Crystal Structure of Ethoxyethyl 3-(2-Chloro-5-pyridyl methylamino)-2-cyano-4-methylpent-2-enoate

1 INTRODUCTION The nature and topography of the herbicide binding site in the reaction center of photosystem Ⅱ (PSⅡ) have been the subject of intense interest for many years. Among several commercially important herbicides with different structures such as atrazine and polypeptide of the PSII reaction center[1], the cyanoacrylates with general structure 1 have proved hightly potent and useful as probes[2, 3] of the receptor because their activities as inhibitors of photosynthetic ele…     

Incompatibility of acid-labile 2′ and 5′ protecting groups for solid-phase synthesis of oligoribonucleotides

Cleavage of 2−O-tetrahydropyranyl groups from ribonucleoside derivatives used in solid-phase oligoribonucleotide synthesis takes place to an unacceptable extent during treatment with protic acid to remove 5′-O-pixyl groups.     

Chemo-enzymatic synthesis of (S)-α-cyano-3-phenoxybenzyl alcohol

A chemo-enzymatic process for the preparation of (S)-α-cyano-3-phenoxybenzyl alcohol (S-CPBA), an important intermediate in the synthesis of many pyrethroids, was developed. The process consists of four stages, including lipase-mediated resolution. The first stage, the synthesis of racemic α-cyano-3-phenoxybenzyl acetate (CPBAc) from m-phenoxybenzaldehyde (m-PBA) and sodium cyanide in the presence of a phase transfer catalyst, resulted in a 75% yield with 95% purity. The second key step is the resolution of the racemic ester by a highly enantioselective lipase from Pseudomonas sp. The immobilized enzyme carried out the transesterification reaction to nearly full conversion (46% out of 50%) with an enantiomeric excess of >96%. The enzymatic reaction was accomplished in a batch system as well as in a fluidized bed column. The reaction was found to be inhibited by accumulation of the product and to a lesser extent, by the aldehyde. The separation of the enantiomerically pure alcohol from the undesired ester was performed by chromatographic techniques, as well as by extraction with hexane. The final racemization step of the (R)-ester was easily attained with the use of triethylamine in diisopropyl ether or toluene. The process was shown to be feasible on a gram scale and shows potential for scale up.     

2-Polyfluoroalkylchromones. 11. Synthesis and structures of 5-hydroxy-3-(2-hydroxyaryl)-5-polyfluoroalkyl-Δ2-pyrazolines and 3(5)-(2-hydroxyaryl)-5(3)-polyfluoroalkylpyrazoles

The reaction of 2-hydroxy-2-polyfluoroalkylchroman-4-ones with hydrazine affords 5-hydroxy-3-(2-hydroxyaryl)-5-polyfluoroalkyl-²-pyrazolines, whereas 2-polyfluoroalkylchromones under similar conditions produce 3(5)-(2-hydroxyaryl)-5(3)-polyfluoroalkylpyrazoles. 5-(2-Hydroxyaryl)-1-methyl-3-polyfluoroalkylpyrazoles were synthesized in the reaction with methylhydrazine, and the reaction with phenylhydrazine afforded regioisomeric 3(5)-(2-hydroxyphenyl)-1-phenyl-5(3)-polyfluoroalkylpyrazoles.     

Synthesis of 2-(3-cyano-5-hydroxy-5-methyl-4-vinylene-1H-pyrrol-2(5H)-ylidene)malononitriles – novel functionalized analogs of tricyanofuran-containing (TCF) push–pull chromophores

2-(3-Cyano-5-hydroxy-4,5-dimethyl-1H-pyrrol-2(5H)-ylidene)malononitrile was synthesized by the interaction between malononitrile dimer and diacetyl. It reacts with aldehydes in ethanol in the presence of ammonium acetate at room temperature and results 2-(3-cyano-5-hydroxy-5-methyl-4-vinylene-1H-pyrrol-2(5H)-ylidene)malononitriles in 66–86% yield. The developed method is of interest as a promising approach to a novel group of push–pull chromophores, which are functionalized analogs of widely used chromophores of the tricyanofuran (TCF) series.GRAPHICAL ABSTRACT     

Crystal Structure of Methyl 3- (2-chlorophenyl )-3- (5, 5-dimethyl-3-hydroxy-2-cyclohexene- 1-one-2-yl) propionate

