首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 828 毫秒
1.
近年发展起来的制备功能薄膜的电化学沉积技术,是软溶液工艺路线(Soft Solution Processing简记为SSP)中的重要技术[1]。与传统的薄膜制备技术相比,电化学沉积技术在反应控制、形貌控制、沉积速度、能量消耗、环境影响、薄膜晶化以及沉积设备等方面都有较明显的优势,同时避免了  相似文献   

2.
以金属Ti和V作为靶材,采用直流反应共溅射技术在室温下制备了以{211}晶面为主的锐钛矿相Ti1-xVxO2薄膜,研究了不同V靶功率对Ti1-xVxO2薄膜的薄膜成分、晶相结构和可见光催化性能的影响。研究表明,Ti1-xVxO2薄膜的晶相结构为锐钛矿相,择优取向为(211),而结晶度受V靶功率的影响。随着V靶功率的增加,薄膜中V元素含量逐渐增加,同时,晶粒和沉积速率也逐渐增加。另外,当V靶功率为150 W时,薄膜的表面粗糙度值有一个最大值。V的掺杂导致薄膜的能带间隙变窄,对光的吸收向可见光区偏移,从而有效地改善了薄膜的可见光催化能力。当V靶功率为150 W时,Ti1-xVxO2薄膜的能带间隙值为 2.82 eV,其在2 h的可见光照射下分解了80%的RhB染料。这被归结于能带间隙窄,高能晶面{211}和结晶度高的共同作用。  相似文献   

3.
谢鹏程  黄洁 《无机化学学报》2015,31(11):2197-2204
以金属Ti和V作为靶材,采用直流反应共溅射技术在室温下制备了以{211}晶面为主的锐钛矿相Ti1-xVxO2薄膜,研究了不同V靶功率对Ti1-xVxO2薄膜的薄膜成分、晶相结构和可见光催化性能的影响。研究表明,Ti1-xVxO2薄膜的晶相结构为锐钛矿相,择优取向为(211),而结晶度受V靶功率的影响。随着V靶功率的增加,薄膜中V元素含量逐渐增加,同时,晶粒和沉积速率也逐渐增加。另外,当V靶功率为150W时,薄膜的表面粗糙度值有一个最大值。V的掺杂导致薄膜的能带间隙变窄,对光的吸收向可见光区偏移,从而有效地改善了薄膜的可见光催化能力。当V靶功率为150W时,Ti1-xVxO2薄膜的能带间隙值为2.82eV,其在2h的可见光照射下分解了80%的RhB染料。这被归结于能带间隙窄,高能晶面{211}和结晶度高的共同作用。  相似文献   

4.
The development of novel superhard nanocomposite, nano-layered coatings and of the coating technology based on vacuum arc evaporation from rotating electrodes is summarized. The nc-Al1-xTixN/a-Si3N4 coatings in which the nanocrystals of the Al-rich solid solution with the fcc crystal structure of TiN are imbedded into a thin matrix of amorphous silicon nitride show high thermal stability, oxidation resistance and excellent performance in dry, fast machining that is superior to the state-of-the-art (Ti1-xAlx)N coatings.  相似文献   

5.
本文采用溶胶凝胶法制备了一系列不同Ca含量的钙钛矿型氧化物La1-xCaxMnO3(x=0~0.4)纳米颗粒, X射线粉末衍射及精修、扫描电镜表征显示其相纯度和结晶度高, 颗粒平均粒径约40 nm。在0.1 mol·L-1 KOH水溶液中进行的氧还原电催化性能测试显示, La0.7Ca0.3MnO3样品催化活性最高, 表观电子转移数接近4, 还原电流密度与Pt/C催化剂相当, 而催化稳定性优于Pt/C。进一步研究了La1-xCaxMnO3样品中Mn价态、晶胞参数的改变对氧还原催化活性的影响, 结果表明当x=0.3时, 催化剂中Mn处于混合价态, Mn-O键长适中, 最有利于电催化反应。  相似文献   

