Spectrophotometric simultaneous determination of cobalt, copper and nickel using nitroso-R-salt in alloys by partial least squares

Partial least squares modeling as a powerful multivariate statistical tool applied to spectrophotometric simultaneous determination of cobalt, copper, and nickel in aqueous solutions. The concentration range for cobalt, copper and nickel were 0.4-2.6, 0.6-3.4, 0.5-5.5 ppm, respectively. The experimental calibration set was composed with 36 sample solutions using a mixture design for three component mixtures. The absorption spectra were recorded from 470 to 600 nm. The effect of pH on the sensitivity and selectivity was studied according to net analyte signal (NAS). The values of root mean square difference (RMSD) for cobalt, copper and nickel using partial least squares (PLS) were 0.0192, 0.0263 and 0.0446 ppm, respectively. The effects of various cations and anions were investigated. The method was used to determination of cobalt, copper and nickel in two sample alloys based on copper, nickel and cobalt (known as cunico) and based on cobalt, nickel and iron (known as conife).     

Solid-phase extraction and simultaneous spectrophotometric determination of trace amounts of Co, Ni and Cu using partial least squares regression

A novel sensitive and simple method for rapid extraction, preconcentration and determination of cobalt, nickel and copper as their 1-(2-pyridilazo)-2-naphthol (PAN) complexes using polytetrafluoroethylene filter as solid phase and multivariate calibration of spectrophotometric data is presented. The analytical wavelengths of 400-700 nm were chosen and the experimental calibration matrix for partial least squares (PLS) was designed with 21 samples of 5.90-41.25, 0.30-29.35 and 0.64-41.30 ng ml⁻¹ for cobalt, nickel and copper, respectively. The cross-validation method was used for selecting the number of components. The root-mean-square errors of predictions (RMSEPs) were between 0.48 and 1.37 ng ml⁻¹. In this work we could reach preconcentration factors of 100 or even higher by using polytetrafluoroethylene as solid phase which is cheap and can be used in a wide range of pH, flow rates and for many times. The proposed method was successfully applied to the simultaneous determination of Co, Ni and Cu in tap and pit water samples.     

Simultaneous determination of copper, zinc and lead by adsorptive stripping voltammetry in the presence of Morin

A sensitive and selective method for the simultaneous determination of copper, zinc and lead is presented. The method is based on the adsorptive accumulation of 2′,3,4′,5,7-pentahydroxyflavone (Morin) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. Optimal analytical conditions were found to be Morin concentration of 2.0 μM, pH of 4.0, and an adsorption potential at −500 mV versus Ag/AgCl. With an accumulation time of 60 s, the peak currents are proportional to the concentration of copper, lead and zinc over the 1 to 60, 0.3-80 and 1-70 ng ml⁻¹ range with detection limits of 0.06, 0.08 and 0.06 ng ml⁻¹, respectively. The procedure was applied to the simultaneous determination of copper, lead and zinc in some real and synthetic artificial real samples with satisfactory results.     

Structural and magnetic properties of metal complexes with pyridine-2,6-dicarboxylate and 5-(4-bromophenyl)-2,4′-bipyridine

A series of complexes has been synthesized based on pyridine-2,6-dicarboxylate (L1) as the bridging ligand and 5-(4-bromophenyl)-2,4′-bipyridine (L2) as the pendant with different metal ions such as Ni^II, Co^II, and Cu^II, under hydrothermal conditions. In nickel and cobalt complexes [M(L1)(L2)₂ · H₂O]_n (M = Ni²⁺ or Co²⁺), the metal ions are bridged by L1 to form 1D coordination zigzag polymeric chains with L2 pendants possessing hexa-coordinated distorted octahedral geometries. While the copper ions are penta-coordinated by L1 and L2 with distorted square pyramidal geometries forming the tetranuclear cluster with the formula [Cu₄(L1)₄(L2)₄] · 2H₂O. It has been found that both the structure and magnetic property of these complexes are metal ions dependent. Intramolecular antiferromagnetic interactions were observed in the nickel and cobalt 1D coordination polymers, while ferromagnetic coupling was found in the tetranuclear copper cluster. Density functional theory calculations suggested that the O–C–O bridges of L1 in a basal–apical mode are responsible for intracluster intermetallic ferromagnetic exchange for the tetranuclear copper cluster.     

