Ruthenium agostic (phosphinoaryl)borane complexes: multinuclear solid-state and solution NMR, X-ray, and DFT studies

The reactivity of the (o-phosphinophenyl)(amino)borane compound HB(N(i)Pr(2))C(6)H(4)(o-PPh(2)) prepared from Li(C(6)H(4))PPh(2) and HBCl(N(i)Pr(2)) toward the bis(dihydrogen) complex RuH(2)(H(2))(2)(PCy(3))(2) (1) was studied by a combination of DFT, X-ray, and multinuclear NMR techniques including solid-state NMR, a technique rarely employed in organometallic chemistry. The study showed that the complex RuH(2){HB(N(i)Pr(2))C(6)H(4)(o-PPh(2))}(PCy(3))(2) (3), isolated in excellent yield as yellow crystals and characterized by X-ray diffraction, led in solution to PCy(3) dissociation and formation of an unsaturated 16-electron complex RuH(2){HB(N(i)Pr(2))C(6)H(4)(o-PPh(2))}(PCy(3)) (4), with a hydride trans to a vacant site. In both cases, the (phosphinoaryl)(amino)borane acts as a bifunctional ligand through the phosphine moiety and a Ru-H-B interaction, thus featuring an agostic interaction.     

Preparation and characterization of ruthenium(II) monophosphaferrocene complexes. Reactivity, dynamic solution behavior, and X-ray structure of [RuH(2)(eta(2)-H(2))(PCy(3))2(2-phenyl-3,4-dimethylphosphaferrocene)

The bis(dihydrogen) complex RuH(2)(H(2))(2)(PCy(3))(2) (1) reacts with 2-phenyl-3,4-dimethylphosphaferrocene (L(1)) to give RuH(2)(H(2))(PCy(3))(2)(L(1)) (2). This dihydride-dihydrogen complex has been characterized by X-ray crystallography and variable-temperature (1)H and (31)P NMR spectroscopy. The exchange between the dihydrogen ligand and the two hydrides is characterized by a DeltaG() of 46.2 kJ/mol at 263 K. H/D exchange is readily observed when heating a C(7)D(8) solution of 2 (J(H-D) = 30 Hz). The H(2) ligand in 2 can be displaced by ethylene or carbon monoxide leading to the corresponding ethylene or carbonyl complexes. The reaction of 1 with 2 equiv of 3,4-dimethylphosphaferrocene (L(2)) yields the dihydride complex RuH(2)(PCy(3))(2)(L(2))(2) (5).     

Rhodium boryl complexes in the catalytic, terminal functionalization of alkanes

A series of studies have been conducted by experimental and theoretical methods on the synthesis, structures, and reactions of CpRh boryl complexes that are likely intermediates in the rhodium-catalyzed regioselective, terminal functionalization of alkanes. The photochemical reaction of CpRh(eta(6)-C(6)Me(6)) with pinacolborane (HBpin) generates the bisboryl complex CpRh(H)(2)(Bpin)(2) (2), which reacts with neat HBpin to generate CpRh(H)(Bpin)(3) (3). X-ray diffraction, density functional theory (DFT) calculations, and NMR spectroscopy suggest a weak, but measurable, B-H bonding interaction. Both 2 and 3 dissociate HBpin and coordinate PEt(3) or P(p-Tol)(3) to generate the conventional rhodium(III) species CpRh(PEt(3))(H)(Bpin) (4) and CpRh[P(p-tol)(3)](Bpin)(2) (5). Compounds 2 and 3 also react with alkanes and arenes to form alkyl- and arylboronate esters at temperatures similar to or below those of the catalytic borylation of alkanes and arenes. Further, these compounds were observed directly in catalytic reactions. The enthalpies and free energies for generation of the 16-electron intermediate and for the C-H bond cleavage and B-C bond formation have been calculated with DFT. These results strongly suggest that the C-H bond cleavage process occurs by a metal-assisted sigma-bond metathesis mechanism to generate a borane complex that isomerizes if necessary to place the alkyl group cis to the boryl group. This complex with cis boryl and alkyl groups then undergoes B-C bond formation by a second sigma-bond metathesis to generate the final functionalized product.     

