一种新型分子印迹聚合物基的化学发光阵列传感器

建立了一种分子印迹-化学发光阵列传感器测定甘氨酸的新方法. 该方法以甘氨酸为模板分子, 合成了分子印迹聚合物微球, 将该聚合物微球固定在96孔板上, 用它来识别丹磺酰氯标记的甘氨酸(Dns-Gly). 最后加入化学发光试剂(TCPO-H2O2-咪唑), 测量相对化学发光强度定量检测甘氨酸. 在最佳试验条件下, 相对化学发光强度和甘氨酸的浓度在0.2～60 μmol/L范围内成良好的线性关系, 相关系数为r＝0.9972, 方法的检出限为0.07 μmol/L, 对1 μmol/L甘氨酸溶液进行11次平行测定, 相对标准偏差为3.3% (n＝11). 由于以甘氨酸为模板分子合成出来的分子印迹聚合物空腔比较小, 避免了非特异性吸附, 使它在识别丹磺酰氯标记的甘氨酸时特异性、响应速度和灵敏度都有所增强.     

Preparation and biodegradation of sugar-containing poly(vinyl acetate) emulsions

To accelerate the biodegradability of poly(vinyl acetate)-based emulsions, emulsion copolymerizations of vinyl sugars, including triacetylated N-acetyl-D-glucosamine (GlcNAc)-substituted 2-hydroxyethyl methacrylate (GlcNAc(Ac)3-substituted HEMA), glucose-substituted HEMA (GEMA) and 6-O-vinyladipoyl-D-glucose (6-O-VAG) with vinyl acetate (VAc), were carried out using poly(vinyl alcohol) as an emulsifying agent in the presence of poly[(butylene succinate)-co-(butylene adipate)] [poly(BS-co-BA)]. Copolymerization with GEMA produced a stable emulsion and that with 6-O-VAG also produced a homogeneous emulsion. Their biodegradation tests indicated that PVAc main chain scission was accelerated by copolymerization with vinyl sugars.     

含茋生色团聚醚的合成与热致液晶行为

β 氯乙基缩水甘油醚 (GCE)和GCE/羟丁基乙烯基醚 (HBVE)分别通过阳离子聚合、光引发共聚合 ,获得两种聚醚 ,然后再分别与 4 硝基 4′ 羟基 (NHS)反应 ,制备了两种侧链含生色团的液晶聚合物(PSEG、PSV) .用FTIR、1H NMR和EA对其化学结构及生色团含量进行了表征 ,以POM、DSC、TGA和WAXD对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究 .结果表明 ,这类聚合物属向列型热致双向性液晶 ,液晶相转变温度较低、范围较宽 ;聚合物热稳定性较好 ,开始分解温度在 30 0℃以上 .     

NMR study of model compounds of vinyl polymers

Complicated NMR spectra of vinyl polymers provide conformational and configurational knowledge of the polymers in solution. Explicit expressions for the spectral frequencies and intensities are obtained by the analysis of vinyl polymers and their model compounds as weakly coupled systems. The classified spectra expected for common vinyl polymers are presented by using the results of the analysis. The analysis is applied to model compounds of poly(vinyl alcohol) and poly(vinyl acetate) in solution. The results show that conformations of poly(vinyl alcohol) are determined by the intramolecular hydrogen bonding so that the syndiotactic isomer forms a helical structure, the isotactic one a planar zigzag structure. The poly(vinyl acetate) produces a helical structure for isotactic isomer by the repulsion of side chains and a planar zigzag for the syndiotactic isomer.     

