A simple method to selectively scale down the self-interaction correction

The method of Perdew and Zunger is commonly used to correct the self-interaction error of approximate density functionals. However, it has been shown that this orbital-based self-interaction correction (SIC) tends to overcorrect and often impairs molecular properties. We have recently proposed a method to improve the performance of the SIC by scaling it down in many-electron regions. In this communication, we present a simplification of this scheme. For every occupied orbital, we introduce a scaling factor determined by the ratio of the orbital density to the total spin-density. Thus, the magnitude of the correction is adjusted depending on how much orbital densities overlap with one another. Such a modification of the Perdew-Zunger SIC does not add any appreciable time to the computation, but significantly improves the accuracy for a number of benchmark properties.     

Effect of self-interaction error in the evaluation of the bond length alternation in trans-polyacetylene using density-functional theory

The calculation of the bond-length alternation (BLA) in trans-polyacetylene has been chosen as benchmark to emphasize the effect of the self-interaction error within density-functional theory (DFT). In particular, the BLA of increasingly long acetylene oligomers has been computed using the M?ller-Plesset wave-function method truncated at the second order and several DFT models. While local-density approximation (LDA) or generalized gradient corrected (GGA) functionals strongly underestimate the BLA, approaches including self-interaction corrections (SIC) provide significant improvements. Indeed, the simple averaged-density SIC scheme (ADSIC), recently proposed by Legrand et al. [J. Phys. B 35, 1115 (2002)], provides better results for the structure of large oligomers than the more complex approach of Krieger et al. [Phys. Rev. A 45, 101 (1992)]. The ADSIC method is particularly promising since both the exchange-correlation energy and potential are improved with respect to standard LDA/GGA using a physically appealing correction, through a different route than the more popular approach through the Hartree-Fock exchange inclusion within the hybrid functionals.     

Density functionals that are one- and two- are not always many-electron self-interaction-free, as shown for H2+, He2+, LiH+, and Ne2+

The common density functionals for the exchange-correlation energy make serious self-interaction errors in the molecular dissociation limit when real or spurious noninteger electron numbers N are found on the dissociation products. An "M-electron self-interaction-free" functional for positive integer M is one that produces a realistic linear variation of total energy with N in the range of M-12. Thus all these SIC's produce an exact binding energy curve for H2+, and an accurate one for He2+, but only the unscaled Perdew-Zunger SIC produces an accurate one for Ne2+, where there are more than two electrons on each fragment Ne+0.5. We also discuss LiH+, which is relatively free from self-interaction errors. We suggest that the ability of the original and unscaled Perdew-Zunger SIC to be nearly M-electron self-interaction-free for atoms of all M stems in part from its formal resemblance to the Hartree-Fock theory, with which it shares a sum rule on the exchange-correlation hole of an open system.     

Exchange coupling constants using Density Functional Theory: long-range corrected functionals

The presence of the self-interaction error in common exchange correlation functionals is one of the main drawbacks of calculations using methods based on Density Functional Theory. The recently developed asymptotically corrected functionals are an alternative way to solve the erroneous asymptotic behavior that may be at the origin of this error. Some of these functionals have been tested in the calculation of the exchange coupling constants of a number of transition metal dinuclear complexes. Correction of the self-interaction error is especially important for calculations of this kind. This error leads to the inclusion of some static correlation terms that overestimate the J values. This study shows that some of the long-range corrected functionals tested give promising results.     

Exchange parameters from approximate self-interaction correction scheme

The approximate atomic self-interaction correction (ASIC) method to density functional theory is put to the test by calculating the exchange interaction for a number of prototypical materials, critical to local exchange and correlation functionals. ASIC total energy calculations are mapped onto a Heisenberg pairwise interaction and the exchange constants J are compared to those obtained with other methods. In general the ASIC scheme drastically improves the band structure, which for almost all the cases investigated resemble closely available photoemission data. In contrast the results for the exchange parameters are less satisfactory. Although ASIC performs reasonably well for systems where the magnetism originates from half-filled bands, it suffers from similar problems than those of local density approximation for other situations. In particular, the exchange constants are still overestimated. This reflects a subtle interplay between exchange and correlation energy, not captured by the ASIC.     

