Synthesis and structures of gold(I) phosphine complexes containing monoanionic selenocarbamate ester ligands

A series of mono- and dinuclear gold(I) phosphine complexes of the type [Au{SeC(OMe)NPh}(P)] [P = PPh₃, PTA, P(o-tolyl)₃, P(p-MeOC₆H₄)₃] and [Au₂{SeC(OMe)NPh}₂(μ-PP)] (PP = dppm, dppe, dppp, dppf, dppee) were prepared from the reaction of the appropriate chlorogold(I) phosphine complexes with N-phenyl-O-methylselenocarbamide in the presence of base. These new complexes were fully characterised by spectroscopic techniques and, in several cases, by X-ray crystallography. The differences in the solid-state structures of these selenium complexes were compared with those of some sulfur analogues.     

Stable (aryl)(phosphino)carbenes: new ligands for transition metals

The first direct complexation of a stable phosphino carbene to a transition metal center is described. Both eta1- and eta2-coordination modes have been characterized spectroscopically. The Fischer-type structure of the eta1-carbene rhodium complex was revealed by an X-ray diffraction study.     

Titanium(IV) terminal hydroxo complexes containing chelating bis(phosphine oxide) ligands

Treatment of [L_OEtTi(OTf)₃] (, OTf⁻ = triflate) with S-binapO₂ (binap = 2,2′-bis(diphenylphosphinoyl)-1,1′-binaphthyl) afforded the terminal hydroxo complex [L_OEtTi(S-binapO₂)(OH)][OTf]₂ (1). Treatment of [L_OEtTi(OTf)₃] with K(tpip) (tpip⁻ = [N(Ph₂PO)₂]⁻) afforded [L_OEtTi(tpip)(OTf)][OTf] (2) that reacted with CsOH to give [L_OEtTi(tpip)(OH)][OTf] (3). The structures of 1 and 2 have been determined.     

Coordinating anions: (phosphino)tetraphenylborate ligands as new reagents for synthesis

Anionic, electron-releasing phosphines that incorporate a borate counteranion within the ligand framework are promising reagents for organometallic catalysis. This report describes the synthesis of a new class of monodentate tertiary phosphines built upon the commonly employed tetraphenylborate anion. These new phosphines are highly stable and strongly electron-releasing and readily coordinate transition metals. Moreover, they are promising reagents for catalysis, as demonstrated by their ability to promote the Suzuki cross-coupling of aryl chloride substrates.     

Precursors to water-soluble dinitrogen carriers. Synthesis of water-soluble complexes of iron(II) containing water-soluble chelating phosphine ligands of the type 1,2-bis(bis(hydroxyalkyl)phosphino)ethane

The reactions of the water-soluble chelating phosphines 1,2-bis(bis(hydroxyalkyl)phosphino)ethane (alkyl = n-propyl, DHPrPE; n-butyl, DHBuPE; n-pentyl, DHPePE) with FeCl(2).4H(2)O and FeSO(4).7H(2)O were studied as routes to water-soluble complexes that will bind small molecules, dinitrogen in particular. The products that form and their stereochemistry depend on the solvent, the counteranion, and the alkyl chain length on the phosphine. In alcoholic solvents, the reaction of FeCl(2).4H(2)O with 2 equiv of DHBuPE or DHPePE gave trans-Fe(L(2))(2)Cl(2). The analogous reactions in water with DHBuPE and DHPePE gave only cis products, and the reaction of FeSO(4).7H(2)O with any of the phosphines gave only cis-Fe(L(2))(2)SO(4). These results are interpreted as follows. The trans stereochemistry of the products from the reactions of FeCl(2).4H(2)O in alcohols is suggested to be the consequence of the trans geometry of the Fe(H(2)O)(4)Cl(2) complex, i.e., substitution of the water molecules by the phosphines retains the geometry of the starting material. The formation of cis-Fe(DHPrPE)(2)Cl(2) is an exception to this result because the coordination of two -OH groups forms two six-membered rings, as shown in the X-ray structure of the molecule. DHBuPE and DHPePE reacted with FeSO(4).7H(2)O in water to initially yield cis-Fe(P(2))(2)SO(4) compounds, but subsequent substitution reactions occurred over several hours to give sequentially trans-Fe(DHBuPE)(2)(H(2)O)(SO(4)) and then trans-[Fe(DHBuPE)(2)(H(2)O)(2)]SO(4). The rate constants and activation reactions for these aquation reactions were determined and are consistent with dissociatively activated mechanisms. The cis- and trans-Fe(L(2))(2)X (X = (Cl)(2) or SO(4)) complexes react with N(2), CO, and CH(3)CN to yield trans complexes with bound N(2), CO, or CH(3)CN. The crystal structures of the cis-Fe(DHPrPE)(2)SO(4), trans-Fe(DHPrPE)(2)(CO)SO(4), trans-Fe(DHBuPE)(2)Cl(2), trans-[Fe(DHBuPE)(2)(CO)(Cl)][B(C(6)H(5))(4)], trans-Fe(DMeOPrPE)(2)Cl(2), trans-Fe(DMeOPrPE)(2)Br(2), and trans-[Fe(DHBuPE)(2)Cl(2)]Cl complexes are reported. As expected from using water-soluble phosphines, the complexes reported herein are water soluble (generally greater than 0.5 M at 23 degrees C).     