Stereochemical nonrigidity of a chiral rhodium boryl hydride complex: a sigma-borane complex as transition state for isomerization

Experimental and computational studies are reported on half-sandwich rhodium complexes that undergo B-H bond activation with pinacolborane (HBpin = HB(OCMe2CMe2O)). The photochemical reaction of [Rh(eta5-C5H5)(R,R-phospholane)(C2H4)] 3 (phospholane = PhP(CHMeCH2CH2CHMe)) with HBpin generates the boryl hydride in two distinguishable isomers [(SRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5a and [(RRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5b that undergo intramolecular exchange. The presence of a chiral phosphine allowed the determination of the interconversion rates (epimerization) by 1D 1H EXSY spectroscopy in C6D6 solution yielding DeltaH = 83.4 +/- 1.8 kJ mol-1 for conversion of 5a to 5b and 79.1 +/- 1.4 kJ mol-1 for 5b to 5a. Computational analysis yielded gas-phase energy barriers of 96.4 kJ mol-1 determined at the density functional theory (DFT, B3PW91) level for a model with PMe3 and B(OCH2CH2O) ligands; higher level calculations (MPW2PLYP) on an optimized QM/MM(ONIOM) geometry for the full system place the transition state 76.8 kJ mol-1 above the average energy of the two isomers. The calculations indicate that the exchange proceeds via a transition state with a sigma-B-H-bonded borane. The B-H bond lies in a mirror plane containing rhodium and phosphorus. No intermediate with an eta2-B-H ligand is detected either by experiment or calculation. Complex 3 has also been converted to the [Rh(eta5-C5H5)Br2(R,R-phospholane)] (characterized crystallographically) and [Rh(eta5-C5H5)(H)2(R,R-phospholane)]. The latter exhibits two inequivalent hydride resonances that undergo exchange with DeltaH = 101 +/- 2 kJ mol-1. DFT calculations indicate that the boryl hydride complex has a lower exchange barrier than the dihydride complex because of steric hindrance between the phospholane and Bpin ligands in the boryl hydride.     

Dihydrogen activation by a diruthenium analogue of the Fe-only hydrogenase active site

The photochemical reaction of Ru2(S2C3H6)(CO)4(PCy3)2 (1) and H2 gives the dihydride Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 (2). NMR and crystallographic studies reveal mutually trans basal phosphine ligands and both bridging and terminal hydrides. Ru2(S2C2H4)(CO)4(PCy3)2 behaves similarly. Other HX substrates undergo photoaddition to 1, affording Ru2(S2C3H6)(mu-H)(X)(CO)3(PCy3)2 for X = OTs (3a), Cl (3b), and SPh (3c). Treatment of Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 with [H(OEt2)]BArF4 (ArF = B(C6H3-3,5-(CF3)2) in CD2Cl2 gives [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(H2)]+ (4), which catalyzes H2-D2 exchange. The reaction of 2 with [D(OEt2)]BArF4 gave [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(HD)]+ (JH-D = 31 Hz). These studies provide the first models for the Fe-only hydrogenases that bear dihydrogen and terminal hydrido ligands.     

Trialkylboron/lanthanide metallocene hydride chemistry: polydentate bridging of (HBEt3)- to lanthanum

The reaction of [(C(5)Me(5))(2)LaH](x) with BEt(3) is reported, and the solid-state structures of the lanthanum product (C(5)Me(5))(2)La[(mu-H)(mu-Et)(2)BEt], 1, and its THF adduct (C(5)Me(5))(2)La(THF)[(mu-H)(mu-Et)BEt(2)], 2, are compared with that of the hydride-bridged "tuckover" complex (C(5)Me(5))(2)La(mu-H)(mu-eta(1):eta(5)-CH(2)C(5)Me(4))La(C(5)Me(5)), 3.     

Steric effects in metathesis and reduction reactions of phosphinimines with catechol- and pinacolboranes