Toward the complete range separation of non‐hybrid exchange–correlation functional

In this study, we use a very simple scheme to achieve range separation of a total exchange–correlation functional. We have utilized this methodology to combine a short‐range pure density functional theory (DFT) functional with a corresponding long‐range pure DFT, leading to a “Range‐separated eXchange–Correlation” (RXC) scheme. By examining the performance of a range of standard exchange–correlation functionals for prototypical short‐ and long‐range properties, we have chosen B‐LYP as the short‐range functional and PBE‐B95 as the long‐range counterpart. The results of our testing using a more diverse range of data sets show that, for properties that we deem to be short‐range in nature, the performance of this prescribed RXC‐DFT protocol does resemble that of B‐LYP in most cases, and vice versa. Thus, this RXC‐DFT protocol already provides meaningful numerical results. Furthermore, we envisage that the general RXC scheme can be easily implemented in computational chemistry software packages. This study paves a way for further refinement of such a range‐separation technique for the development of better performing DFT procedures. © 2015 Wiley Periodicals, Inc.     

Simple tests for density functional methods

The performance of the currently used generalized gradient approximation density functionals is analyzed using several simple, yet critical requirements. We analyze the effects of the self-interaction error, the inclusion of the exact exchange, and the parameter settings used in the popular three-parameter hybrid density functionals. The results show that the elimination of the self-interaction error from the current density functionals lead to very poor results for H₂. The inclusion of the exact exchange does not significantly influence the self-interaction corrected results. The variation of the A, B, and C parameters of a hybrid DFT method influences the H(SINGLE BOND)H equilibrium bond length through a very simple linear equation, and it is possible to reproduce the experimental H(SINGLE BOND)H distance with appropriate selection of these parameters, although an infinite number of solutions exists. Similar results were obtained for the total energy and the electron density along the internuclear axis. The analysis of the exact KS potential at the bond critical point of the dissociating H₂ molecule shows that, for this property, the second order Moller–Plesset perturbation theory yields a better potential than the density functionals studied in this article. © 1997 John Wiley & Sons, Inc. J Comput Chem 18 : 1534–1545, 1997     

香豆素衍生物的荧光发射能计算及XC泛函的合理选择

采用含时密度泛函理论(TDDFT)与单激发组态相互作用(CIS)处理相结合的计算方案对香豆素系列15种已知荧光化合物的发射能进行了系统考察. 结果表明, 发射能与吸收能一样, 其计算值主要取决于交换-相关(XC)泛函的选择. 只要泛函选用得当, 在使用较小基组的TDDFT/6-31G(d)//CIS/3-21G(d)理论水平上即可使绝大部分化合物的实验发射能在精度达0.16 eV以内得以重现. 与吸收能计算不同的是, 无法选用单一的一种泛函来对全系列化合物的发射能作出满意的理论预测. 激发态无明显电荷转移的、7位上有氨(或胺)基取代或有氮原子相连的化合物, 其适用泛函为不含Hartree-Fock(HF)交换能的纯泛函OLYP和BLYP. 而激发态发生较大程度电荷转移的、3 位上有共轭取代基的衍生物, 其适用泛函则为含20%的HF交换成分的混合泛函B3LYP. 因此, 发射能计算中的XC泛函选择, 应同时考虑取代基团效应以及激发态的电子结构特征. 其中, 发射能计算值受XC泛函中HF交换能比例的影响十分敏感. 文中还对激发能计算中的溶剂效应校正方案和激发态几何优化精度的影响进行了讨论.     

Proper Choice of XC Functionals and Calculations of Fluorescence-Emitting Energies for Coumarin Derivatives

A scheme of time-dependent density functional theory (TDDFT) combined with single-excitation configuration interaction (CIS) approach was employed to make a detailed investigation of the emitting energy for fifteen well-known coumarin derivatives. The results showed that the predicted emitting energies as well as the absorption ones were dominated mainly by the exchange-correlation (XC) functional to be used. So long as a functional is properly chosen, the experimental emitting energy of most derivatives can be accurately reproduced within 0.16 eV by a calculation at the TDDFT/6-31G(d)//CIS/3-21G(d) theoretical level. It was found that, nevertheless, the hybrid functional, B3LYP, well predicted the absorption energies for all the fifteen coumarin derivatives but none of the functionals could work equally well for the emitting energy calculations. Two pure functionals, OLYP and BLYP, yield good emitting energies for the 7-aminocoumarins or derivatives with a N atom connected to 7-position, which exhibit inconspicuous charge transfer (CT) in their excited states, whereas the B3LYP hybrid functional, with 20% Hartree-Fock (HF) exchange energy, performs significantly better than OLYP and BLYP for those 3-substituted coumarins with larger CT in excited states. Thus, in comparison with the absorption energies, the selection of proper functionals for the emitting energy calculations becomes more complex. In all probability, it is effective and doable to choose an XC-functional with alterable fraction of HF exchange energy according to the composition and structure characteristics of molecule.     

