Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

A diamide-diamine based Cu chromogenic sensor for highly selective visual and spectrophotometric detection

A diamide-diamine based sensor 3 possessing anthracene-9,10-dione as a chromogenic moiety has been synthesized and demonstrates a highly selective colour change from red to blue with Cu²⁺ for visual detection of Cu²⁺ (5-50 μM). Other metal ions, viz. Fe²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Ag⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations do not lead to any change in colour and their presence does not interfere with the visual and quantitative analysis of Cu²⁺. The selective deprotonation of an aryl amine NH by Cu²⁺ is responsible for a bathochromic shift and significant colour changes. Significantly, the stability of the 3·Cu²⁺ complex between pH 7 and 12 allows Cu²⁺ estimation under neutral and basic conditions.     

Preparation and metal binding behavior of poly(4-vinylbenzyl 2-hydroxyethyl) sulfoxide and sulfone

In order to explore the reuse properties of oxidized chelating resin containing sulfur after adsorption, two kinds of novel chelating resins, poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfoxide (PVBSO) and poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfone (PVBSO₂), were synthesized using poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfide (PVBS) as material. Their structures were confirmed by FTIR and XPS. The adsorption properties and mechanism for metal ions such as Au³⁺, Pt⁴⁺, Pd²⁺, Hg²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Pb²⁺, Cd²⁺, and Zn²⁺ were investigated. Experimental results showed that PVBSO had good adsorption and selective properties for Au³⁺, Pd²⁺ and Cu²⁺ when the coexisting ion was Pt⁴⁺, Ni²⁺, Pb²⁺ or Cd²⁺. In the aqueous system containing Cu²⁺ and Pb²⁺ or Cu²⁺ and Cd²⁺, PVBSO₂ only adsorbed Cu²⁺. The selective coefficients of PVBSO and PVBSO₂ were α_Au/Pt = 4.8, α_Au/Pd = 11.8, α_Pd/Pt = 10.9, α_Cu/Ni = 2.5, α_Cu/Cd = 41.2, α_Cu/Pb = ∞, α_Cu/Ni = 3.0, α_Cu/Cd = ∞, α_Cu/Pb = ∞, respectively.     

A new fluorescent sensor bearing three dansyl fluorophores for highly sensitive and selective detection of mercury(II) ions

A novel fluorometric sensor bearing three dansyl moieties based on tris[2-(2-aminoethylthio)ethyl]amine was prepared by a simple approach using a conventional two-step synthesis. The sensor exhibits highly Hg²⁺-selective ON-OFF fluorescence quenching behavior in aqueous acetonitrile solutions and is shown to discriminate various competing metal ions, particularly Cu²⁺, Ag⁺, and Pb²⁺ as well as Ca²⁺, Cd²⁺, Co²⁺, Fe³⁺, Mn²⁺, Na⁺, Ni²⁺, and Zn²⁺, with a detection limit of 1.15 × 10⁻⁷ M or 23 ppb.     

Complexation of metal ions with the novel azathia crown ethers carrying anthracene pendant in acetonitrile–dichloromethane

A series of crown ethers carrying an anthracene group with nitrogen–sulfur donor atom, which differ in having three, four and five sulfur atoms in the macrocycle was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl-anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile–dichloromethane (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Cu²⁺, Hg²⁺ and Pb²⁺ the results of which disclosed the complexation compositions and complex stability constants of the novel ligands with these cations. The monoazapentathia crown ether showed sensitivity for Al³⁺ with linear range and detection limit of 2.6 × 10⁻⁶ M–2.6 × 10⁻⁵ M and 8.1 × 10⁻⁷ M, respectively.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

On-line preconcentration and simultaneous determination of heavy metal ions by inductively coupled plasma-atomic emission spectrometry

A flow injection analysis system for on-line preconcentration and simultaneous determination of Bi³⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺ and Zn²⁺ in aqueous samples by inductively coupled plasma (ICP)-atomic emission spectrometry with a charge coupled detector is described. The preconcentration of analytes is accomplished by retention of their chelates with sodium diethyldithiocarbamate in aqueous solution on a solid phase containing octadecyl silica in a minicolumn. Methanol, as eluent, is introduced into the conventional nebulizer of the ICP instrument. The effects of different parameters, including preconcentration flow rate (equal to sample flow rate (SR)), eluent flow rate (ER), weight of solid phase (W) and eluent loop volume (EV), were optimized by the super-modified simplex method. The optimum conditions were evaluated to be SR 7.2 ml min⁻¹, ER 3.5 ml min⁻¹, W of 100 mg and EV of 0.8 ml. An enrichment factor of 312.5 for each analyte was obtained. The detection limits of the proposed method for Bi³⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were evaluated as 1.3, 1.0, 0.8, 0.3, 14.7, 0.5, 5.5 and 0.1 ng l⁻¹, respectively. The effect of several metal ions on percent recovery was also studied. The method was applied to the recovery of these heavy metals from real matrices and to the simultaneous determination of these cations in different water samples.     

