同轴静电纺丝法在纳米中空Ti02纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶,钛酸四正丁酯和PVP溶胶,银颗粒为前驱体,以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维.将双组分纤维在200℃下热处理去除乙醇与表面吸附水后,继而在空气气氛中焙烧至600℃.可以得到在内表面上沉积银颗粒的TiO2纳米管,银颗粒的直径为5-40 nm,TiO2纳米管的外径150-300 nm.管臂厚10-20 nm.用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征.中空纤维的直径和管壁可以通过改变电纺参数来调节.与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较,Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

同轴静电纺丝法在纳米中空TiO2纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸四正丁酯和PVP溶胶/银颗粒为前驱体, 以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维. 将双组分纤维在200 ℃下热处理去除乙醇与表面吸附水后, 继而在空气气氛中焙烧至600 ℃, 可以得到在内表面上沉积银颗粒的TiO2纳米管, 银颗粒的直径为5-40 nm, TiO2纳米管的外径150-300 nm, 管臂厚10-20 nm. 用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征. 中空纤维的直径和管壁可以通过改变电纺参数来调节. 与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较, Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

Long TiO2 hollow fibers with mesoporous walls: sol-gel combined electrospun fabrication and photocatalytic properties

Long TiO2 hollow fibers with mesoporous walls have been fabricated with the sol-gel combined two-capillary spinneret electrospinning technique using a triblock copolymer (Pluronic, P123, (H(C2H5O)20(C3H7O)70 (C2H5O)20OH) as a pore-directing agent. The as-prepared hollow fibers were as long as 30 cm with an outer diameter of 0.1-4 microm and wall thickness of 60-500 nm. The diameters and wall thicknesses of the hollow fibers could be tuned by adjusting the electrospinning parameters. The fiber walls were composed of mesopores 6.7 nm in diameter as calculated from the N2 adsorption/desorption isotherm. The high-resolution TEM (HR-TEM) images exhibited that the mesopores were hexagonally aligned with a low order because of the curving of the pores. When comparing with other nanostructured TiO2 materials such as commercial TiO2 nanoparticles (P25, Degussa) and mesoporous TiO2 powders, the hollow fibers exhibited higher photocatalytic activities toward degradation of methylene blue and gaseous formaldehyde.     

以手性两亲小分子自组装体为模板制备介孔二氧化硅空心球

合成了手性阳离子型两亲性小分子化合物,利用圆二色谱分析了其在水中形成的自组装体的结构;以该化合物的自组装体为模板,在正丙醇和氨水的混合溶剂中制备得到了介孔二氧化硅空心球;利用扫描电镜、透射电镜、X射线衍射仪以及氮气吸附-脱附试验装置分析了二氧化硅空心球的形貌及孔结构.结果表明,两亲性小分子在水中形成的自组装体呈现手性堆积;合成的介孔二氧化硅空心球的直径约为600~800nm,壁厚约为100~150nm,其孔道垂直于球的表面,孔径约为3.0nm,比表面积约为306m2·g-1.正丙醇作为模板控制二氧化硅空心球的空腔尺寸和形貌,而两亲性小分子的自组装体作为模板控制放射状孔道的形貌和尺寸.     

空心介孔WO3球的制备及光催化性能

采用喷雾干燥法制备中空偏钨酸铵球,通过调整热处理温度制备空心介孔WO3球。结果表明:具有Keggin结构的[H2W12O40]6-金属簇的破坏温度区间为417~439℃;在热处理温度为500、550℃,仍有少量的铵根和结合水没有分解,除了WO3外,还存在(NH4)0.06WO3(H2O)0.11;当热处理温度在600℃以上时,偏钨酸铵完全分解为WO3;热处理温度为700℃,保温时间为2h,得到空心介孔WO3球。其形成机理为:空心的偏钨酸铵球,在热处理过程中由于各亚晶的位向不一致,各亚晶沿着[002]晶向择优生长,亚晶形成狭长颗粒,从而在空心球表面形成了介孔;但当热处理温度为800℃,保温时间为2 h,晶粒与晶粒之间通过合并而长大,孔道也随之消失;空心介孔WO3球具有良好的光催化效果,500 W高压汞灯照射150 min甲基蓝的降解率为65.9%。     