6.
本文采用溶胶凝胶法制备了一系列不同Ca含量的钙钛矿型氧化物La1-xCaxMnO3(x=0~0.4)纳米颗粒,X射线粉末衍射及精修、扫描电镜表征显示其相纯度和结晶度高,颗粒平均粒径约40 nm。在0.1 mol.L-1KOH水溶液中进行的氧还原电催化性能测试显示,La0.7Ca0.3MnO3样品催化活性最高,表观电子转移数接近4,还原电流密度与Pt/C催化剂相当,而催化稳定性优于Pt/C。进一步研究了La1-xCaxMnO3样品中Mn价态、晶胞参数的改变对氧还原催化活性的影响,结果表明当x=0.3时,催化剂中Mn处于混合价态,Mn-O键长适中,最有利于电催化反应。  相似文献   

7.
Porous CaF2 anti-reflective coating films were prepared by the sol-gel method. Effects of organic additives on deposition and optical properties of the films were investigated. Amino alcohols (2-aminoethanol, 2-dimethylaminoethanol, and triethanolamine) and alcohols with larger molecular weights (ethyleneglycol, 2-methoxyethanol, cyclohexanol, and 2-(2-n-butoxyethoxy)ethanol) were chosen as the organic additives. Among these additives, cyclohexanol was the most effective to control the surface morphology and the optical properties of the films. By changing the amount of cyclohexanol in the coating solution, it was possible to control the optical thickness of the CaF2 films. Accordingly, the wavelength giving the maximum transmittance could be changed in the UV region.  相似文献   

8.
Large area coatings (>10cm2) of the high temperature superconductor YBa2Cu3O7–x (x = 0.1 – 0.2) (YBCO) have been prepared by scale up an electrophoretic deposition technique using silver sheets and Si-wafers coated with Ag or Au as substrates. Several parameters, like the kind of the solvent, the applied voltage, the distance between the electrodes, the initial concentration of the suspension and the temperature during the electrophoresis were investigated in order to attain high deposition rates, as well as uniform YBCO coatings with the proper stoichiometry. To obtain a strongly adherent and dense coating a subsequent appropriate sintering and annealing procedure has been developed. The coatings obtained were characterized for their stoichiometry and superconducting properties by X-ray diffraction (XRD), Raman spectroscopy and magnetic measurements. The homogeneity and thickness of the films and the average grain size of the deposited particles have been investigated by optical and scanning electron microscopy (SEM).  相似文献   

9.
利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。  相似文献   

10.
本文采用溶胶-凝胶法制备了LaFe1-xNixO3(x=0,0.2,0.4,0.6,0.8,1.0)纳米晶粉末,利用XRD、TEM和电化学测试方法对LaFe1-xNixO3材料的相结构、形貌、成分组成和其在碱液中的充放电性能以及电化学动力学性能等方面进行了表征和分析,同时对电极受紫外光激发前后的电化学行为进行了对比研究。XRD和TEM分析表明,用硝酸盐作为原材料和溶胶-凝胶方法可制备出单一相结构的纳米晶钙钛矿型LaFe1-xNixO3复合氧化物,随Ni替代量x的增大,LaFe1-xNixO3的相结构由正交结构向菱面体结构转变,其分子体积和晶粒尺寸呈现减小的趋势。电化学研究结果表明,紫外光激发前,LaFe1-xNixO3电极的放电容量随x的增加而逐渐增大;光激发后,电极的放电容量和交换电流Io与未激发前相比显著提高,当x=0.4时其放电容量具有最大值483.1mAh·g-1,Io值由光激发前的3.54~11.58 mA·g-1大幅增加至激发后的8.37~40.11 mA·g-1。  相似文献   

11.
Homogeneous crack-free lead zirconate titanate (Pb(Zr0.45Ti0.55)O3: PZT 45/55) films were prepared by a chemically modified sol-gel process using lead acetate trihydrate, zirconium n-propoxide, and titanium isopropoxide precursors. The coating solutions were modified by the addition of diethanolamine. Single and multilayer films were deposited with a 2000 rpm spin rate on fused silica and MgO(100) substrates. Multiple spin coating with an intermediate heat treatment in air at 400°C for 3 min between coatings was performed to obtain films up to 2 m in thickness. The formation of the tetragonal perovskite structure was found to depend on the intermediate firing temperature, final annealing temperature, and annealing time. A 650°C rapid thermal annealing treatment in oxygen was required to crystallize the PZT film into the perovskite structure. The films were characterized using optical spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and thermo-gravimetry and differential scanning calorimetry (TG-DSC). The optical constants of the PZT films were evaluated from spectral transmittance and reflectance measurements. Optical constants are presented over the visible and near infrared region.  相似文献   