A series of catecholboryl-phosphinimide complexes with the general formula (mu-(R(3)PN)Bcat)(x)() (cat = O(2)C(6)H(4)) have been synthesized via associative metathetical reactions. For R = Et, n-Bu, Ph, and i-Pr and R(3) = n-Bu t-Bu(2) X-ray crystallography as well as solution NMR spectroscopy and reactivity studies reveal that these species are dimeric. In the case of R = t-Bu, the steric congestion results in the monomeric species, t-Bu(3)PNBcat. Similarly, reactions of R(t-Bu)(2)PNH (R = n-Bu, t-Bu) and i-Pr(3)PNH with pinacolborane (HBO(2)C(2)Me(4) = HBpin) led to the formation of n-Bu(t-Bu(2))PNBpin, t-Bu(3)PNBpin, and i-Pr(3)PNBpin. Analogous reactions of smaller phosphinimines R(3)PNH (R = Et or n-Bu) with pinacolborane (HBpin) generated free phosphine and the boron-containing product HN(Bpin)(2). In the related reactions of R(3)PNPh or R(3)PNAd (R = Et and n-Bu) and HBpin, the white crystalline solids PhHN(Bpin) or AdHN(Bpin) were isolated. HN(Bpin)(2) was also derived from the reaction of Et(3)PNSiMe(3) and HBpin. Kinetic studies showed this reaction is first order in both reagents with a rate constant of 1.3(7) x 10(-4) s(-1). A mechanism involving a 1:1 donor-acceptor interaction of the phosphinimine and borane affording reduction of the phosphinimine to phosphine with concurrent formation of borylamine is proposed. Computational studies were performed to probe the steric effects on these reactions of phosphinimine and borane. Model reactions involving t-Bu(3)PNH showed a lower activation barrier for protonolysis in comparison to phosphinimine reduction. In contrast, for the smaller phosphinimine H(3)PNH, the activation barriers for phosphinimine reduction are lower. The causes of these steric effects are considered.     

Four-coordinate, 14-electron Ru(II) complexes: unusual trigonal pyramidal geometry enforced by bis(phosphino)silyl ligation

Unprecedented diamagnetic, four-coordinate, formally 14-electron (Cy-PSiP)RuX (Cy-PSiP = [κ(3)-(2-R(2)PC(6)H(4))(2)SiMe](-); X = amido, alkoxo) complexes that do not require agostic stabilization and that adopt a highly unusual trigonal pyramidal coordination geometry are reported. The tertiary silane [(2-Cy(2)PC(6)H(4))(2)SiMe]H ((Cy-PSiP)H) reacted with 0.5 [(p-cymene)RuCl(2)](2) in the presence of Et(3)N and PCy(3) to afford [(Cy-PSiP)RuCl](2) (1) in 74% yield. Treatment of 1 with KO(t)Bu led to the formation of (Cy-PSiP)RuO(t)Bu (2, 97% yield), which was crystallographically characterized and shown to adopt a trigonal pyramidal coordination geometry in the solid state. Treatment of 1 with NaN(SiMe(3))(2) led to the formation of (Cy-PSiP)RuN(SiMe(3))(2) (3, 70% yield), which was also found to adopt a trigonal pyramidal coordination geometry in the solid state. The related anilido complexes (Cy-PSiP)RuNH(2,6-R(2)C(6)H(3)) (4, R = H; 5, R = Me) were also prepared in >90% yields by treating 1 with LiNH(2,6-R(2)C(6)H(3)) (R = H, Me) reagents. The solid state structure of 5 indicates a monomeric trigonal pyramidal complex that features a C-H agostic interaction. Complexes 2 and 3 were found to react readily with 1 equiv of H(2)O to form the dimeric hydroxo-bridged complex [(Cy-PSiP)RuOH](2) (6, 94% yield), which was crystallographically characterized. Complexes 2 and 3 also reacted with 1 equiv of PhOH to form the new 18-electron η(5)-oxocyclohexadienyl complex (Cy-PSiP)Ru(η(5)-C(6)H(5)O) (7, 84% yield). Both amido and alkoxo (Cy-PSiP)RuX complexes reacted with H(3)B·NHRR' reagents to form bis(σ-B-H) complexes of the type (Cy-PSiP)RuH(η(2):η(2)-H(2)BNRR') (8, R = R' = H; 9, R = R' = Me; 10, R = H, R' = (t)Bu), which illustrates that such four-coordinate (Cy-PSiP)RuX (X = amido, alkoxo) complexes are able to undergo multiple E-H (E = main group element) bond activation steps. Computational methods were used to investigate structurally related PCP, PPP, PNP, and PSiP four-coordinate Ru complexes and confirmed the key role of the strongly σ-donating silyl group of the PSiP ligand set in enforcing the unusual trigonal pyramidal coordination geometry featured in complexes 2-5, thus substantiating a new strategy for the synthesis of low-coordinate Ru species. The mechanism of the activation of ammonia-borane by such low-coordinate (R-PSiP)RuX (X = amido, alkoxo) species was also studied computationally and was determined to proceed most likely in a stepwise fashion via intramolecular deprotonation of ammonia and subsequent borane B-H bond oxidative addition steps.     