Coprecipitation with yttrium phosphate as a separation technique for iron(III), lead, and bismuth from cobalt, nickel, and copper matrices

The coprecipitation behavior of 44 elements (47 ions because of chromium(III,VI), arsenic(III,V), and antimony(III,V)) with yttrium phosphate was investigated at various pHs. Yttrium phosphate could quantitatively coprecipitate iron(III), lead, bismuth, and indium over a wide pH range; however, 18 ions, including alkali metals and oxo anions, such as vanadium(V), chromium(VI), molybdenum(VI), tungsten(VI), germanium(IV), arsenic(III,V), selenium(IV), and tellurium(VI), were scarcely collected. In addition, 19 ions, including cobalt, nickel, and copper(II), were hardly coprecipitated at pHs below about 3. Based on these results, the separation of iron(III), lead, and bismuth from cobalt, nickel, and copper(II) matrices was investigated. Iron(III), lead, and bismuth ranging from 0.5 to 25 μg could be separated effectively from a solution containing 0.5 g of cobalt, nickel, or copper at pH 3.0. The separated iron(III), lead, and bismuth could be determined by inductively coupled plasma atomic emission spectrometry using internal standardization. The detection limits (3σ, n = 7) of iron(III), lead, and bismuth were 0.008, 0.137, and 0.073 μg, respectively. The proposed method was applied to the analyses of metals and chlorides of cobalt, nickel, and copper.     

An approach by using near-infrared diffuse reflectance spectroscopy and resin adsorption for the determination of copper, cobalt and nickel ions in dilute solution

Near-infrared spectroscopy (NIRS) has been proved to be a powerful analytical tool and used in various fields, it is seldom, however, used in the analysis of metal ions in solutions. A method for quantitative determination of metal ions in solution is developed by using resin adsorption and near-infrared diffuse reflectance spectroscopy (NIRDRS). The method makes use of the resin adsorption for gathering the analytes from a dilute solution, and then NIRDRS of the adsorbate is measured. Because both the information of the metal ions and their interaction with the functional group of resin can be reflected in the spectrum, quantitative determination is achieved by using multivariate calibration technique. Taking copper (Cu²⁺), cobalt (Co²⁺) and nickel (Ni²⁺) as the analyzing targets and D401 resin as the adsorbent, partial least squares (PLS) model is built from the NIRDRS of the adsorbates. The results show that the concentrations that can be quantitatively detected are as low as 1.00, 1.98 and 1.00 mg L⁻¹ for Cu²⁺, Co²⁺ and Ni²⁺, respectively, and the coexistent ions do not influence the determination.     

Antibacterial and antifungal activity of metal(II) complexes of acylhydrazones of 3-isatin and 3-(N-methyl)isatin

Cobalt(II), nickel(II), copper(II) and zinc(II) complexes of 2-thiophenecarbonyl hydrazone of 3-isatin (H₂L¹) and 2-furoic hydrazones of 3-isatin (H₂L²) and 3-(N-methyl)isatin (HL³), with general composition [M(L)₂] · nX, where X is ethanol or/and water, were synthesised and characterised. The molecular structure of HL³ showed that it crystallised in the keto form, which is also the more abundant tautomer for the three hydrazone ligands in solution. The three ligands behave as κ²-O,N donors in the cobalt(II) and zinc(II) complexes. The X-ray crystal structure of pseudotetrahedral [Zn(HL¹)₂] · 1.75MeOH confirmed the O,N coordination mode of the two monodeprotonated ligands in their keto forms. Secondary interactions of zinc ions with the O atoms of each isatin keto residue provoke a substantial distortion towards a square pyramidal form. The interaction of the isatin keto residues is stronger in the three nickel(II) complexes where the three acylhydrazones can be considered as κ³-O,N,O donors.     

2,2′,3,4-Tetrahydroxy-3′-sulpho-5′-nitroazobenzene for spectrophotometric determination of aluminium in pharmaceutical suspensions and granite

A selective and sensitive new spectrophotometric method has been developed for the determination of aluminium. 2,2′,3,4-Tetrahydroxy-3′-sulpho-5′-nitroazobenzene (tetrahydroxyazon SN) formed an orange chelate with aluminium at pH 4. Molar absorptivity of the complex in 1:2 is 5.46 × 10⁴ l mol⁻¹ cm⁻¹ at 479 nm. The method obeys Beer's law in the range of 0.005-1.079 μg ml⁻¹. The determination of aluminium is not interfered with by earth alkaline, alkaline elements, rare earth elements, halides, phosphates, sulphates, urea, ascorbic acid, Sn²⁺, Sr²⁺, Cr³⁺, Cd²⁺, Hg²⁺, or Mn²⁺. The proposed method is rapid and simple, and it has been successfully applied to the determination of aluminium in certified pharmaceutical suspension and granite.     