Probing trace Pb(2+) using electrodeposited N,N'-(o-phenylene)-bis-benzenesulfonamide polymer as a novel selective ion capturing film

A novel film modified electrode for the determination of trace lead was developed in this work. The modified electrode was prepared by the electropolymerization of N,N′-(o-phenylene)-bis-benzenesulfonamide (PBSA) as the ion capturing reagent to create the functional film. The modified electrode shows a high selectivity towards Pb²⁺ over interfering cations, e.g. Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cr²⁺, and the calibration curve was linear in the concentration range of 2.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M with correlation coefficient of 0.999. For 20 min accumulation, detection limit of 1.0 × 10⁻⁹ M was obtained at the signal to noise ratio of 3. Analytical availability of the modified electrode was demonstrated by the application for samples from pond water.     

Electrodes with extremely high hydrogen overvoltages as substrate electrodes for stripping analysis based on bismuth-coated electrodes

Hydrogen evolution bothers stripping analysis significantly. Dioctyl phthalate-based carbon paste electrode exhibits extremely wide cathodic potential window. It is explored as a powerful substrate electrode to solve the problem of hydrogen evolution and further improve reproducibility for stripping analysis using bismuth-coated electrodes for the first time. It was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺. Linear responses are obtained for Zn²⁺ in the range of 10–100 μg L⁻¹ and for Pb²⁺ and Cd²⁺ in the range of 5–100 μg L⁻¹. The detection limits for Zn²⁺, Cd²⁺, and Pb²⁺ are 0.1 μg L⁻¹, 0.22 μg L⁻¹ and 0.44 μg L⁻¹, respectively. The method has been successfully applied to the determination of Zn²⁺, Cd²⁺, and Pb²⁺ in waste water samples. The detection strategy based on the combination of dioctyl phthalate-based carbon paste electrode and bismuth-coated electrodes holds great promise for stripping analysis.     

Evaluation of yeast strains as possible agents for trace enrichment of metal ions in aquatic environments

Sorption properties of six yeast strains were evaluated for trace enrichment of metal ions; Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Pb²⁺, and Zn²⁺ from aqueous environments. Metal concentration was determined by flame atomic absorption spectrometry (FAAS). The results showed that trace enrichment of the metals under study with yeast, was dependent on the pH and available metal ions. Enrichment time of 30 min gave an optimum metal uptake. The presence of Na⁺, K⁺, and Ca²⁺ suppressed the uptake of Pb by less than 5%, but suppressed the uptake of Zn by between 15 and 25%. Mg²⁺, Cu⁺, Cu²⁺, Cr³⁺ Cr⁶⁺, Cd²⁺, and Zn²⁺ suppressed the uptake of Pb by between 25 and 35%, and that of Zn by between 15 and 25%. For both Pb and Zn, Cd had the highest suppression of 35 and 30%, respectively for baker's yeast (Saccharomyces cerevisiae). Baker's yeast achieved enrichment factors (EF) of 23, 4, 100, and 1 for dam water, stream water, treated wastewater, and industrial effluent samples for Cu, Pb, Zn, and Cr, respectively. The recoveries of optimised Cd and Cr samples spiked with 2 μg ml⁻¹ of the metal could reach up to 90%, but never exceeded 66% for 10 μg ml⁻¹ samples. For Cu and Pb, the recoveries generally increased independent of concentration, however they were not as high as those for Zn, which exceeded 90% for all the samples spiked with 10 μg ml⁻¹ of the metal. S. cerevisiae PR 61/3 had the highest EF for Cr as compared to the other yeast strains. S. cerevisiae PRI 60/78 was the only yeast strain which was able to enrich Cd in all the samples. Baker's yeast had the highest EFs for Cu and Zn as compared to the other yeast strains without pH adjustment of the water samples. Candida tropicalis attained the highest EFs for Pb as compared to the other yeast strains. The results indicate that all the yeast strains used had a high affinity for Zn based on the EF values achieved. The results from these studies demonstrate that yeast is a viable trace metal enrichment agent that can be used freely suspended in solution to enrich metal ions at relatively low concentrations. This has ramifications on the traditional methods of sampling, sample collection, and transportation from remote sampling sites.     

