通过等体积浸渍法和机械研磨法负载磷钨酸(H3PW12O40)。采用FTIR、XRD、SEM和BET比表面积测定对CeO2-TiO2及负载型多酸催化剂进行了表征;考察了负载量、负载方法、吸附温度等因素对催化剂吸附NOx效率的影响;选取吸附性能最佳的催化剂进行了NOx催化分解实验,探讨了NOx吸附-分解机理。结果表明:相对于等体积浸渍法,机械研磨法更适合此类载体负载H3PW12O40,其NOx吸附效率均高于H3PW12O40及载体本身;在0~60%的负载量范围内,随着H3PW12O40负载量的增加,负载型催化剂吸附NOx的效率呈先升后降趋势,负载量为40%时NOx吸附效率最佳,达90%;吸附过程中NOx与催化剂活性组分H3PW12O40发生作用,生成NOH+;H3PW12O40二级结构中结晶水对催化剂吸附NOx有重要作用;当温度从150℃升至450℃时,被吸附的NOx发生分解,分解产物的组成与N2的收率均受升温速率的影响,升温速率越快,N2收率越高。向吸附分解NOx后的催化剂床层通入含有水蒸气的空气,可有效补充NOx分解过程中H3PW12O40失去的结晶水,从而恢复催化剂优良的NOx吸附分解性能,实现催化剂的有效再生利用。     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO₂二元氧化物表面NO的NH₃催化还原反应的机理。研究了CrO-CeO₂二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程, 在SCR反应过程中分别切断NH₃和NO的气流, 并采集了所生成的原位漫反射红外光谱图, 通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从E-R机理。     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

NbS2-xSex的制备、表征及其摩擦学性能

本文采用固相反应合成了NbS_2-xSe_x纳米材料。并分别采用XRD、SEM、TEM、HRTEM进行了结构、形貌和成分的分析表征。系统研究了合成温度、保温时间及不同掺杂量对产物晶型和形貌演化的影响及规律性。结果表明Se的掺杂使NbS_2-xSe_x的形貌由纳米带(板)转变为纳米片,衍射峰明显宽化,峰强变弱,晶粒细化。且掺杂量、保温温度及时间对产物的形貌影响较大;在750℃下保温2h得到的掺杂5at%Se的NbS_1.9Se_0.1形貌良好。将NbS_2-xSe_x作为液体石蜡油的添加剂的UMT-2摩擦学实验结果表明掺杂后的NbS_2-xSe_x具有优异的摩擦性能,其中掺杂5at%的Se在750℃下保温2h的NbS_1.9Se_0.1摩擦性能最佳,同时对其摩擦机理进行了解释。     

中温固体氧化物燃料电池阴极材料Sm2-xCexCuO4的制备与性能研究

采用甘氨酸-硝酸盐法合成了新型中温固体氧化物燃料电池(ITSOFC)阴极材料Sm_2-xCe_xCuO₄(SCC，x=0.0～0.25)。利用XRD和SEM对材料的结构、化学稳定性和微观形貌进行分析表明，该阴极材料与电解质Ce_0.9Gd_0.1O_1.9(CGO)在1 000 ℃烧结时不发生反应;且烧结2 h后，二者之间形成良好的接触界面。利     

纳米Ce1-xLaxO2-δ的微波引诱燃烧合成及其性能表征

Nanometer Ce_1-xLa_xO_2-δ solid solutions were synthesized by microwave-induced combustion process us-ing cerium nitrate hexahydrate， lanthanum nitrate hexahydrate and urea as raw materials. The process took only six minutes to obtain La₂O₃-doped CeO₂ nanopowders. The nanopowders were characterized by XRD， Laser Raman spectrum ， UV-Vis spectroscopy，field-emission scanning electron micrograph(FE-SEM)and TEM. The results revealed that the grain size of Ce_1-xLa_xO_2-δ varied from 20 to 40 nm calculated by Scherer formula through the plane of (111)， that oxygen vacancy was produced in the crystal lattices and the concentration of oxygen vacancy was increased with La doping， therefore the covalence of Ce-O bond was strenthened， which results in more intensive UV-C(200～280 nm)absorption. It can be seen from SEM that the porous appearance was obtained. Grain size is no more than 40nm observed from TEM.     

CexPr1-xO2-δ复合氧化物的XRD和Raman表征

A series of Ce_xPr_1-xO_2-δ mixed oxides were synthesized by sol-gel method and characterized by Raman and XRD techniques. When x value was changed from 1.0 to 0.5, only a cubic phase CeO₂ was observed. The samples were very well crystallized on decreasing x from 0.50 to 0.99. For Ce_xPr_1-xO_2-δ samples 465 cm^-1 and 1 150 cm^-1 Raman peaks are attributed to the Raman active F_2g mode of CeO₂. The broad peak at about 570 cm^-1 in the region of 0.3 ≤x≤ 0.99 can be linked to lattice defects resulting in oxygen vacancies. The new band at about 195 cm^-1 may be attributed to the asymmetric vibration caused by the formation of oxygen vacancies. Calcination temperatures had great effect on the peak intensity for CeO₂ but less effect on Ce_0.8Pr_0.2O_2-δ in Raman spectra. It might be due to the transformation of the colors for the mixed oxides, the insertion of Pr atom into the ceria lattice could enhance the sintering resistance and thermal stability of the mixed oxides.     