An unprecedented, reversible coordination mode rearrangement: eta3(B-H) vs.eta1(Sn) stanna-closo-dodecaborate coordination

The synthesis of the ruthenium stanna-closo-dodecaborate complex [Bu(3)MeN](2)[Ru(dppb)(MeCN)(2)(SnB(11)H(11))(2)] by an unprecedented, reversible eta(3)(B-H) to eta(1)(Sn) rearrangement of [Bu(3)MeN](2)[Ru(dppb)(SnB(11)H(11))(2)] is described and the product is characterized by multinuclear NMR spectroscopy and single-crystal X-ray diffraction.     

A terminal borylene ruthenium complex: from B-H activation to reversible hydrogen release

Starting from RuHCl(H2)(PCy3)2, a terminal ruthenium mesitylborylene complex was obtained via double B-H bond activation of mesitylborane and concomitant release of dihydrogen, such a process being remarkably reversible.     

A succession of isomers of ruthenium dihydride complexes. Which one is the ketone hydrogenation catalyst?

Reaction of RuHCl(PPh(3))(2)(diamine) (1a, diamine = (R,R)-1,2-diaminocyclohexane, (R,R)-dach; 1b, diamine = ethylenediamine, en) with KO(t)Bu in benzene quickly generates solutions of the amido-amine complexes RuH(PPh(3))(2)(NHC(6)H(10)NH(2)), (2a'), and RuH(PPh(3))(2)(NHCH(2)CH(2)NH(2)), (2b'), respectively. These solutions react with dihydrogen to first produce the trans-dihydrides (OC-6-22)-Ru(H)(2)(PPh(3))(2)(diamine) (t,c-3a, t,c-3b). Cold solutions (-20 degrees C) containing trans-dihydride t,c-3a react with acetophenone under Ar to give (S)-1-phenylethanol (63% ee). Complexes t,c-3 have lifetimes of less than 10 min at 20 degrees and then isomerize to the cis-dihydride, cis-bisphosphine isomers (OC-6-32)-Ru(H)(2)(PPh(3))(2)(diamine) (Delta/Lambda-c,c-3a, c,c-3b). A solution containing mainly Delta/Lambda-c,c-3a reacts with acetophenone under Ar to give (S)-1-phenylethanol in 20% ee, whereas it is an active precatalyst for its hydrogenation under 5 atm H(2) to give 1-phenylethanol with an ee of 50-60%. Complexes c,c-3 isomerize to the cis-dihydride, trans-bisphosphine complexes (OC-6-13)-Ru(H)(2)(PPh(3))(2)(diamine) (c,t-3a, c,t-3b) with half-lives of 40 min and 1 h, respectively. A mixture of Delta/Lambda-c,c-3a and c,t-3a can also be obtained by reaction of 1a with KBH(Bu(sec))(3). A solution of complex c,t-3a in benzene under Ar reacts very slowly with acetophenone. These results indicate that the trans-dihydrides t,c-3a or t,c-3b along with the corresponding amido-amine complexes 2a' or 2b' are the active hydrogenation catalysts in benzene, while the cis-dihydrides c,c-3a or c,c-3b serve as precatalysts. The complexes RuCl(2)(PPh(3))(2)((R,R)-dach) or 1a, when activated by KO(t)Bu, are also sources of the active catalysts. A study of the kinetics of the hydrogenation of acetophenone in benzene catalyzed by 3a indicates a rate law: rate = k[c,c-3a](initial)[H(2)] with k = 7.5 M(-1) s(-1). The turnover-limiting step appears to be the reaction of 2a' with dihydrogen as it is for RuH(NHCMe(2)CMe(2)NH(2))(PPh(3))(2) (2c'). The catalysts are more active in 2-propanol, even without added base, and the kinetic behavior is complicated. The basic cis-dihydride c,t-3a reacts with [NEt(3)H]BPh(4) to produce the dihydrogen complex (OC-14)-[Ru(eta(2)-H(2))(H)(PPh(3))(2)((R,R)-dach)]BPh(4) (4) and with diphenylphosphinic acid to give the complex RuH(O(2)PPh(2))(PPh(3))(2)((R,R)-dach) (5). The structure of 5 models aspects of the transition state structure for the ketone hydrogenation step. Complex 2b' decomposes rapidly under Ar to give dihydrides 3b along with a dinuclear complex (PPh(3))(2)HRu(mu-eta(2);eta(4)-NHCHCHNH)RuH(PPh(3))(2) (6) containing a rare, bridging 1,4-diazabutadiene group. The formation of an imine by beta-hydride elimination from the amido-amine ligand of 2a' under Ar might explain some loss of enantioselectivity of the catalyst. The structures of complexes 1a, 5, and 6 have been determined by single-crystal X-ray diffraction.     