Photofunctional supramolecular solution systems of chiral Schiff base nickel(II), copper(II), and zinc(II) complexes and photochromic azobenzenes

Preparations, crystal structures, electronic and CD spectra are reported for new chiral Schiff base complexes, bis(N-R-1-naphthylethyl-3,5-dichlorosalicydenaminato)nickel(II), copper(II), and zinc(II). Nickel(II) and copper(II) complexes adopt a square planar trans-[MN₂O₂] coordination geometry with Δ(R,R) configuration. While zinc(II) complex adopts a compressed tetrahedral trans-[MN₂O₂] one with Δ(R,R) configuration and exhibits an emission band around 21 000 cm⁻¹ (λ_ex = 27 000 cm⁻¹). Absorption and CD spectra were recorded in N,N′-dimethylformamide, acetone, methanol, chloroform, and toluene solutions to discuss relationships between spectral shifts of d–d and π–π^∗ bands by structural changes of the complexes and physical properties of the solvents. Moreover, we have attempted to investigate conformational changes of the complexes induced by photoisomerization of azobenzene, 4-hydroxyazobenzene, or 4-aminoazobenzene, in various solutions under different conditions. Weak intermolecular interactions between complexes and azobenzenes are important for the phenomenon by conformational changes of bulky π-conjugated moieties of the ligands.     

beta-Correction as a preprocessing method for partial least squares in simultaneous determination of zinc and lead

An error analysis of predicted values using spectral correction matrix and partial least squares (PLS) modeling is applied for the determination of Zn²⁺ and Pb²⁺ with methylthymol blue (MTB) as a metallochromic indicator. The concentration ranges for Pb²⁺ and Zn²⁺ in standard solution sets are 0.5-5.2 and 0.1-2.5 μg ml⁻¹, respectively. The experimental calibration set was composed of 20 sample solutions using a random design for two component mixtures. The absorption spectra were recorded from 400 to 700 nm. The two wavelengths, which exert the minimum error in prediction of two metal ion concentrations, are chosen according to an error analysis of different pairs of wavelengths. The effect of the pH on the sensitivity in determination of Zn²⁺ and Pb²⁺ using MTB was studied in order to choose the optimum pH (pH=6) for determination. The values of root mean square difference (RMSD) for lead and zinc using β-correction partial least squares were 0.0977 and 0.1266, respectively. The effect of diverse ions and several experimental parameters were studied. The method was used for the determination of lead and zinc in alloy samples.     

New insights into the metal ion–peptide hydroxamate interactions: Metal complexes of primary hydroxamic acid derivatives of common dipeptides in aqueous solution

Complex formation of primary dipeptide hydroxamic acids, L-Ala-L-AlaNHOH and L-Ala-L-SerNHOH, as well as the corresponding Z-protected ones, Z-L-Ala-L-AlaNHOH and Z-L-Ala-L-SerNHOH (Z = benzyloxycarbonyl), with iron(III), aluminium(III), nickel(II), copper(II) and zinc(II) was studied in aqueous solution by pH-potentiometric and spectroscopic (UV–Vis, EPR, CD, ¹H NMR) methods. The exclusive formation of [O,O] chelated hydroxamate complexes was found with iron(III) and aluminium(III) with all the ligands. Formation of linkage isomers with the involvement of either [O,O] hydroxamate or [NH₂,CO] chelates was detected both in the zinc(II)-L-Ala-L-AlaNHOH and -L-Ala-L-SerNHOH systems. Upon increasing the pH, none of these chelating sets are capable of preventing the hydrolysis of the metal ion. The formation of stable complexes was found in the nickel(II) and copper(II) systems above pH ∼ 6 with a [NH₂, N_amide, N_hydrox.] binding mode after deprotonation and coordination of the peptide amide and the hydroxamate group. With an excess of copper(II), the formation of trinuclear [Cu₃H_xL₂]^x+4 type (x = −4 to −6) complexes as the major species was also detected. Blocking the terminal amino group in the Z-protected ligands results in a dramatic decrease of the nickel(II) and zinc(II) binding strengths, and insoluble complexes with copper(II). No indication was found for the role of the hydroxyl group of the serine moiety in metal ion binding.     