In-channel indirect amperometric detection of heavy metal ions for electrophoresis on a poly(dimethylsiloxane) microchip

In-channel indirect amperometric detection mode for microchip capillary electrophoresis with positive separation electric field is successfully applied to some heavy metal ions. The influences of separation voltage, detection potential, the concentration and pH value of running buffer on the response of the detector have been investigated. An optimized condition of 1200 V separation voltage, −0.1 V detection potential, 20 mM (pH 4.46) running buffer of 2-(N-morpholino)ethanesulfonic acid (MES) + l-histidine (l-His) was selected. The results clearly showed that Pb²⁺, Cd²⁺, and Cu²⁺ were efficiently separated within 80 s in a 3.7 cm long native separation PDMS/PDMS channel and successfully detected at a single carbon fibre electrode. The theoretical plate numbers of Pb²⁺, Cd²⁺, and Cu²⁺ were 1.2 × 10⁵, 2.5 × 10⁵, and 1.9 × 10⁵ m⁻¹, respectively. The detection limits for Pb²⁺, Cd²⁺, and Cu²⁺ were 1.3, 3.3 and 7.4 μM (S/N = 3).     

A novel benzothiazole based azocalix[4]arene as a highly selective chromogenic chemosensor for Hg ion: A rapid test application in aqueous environment

A novel calix[4]arene derivative containing benzothiazole azo groups at the upper rim was synthesized as chromogenic chemosensor, and its binding and sensing properties with heavy metal ions (Pb²⁺, Hg²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Co²⁺, Fe²⁺, Mn²⁺, Cr³⁺, Ag⁺) were investigated by UV-vis spectroscopy and voltammetric techniques. The results of spectroscopic and voltammetric experiments showed that the chromogenic chemosensor has high selectivity towards Hg²⁺ ion over the other heavy metal ions. Moreover, it was shown that the interaction between Hg²⁺ and the chromogenic chemosensor occurs by means of the benzothiazole azo groups at the upper rim by using differential pulse voltammetry. The stoichiometric ratio and the association constant were determined as 1:1 and (6.1 ± 0.3) × 10⁵ L mol⁻¹ for the complex between Hg²⁺ and the ionophore. Furthermore, we prepared a rapid test kit for early detection of Hg²⁺ in aqueous environment in the concentration range of 1 × 10⁻⁴ to 1 × 10⁻² M.     

Aminodiacetic water-soluble polymer-metal ion interactions

The retention properties for metal ions, the maximum retention capacity, the antibacterial and mutagenic activity of water-soluble metal ion complexes from water-soluble poly[2-hydroxy-(3-methacryloyloxypropyl)aminodiacetic acid] P(HMPADA) were studied. HMPADA was synthesized by radical polymerization in aqueous solution. The water-soluble polymer (WSP) P(HMPADA), containing ester, hydroxy, tertiary amine, and two carboxylic acid groups in every monomeric unit was investigated as polychelatogen in view of its potential metal ion binding properties using the liquid-phase polymer based retention (LPR) technique under different experimental conditions. The water-soluble complexes were investigated as biocides. Metal ions investigated at pH 3, 5, and 7 were: Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Al³⁺, Cr³⁺, and Fe³⁺. Depending on pH, P(HMPADA) showed a different interaction affinity, where the highest interaction occurred at pH 7. Polymer-metal ion interaction showed the following affinity order: tri-valent >di-valent >mono-valent ion. Maximum retention capacity (MRC) ranged between 17.2 and 342.2 mg metal ion/g polymer for Cu²⁺ and Ag⁺, respectively. FT-IR showed a variation in νCO, νΟ−CO, νOH absorption signals, and Far-IR showed new signals corresponding to metal-O and metal-N interaction, indicating a participation of carboxylic acid, amine, and hydroxy groups of polymer-metal ion complexes. Antibacterial activity of Ag⁺, Cu²⁺, Zn²⁺, and Cd²⁺ complexes were studied. These complexes presented a higher biocide activity against Staphylococcus aureus (Gram-positive) than for Escherichia coli (Gram-negative) with a lowest minimum inhibitory concentration (MIC) of 4 mg/mL for polymer-Cd²⁺ complex. Scanning electron microscopy (SEM) showed the interaction between polymer-metal ion complexes and bacteria surface. All samples showed low genotoxic activity.     