Surface imprinted thin polymer film systems with selective recognition for bovine serum albumin

Molecularly imprinted polymers are synthetic antibody mimics formed by the crosslinking of organic or inorganic polymers in the presence of an analyte which yields recognitive polymer networks with specific binding pockets for that biomolecule. Surface imprinted polymers were synthesized via a novel technique for the specific recognition of bovine serum albumin (BSA). Thin films of recognitive networks based on 2-(dimethylamino)ethyl methacrylate (DMAEMA) as the functional monomer and varying amounts of either N,N′-methylenebisacrylamide (MBA) or poly(ethylene glycol) (400) dimethacrylate (PEG400DMA) as the crosslinking agent were synthesized via UV free-radical polymerization and characterized. A clear and reproducible increase in recognition of the template BSA was demonstrated for these systems at 1.6-2.5 times more BSA recognized by the MIP sample relative to the control polymers. Additionally, these polymers exhibited selective recognition of the template relative to competing proteins with up to 2.9 times more BSA adsorbed than either glucose oxidase or bovine hemoglobin. These synthetic antibody mimics hold significant promise as the next generation of robust recognition elements in a wide range of bioassay and biosensor applications.     

Novel Potentiometric Sensors of Molecular Imprinted Polymers for Specific Binding of Chlormequat

Molecularly imprinted polymers (MIP) were used as potentiometric sensors for the selective recognition and determination of chlormequat (CMQ). They were produced after radical polymerization of 4‐vinyl pyridine (4‐VP) or methacrylic acid (MAA) monomers in the presence of a cross‐linker. CMQ was used as template. Similar non‐imprinted (NI) polymers (NIP) were produced by removing the template from reaction media. The effect of kind and amount of MIP or NIP sensors on the potentiometric behavior was investigated. Main analytical features were evaluated in steady and flow modes of operation. The sensor MIP/4‐VP exhibited the best performance, presenting fast near‐Nernstian response for CMQ over the concentration range 6.2×10⁻⁶–1.0×10⁻² mol L⁻¹ with detection limits of 4.1×10⁻⁶ mol L⁻¹. The sensor was independent from the pH of test solutions in the range 5–10. Potentiometric selectivity coefficients of the proposed sensors were evaluated over several inorganic and organic cations. Results pointed out a good selectivity to CMQ. The sensor was applied to the potentiometric determination of CMQ in commercial phytopharmaceuticals and spiked water samples. Recoveries ranged 96 to 108.5%.     

In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

可交联的PMMA型和PS型高热稳定性二阶非线性光学材料的合成与表征

采用封管反应的方法,以较高产率(80%以上)合成了一系列含环氧基团的可交联PMMA型和PS型极化聚合物材料,该材料具有很好的成膜性.用DSC和T_gA等方法研究了聚合物固化前后的热性能,结果表明,由于聚合物在极化后期经热固化使引入的环氧基团开环交联,聚合物的玻璃化转变温度(T_g)较固化前明显提高30～50K.同时,固化后的聚合物具有较高的热分解温度(T_d>543K).对聚合物的二阶非线性光学性质的测试结果表明,在室温下放置100h后,聚合物的电光系数r₃₃值均保持在初始值的75%以上.这是由于环氧基团的开环使固化后的聚合物本身产生一定程度的交联,导致取向后的发色团被聚合物的交联网禁锢而不易弛豫,从而使这类PMMA型和PS型二阶非线性聚合物材料的热稳定性能得以提高.     

Analytical followup of the gamma initiated synthesis of a molecularly imprinted polymer

A molecularly imprinted polymer (MIP) for the template phenytoin has been prepared by gamma initiated copolymerization of methacrylamide and ethylene glycol dimethacrylate. The progress of polymerization was studied by measuring the monomer conversions and the template binding properties of the resulting polymers, respectively. The consumption rate of the two monomers showed different course. There was no difference observed in the polymerization rates of the MIP and the control polymer (NIP). The template binding properties of the MIP and the NIP changed considerably with the progress of the polymerization process and became similar to those of the thermally initiated polymers after full conversion.     