Fluoride determination in some mouth wash preparations by a novel La(III) graphite coated membrane sensor based on amitraz

Solution studies on the binding properties of N-2,4-dimethylphenyl-N′-ethylformamidine (amitraz) toward nine lanthanide ions including lanthanum, cerium, neodium, samarium, europium, gadolinium, terbium, dysprosium, ytterbium and some other transition and heavy metal ions such as copper, lead, cobalt, nickel ions, showed a selective 1:1 complexation between amitraz and lanthanum ions. Consequently, amitraz was applied as an ion carrier in construction of a novel poly(vinyl chloride) membrane sensor for La(III). The sensor has a linear dynamic range of 1.0 × 10⁻¹ to 1.0 × 10⁻⁷ M with a Nernstian slope of 19.8 ± 0.2 mV per decade and a detection limit of 8.0 × 10⁻⁸ M. The proposed sensor displays a fast response time (<8 s), and can be used for at least 2 months without any considerable divergences in the potentials. The La(III) membrane sensor revealed comparatively good selectivity with respect to most of cations including alkaline, alkaline earth, and some transition and heavy metal ions. It could be used in a pH range of 3.0-9.0. The proposed membrane electrode was used as an indicator electrode in the potentiometric titration of La(III) ions with an EDTA solution, and also in the determination of fluoride concentration in some mouth wash preparations.     

Factorial design for optimization of experimental variables in preconcentration of copper by a chromotropic acid loaded Q-Sepharose adsorbent

An agarose-based anion exchanger (Q-Sepharose) was loaded with chromotropic acid (CTA) and used for column preconcentration and determination of copper by flame AAS. Preliminary experiments indicated that a sample pH of 5.7-6.5 is best suited for accumulation of copper and a 2.5 ml portion of a 0.02 mol l⁻¹ HCl solution can efficiently desorb the analyte from the column. An incomplete factorial design was used for optimization of five different variables that affect recovery of copper. The results indicated that ionic strength, pH and sample volume variables are the most important effects, respectively. Hence, these variables and their possible interactions were studied more carefully. In optimized conditions, the column could tolerate up to 0.18 mol l⁻¹ sodium nitrate in the matrix. A 5 ml portion of a 0.02 mol l⁻¹ CTA was sufficient for loading of a 0.5 ml column prior to preconcentration of copper from a 150 ml sample solution. Matrix ions of Ca²⁺, Mg²⁺, Na⁺ and K⁺ and potentially interfering ions of Pb²⁺, Ni²⁺, Cd²⁺, Co²⁺, Zn²⁺ and Mn²⁺ with relatively high concentrations did not have any significant effect on the recovery of the analyte. A preconcentration factor of 60 and a detection limit of 1.0 μg l⁻¹ was obtained for the determination of copper by the flame AAS method. A precision better than 2.5%, expressed as R.S.D., was also achieved. Application of the method to tap water and two different river water samples resulted in values well confirmed by direct determinations with ET-AAS.     

On-line preconcentration system using a minicolumn of polyurethane foam loaded with Me-BTABr for zinc determination by Flame Atomic Absorption Spectrometry

In the present paper, an on-line system for preconcentration and determination of zinc by Flame Atomic Absorption Spectrometry (FAAS) is proposed. It is based in the sorption of zinc(II) ions on a minicolumn packed with polyurethane foam loaded with 2-[2′-(6-methyl-benzothiazolylazo)]-4-bromophenol (Me-BTABr) reagent. Chemical and flow variables as pH effect, sample flow rate and eluent concentration were optimized using univariate methodology. The results demonstrated that zinc can determinate using the sample pH in the range of 6.5-9.2, sample flow rate of 6.0 ml min⁻¹, and the elution step using 0.10 mol l⁻¹ hydrochloric acid solution at flow rate of 5.5 ml min⁻¹. In these conditions, an enrichment factor of 23 and a sampling rate of 48 samples per hour were achieved. The detection limit (DL, 3σ) as IUPAC recommendation was 0.37 μg l⁻¹ and the precision (assessed as the relative standard deviation, R.S.D.) reached values of 5.9-1.8% in zinc solutions of 1.0-10.0 μg l⁻¹ concentration, respectively. The method was successfully applied to the determination of trace amounts of zinc in natural water samples from Salvador (Brazil).     