Energy landscapes of nucleophilic substitution reactions: a comparison of density functional theory and coupled cluster methods

We have carried out a detailed evaluation of the performance of all classes of density functional theory (DFT) for describing the potential energy surface (PES) of a wide range of nucleophilic substitution (SN2) reactions involving, amongst others, nucleophilic attack at carbon, nitrogen, silicon, and sulfur. In particular, we investigate the ability of the local density approximation (LDA), generalized gradient approximation (GGA), meta-GGA as well as hybrid DFT to reproduce high-level coupled cluster (CCSD(T)) benchmarks that are close to the basis set limit. The most accurate GGA, meta-GGA, and hybrid functionals yield mean absolute deviations of about 2 kcal/mol relative to the coupled cluster data, for reactant complexation, central barriers, overall barriers as well as reaction energies. For the three nonlocal DFT classes, the best functionals are found to be OPBE (GGA), OLAP3 (meta-GGA), and mPBE0KCIS (hybrid DFT). The popular B3LYP functional is not bad but performs significantly worse than the best GGA functionals. Furthermore, we have compared the geometries from several density functionals with the reference CCSD(T) data. The same GGA functionals that perform best for the energies (OPBE, OLYP), also perform best for the geometries with average absolute deviations in bond lengths of 0.06 A and 0.6 degrees, even better than the best meta-GGA and hybrid functionals. In view of the reduced computational effort of GGAs with respect to meta-GGAs and hybrid functionals, let alone coupled cluster, we recommend the use of accurate GGAs such as OPBE or OLYP for the study of SN2 reactions.     

Effect of the Perdew-Zunger self-interaction correction on the thermochemical performance of approximate density functionals

The Perdew-Zunger self-interaction-corrected density functional theory (SIC-DFT) was implemented self-consistently using a quasi-Newton direct minimization method. We calculated SIC-DFT energies for a number of atoms and molecules using various approximate density functionals, including hybrids. Self-interaction errors (SIE) of these functionals were compared and analyzed in terms of contributions from valence and core orbitals. We also calculated enthalpies of formation of the standard G2-1 set of 55 molecules and found that self-interaction-correction (SIC) improves agreement with experiment only for the LSDA functional, while all other functionals show worse performance upon introducing SIC. This is the first systematic study of the effect of SIC on thermochemical properties. We found no direct connection between the magnitude of the SIE contained in a functional and its performance for thermochemistry. Approximate functionals with large self-interaction errors can accurately reproduce enthalpies of formation. Our results do not support the popular belief that a smaller SIE of hybrid functionals is the main reason for their higher accuracy.     

Description of core excitations by time-dependent density functional theory with local density approximation, generalized gradient approximation, meta-generalized gradient approximation, and hybrid functionals

Time-dependent density functional theory (TDDFT) is employed to investigate exchange-correlation-functional dependence of the vertical core-excitation energies of several molecules including H, C, N, O, and F atoms. For the local density approximation (LDA), generalized gradient approximation (GGA), and meta-GGA, the calculated X1s-->pi* excitation energies (X = C, N, O, and F) are severely underestimated by more than 13 eV. On the other hand, time-dependent Hartree-Fock (TDHF) overestimates the excitation energies by more than 6 eV. The hybrid functionals perform better than pure TDDFT because HF exchange remedies the underestimation of pure TDDFT. Among these hybrid functionals, the Becke-Half-and-Half-Lee-Yang-Parr (BHHLYP) functional including 50% HF exchange provides the smallest error for core excitations. We have also discovered the systematic trend that the deviations of TDHF and TDDFT with the LDA, GGA, and meta-GGA functionals show a strong atom-dependence. Namely, their deviations become larger for heavier atoms, while the hybrid functionals are significantly less atom-dependent.     