1INTRODUCTIONInorganicsolidsupportsascatalystshavebeenwellstudied,becauseoftheirap-plicationsinorganicsynthese('~".Recently,wehavereportedtheKnoevenagelcon-densationcatalysedbyKF-Al,O,['i.Inthispaper,wediscussedthecrystalstruc-tureofthetitlecomPoundsynthesizedbythereactionof2-chlorobenzaldehydey5,5-dimethyl-1,3-cyclohexanedioneandisopropylidenemalonateinmethanolcatalyzedbyKF-Alzo,'Inordertoconfirmthestructureofthetitlecompound,theX-raycrys-tallOgraphicstudywascarriedout.2EXPER1MEN…     

The mechanism of fluxionality of (1,2,7-η3-2-Me-benzyl)(η5-C5H5)Mo(CO)2

It is shown that (1,2,7-η³-2-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits in solution as one isomer which is fluxional, probably via (7-η¹-2-Me-benzyl)((η⁵-C₅H₅)Mo(CO)₂, with ΔG^≠₃₇₀ = 23.6 ± 1.0 kcal mol⁻¹. In contrast, (1,2,7-η³-3-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits as two isomers at −20°C, which undergo interconversion at room temperature with ΔG^≠ 15.7 kcal mol⁻¹. This dynamic process is an allyl rotation. It is probable that there is also a low energy [1,5]-sigmatropic shift.     

Synthesis and characterization of α-{3-[2-hydroxy-3-(N-methyl-N-hydroxy-ethylamino)propoxy]propyl}-ω-butylpolydimethylsiloxanes.

α-{3-[2-hydroxy-3-(N-methyl-N-hydroxyethylamino)propoxy]propyl}-ω-butylpolydimethylsiloxanes Ⅲ with various moleculax weights were prepared by epoxy addition of α-[3-(2,3-epoxy-propoxy)propyl]-ω-butylpolydimethylsiloxanes Ⅱ and Nmethylmonoethanolamine.At each step.the outcome compounds were characterized through FT-IR and NMR spectra,the results showed that each step was successfully carried out and objective products were achieved.     

Cyclization of 1-(4,4-diethoxybutyl)-3-aryl(thio)ureas to 2-arylpyrrolidines and 2,3´-bipyrrole derivatives

A reaction of 1-(4,4-diethoxybutyl)-3-phenylthiourea with resorcinol, 2-methylresorcinol, pyrogallol, and hydroquinone in chloroform in the presence of trifluoroacetic acid leads to 2-aryl-1-(N-phenylcarbamothioyl)pyrrolidines. 1-(4,4-Diethoxybutyl)-3-arylureas and 1-(4,4diethoxybutyl)-3-arylthioureas in the presence of an acid catalyst undergo intramolecular cyclization and dimerization with the formation of 1,1´-bis(N-arylcarbamo(thio)yl)-2,3´-bipyrrole derivatives.     

Formation of the phase structure of polymer systems of ethylene copolymers–[3-(2-aminoethylamino)propyl]trimethoxysilane

Solubility of components is investigated in a wide range of temperatures and formulations in systems of ethylene copolymers–[3-(2-aminoethylamino)propyl]trimethoxysilane. Phase diagrams are constructed. Temperature and concentration ranges of variation of solubility are revealed, and the structure of modified copolymers is studied.     

Synthesis of 1,1´-[methylenebis(oxy)]bis[3-alkyl-3-(2-haloethyl)triaz-1-ene 2-oxides]

A method for the synthesis of promising nitric oxide donors in living organisms, 1,1´-[methylenebis(oxy)]bis[3-alkyl-3-(2-haloethyl)triaz-1-ene 2-oxides] was elaborated. The method involved replacement of hydroxy groups of the corresponding 1,1´-[methylenebis(oxy)]bis[3-alkyl-3-(2-hydroxyethyl)triaz-1-ene 2-oxides] by halogen atoms and, in some cases, the exchange of one halogen atom for another.     

Crystal Structure and Spectra Characters of 2-Benzoly-3-(4-(1,2,4-triazole)-5-anilino-thiophene and 2-(4-Methyl-benzoly)-3-(4- chlrolphenyl)-3-(1,2,4-triazole)-5-anilino-thiophene

Triazole derivatives are widely studied, because they represent the largest group of modern fungicides and are widely used both in human and veterinary therapy and in agriculture. We synthesized the title compound in which the thiophene ring was substituted by a 1,2,4-triazole group, a phenacyl group, a phenylaminol group and a benzene ring.     