Mesoporous TiO2 core-shell spheres composed of nanocrystals with exposed high-energy facets: facile synthesis and formation mechanism

A facile new method that combines electrospray and hydrothermal treatment is used to prepare mesoporous core-shell TiO(2) spheres with high specific surface areas and high pore volumes. Interestingly, the resulting TiO(2) spheres are composed of anatase TiO(2) nanocrystals with exposed step-like {001} and smooth {010} facets. The percentage of exposed {001} facets can be adjusted by changing the experimental parameters used in the electrospray and hydrothermal treatment processes, such as the contents of poly(N-vinyl-2-pyrrolidone) and acetic acid. The combination of high specific surface area (>100 m(2) g(-1)), high pore volume (>0.30 cm(3) g(-1)), useful pore size (10-15 nm), spherical core-shell structure, and exposed high energy facets makes these TiO(2) spheres an important candidate for use in many photoelectrochemical applications. The formation mechanism of the mesoporous TiO(2) spheres is also studied. The great advantage of this method is that interesting and complicated mesoporous superstructures can be prepared using electrospray technology.     

Formation of colloidal CuO nanocrystallites and their spherical aggregation and reductive transformation to hollow Cu2O nanospheres

In this work, we demonstrate that cuprous oxide Cu(2)O nanospheres with hollow interiors can be fabricated from a reductive conversion of aggregated CuO nanocrystallites without using templates. A detailed process mechanism has been revealed: (i) formation of CuO nanocrystallites; (ii) spherical aggregation of primary CuO crystallites; (iii) reductive conversion of CuO to Cu(2)O; and (iv) crystal aging and hollowing of Cu(2)O nanospheres. In this template-free process, Ostwald ripening is operative in (iv) for controlling crystallite size in shell structures and thus for precisely tuning the optical band gap energy (E(g)) of resultant semiconductor nanostructures. For the first time, a wealth of colorful Cu(2)O hollow nanospheres (outer diameters in 100-200 nm), with variable E(g) in the range of 2.405-2.170 eV, has been fabricated via this novel chemical route. Considering their unique hollow structure and facile tuning in band gap energy, the prepared Cu(2)O hollow spheres can be potentially useful for harvesting solar energy in the visible range. Possibility of fabrication of Cu-Cu(2)O nanocomposites has also been discussed.     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

Synthesis, characterization, and optical properties of well-defined N-doped, hollow silica/titania hybrid microspheres

Well-defined nitrogen-doped, hollow SiO2/TiO2 hybrid spheres were successfully prepared through a two-step sol-gel synthesis combined calcination process using triethylamine as the nitrogen source. In this approach, polystyrene (PS)/silica microspheres were first synthesized. Subsequently, the amine-treated PS/SiO2/TiO2 hybrid spheres were obtained by sol-gel method. Finally, the elimination of the PS core, nitrogen-doping process, and crystallization of amorphous TiO2 were simultaneously conducted in the calcination process to acquire the final products. The as-prepared hybrid spheres were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The results of XRD, FTIR, and XPS spectra indicated that nitrogen was really doped into the anatase TiO2 shell and confirmed that most nitrogen dopants might be present in the chemical environments of N-Ti-O and Ti-N-O. It was found that the absorption shoulder of nitrogen-doped hollow SiO2/TiO2 hybrid spheres vastly shifted to the visible region up to around 530 nm. The photoluminescence (PL) bands showed spectral lines at about 421, 472, and 529 nm, which were attributed to the self-trapped excitons, F and F+ centers. Moreover, the intensity of the PL spectra band of hollow SiO2/TiO2 hybrid spheres increased with as the amount of titanium tetrabutoxide (TBOT) precursor increased. However, the doping of nitrogen into hollow SiO2/TiO2 hybrid spheres led to the drastic quenching of photoluminescence because of the increase in the separation efficiency of the photoinduced electron and hole pairs.     