Effect of dimensions of multi-walled carbon nanotubes on its enrichment efficiency of metal ions from environmental waters

The effect of dimensions (length and external diameter) of multi-walled carbon nanotubes (MWCNTs) on its preconcentration efficiency towards some metal ions (Pb²⁺, Cd²⁺, Cu²⁺, Zn²⁺ and MnO₄⁻) from environmental waters prior to their analysis by flame atomic absorption spectroscopy (FAAS) was investigated. MWCNTs (as-received from the manufacturer) of various external diameters and lengths were involved. Other variables optimized included effects of pH of water sample, composition and volume of eluent, mass of the MWCNTs, breakthrough volume and coexisting ions. Maximum recovery of metal ions was obtained at pH 9 where it was thought that precipitation of metals as their hydroxides played the major factor in metals uptake by MWCNT. It was suggested that the use of appropriate dimensions of MWCNTs may support the trapping process of the precipitated metal hydroxides by MWCNTs. It was found that long MWCNT of length 5-15 μm and external diameter 10-30 nm gave the highest enrichment efficiency towards almost all the targeted metal ions. It could be used for preconcentration of MnO₄⁻, Cu²⁺, Zn²⁺ and Pb²⁺ with almost full recovery; but not for Cd²⁺ due to its low recovery. The optimized solid phase extraction (SPE) procedure was capable of determining metal ions in the linear range 20-100 ng mL⁻¹ (except for Zn²⁺ from 20 to 150 ng mL⁻¹). Detection limits were 0.709 ng mL⁻¹ for MnO₄⁻, 0.278 ng mL⁻¹ for Pb²⁺, 0.465 ng mL⁻¹ for Cu²⁺, 0.867 ng mL⁻¹ for Zn²⁺. Application of the optimized SPE procedure to environmental waters (tap water, reservoir water and stream water) gave spike recoveries of the metals in the range of 81-100%.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of a novel crosslinked superabsorbent copolymer with diazacyclooctadecane crown ether and its sorption capability

A novel crosslinked poly(acrylic acid-copolymer-Kryptofix-22-DM) superabsorbent copolymer, poly(AA-co-Kry22-DM), was synthesised by the reaction of 4,13-dimethylacryloyl-1,7,10,16-tetraoxa-4,13-diazacyclooctadecane (Kyrptofix-22-DM) and acrylic acid (AA). Characterisation of the polymers was achieved by FTIR and ¹H NMR techniques. Sorption capacity of the crosslinked poly(AA-co-Kry22-DM) superabsorbent copolymer was investigated for Pb²⁺, Cu²⁺, Cr³⁺, Cd²⁺, Mn²⁺, Zn²⁺, and Ni²⁺ heavy metal ions at different pH values using Freundlich and Langmuir isotherms. Swelling ratio, q_v, and distribution ratio, log D, values of the crosslinked poly(AA-co-Kry22-DM) superabsorbent copolymer were calculated at various pH values.     

Maßanalyse und Katalyse

The direct titration of EDTA and DCTA as well as the determination of a number of metal ions (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Sn²⁺, Al³⁺, In³⁺, Ga³⁺, Th⁴⁺) by backtitration with manganese(II) standard solution is described. The decomposition of hydrogen peroxide and the reaction between hydrogen peroxide and resorcinol, both catalysed by manganese, have been used as indicator systems.     

Über die Extrahierbarkeit von Metallverbindungen der Diphenylarsinsäure

Zusammenfassung Es wird über die Möglichkeit berichtet, Metallionen aus wäßriger Lösung mit Hilfe organischer Lösungsmittel als Verbindungen der Diphenylarsinsäure extrahieren zu können. Von den untersuchten Ionen Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ und Mg²⁺ sind mit Chloroform nur Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ und Al³⁺ extrahierbar. Mit Trichloräthylen ist praktisch nur mehr Pb²⁺ extrahierbar, während Benzol und Essigester keinerlei Extraktionswirkung zeigen. Vergleiche mit dem Verhalten aliphatischer Arsinsäuren werden angestellt.

---

Summary A report is given concerning the possibility of extracting metal ions from aqueous solution by means of organic liquids as compounds of diphenylarsinic acid. The ions investigated included Fe³⁺, Al³⁺, Bi³⁺, UO₂ ²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺, and Mg²⁺. Of these only Pb²⁺, Bi³⁺, Be²⁺, Zn³⁺ and Al³⁺ are extractable with chloroform. With trichloro ethylene only Pb²⁺ is extractable, whereas benzene and acetic ester show no extraction action. Comparisons were made with the behavior of aliphatic arsinic acids.

---

Résumé On décrit la possibilité d'extraction d'ions métalliques à l'état de composés de l'acide diphénylarsinique, à partir de leur solution aqueuse, à l'aide d'un solvant organique. Parmi les ions étudiés, Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ et Mg²⁺, seuls Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ et Al³⁺ peuvent être extraits par le chloroforme. Le trichloréthyléne ne permet que l'extraction du Pb²⁺, cependant que le benzène et l'ester acétique ne manifestent aucune activité d'extraction. On établit une comparaison avec le comportement des acides arsiniques aliphatiques.