Determination of nickel in natural waters by FAAS after sorption on octadecyl silica membrane disks modified with a recently synthesized Schiff's base

A simple, highly sensitive, accurate and selective method for the determination of trace amounts of Ni²⁺ ions in water samples is proposed. The method is based on the separation and preconcentration of Ni²⁺ on an octadecyl-bonded silica (ODBS) membrane disk modified by a recently synthesized Schiff’s base N,N′-bis (3-methylsalicylidene) ortho phenylene diamine (MSOPD) at pH 7. The synthesis of this extractant ligand is also described. The retained nickel on the membrane was eluted with 2×5 ml 0.5 M HNO₃ and measured by flame atomic absorption spectrometry (FAAS) at 232.0 nm. The extraction efficiency and the influence of the type and least amount of eluent for the stripping of Ni²⁺ from the disks, pH, flow rates of sample solution and eluent, amount of MSOPD, effect of other ions, and breakthrough volume were evaluated. The maximum capacity of the membrane disks modified by 3 mg of MSOPD was found to be 146±4 μg Ni²⁺. The 3σ limit of detection of the method was 30 ng per 1000 ml and also an enrichment factor of 250 was obtained. The proposed method has been applied to the determination of nickel in several water samples with satisfactory results.     

Selective extraction and release using (EDTA-Ni)-layered double hydroxide coupled with catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine for sensitive detection of copper ion

Copper is an important heavy metal in various biological processes. Many methods have been developed for detecting of copper ions (Cu²⁺) in aqueous samples. However, an easy, cheap, selective and sensitive method is still desired. In this study, a selective extraction-release-catalysis approach has been developed for sensitive detection of copper ion. Ethylenediaminetetraacetic acid (EDTA) chelated with nickel ion (Ni²⁺) were intercalated in a layered double hydroxide via a co-precipitation reaction. The product was subsequently applied as sorbent in dispersive solid-phase extraction for the enrichment of Cu²⁺ at pH 6. Since Cu²⁺ has a stronger complex formation constant with EDTA, Ni²⁺ exchanged with Cu²⁺ selectively. The resulting sorbent containing Cu²⁺ was transferred to catalyze the 3,3′,5,5′-tetramethylbenzidine oxidation reaction, since Cu²⁺ could be released by the sorbent effectively and has high catalytic ability for the reaction. Blue light emitted from the oxidation product was measured by ultraviolet–visible spectrophotometry for the determination of Cu²⁺. The extraction temperature, extraction time, and catalysis time were optimized. The results showed that this method provided a low limit of detection of 10 nM, a wide linear range (0.05–100 μM) and good linearity (r² = 0.9977). The optimized conditions were applied to environmental water samples. Using Cu²⁺ as an example, this work provided a new and interesting approach for the convenient and efficient detection of metal cations in aqueous samples.     

A new and direct method for the trace element determination in cauliflower by differential pulse polarography

Using the DPP polarograms of wet digested cauliflower sample in acetate buffer at pH values of 2, 4 and 6, Fe, Zn, Mo, Se, Cr, Cd, Pb, Ti and Cu quantities were determined. The best separation and determination conditions for Zn, Se and Mo was pH 2; for Cr, Zn, Mo and As was pH 4; for Pb pH 6, for Ti, Cu and Fe was pH 6-7 EDTA, for Cd pH 2 EDTA and for lead pH 6, all in acetate buffer. The trace element ranges for cauliflowers from two different seasons were (first figure for winter, the second for summer) for Se 120-250 μg g⁻¹, Fe 70-85 μg g⁻¹, Cu 320-150 μg g⁻¹, Ti 90-120 μg g⁻¹, Cr 130-630 μg g⁻¹, Zn 90-550 μg g⁻¹, Mo 170-230 μg g⁻¹, Cd 20 μg g⁻¹ (in winter) and Pb 130-300 μg g⁻¹ in dry sample. Cd was under the detection limit in summer. The length of digestion time had no effect on the recovery of copper, iron, molybdenum and zinc between 15 and 3 h of digestion.     