Application of R.O.P. in polymerization of furanic oligoesters with cyclic esters: Synthesis,characterization and degradation

Furano-Aliphatic copolyesters, such as poly(propylene furanic)-co-(polycaprolactone) (PPF-co-PCL), Poly(propylene furanic)-co-(polylactide) (PPF-co-PLA) and Poly(propylene furanic)-co-(polyglycolide) (PPF-co-PGA) were prepared by ring opening polymerization (R.O.P.) using monomers derived from renewable resources. These copolyesters were characterized by ¹H-NMR, DSC and TGA. The degree of randomness determined by ¹H-NMR is close to 1, reflecting a random distribution, sometimes less than one. This indicates that these polyesters have a character to block. The hydrolytic degradation of polymers was performed at pH 4.35 at 37°C over a period of four weeks. The oxidative degradation proved a mass loss of about 50%.     

Studies on molecular weight of poly ((vinylidene chloride)-co-(vinyl chloride)) in the suspension process

Various factors affecting the molecular weight of poly ((vinylidene chloride)-co-(vinyl chloride)) were studied in the paper. Mathematical models correlating intrinsic viscosity of the copolymer with concentrations of 1,2-dichloroethane and initiators, and temperature were proposed and may be used to control the molecular weight of the copolymer.     

Characterization of molecularly imprinted polymers employing crosslinkers with nonsymmetric polymerizable groups

Crosslinking monomers have been developed with a combination of methacrylamide and methacrylate or vinyl ketone polymerizable groups that provide molecularly imprinted polymers (MIPs) with improved binding and selectivity. The differential reactivity rates of the polymerizable groups prompted an investigation into the time‐dependent behavior of the crosslinkers, which suggests a new mechanism for MIP formation. The mechanism involves the formation of long sections of linear poly(vinyl ketone) with pendant methacrylamide groups that form a highly crosslinked network in a subsequent step. This has implications for the sequence morphology of polymers, affecting the structure and improving the binding properties of MIPs. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3668–3675, 2004     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

A FOURIER TRANSFORM INFRARED SPECTROSCOPIC STUDY OF THE REACTION BETWEEN POLY (VINYL PYRIDINE)S AND EPOXY COMPOUNDS

Chemical reactions between poly (vinyl pyridine)s and 1, 4-butanediol diglycidyl ether and other epoxy compounds were studied by Fourier transform infrared spectroscopy and other techniques. The epoxy group was found to react with the pyridine side group of poly (4-vinyl pyridine), forming crosslinked networks which contain cyclic amide structures. The reaction was also observed in the interracial region of poly(vinyl pyridine) and γ-glycidoxy propyl trimethoxysilane hydrolyzate (γ-GPS) coatings on PET fiber substrates. Poly(2-vinyi pyridine) does not show the same reaction.     

Optimization of polymerization parameters for the sorption of oseltamivir onto molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for a given analyte, or group of structurally related compounds. The influence of the process parameters (the moles of functional monomer and cross-linker, the selection of functional monomer and solvent) on the preparation of oseltamivir (OS)-imprinted polymers was investigated. A mathematical method for uniform design to optimize these selected parameters and to increase the MIP selectivity for template molecules was applied. The optimal conditions to synthesize MIP were 0.69 mmol 30% acrylamide (AA) + 70% 4-Vinylpyridine (4-VP) and 5.0 mmol ethylene glycol dimethacrylate (EGDMA) copolymerized in 5 ml toluene in the presence of 0.1 mmol OS. MIP showed high affinity and selectivity for separation of the template molecule from other compounds. In the present study, we have established an effective LC-MS/MS method to identify and quantify OS with good sensitivity, accuracy and precision.     

Synthesis and evaluation of new lipomonosaccharide-imprinted polymers as MISPE supports

Molecular imprinted polymers (MIP) were prepared by the copolymerization of styrene (S) or methyl methacrylate (MMA) and methacrylic acid (MAA) using ethylene glycol dimethacrylate (EGDMA) as the crosslinker with molar ratios of [monomer]/[crosslinker] and [MAA]/[template] of 3:7 (to obtain a rigid structure) and 1:6 (to optimise hydrogen interactions), respectively. The polymerizations occurred in presence of the template molecule (MIP) - GlcNcouma - an amphiphilic monosaccharide. The same materials, non-imprinted polymers (NIP), were also prepared in absence of the template. These MIPs were characterized and used as SPE supports for selective enrichment. The results showed the correlation between retention efficiency and the porogen character of the polymerization solvent.     