Fluctuation-dissipation theorem density-functional theory

Using the fluctuation-dissipation theorem (FDT) in the context of density-functional theory (DFT), one can derive an exact expression for the ground-state correlation energy in terms of the frequency-dependent density response function. When combined with time-dependent density-functional theory, a new class of density functionals results that use approximations to the exchange-correlation kernel fxc as input. This FDT-DFT scheme holds promise to solve two of the most distressing problems of conventional Kohn-Sham DFT: (i) It leads to correlation energy functionals compatible with exact exchange, and (ii) it naturally includes dispersion. The price is a moderately expensive O(N6) scaling of computational cost and a slower basis set convergence. These general features of FDT-DFT have all been recognized previously. In this paper, we present the first benchmark results for a set of molecules using FDT-DFT beyond the random-phase approximation (RPA)-that is, the first such results with fxc not equal to 0. We show that kernels derived from the adiabatic local-density approximation and other semilocal functionals suffer from an "ultraviolet catastrophe," producing a pair density that diverges at small interparticle distance. Nevertheless, dispersion interactions can be treated accurately if hybrid functionals are employed, as is demonstrated for He2 and HeNe. We outline constraints that future approximations to fxc should satisfy and discuss the prospects of FDT-DFT.     

Does the gradient-regulated connection improve the description of correlated metal bond properties?

Gradient-regulated connection (GRAC) is a generalized gradient approximation exchange density functional designed by combining the revPBE and PW91 exchange functionals to impose their behaviors in the slowly- and fast-varying density regions, respectively. Such a construction allows one single density functional to accurately estimate both covalent and weak interactions occurring in main-group-based molecular systems. For the first time, the assessment of the performance of the GRAC exchange functional is extended to the modeling of various metal bond energy and structure properties. This assessment shows that when GRAC is coupled with the Perdew, Burke, Ernzerhof (PBE) correlation, the resulting exchange-correlation density functional is an excellent alternative to global hybrids to model bond dissociation energy, atomic electronic excitation energy, and bond length structure properties of single-reference metal bonds. It also shows that coupling with the Tognetti, Cortona, Adamo (TCA) correlation constitutes a robust approach to tackle energy bond properties of organometallic complexes with multi-reference character.     

Prescription for the design and selection of density functional approximations: more constraint satisfaction with fewer fits

We present the case for the nonempirical construction of density functional approximations for the exchange-correlation energy by the traditional method of "constraint satisfaction" without fitting to data sets, and present evidence that this approach has been successful on the first three rungs of "Jacob's ladder" of density functional approximations [local spin-density approximation (LSD), generalized gradient approximation (GGA), and meta-GGA]. We expect that this approach will also prove successful on the fourth and fifth rungs (hyper-GGA or hybrid and generalized random-phase approximation). In particular, we argue for the theoretical and practical importance of recovering the correct uniform density limit, which many semiempirical functionals fail to do. Among the beyond-LSD functionals now available to users, we recommend the nonempirical Perdew-Burke-Ernzerhof (PBE) GGA and the nonempirical Tao-Perdew-Staroverov-Scuseria (TPSS) meta-GGA, and their one-parameter hybrids with exact exchange. TPSS improvement over PBE is dramatic for atomization energies of molecules and surface energies of solids, and small or moderate for other properties. TPSS is now or soon will be available in standard codes such as GAUSSIAN, TURBOMOLE, NWCHEM, ADF, WIEN, VASP, etc. We also discuss old and new ideas to eliminate the self-interaction error that plagues the functionals on the first three rungs of the ladder, bring up other related issues, and close with a list of "do's and don't's" for software developers and users.     

A long-range-corrected time-dependent density functional theory

We apply the long-range correction (LC) scheme for exchange functionals of density functional theory to time-dependent density functional theory (TDDFT) and examine its efficiency in dealing with the serious problems of TDDFT, i.e., the underestimations of Rydberg excitation energies, oscillator strengths, and charge-transfer excitation energies. By calculating vertical excitation energies of typical molecules, it was found that LC-TDDFT gives accurate excitation energies, within an error of 0.5 eV, and reasonable oscillator strengths, while TDDFT employing a pure functional provides 1.5 eV lower excitation energies and two orders of magnitude lower oscillator strengths for the Rydberg excitations. It was also found that LC-TDDFT clearly reproduces the correct asymptotic behavior of the charge-transfer excitation energy of ethylene-tetrafluoroethylene dimer for the long intramolecular distance, unlike a conventional far-nucleus asymptotic correction scheme. It is, therefore, presumed that poor TDDFT results for pure functionals may be due to their lack of a long-range orbital-orbital interaction.