One-step fabrication and high photocatalytic activity of porous TiO2 hollow aggregates by using a low-temperature hydrothermal method without templates

Porous TiO2 hollow aggregates have been synthesized on a large scale by means of a simple hydrothermal method without using any templates. The as-prepared products were characterized by means of field emission scanning electron microscopy, XRD, TEM, nitrogen adsorption, UV/Vis diffuse reflectance spectroscopy, and FTIR spectroscopy. The photocatalytic activity of the aggregates was demonstrated through the photocatalytic degradation of Rhodamine B. Structural characterization indicates that the porous TiO2 aggregates are 500-800 nm in diameter and display mesoporous structure. The average pore sizes and BET surface areas of the aggregates are 12 nm and 168 m2 g-1, respectively. Optical adsorption investigations show that the aggregates possess an optical band-gap energy of 3.36 eV. The as-prepared products were substantially more effective photocatalysts than the commercially available photocatalyst P25. The dye degradation rate of the porous TiO2 hollow aggregates is more than twice that of P25. The high photoactivities of the aggregates can be attributed to the combined effects of several factors, namely, large surface areas, the existence of mesopores, and the high band-gap energy. In addition, the as-prepared products can be easily recycled.     

以纳米微晶纤维素为模板的酸催化水解法制备球形介孔TiO_2

以纳米微晶纤维素(NCC)为模板剂,采用酸催化水解法制备了球形介孔TiO2(SP-TiO2).并采用扫描电镜、透射电镜、X射线衍射、紫外-可见漫反射光谱和低温N2吸附-脱附等手段对其进行了表征.结果表明,所制SP-TiO2为直径100～200nm的规整球形颗粒,单个球形颗粒由粒径为10～20nm的TiO2小晶粒组成.其介孔孔径为8.2～13.5nm,且随焙烧温度的升高而增大.NCC长链结构之间羟基键合所形成的狭小空间构成的微反应器,可有效限制TiO2前驱体的生长和团聚,诱导其晶粒自组装成球形结构,并抑制由锐钛矿相向金红石相转变.600oC焙烧的SP-TiO2表现出最高的光催化活性,对苯酚降解率达89%.     

Control of TiO2 structures from robust hollow microspheres to highly dispersible nanoparticles in a tetrabutylammonium hydroxide solution

A new process for controlling the structure of TiO2 from hollow microspheres to highly dispersible nanoparticles has been developed by altering the concentration of tetrabutylammonium hydroxide (TBAH) in the solvothermal reaction of titanium isopropoxide. Robust and size-controllable hollow TiO2 microspheres, constructed by the assembly of 18 nm TiO2 nanoparticles, were synthesized at relatively high TBAH concentration. The diameters of hollow spheres, with a shell thickness of approximately 250 nm, were controlled to 1.5-4 microm by varying the concentration of TBAH in the range of 0.1-0.5 M. After calcination at 450 degrees C, the hollow microspheres were not appreciably deformed and were still floating on the surface of the water. However, highly dispersible TiO2 nanoparticles with an average diameter of 13 nm were obtained at a low TBAH concentration such as 9.2 mM. The colloidal particle size of TiO2 in an aqueous suspension at pH 2 was 12.5-13.5 nm, which indicates that the each nanoparticle is completely separated. The overall procedure is simple and highly reproducible, and large-scale synthesis is available at low cost.     

Facile fabrication and optical property of hollow SnO2 spheres and their application in water treatment

Hollow SnO(2) spheres with smooth surface have been fabricated by a low temperature template-free solution phase route via self-assembly of small nanocrystalline particles. These hollow spheres have a very thin shell thickness of about 10 nm and are built from SnO(2) nanocrystals of an average size of 5.3 nm. The evacuation behavior of inside-out Ostwald ripening can be used to explain the formation of hollow spheres according to results of time-dependent reactions. The cathodoluminescence spectrum indicates a blue shift of the band gap emission peak of SnO(2), originating from quantum confinement effect due to the nanoscale size of SnO(2) particles. The as-prepared SnO(2) hollow spheres were also found to exhibit excellent performance in wastewater treatment.     

