The influence of the supramolecular structure of water on the kinetics of vaporization

The kinetics of water vaporization was studied gravimetrically using a Q-1500 D derivatograph with an accuracy of ±5 × 10^?5 g under atmospheric conditions. Various supramolecular structures were created in liquid water using solutions of K, Na, Ba, and Zn chlorides with various concentrations. The kinetic dependences of weight P loss caused by the vaporization of solutions were compared with the data on pure water used to prepare the solutions. The dependence of the rate of vaporization V on the concentration of hydrated ions in solutions was used to show that the rate V is the sum of the rates of vaporization of particles of two types, (a) H₂O molecules and (b) supramolecular formations (H₂O clusters) with H-bonds. As a consequence, a nonlinear (piecewise linear) dependence of the kinetics of vaporization P = f(τ) of water and solutions is observed. The rate of vaporization (V ₁) along the initial P = f(τ) curve portions is substantially (by ～30%) higher than its stationary value (V).     

Formation of linear supramolecular polymers that is based on host-guest assembly in water

Cucurbit[n]urils (n = 7, 8) and thiazole orange (TO) dyes in aqueous media were found to form host-guest inclusions in different stoichiometries. Supramolecular structures and linear supramolecular polymers were observed through the hydrophobic effect and π-π interactions in aqueous solution.     

Melamine driven supramolecular self‐assembly of nucleobase derivatives in water

Water‐soluble supramolecular polymers, especially made up of biomolecules, are ideally suited to build new biomaterials that can mimic or interact with dynamic, biological environments. Here, two derivatives from thymine (T), that is N‐[2‐(3,4‐Dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidinyl)acetyl]‐L‐phenylalanine (T‐phe) and N‐(2‐Aminoethyl)‐3,4‐dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidineacetamide (T‐NH₂) were synthesized. Then the optimal condition for self‐assembly of T‐phe and T‐NH₂ driven by melamine (M) was explored. It was observed that M/T kept at 1:3 with equivalent T‐phe and T‐NH₂ under neutral environment resulted in long fibers (>1 μm) with extremely high aspect ratios, which suggested that electrostatic and π‐stacking interactions could be effectively orchestrated by hydrogen bonds to direct the hierarchical assembly. Furthermore, hydrogels were spontaneously generated with a concentrated solution of T‐phe, T‐NH₂, and M due to the fibril entanglement. Given its biomimetic nature and efficient self‐assembly process, this newly developed supramolecular polymer stacked by tetrameric structures represented an innovative concept and pathway for novel bio‐inspired materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 789–796     

Interfacial assembly of cinnamoyl-terminated bolaamphiphiles through the air/water interface: headgroup-dependent assembly, supramolecular nanotube and photochemical sewing

A series of cinnamoyl-terminated bolaamphiphiles were synthesized and their assemblies at the air/water interface were investigated. It was found that the assembly behaviour depended on the substituted groups on the cinnamoyl unit. The bolaamphiphile with 4-hydroxycinnamoyl head groups (HCDA) was found to assemble into a supramolecular nanotube, while the others formed only layer-structured films. Moreover, the nanotube formed from HCDA showed supramolecular chirality due to the symmetry breaking. Both the layered films and the nanotubes showed photochemical dimerization upon UV irradiation, which were studied from the UV-Vis, FT-IR spectral and MALDI-TOF MS analysis. Interestingly, such dimerization behavior of the cinnamoyl group could be used to stabilize the nanotube of HCDAvia photochemical sewing. During such a process both the supramolecular chirality and the tubular shapes were kept. Remarkably, such a photochemical sewed chiral nanotube could further induce the chirality of an achiral porphyrin derivative assembled on it, and produced the induced chirality without using any chiral molecules.     

pH-dependent assembly of Keggin-based supramolecular architecture

Three Keggin-based supramolecular architectures were synthesized on the basis of same molecular building units, showing that the pH value of the reaction plays a crucial role in controlling the topological structures of the supramolecular architectures.     

Formation of supramolecular isomers; poly[2]rotaxane and supramolecular assembly

Poly[2]rotaxane and supramolecular assembly have been prepared by modified cyclodextrins bearing an adamantyl group in an aqueous medium.     

Liposome-templated supramolecular assembly of responsive alginate nanogels

Nanosized gel particles (nanogels) are of interest for a variety of applications, including drug delivery and single-molecule encapsulation. Here, we employ the cores of nanoscale liposomes as reaction vessels to template the assembly of calcium alginate nanogels. For our experiments, a liposome formulation with a high bilayer melting temperature (Tm) is selected, and sodium alginate is encapsulated in the liposomal core. The liposomes are then placed in an aqueous buffer containing calcium chloride, and the temperature is raised up to Tm. This allows permeation of Ca2+ ions through the bilayer and into the core, whereupon these ions gel the encapsulated alginate. Subsequently, the lipid bilayer covering the gelled core is removed by the addition of a detergent. The resulting alginate nanogels have a size distribution consistent with that of the template liposomes (ca. 120-200 nm), as confirmed by transmission electron microscopy and light scattering. Nanogels of different average sizes can be synthesized by varying the template dimensions, and the gel size can be further tuned after synthesis by the addition of monovalent salt to the solution.     