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydro pyrimidine-2-thiol [2′,4′-dinitro APTPT] has been described. Equal volumes (5 cm³) of the 2′,4′-dinitro APTPT (0.02 mol L⁻¹) in the presence of pyridine (0.5 mol L⁻¹) form an orange-red coloured ternary complex with gold(III) of molar ratio 1:1:1 at pH 1.8-2.4 with 5 min of shaking. The absorbance of coloured organic layer in 1,2-dichloroethane is measured spectrophotometrically at 445 nm against reagent blank. A pronounced synergism has been observed by the binary mixture of 2′,4′-dinitro APTPT and pyridine, which shows that the enhancement in the absorbance is observed in the presence of pyridine by the adduct formation in the organic phase. Beer's law was obeyed in the concentration range 2.5-20.0 μg mL⁻¹, with molar absorptivity and Sandell's sensitivity values of 8.7 × 10³ dm³ mol⁻¹ cm⁻¹ and 0.023 μg cm⁻² respectively. A repetition of the method was checked by finding relative standard deviation (R.S.D.) (n = 10) which was 0.17%. The composition of the gold(III)-2′,4′-dinitro APTPT-pyridine adduct was established by slope analysis, molar ratio and Job's method. The ternary complex was stable for more than 48 h. The influence of various factors such as pH, 2′,4′-dinitro APTPT concentration, solvent and pyridine on the degree of complexation has been established. A number of foreign ions tested for their interferences and use of suitable masking agents wherever necessary are tabulated, which show that selectivity of the method has been enhanced. The method is successfully employed for the determination of gold(III) in binary, synthetic mixtures and ayurvedic samples. The reliability of the method is assured by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Development of a ratiometric time-resolved luminescence sensor for pH based on lanthanide complexes

Time-resolved luminescence bioassay technique using lanthanide complexes as luminescent probes/sensors has shown great utilities in clinical diagnostics and biotechnology discoveries. In this work, a novel terpyridine polyacid derivative that can form highly stable complexes with lanthanide ions in aqueous media, (4′-hydroxy-2,2′:6′,2′′-terpyridine-6,6′′-diyl) bis(methylenenitrilo) tetrakis(acetic acid) (HTTA), was designed and synthesized for developing time-resolved luminescence pH sensors based on its Eu³⁺ and Tb³⁺ complexes. The luminescence characterization results reveal that the luminescence intensity of HTTA–Eu³⁺ is strongly dependent on the pH values in weakly acidic to neutral media (pK_a = 5.8, pH 4.8–7.5), while that of HTTA–Tb³⁺ is pH-independent. This unique luminescence response allows the mixture of HTTA–Eu³⁺ and HTTA–Tb³⁺ (the HTTA–Eu³⁺/Tb³⁺ mixture) to be used as a ratiometric luminescence sensor for the time-resolved luminescence detection of pH with the intensity ratio of its Tb³⁺ emission at 540 nm to its Eu³⁺ emission at 610 nm, I_540 nm/I_610 nm, as a signal. Moreover, the UV absorption spectrum changes of the HTTA–Eu³⁺/Tb³⁺ mixture at different pHs (pH 4.0–7.0) also display a ratiometric response to the pH changes with the ratio of absorbance at 290 nm to that at 325 nm, A_290 nm/A_325 nm, as a signal. This feature enables the HTTA–Eu³⁺/Tb³⁺ mixture to have an additional function for the pH detection with the absorption spectrometry technique. For loading the complexes into the living cells, the acetoxymethyl ester of HTTA was synthesized and used for loading HTTA–Eu³⁺ and HTTA–Tb³⁺ into the cultured HeLa cells. The luminescence imaging results demonstrated the practical utility of the new sensor for the time-resolved luminescence cell imaging application.     

A highly selective fluorescent sensor for Cu based on 2-(2′-hydroxyphenyl)benzoxazole in a poly(vinyl chloride) matrix

This paper describes a copper selective optical chemical sensor based on static quenching of the fluorescence of 2-(2′-hydroxyphenyl)benzoxazole entrapped in a poly(vinyl chloride) (PVC) membrane. The effect of the composition of the sensing membrane was studied, and experimental conditions were optimized. The sensors exhibit stable response over the concentration range from 4.0 × 10⁻⁸ M to 5.0 × 10⁻⁵ M Cu²⁺ at pH 4.0-6.5, and a high selectivity. The response time for Cu²⁺ with concentration ≤5 × 10⁻⁶ M is less than 7 min. The optode can be regenerated using 0.1 M HCl and acetate buffer solution. The sensor has been used for direct measurement of copper content in river water samples with a relative error less than 4% with reference to that obtained by atomic absorption spectrometry.