12.
Qiang Li  Min Gu 《中国化学快报》2011,22(11):1359-1362
TeOx-SiO2 composite films having third-order nonlinearities were prepared by electrochemically induced sol-gel deposition method on ITO substrate.The third-order optical nonlinearities of the films were measured by Z-scan technique.The third-order nonlinear susceptibilities(χ(3)) of the as-prepared films are 5.9×10-7 to 4.29×10-6esu.The surface morphology and composition of the films were characterized by SEM/EDX,which identified that Te metallic particles well dispersed in TeOx-SiO2 gel films.  相似文献   

13.
以醋酸锰、氢氧化锂和三氧化二铟为原料,以柠檬酸为配位剂,采用溶胶-凝胶法制备了掺杂In的尖晶石LiMn2-xInxO4(x=0,0.01,0.02,0.05),采用XRD、SEM对目标材料进行了结构和形貌表征,采用恒流充放电、循环伏安(CV)以及交流阻抗(EIS)谱测试对材料进行了电化学性能表征,考察了不同In掺杂量对材料性能的影响。结果表明,当In掺杂量为1%时,LiMn1.99In0.01O4样品具有纯的尖晶石锰酸锂结构,在0.5C和3.4~4.35 V电压范围条件下,LiMn1.99In0.01O4的初始放电容量为119.9 mAh.g-1,经过1C 30次,2C 30次,再0.5C 5次循环后,其放电容量保持率为84.9%,显示了良好的电化学性能。掺杂1%的In的样品比未掺杂的样品具有更优的高温循环稳定性能。  相似文献   

14.
采用高温固相法在空气中合成了Ba1.97-yZn1-xMgxSi2O7∶0.03Eu,y Ce3+系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba1.97-yZn1-xMgxSi2O7∶0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu2+离子的4f 65d1-4f 7跃迁,590~725 nm红光区窄带谱源于Eu3+的5D0-7FJ(J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu3+在Ba1.97-yZn1-xMgxSi2O7基质中被还原成了Eu2+;当x=0.1时,荧光粉Ba1.97Zn0.9Mg0.1Si2O7∶0.03Eu的绿色发光最强,表明Eu3+被还原成Eu2+离子的程度最大。当共掺入Ce3+离子后,形成Ba1.97-yZn0.9Mg0.1Si2O7∶0.03Eu,y Ce3+荧光粉体系,其发光随着Ce3+离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba1.96Zn0.9Mg0.1Si2O7∶0.03Eu,0.01Ce3+的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba2Zn0.9Mg0.1Si2O7基质中的能量传递与发光机理。  相似文献   

15.
采用高温固相法在空气中合成了Ba1.97-yZn1-xMgxSi2O7:0.03Eu,yCe3+系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba1.97-yZn1-xMgxSi2O7:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu2+离子的4f65d1-4f7跃迁,590~725 nm红光区窄带谱源于Eu3+5D0-7FJ (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu3+在Ba1.97-yZn1-xMgxSi2O7基质中被还原成了Eu2+;当x=0.1时,荧光粉Ba1.97Zn0.9Mg0.1Si2O7:0.03Eu的绿色发光最强,表明Eu3+被还原成Eu2+离子的程度最大。当共掺入Ce3+离子后,形成Ba1.97-yZn0.9Mg0.1Si2O7:0.03Eu,yCe3+荧光粉体系,其发光随着Ce3+离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba1.96Zn0.9Mg0.1Si2O7:0.01Ce3+,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba2Zn0.9Mg0.1Si2O7基质中的能量传递与发光机理。  相似文献   