Mn1-x(Li,Ti)xCo2O4尖晶石型复合氧化物的制备、表征与催化性能

用柠檬酸配位燃烧法合成了Mn_1-x(Li,Ti)_xCo₂O₄系列尖晶石型复合氧化物催化剂，使用FTIR和XRD方法对催化剂结构进行表征，通过程序升温氧化反应(TPO)技术对这些催化剂在模拟柴油机尾气条件下进行同时消除NO_x和柴油碳黑反应的活性评价。结果表明，掺杂Li或Ti后的Mn_1-x(Li,Ti)_xCo₂O₄系列催化剂仍然保持了完整的尖晶石型复合氧化物结构，这些催化剂对同时消除柴油机尾气中的碳黑颗粒和NO_x具有良好的催化性能，其中Li或Ti的掺杂量为x=0.05较佳，结合碳黑燃烧与NO_x还原总的催化效果，Mn_0.95Li_0.05Co₂O₄具有最好的催化活性。     

中温固体氧化物燃料电池阴极Sr3Fe2-xNixO7-δ(x=0,0.1,0.2,0.3)的制备与性能

采用溶胶凝胶法(sol-gel)合成了Sr_3Fe_(2-x)Ni_xO_(7-δ)(x=0,0.1,0.2,0.3)系列阴极材料,通过X射线衍射、热膨胀系数测试、电导率测试、极化阻抗(R_p)测试、单电池性能测试等对材料的物相结构、热力学性能、电化学性能进行了表征。结果表明,所有样品均成功合成为具有类钙钛矿结构的单一纯相。热膨胀系数随着Ni元素掺杂含量的提高而不断下降。其高温电导率随着Ni元素掺杂含量的提高而升高,SFN30具有该系列最高的电导率101 S·cm~(-1)。该系列样品的极化阻抗随着Ni元素掺杂含量的提高呈现先下降后上升的趋势,SFN10在800℃具有小的极化阻抗(R_p=0.078 8Ω·cm~2)。电解质支撑的单电池输出功率变化趋势与极化阻抗趋势一致,SFN10在800℃获得421.6 mW·cm~(-2)的输出功率密度。     

La1-xSrxCoO3(x=0,0.2,0.4,0.6,0.8)钙钛矿型氧化物的催化性能及改性

通过溶胶-凝胶法制备出A位Sr掺杂的钙钛矿型氧化物La_(1-x)Sr_xCoO_3(x=0,0.2,0.4,0.6,0.8),并将其作为催化剂应用于双功能氧电极中。测试结果表明,A位Sr的掺杂的La_(1-x)Sr_xCoO_3比LaCoO_3具有更高的电催化活性,并且La_(0.6)Sr_(0.4)CoO_3在氧还原和氧析出反应中均表现出最优的催化性能,最大电流密度分别达到0.244 A·cm~(-2)(-0.6 V vs Hg/HgO)和0.303 A·cm~(-2)(1 V vs Hg/HgO)。为进一步提高催化剂的催化活性,将水热法制备的α-MnO_2纳米管与La_(0.6)Sr_(0.4)CoO_3复合作为双功能催化剂。当α-MnO_2的质量分数为40%时,比起单一的α-MnO_2或钙钛矿氧化物,α-MnO_2/La_(0.6)Sr_(0.4)CoO_3复合材料表现出协同效应,有更好的双功能电催化活性,使双效氧电极具有更好的电化学性能及稳定性。     

Microwave-promoted efficient conversion of acetophenones to 1,3,5-triarylbenzenes catalyzed by H3PW12O40 and nano-silica supported H3PW12O40 as reusable catalysts

H₃PW₁₂O₄₀ and nano-silica supported H₃PW₁₂O₄₀ were found to be efficient heterogeneous catalysts for the preparation of 1,3,5-triarylbenzenes via triple self condensation of acetophenones under microwave irradiation and solvent-free conditions. High yields, short reaction times, easy work-up, easy availability and handling, eco-friendly and reusability of the catalysts are the main aspects of the present method. The catalytic mechanism of 1,3,5-triarylbenzenes synthesis is also proposed.     