Solvothermal synthesis of hollow ZnS spheres

Mono-dispersed semiconductor ZnS hollow spheres with the diameter of 300-500 nm and the shell thickness of about 100-150 nm have been synthesized successfully by solvothermal method from ethanol solution in the presence of a special surfactant-quaternary ammonium salt of 2-undecyl-1-dithioureido-ethyl-imidazoline (SUDEI) made in our lab. The mono-dispersed ZnS hollow spheres are characterized by XRD, size distribution investment, UV-vis, TEM, and SEM, respectively. The UV-vis measurement indicates that there is a broad absorption at 210-280 nm, which is likely to be caused by "hollow-effect." A growth mechanism of ZnS hollow spheres has also been put forward and discussed.     

Optical and gas sensing properties of mesoporous hollow ZnO microspheres fabricated via a solvothermal method

Mesoporous,hollow Zn O microspheres were synthesized via a hydrothermal method,using glycerol and zinc acetate as the starting materials.XRD and FESEM analysis showed that the surface morphology of the spheres with a Wurtzite structure could be reasonably adjusted by varying the weight ratio(Rw) of Zn(CH3COO)2 2H2O:H2O:C3H8O3.The responses of the gas sensor based on the spheres to 100 ppm ethanol and 100 ppm acetone are 18.9 and 10.4,respectively.The response and recovery times of the sensor to ethanol and acetone are 2 s and 3 s,3 s and 5 s,respectively.The hollow spheres show an intense UV emission at 392 nm and a broad blue-green emission at 488 nm.Interestingly,a light trapping phenomenon is revealed by UV emission and scattering measurements on the microspheres,which can be attributed to the mesoporous shell and hollow structure of the microsphere.     

孔隙结构可调的Cu2O球状纳米结构及其NO2气体传感性质

报道在聚乙烯吡咯烷酮(PVP)的协助作用下,通过简单调节OH^-离子的浓度及Cu²⁺的释放速度,将Cu₂O调节为具有不同空腔特征(介孔、空心及实心)结构的纳米球.研究表明, OH^-根离子的扩散动力学是决定产物结构的关键因素.当[OH^-] > 0.05 mol·L^-1时,高的化学势使其迅速扩散到PVP胶团内部,与吸附在PVP链上的Cu²⁺反应形成Cu(OH)₂,在抗坏血酸(Vc)的还原作用下经过重结晶得到Cu₂O实心球纳米结构;当[OH^-] < 0.025 mol·L^-1时,其扩散速度下降,首先与吸附在PVP胶团外部的Cu²⁺反应形成Cu(OH)₂, Cu(OH)₂的形成阻碍了OH^-离子的向内扩散,形成具有较大空腔(~220 nm)的空心球;当0.025 mol·L^-1 < [OH^-] < 0.05 mol·L^-1时,形成较小空腔(30-60 nm)的空心球.以NH₃水为OH^-缓释源时,虽然OH^-浓度较低,但同时Cu²⁺的浓度也低,胶团外部形成的Cu(OH)₂不足以阻碍OH^-离子的向内扩散,反应过程中NH₃的释放及较低的OH^-浓度阻碍了重结晶的发生,从而形成Cu₂O介孔纳米球.对三种典型结构特征的产物进行了NO₂气体传感性质研究,结果表明, Cu₂O介孔纳米球相比空心结构和实心结构具有更为优异的响应性.结合比表面积数据,我们认为介孔纳米球疏散的结构有利于NO₂气体的扩散和O₂的吸附,从而表现出了更灵敏的气体传感性.     