16.
We have investigated the synthesis of perovskite-type SrFeOx (2.5 x 3.0) using three preparative methods: sol-gel, mechanochemical processing and solid state reactions at high temperature of the corresponding oxides. The sample obtained after calcination of the gel from sol-gel method, contained the least amount of strontium carbonate impurity. The amount of strontium carbonate impurity decreased with the increase in calcination temperature. Perovskites obtained have been characterized by X-ray diffraction (XRD) and nitrogen adsorption isotherms. Samples obtained from three methods have been compared with respect to calcination temperature, crystallite size and specific surface area.Issued as NRCC No. 46479.  相似文献   

17.
针对荧光分子检测普遍灵敏度低和检测范围窄的问题,制备了具有等离子激元共振特性的重掺杂半导体纳米结构Cu2-xS和典型的稀土掺杂上转换发光纳米颗粒NaYF4:Yb,Er,通过三相界面自组装方法获得了Cu2-xS/NaYF4:Yb,Er薄膜基底。结合有限元模拟,计算了不同摆放情况下Cu2-xS周围的局域电场分布,研究了在实际薄膜中Cu2-xS纳米盘之间产生的等离激元耦合对上转换发光性能以及对拉曼信号增强的影响。结果表明,Cu2-xS等离激元层与NaYF4:Yb,Er发光层的耦合,不仅得到了上转换3个数量级的提高,还实现了分子检测10-7 mol·L-1的检测极限,并且获得了10-3~10-7 mol·L-1的宽线性响应,从而达到高灵敏度的定性和定量双功能的精确检测。  相似文献   

18.
In this study, we prepared Sr x Ba1 – x Nb2O6 (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO3 (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)5 as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO3 (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO3 were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr x Ba1 – x Nb2O6 and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr x Ba1 – x Nb2O6 thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr x Ba1 – x Nb2O6 (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO3 (110) single crystal substrate.  相似文献   

19.
Thin films of MoS x have been prepared on silicon substrates by spin coating and thermolysis of 0.5 M solutions of alkyldiammonium tetrathiomolybdates in 1,2-ethanediamine (EDA) and 1,2-propanediamine (12PDA). The films have been heat treated in air at temperatures between 80 and 250°C and under N2 atmosphere at temperatures between 300 and 800°C. X-ray diffraction shows a restricted crystallisation and amorphous residues in both kind of films. EDA-based films exhibit a high tendency to crystallise whereas 12PDA-based films form associated structures with the solvent preventing precursor crystallisation. An insight into the processes occurring in film formation is gained by infrared spectroscopy which indicates a beginning of the decomposition of the 12PDA-based film at temperatures as low as 80°C with incorporation of the diamine solvent. In contrast, the EDA-based films show first signs of a decomposition at 150°C. The decomposition of the intermediate MoS3 in both cases starts between 250 and 300°C. By means of SNMS depth profiles carbon contents up to 21 and 32 atom-% were found in EDA- and 12PDA-based films, respectively. The films show a significant deficit of sulphur which is compensated by the carbon. Near the surface of the coatings a loss of carbon is observed.  相似文献   

20.
荧光材料基质的结构调制对于调控发光材料的发光性能,探索固体结构-性能关系具有重要的研究意义。本文以Y2SiO5基质为模型,分别利用Si/Al和Si/P取代,以[AlO4]和[PO4]四面体替换[SiO4]四面体,设计合成了一系列组成为Y1.95Si1-xAlxO5-xFx∶0.05Ce3+(x=0.05,x=0.1,x=0.2,x=0.4,x=1)和Y1.95-yCaySi1-yPyO5∶0.05Ce3+(y=0,y=0.02,y=0.04,y=0.06,y=0.08,y=0.2)的荧光材料。结合X射线衍射、荧光光谱、荧光寿命等测试手段对其进行了表征分析。结果表明,在x≤0.2,y≤0.04时得到的产物能够保持Y2SiO5的结构特征,在一定的基质组成替换范围内,设计合成的样品Y1.95Si1-xAlxO5-xFx∶0.05Ce3+、Y1.95-yCaySi1-yPyO5∶0.05Ce3+能提高发光强度,发射光谱呈现蓝移现象。荧光寿命测试表明这两个系列的化合物中Ce3+所处的基质环境变化较小,Ce3+发光也未产生较大的变化。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号