Synthesis of propyl O-(α-L-rhamnopyranosyl)-(1→3)-[2,4-di-O-(2s-methylbutyryl)-α-L-rhamno-pyranosyl]-(1→2)-(3-O-acetyl-β-D-glucopyranosyl)-(1→2)-β-D-fucopyranoside,the tetrasaccharide moiety of Tricolorin A

Propyl O-(α-L-rhamncpyranosyl)-(1→3)-[2,4-di-O-(2s-methylbutyryl)-α-L-rham-nopyranosyl]-(1→2)-(3-O-acetyl-β-D-glucopyranosyl)-(1→2)-β-D-fucopyranoside (1), the tetrasac-charide moiety of Tricolorin A, was synthesized in total 23 steps with a longest linear sequence of 10 steps, and overall yield of 3.7% from D-Glucose. The isomerization of the dioxolane-type berzyli-dene in the presence of NIS/AgOTf was observed. Tetrasaccharide 1 exhibited no activity against the cultured P388 cell as Tricolorin A did.     

Evaluation of molecularly imprinted polymers using 2′,3′,5′-tri-O-acyluridines as templates for pyrimidine nucleoside recognition

In this paper, we describe the synthesis and evaluation of molecularly imprinted polymers (MIPs), prepared using 2′,3′,5′-tri-O-acyluridines as ‘dummy’ templates, for the selective recognition of uridine nucleosides. The MIPs were synthesised using a non-covalent approach with 2,6-bis-acrylamidopyridine (BAAPy) acting as the binding monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent. The MIPs were evaluated in terms of capacity, selectivity and specificity by analytical and frontal liquid chromatography measurements. The results obtained in organic mobile phases suggest that the nucleosides are specifically bound to the polymer by the complementary hydrogen bonding motifs of the binding monomer and the nucleoside bases. The MIPs exhibited relatively high imprinting factors for 2′,3′,5′-tri-O-acyluridines, while they did not show any binding capacity for other nucleosides lacking the imide moiety on their base. Moreover, the presence of ester-COO groups in the EGDMA cross-linker may lead to the formation of additional hydrogen bonds with the 2′,3′ and/or 5′-OH of sugar part, allowing enhancement of the recognition of the uridine nucleosides. In aqueous media, results show that the binding is driven by hydrophobic interactions.     

Microwave promoted one-pot synthesis of 3-(2′-amino-3′-cyano-4′-arylpyrid-6′-yl)coumarins

A facile procedure for the synthesis of 3-(2′-amino-3′-cyano-4′-arylpyrid-6′-yl)coumarins are being reported starting from 3- acetylcoumarin,aromatic aldehydes and malononitrile.The reactions were carded out on microwave irradiation in good yield with short time and easy work-up.The structures of all the compounds have been confirmed on the basis of their analytical,IR,~1H NMR, and mass spectral data.     

Reactions of Trimethylsilyl Cyanide with α-Keto Esters: Selective Preparation of Either Methyl 4-(Trimethyl-silyl) oxy-4-cyano-2-oxopentanoate or Methyl 2-(Trimethylsilyl) Oxy-2-cyano-4-oxopentanoate

The reaction of methy1 2,4-dioxopentanoate (3) with TMSCN in the presence of zinc iodide affords the TMS protected cyanohydrin enol ether 4, from which the TMS protected cyanohydrin 1 can be obtained. Treatment of 3 with TMSCN alone gives the isomeric cyanohydrin 2. Reactions of two other α-keto esters with TMSCN are shown to proceed without a catalyst.     

Studies on Acylthiosemicarbazides and Related Heterocycles(ⅪⅤ)——Synthesis and Bactericidal Activity of 1-(5-(3-Pyridyl)-2H-Tetrazol-2-ylacetyl) -4-Arylthiosemicarbazides and 3- (5- (3-Pyridyl)-2H-Tetrazol-2-ylmethyl)-4-Aryl-1,2 ,4-Triazole-5-Thiones

Introduction In the preceding paper it was described that various 1-acyl-4-substituted thiosemicarbazides and their derivatives exhibited a broad spectrum of antibacterial activities. Kothari pointed out that some heterocycles linked with tetrazole and 1,2,4-triazole can be used as antiinflammatory agent. We have also demonstrated that both 3-(5-a- naphthyl)-2H-tetrazol-2-ylmethyl)-4-aryl-1,2,4-triazole-5-thiones and 3-(3-pyridyl)-     

Synthesis of 4-(4-Methylsulfonylphenyl)-3-phenyl-2(3H)-thiazole Thione Derivatives as New Potential COX-2 Inhibitors

Synthesis of novel 4-（4-methylsulfonylphenyl）-3-phenyl-2（3H）-thiazole thione derivatives with functionalized diarylheterocycle pharmacophore as potential COX-2 inhibitors was described. The title compounds were synthesized by cyclocondensation of corresponding dithiocarbamate and 2-bromo-1-（4-methylsulfonylphenyl）ethanone, followed by dehydration with H2SO4. All of the target compounds were characterized by ^1H NMR, IR and mass spectral data.