Influence of media and homoconjugate pairing on transition metal hydride protonation. An IR and DFT study on proton transfer to CpRuH(CO)(PCy3)

The interaction of the ruthenium hydride complex CpRuH(CO)(PCy(3)) (1) with proton donors HOR of different strength was studied in hexane and compared with data in dichloromethane. The formation of dihydrogen-bonded complexes (2) and ion pairs stabilized by hydrogen bonds between the dihydrogen ligand and the anion (3) was observed. Kinetics of the interconversion from 2 to 3 was followed at different (CF(3))(3)COH concentrations between 200 and 240 K. The activation enthalpy and entropy values for proton transfer from the dihydrogen-bonded complex 2 to the (eta(2)-H(2))-complex 3 (DeltaH() = 11.0 +/- 0.5 kcal/mol and DeltaS() = -19 +/- 3 eu) were obtained for the first time. The results of the DFT study of the proton transfer process, taking CF(3)COOH and (CF(3))(3)COH as a proton donors and introducing solvent effects in the calculation with the PCM method, are presented. The role of homoconjugate pairs [ROHOR](-) in the protonation is analyzed by means of the inclusion of an additional ROH molecule in the calculations. The formation of the free cationic complex [CpRu(CO)(PCy(3))(eta(2)-H(2))](+) is driven by the formation of the homoconjugated anionic complex [ROHOR](-). Solvent polarity plays a significant role stabilizing the charged species formed in the process. The theoretical study also accounts for the dihydrogen release and production of CpRu(OR)(CO)(PCy(3)), observed at temperatures above 250 K.     

Synthesis, neutron structure, and reactivity of the bis(dihydrogen) complex RuH2(eta(2)-H2)2(PCyp3)2 stabilized by two tricyclopentylphosphines

Treatment of Ru(eta4-C8H12)(eta6-C8H10) with 3 bar H2 in the presence of 2 equiv of tricyclopentylphosphine (PCyp3) in pentane resulted in the isolation of the new bis(dihydrogen) complex RuH2(eta2-H2)2(PCyp3)2 (2), characterized by NMR and single-crystal X-ray and neutron diffraction. The single-crystal neutron diffraction study is the first carried out for a bis(dihydrogen) complex. The coordination geometry around the metal center is a distorted octahedron defined by the two phosphines in a trans configuration (making an angle of 168.9(1) degrees ), two cis dihydrogen ligands, and two hydrides trans to them, defining the equatorial plane. The H-H bond distances (0.825(8) and 0.835(8) A) are characteristic of two "unstretched" dihydrogen ligands. H/D exchange between the Ru-H and the C-D bonds of deuterated benzene is observed within 1 h, leading to the formation of various isotopomers RuHxD6-x(PCyp3)2 (with x = 0-6). 2 is a catalyst precursor for ethylene coupling (20 bar, 293 K) to a functionalized arene (Murai reaction). We found a 90% conversion of acetophenone to 2-ethylacetophenone within 35 min, whereas 10 h was needed in the same conditions using the analogous tricyclohexylphosphine complex, RuH2(eta2-H2)2(PCy3)2, the best catalyst precursor, at room temperature, prior to this work.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.     

Synthesis,structural characterization,and reactions of cyclic organohydroborate half-zirconocene compounds

Cyclic organohydroborate complexes of zirconium monocyclopentadienyl CpZr[(mu-H)(2)BC(5)H(10)](3), 1, and CpZr[(mu-H)(2)BC(8)H(14)](3), 2, were prepared from the reaction of CpZrCl(3) with 3 mol of K[H(2)BC(5)H(10)] and K[H(2)BC(8)H(10)], respectively, in diethyl ether. Compounds 1 and 2 react with the hydride ion abstracting agent B(C(6)F(5))(3) to form the same salt [CpZr(OEt)(OEt(2))(mu-OEt)](2)[HB(C(6)F(5))(3)](2), 5. The complexes CpZr(Cl)[(mu-H)(2)BC(8)H(14)](2), 3, and CpZr(Cl)[(mu-H)(2)BC(8)H(14)](2) [where Cp = C(5)(CH(3))(5)], 4, were prepared from the reaction of CpZrCl(3) and CpZrCl(3) with K[H(2)BC(8)H(10)] in 1:2 molar ratios, respectively. An alpha-hydrogen of a BC(8)H(14) unit forms an agostic interaction with Zr in compound 3 but not in 4. All of the compounds were characterized by single-crystal X-ray diffraction analysis.     