Polypyrrole Grafts Synthesized via Electrochemical Polymerization

Abstract

Electrically conducting polypyrrole grafts with poly[(methyl meth-acrylate)-co-(2-(N-pyrrolyl) ethyl methacrylate)] (PMMA-co-PEMA) were synthesized by constant potential electrolysis. Cyclic Voltammetry, DSC, TGA, SEM and elemental analysis were used in order to characterize the free standing films. Conductivities of the polymers were measured by a four-probe technique.     

The complete replacement of antibodies by protein-imprinted poly(ethylene-co-vinyl alcohol) in sandwich fluoroimmunoassays

The replacement of antibodies by molecularly imprinted polymers (MIPs) has been investigated for many decades. However, indirect protocols (including natural primary and secondary antibodies) are still utilized to evaluate the ability of MIP thin films to recognize target molecules. MIPs can be prepared as either a thin film or as particles, and cavities that are complementary to the template can be generated on their surfaces. We have prepared thin film MIPs and particle MIPs prepared by solvent evaporation and phase inversion, respectively, from solutions of poly(ethylene-co-vinyl alcohol) (pEVAL) in the presence of the target analytes amylase, lysozyme, and lipase. These were first adsorbed on MIP thin films and by MIP particles that contain fluorescent quantum dots. Sandwich fluoroimmunoassays were then conducted to quantify them in MIP-coated 96-well microplates. The method was applied to determine amylase in saliva, and results were compared with a commercial analytical system.

Synthesis of an enzyme-like imprinted polymer with the substrate as the template, and its catalytic properties under aqueous conditions

Transition state analogues (TSAs) have long been regarded as ideal templates for the preparation of catalytically active synthetic imprinted polymers. In the current work, however, a new type of molecularly imprinted polymer (MIP) was synthesized with the substrate (homovanillic acid, HVA) as the template and hemin introduced as the catalytic center, with the use of plural functional monomers to prepare the active sites. The MIP successfully mimicked natural peroxidase, suggesting that it may not be imperative to employ a TSA as the template when preparing enzyme-like imprinted polymers and that the imprinted polymer matrix provided an advantageous microenvironment around the catalytic center (hemin), essentially similar to that supplied by apo-proteins in natural enzymes. Significantly, by taking advantage of the special structure of hemin and multiple-site interactions provided by several functional monomers, the intrinsic difficulties for MIPs in recognizing template molecules in polar solutions were overcome. The newly developed polymer showed considerable recognizing ability toward HVA, catalytic activity, substrate specificity and also stability, which are the merits lacked by the natural peroxidase. Meanwhile, the ease of recovery and reuse the MIP implies the potential for industrial application.     

Macroporous molecularly imprinted polymer/cryogel composite systems for the removal of endocrine disrupting trace contaminants

A new concept for the preparation of selective sorbents with high flow path properties is presented by embedding molecularly imprinted polymers (MIPs) into various macroporous gels (MGs). A MIP was first synthetized with 17beta-estradiol (E2) as template for the selective adsorption of this endocrine disrupter. The composite macroporous gel/MIP (MG/MIP) monoliths were then prepared at subzero temperatures. Complete recovery of E2 from a 2 microg/L aqueous solution was achieved using the polyvinyl alcohol (PVA) MG/MIP monoliths whereas only 49-74% was removed with non-imprinted polymers (when no template was used). The PVA MG/MIP monolith columns were operated at almost 10 times higher flow rate (50 mL/min) compared to the MIP columns with operation flow rate of 1-5 mL/min. The possibility for processing the particulate containing wastewater effluents at high flow rates with selectivity on E2 removal, as well as the easy preparation of the monoliths, make the macroporous MG/MIP systems attractive and robust sorbents for the clean up of water from endocrine disrupting trace contaminants.