不同方法制备的磷钨杂多酸功能化3DOM-SiO2材料性能研究

磷钨杂多酸功能化的 3DOM-SiO₂ 材料以直接浸渍和溶胶凝胶-胶晶膜板法制备，后一方法的模板去除分别采用了溶剂萃取和高温煅烧工艺。通过 SEM、TEM、BET、EDXS测试，考察了大孔材料的孔结构特征及孔壁组成，所制备大孔材料均显示了良好的三维规整性，尤其是煅烧样品，它不但孔结构优异，且孔壁粒子堆积致密、比表面积较大，强度较高。XRD、FTIR 表征显示以溶胶凝胶法制备的样品中，杂多酸与载体间存在的化学作用，导致杂多酸特征峰发生一定的位移，但仍保持杂多酸Keggin结构。吡啶吸附表明所得样品均存在B酸中心，并以苯和十二烯的烷基化催化反应表征了所得样品的催化活性及再使用性，结果显示所有样品均具有良好的催化活性，按单位杂多酸计算，浸渍样品催化活性最高，但杂多酸易脱落，再使用性差；煅烧样品具有最佳的催化活性和再使用性。     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

Photocatalytic oxidation of primary and secondary benzylic alcohols to carbonyl compounds catalyzed by H3PW12O40/SiO2 under an O2 atmosphere

An efficient, selective and green procedure for the photocatalytic oxidation of primary and secondary benzylic alcohols to the corresponding aldehydes and ketones has been achieved using silica-encapsulated H₃PW₁₂O₄₀ as a recyclable heterogeneous photocatalyst in acetonitrile under oxygen gas as the sole reoxidant of the catalyst.     

双帽Keggin型杂多阴离子[H4As3Mo12O40]-和Keggin型杂多酸H3PM12O40 (M＝Mo, W)质子化的DFT研究

选用B3LYP方法在LanL2MB水平下, 对双帽α-Keggin型杂多阴离子[H₄As₃Mo₁₂O₄₀]^-的电子结构和质子的定位进行了密度泛函理论(DFT)研究. 结果表明, 双帽的形成大大影响了杂多阴离子[As₃Mo₁₂O₄₀]^5－的电子结构和性质, NBO分析显示参与成帽的三桥氧上的电子密度比双桥氧上的要大, 简单地从电荷密度来看, 质子将首先在三桥氧上定域成键, 但通过比较质子定域在几种桥氧上质子化稳定化能的大小, 发现[H₄As₃Mo₁₂O₄₀]^-中的四个质子将在八个双桥氧中的其中四个氧原子上定位, 而不是如文献中报道的在四个三桥氧上定域成键. 对杂多酸H₃PM₁₂O₄₀ (M＝Mo, W)中质子的定位也进行了理论计算并与文献进行了比较, 结果显示, H₃PMo₁₂O₄₀中质子是定位在双桥氧上; 而H₃PW₁₂O₄₀中质子将优先在双桥氧上定位, 但也可在端氧上定位; 这一结果与文献报道的相一致.     

Cs取代对Ni-H3PW12O40/SiO2催化剂结构性质和催化性能的影响

采用两步浸渍法和载体上的原位反应制备了一系列Cs部分取代的Ni-Cs_xH_3-xPW₁₂O₄₀/SiO₂催化剂,并用N₂吸附比表面积测定(BET)、电感耦合等离子体发射光谱(ICP)、X射线衍射(XRD)、拉曼光谱(Raman)、原位X射线衍射(in situ XRD)、NH₃程序升温脱附(NH₃-TPD)、H₂程序升温还原(H₂-TPR)、H₂程序升温脱附(H₂-TPD)、吡啶吸附傅里叶变换红外(FTIR)光谱等分析测试技术对催化剂进行了表征. 以正癸烷为模型化合物,对催化剂的加氢裂化性能进行了评价. 结果表明,8%Ni-50%Cs_1.5H_1.5PW/SiO₂催化剂具有最高的C₅₊收率,明显优于8%Ni-50%H₃PW/SiO₂催化剂和工业催化剂. 随着Cs 在Cs_xH_3-xPW中比例的增加,正癸烷的转化率逐渐降低,而C₅₊选择性则逐渐提高. 当催化剂具有合适的孔径时,选择性的提高是由于催化剂酸性的减弱,而转化率的降低则是由于催化剂加氢能力的减弱.     

用于NO_x低温下吸附还原的CoO_x/CeO_2二元氧化物的制备

研究了以多孔二氧化硅微球和活性炭为载体制备NOx吸附/还原催化剂的方法,摸索了最佳Ce/Co物质的量的比例。采用低温氮吸附方法测定了样品的BET比表面和孔容,利用XRD方法表征了样品中所掺杂的金属元素的晶型。研究发现:当nCe/nCo=75/25时,材料获得最佳NOx吸附能力,当以多孔二氧化硅微球作载体时,材料对于NOx的吸附主要来自CoOx和CeO2的二元氧化物;当以活性炭作为载体时,活性炭参与了NOx的吸附,因此其吸附容量大大提高。对NOx的吸附机理进行了探讨,并研究了样品的NH3还原性质。     

Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

Catalytically Promoted NOx Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.