Reduction of dinitrogen with an yttrium metallocene hydride precursor, [(C5Me5)2YH]2

Treatment of [(C(5)Me(5))(2)YH](2), 1, with KC(8) under N(2) in methylcyclohexane generates the unsolvated reduced dinitrogen complex, [(C(5)Me(5))(2)Y](2)(μ-η(2):η(2)-N(2)), 2, and extends the range of yttrium and lanthanide LnZ(2)Z'/M (Z = monoanion; M = alkali metal) dinitrogen reduction reactions to (Z')(-) = (H)(-). The hydride complex, 1, is unique in this reactivity compared to other alkane-soluble yttrium metallocenes, [(C(5)Me(5))(2)YX](x) {X = [N(SiMe(3))(2)](-), (Me)(-), (C(3)H(5))(-), and (C(5)Me(5))(-)} which did not generate 2 when treated with KC(8). [(C(5)Me(5))(2)LnH](x)/KC(8)/N(2) reactions with Ln = La and Lu did not give isolable dinitrogen complexes. Complex 2 and the unsolvated lutetium analogue, [(C(5)Me(5))(2)Lu](2)(μ-η(2):η(2)-N(2)), 3, were obtained using benzene as a solvent and [(C(5)Me(5))(2)Ln][(μ-Ph)(2)BPh(2)] as precursors with excess KC(8). Complex 2 functions as a reducing agent with PhSSPh to form [(C(5)Me(5))(2)Y(μ-SPh)](2), 4, in high yield.     

Dimethylaminoborane (H2BNMe2) coordination to late transition metal centers: snapshots of the B-H oxidative addition process

The reaction of cyclodiborazane [Me(2)N-BH(2)](2) with the chloro(dihydrogen) ruthenium complex RuHCl(η(2)-H(2))(P(i)Pr(3))(2) (1) led to the formation of the unsymmetricaly coordinated dimethylaminoborane complex RuHCl(H(2)BNMe(2))(P(i)Pr(3))(2) (2). The dimethylaminoborane coordination (H(2)BNMe(2)) to the ruthenium center in 2 was carefully studied by combining X-ray, multinuclear NMR, and density functional theory (DFT) techniques, and compared with the recently reported osmium analogue which was originally formulated as a σ-B-H borinium complex [OsH(2)Cl(HBNMe(2))(P(i)Pr(3))(2)] (4). All our data are in favor of a bis(σ-B-H) coordination mode at a very activated stage in the case of the ruthenium complex 2, whereas in the osmium complex 4, full oxidative addition is favored leading to a complex better formulated as an osmium(IV) boryl species with an α-agostic B-H interaction. The synthesis and characterization of the symmetrical dihydride complex RuH(2)(H(2)BNMe(2))(P(i)Pr(3))(2) (3) from addition of the lithium dimethylaminoborohydride to 1 is reported for comparison.     

Syntheses of mono- and dinuclear diiodoboryl complexes of platinum

Treatment of [Pt(PCy(3))(2)] (Cy = cyclohexyl) with BI(3) afforded trans-[(Cy(3)P)(2)Pt(I)(BI(2))] by the oxidative addition of a B-I bond. The title compound represents the first diiodoboryl complex and was fully characterized by NMR spectroscopy and X-ray diffraction analysis. The latter revealed a very short Pt-B distance, thus indicating a pronounced pi contribution to this bond. By the addition of another 1 equiv of BI(3) to trans-[(Cy(3)P)(2)Pt(I)(BI(2))], a new Pt species [(Cy(3)P)(I(2)B)Pt(mu-I)](2) was formed with concomitant buildup of the phosphine borane adduct [Cy(3)P-BI(3)]. The former is obviously obtained by abstraction of PCy(3) from trans-[(Cy(3)P)(2)Pt(I)(BI(2))] and the subsequent dimerization of two remaining fragments. Interestingly, the dimerization is reversible, and the dinuclear compound can be converted to trans-[(Cy(3)P)(2)Pt(I)(BI(2))] upon the addition of PCy(3).     