ZnS:Mn2+/聚苯乙烯核壳及ZnS:Mn2+中空球的制备和光谱性质

ZnS:Mn2+ polystyrene (PS) core-shell structures and ZnS:Mn2+ hollow spheres were prepared by a sonoehemical deposition approach. Transmission electron micrograph (TEM) studies show that the PS surface is covered by a thin shell consisted of ZnS: Mn2+ nanoparticles with an average size of 9 nm. ZnS: Mn2+ hollow spheres were obtained by heating the core-shell particles in air at 500 ℃ to drive off PS. The photoluminescence spectrum for the emission band of Mn2+ peaked at 540 nm, and a 45 nm blue shift compared to that of corresponding bulk sample, was discussed based on the Mn-O octahedral distortion induced by shell structure.     

Preparation, structure, and magnetic properties of mesoporous magnetite hollow spheres

Preparation of mesoporous Fe3O4 (magnetite) hollow spheres has been reported using hydrothermal synthesis and calcinations. The carboxyl-functionalized PS spheres were used as the templates coated by Fe3O4 particles and ethylene glycol (EG) as an organic structure directing agent. PS and EG were removed by calcinations method. The surface area after calcination at 500 degrees C is found to be 74 m(2) g(-1). The hollow spheres exhibited the weak ferromagnetism.     

Biomolecule-assisted route to prepare titania mesoporous hollow structures

Amino acids, as a particularly important type of biomolecules, have been used as multifunctional templates to intelligently construct mesoporous TiO(2) hollow structures through a simple solvothermal reaction. The structure-directing behaviors of various amino acids were systematically investigated, and it was found that these biomolecules possess the general capability to assist mesoporous TiO(2) hollow-sphere formation. At the same time, the nanostructures of the obtained TiO(2) are highly dependent on the isoelectric points (pI) of amino acids. Their molecular-structure variations can lead to pI differences and significantly influence the final TiO(2) morphologies. Higher-pI amino acids (e.g., L-lysine and L-arginine) have better structure-directing abilities to generate nanosheet-assembled hollow spheres and yolk/shell structures. The specific morphologies and mesopore size of these novel hollow structures can also be tuned by adjusting the titanium precursor concentration. Heat treatment in air and vacuum was further conducted to transform the as-prepared structures to porous nanoparticle-assembled hollow TiO(2) and TiO(2)/carbon nanocomposites, which may be potentially applied in the fields of photocatalysts, dye-sensitized solar cells, and Li batteries. This study provides some enlightenment on the design of novel templates by taking advantage of biomolecules.     

Synthesis and growth mechanism of titanate and titania one-dimensional nanostructures self-assembled into hollow micrometer-scale spherical aggregates

Three-dimensional, dendritic micrometer-scale spheres of alkali metal hydrogen titanate 1D nanostructures (i.e., nanowires and nanotubes) have been generated using a modified hydrothermal technique in the presence of hydrogen peroxide and an alkali metal hydroxide solution. Sea-urchin-like assemblies of these 1D nanostructures have been transformed into their hydrogen titanate analogues (lepidocrocite HxTi2-x/4squarex/4O4 (x approximately 0.7, square: vacancy)) by neutralization as well as into their corresponding anatase TiO2 nanostructured counterparts through a moderate high-temperature annealing dehydration process without destroying the 3D hierarchical structural motif. The as-prepared hollow spheres of titanate and titania 1D nanostructures have overall diameters, ranging from 0.8 to 1.2 microm, while the interior of these aggregates are vacuous with a diameter range of 100 to 200 nm. The constituent, component titanate and TiO2 1D nanostructures have a diameter range of 7+/-2 nm and lengths of up to several hundred nanometers. A proposed two-stage growth mechanism of these hollow micrometer-scale spheres was supported by time-dependent scanning electron microscopy, atomic force microscopy, and inductively coupled plasma atomic emission spectrometry data. We have also demonstrated that these assemblies are active photocatalysts for the degradation of synthetic Procion Red dye under UV light illumination.