Addition of Bis(trimethylsiloxy)phosphine to Indene

Russian Journal of General Chemistry -     

Bis(2,2'-biphenoxy)borates for electrochemical double-layer capacitor electrolytes

Fluorine makes the difference! Bis(2,2'-biphenoxy)borates decorated with fluorine substituents have been synthesized and studied in supercapacitor test cells (see scheme). A clear trend towards higher electrochemical stability with the increase of the fluorine content has been observed. For a maximum performance, only two fluorine substituents per benzene moiety are required.     

Spacer flexibility in bis(pyridyl) ligands: chelating organosilicon pyridylethynyl ligands

Two new bis(pyridylethynyl) ligands with organosilicon spacers have been synthesized. The ligands react readily with silver(I) to form crystalline complexes, both of which are revealed to be triflate-bridged dimers by X-ray crystallographic analysis. The complex with the flexible siloxane-based ligand possesses considerably less bond angle distortion.     

A new family of bis-tetrazole (BIZOL) BINOL-type ligands

The synthesis and characterization of 5-(1-(2-(1H-tetrazole-5-yloxy)naphthalen-1-yl)naphthalen-2-yloxy)-1H-tetrazole (BIZOL) as the first bis-tetrazole BINOL-type ligands is described.     

Bis(phosphine imide)s: easily tunable organic electron donors

[graph: see text] The electrochemical, structural, and spectroscopic properties of bis(phosphine imide)s have been investigated. p-Phenylenebis(phosphine imide)s Ar3PNC6H4NPAr3 (1a-d) have two reversible single-electron oxidations. The first oxidation potentials can be varied from -0.05 to 0.15 V (versus SCE) by modification of the substituents on phosphorus (Ar). Electron-donating substituents lower the oxidation potential, while electron-withdrawing substituents increase the oxidation potential. The difference between the first and second oxidation potential (deltaE, 0.41-0.50) and the electronic coupling (Hab, 1.1 eV) are similar for 1a-d. Computational (DFT) and UV-visible-NIR spectroscopic investigations of 1a-d suggest that the first oxidation leads to a delocalized radical cation 1a*+ while the second oxidation leads to a quinonoidal dicationic state 1a2+. The aromatic linker between phosphine imides has also been modified. Upon oxidation, N,N'-4,4'-biphenylene(bis(triphenyl)phosphine imide) (3) forms radical cationic and a dicationic species similar to 1a-d. While deltaE (0.18 V) and Hab (0.63 eV) are smaller, suggesting weaker electronic communication between the two P=N units in the radical cationic state, the presence of NIR absorptions with vibrational fine structure (768, 861, and 983 nm) supports the formation of delocalized radical cation for 3*+.     

A new family of platinum(II) complexes incorporating five‐ and six‐membered cyclic phosphine ligands

New platinum complexes of the type cis‐Pt(L)₂Cl₂ have been synthesized from five‐ and six‐membered cyclic phosphines, which were prepared after deoxygenating a series of phosphine oxides (3‐phospholene oxides, phospholane oxides, a 1,4‐dihydrophosphinine oxide, and a 1,2,3,6‐tetrahydrophosphinine oxide). The complexes were characterized by NMR and mass spectral data, and their stereostructures were elucidated by B3LYP/6‐31G(d)‐LANL2DZ ECP calculations. The phosphine intermediates were characterized as the corresponding phosphine‐boranes. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:63–70, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20579     

XPS of coordination compounds: additive ligand effect in some copper(I) and copper(II) chelates with 1,2 phosphino (or phosphine/oxide)-sulfido ethane ligands

XPS spectra of Ph₂P-CH₂-CH₂-S-R ligands, of their P-oxides and of the corresponding 1: 2 complexes with Cu(I) and Cu(II) indicate a moderate donor shift on complexation of about 0.4 eV for S, and 0.3 eV for P on the 2p signals, and confirm complete chelation for both ligands in their metal complexes. The chemical shifts of Cu2P_{$\text{3}\text{2}$} b.e. values can be quantitatively described by a model of additive ligand contribution, for which parameter values of -0.2 eV for -S-, and -0.5+-0.6 eV for -0^? donors are proposed.     

Reaction of Bis(trimethylsiloxy)phosphine with Methyl(phenyl)divinylsilane

Russian Journal of General Chemistry -     

Copper(I) complexes with bipyridyl and phosphine ligands: a systematic study

Phosphorescent copper(I) complexes carrying 2,2'-bipyridyl derivatives and phosphine ligands have been prepared and fully characterised. The role of the bipyridyl as well as the phosphine ligands in defining the optical, as well as the chemical properties of the complexes, are discussed. The light emission of these complexes is investigated as a function of the molecular geometry: rigid complexes with restricted freedom to rearrange in the excited state are found to show a quantum yield of phosphorescence one order of magnitude higher than those complexes with no steric constraint. The complexes have been extruded in a polymer matrix as a proof of principle of their processability.