Substitution, cage functionalization, and oxidation of the charge-compensated triruthenium monocarbollide cluster complex [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8

The compound [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8] 1a reacts with PMe3 or PCy3(Cy = cyclo-C6H11) to give the structurally different species [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)5(PMe3)}-closo-2,1-RuCB10H8] 4 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)5(PCy3)}-closo-2,1-RuCB10H8]5, respectively. A symmetrically disubstituted product [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)4(PMe3)2}-closo-2,1-RuCB10H8] 6 is obtained using an excess of PMe3. In contrast, the chelating diphosphines 1,1'-(PPh2)2-Fe(eta-C5H4)2 and 1,2-(PPh2)2-closo-1,2-C2B10H10 react with 1a to yield oxidative-insertion species [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(micro-[1',1'-(PPh2)2-Fe(eta-C5H4)2])(CO)4}-closo-2,1-RuCB10H8] 7 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)4(1',2'-(PPh2)2-closo-1',2'-C2B10H10)}-closo-2,1-RuCB10H8] 8, respectively. In toluene at reflux temperatures, 1a with Bu(t)SSBu(t) gives [1-SMe2-2,2-(CO)2-7-(mu-SBu(t))-11-(mu-H)-2,7,11-{Ru2(mu-H)(mu-SBu(t))(CO)4}-closo-2,1-RuCB10H8] 9, and with Bu(t)C [triple bond] CH gives [1-SMe2-2,2-(CO)2-7-{mu:eta2-(E)-CH=C(H)Bu(t)}-11-{mu:eta2-(E)-CH=C(H)Bu(t)}-2,7,11-{Ru2(CO)5}-closo-2,1-RuCB10H8] 10. In the latter, two alkyne groups have inserted into cage B-H groups, with one of the resulting B-vinyl moieties involved in a C-H...Ru agostic bond. Oxidation of 1a with I2 or HgCl2 affords the mononuclear ruthenium complex [1-SMe2-2,2,2-(CO)3-closo-2,1-RuCB10H10] 11.     

The elusive vanadate (V(3)O(9))(3-): isolation, crystal structure, and nonaqueous solution behavior.

The isolation, crystal structure, and nonaqueous solution characteristics of the first trinuclear vanadate are presented. The crystal structure reveals a six-membered cyclic arrangement of alternating vanadium and oxygen atoms for the anion of [(C(4)H(9))(4)N](3)(V(3)O(9)). The (51)V NMR spectrum of this compound in CD(3)CN exhibits multiple peaks. The relative intensities of each resonance can be altered by concentration and temperature changes, the later of which are reversible. Addition of [(C(4)H(9))(4)N]Br and NaClO(4) also perturbs the equilibria between species observed. Conductivity data for [(C(4)H(9))(4)N](3)(V(3)O(9)) in CH(3)CN as a function of concentration display pronounced curvature and indicate formation of a neutral species in solution at the highest concentrations studied. Stoichiometric mixtures of [(C(4)H(9))(4)N](3)(V(3)O(9)) with the known vanadates [(C(4)H(9))(4)N](3)(HV(4)O(12)), [(C(4)H(9))(4)N](3)(V(5)O(14)), and [(C(4)H(9))(4)N](3)(H(3)V(10)O(28)) are prepared and examined by (51)V NMR. Equilibration between the various vanadates is observed and characterized. Resonances for these known vanadates, however, cannot be used to identify the peaks found for [(C(4)H(9))(4)N](3)(V(3)O(9)), alone, in solution. The existence of ion pairs in acetonitrile is the only interpretation for the solution behavior of [(C(4)H(9))(4)N](3)(V(3)O(9)) consistent with all data. As such, we can directly observe each possible ion pairing state by (51)V NMR: (V(3)O(9))(3-) at -555 ppm, [[(C(4)H(9))(4)N](V(3)O(9))] (2-) at -569 ppm, [[(C(4)H(9))(4)N](2)(V(3)O(9))](-) at -576 ppm, and [(C(4)H(9))(4)N](3)(V(3)O(9)) at -628 ppm. To the best of our knowledge, [(C(4)H(9))(4)N](3)(V(3)O(9)) presents the first case in which every possible ion paired state can be observed directly from a parent polyion. Isolation and characterization of this simple metal oxo moiety may now facilitate efforts to design functional polyoxometalates.