Coadsorption-induced reconstruction of supramolecular assembly characteristics.

A host supramolecular structure consisting of bis-(2,2':6',2"-terpyridine)-4'-oxyhexadecane (BT-O-C16) is shown to respond to coadsorbed molecules in dramatic ways, as observed by scanning tunneling microscopy (STM) on a highly oriented pyrolytic graphite (HOPG) surface under ambient conditions. Interestingly, the lattice parameter of the triphenylene-filled complex differs significantly from that of the coronene-filled one, although the triphenylene and coronene molecules are nearly the same size. The STM study and density functional theory calculations reveal that intermolecular hydrogen-bond interactions play an essential role in forming the assembly structures. The different electronic properties of coronene and triphenylene molecules are responsible for the difference in lattice parameters and consequently for the difference in filling behaviors in the coronene/BT-O-C16 and triphenylene/BT-O-C16 binary systems.     

Coordinative supramolecular assembly of electrochromic thin films

The article is concerned with the layer-by-layer (LbL) assembly of electrochromic films using coordinative interactions between compounds. At first the concepts of coordinative supramolecular assembly are explained and examples are presented. Subsequently electrochromic LbL assemblies prepared upon electrostatic and/or coordinative interactions are briefly discussed. In the focus of the article are films of terpyridine(tpy)-functionalized polyiminoarylene metal ion complexes, which are prepared upon coordinative LbL assembly of the tpy-substituted polyiminoarylenes and metal ions. The films exhibit reversible electrochromic behavior with high contrast and fast response times. It is demonstrated that the electrochromic behavior of the films can be modified by a variation of polymer structure, metal ions, and counterions.     

Diffusion of a highly charged supramolecular assembly: direct observation of ion association in water

The diffusion coefficient of the self-assembled supramolecular cluster [Ga4L6]12- depends on the cationic counterions in solution. Diffusion coefficients were determined using the pulsed-gradient spin-echo 1H NMR method and fit using nonlinear least-squares refinement. Saturation studies revealed a small number of ion-association sites on the exterior of the assembly and the direct observation of ion association in water. The addition of excess alkali-metal cations displaces the ion-associated hydrophobic tetra-alkyl-ammonium cations. Comparisons between tetraethyl- and tetra-propyl-ammonium show a preference for ion association with the more hydrophobic cation.     

Role of the supramolecular structure of the reactants in the kinetics of the liquid-phase synthesis and decomposition of explosives

Formulas relating the observed rate constant of the initial reaction step (k _ef) to the rate constants of the elementary steps (k _i ), to the monomer-association species equilibrium constants (K _i ), and to the concentrations of the reactants (A _i ) and solvent have been obtained for a number of simple kinetic models of liquid-phase explosive material synthesis and decomposition reactions involving associating reactants. The k _ef = F(k _i , K _i , and A _i ) relationship is independent of the rate law of the reaction and is governed by the association species type (autoassociation or heteroassociation species) and by the number of association species kinds. In the case of parallel reactions involving association species, as distinct from the same reactions involving unassociated reactants, concentration variations have an effect on the ratio of the rates of the parallel steps and on the product yield ratio. By varying the reaction temperature, it is possible to make the rates of the parallel steps to vary in opposite ways. When monomers, dimers, and tetramers are present in the reaction mixture, the temperature dependence of lnk _ef may have an extremum. These deduced regularities are in qualitative agreement with experimental data.     

Two-component dendritic gel: effect of stereochemistry on the supramolecular chiral assembly

The self-assembly of diaminododecane solubilised by four different stereoisomeric dendritic peptides to form gel-phase materials in toluene was investigated. The second generation dendritic peptides were based on D- and L-lysine building blocks, and each contained three chiral centres. By designing dendritic peptides in which the configurations of the chiral centres were modified, and applying them as gelator units, the assembly of stereoisomers could be investigated. In all cases, the self-assembly of gelator units resulted in macroscopic gelation. However, the degree of structuring was modulated by the stereoisomers employed, an effect which changed the morphology and macroscopic behavior of the self-assembled state. Enantiomeric (L,L,L or D,D,D) gelator units formed fibrous molecular assemblies, whilst the racemic gel (50 % L,L,L : 50 % D,D,D) formed a flat structure with a "woven" appearance. Gelator units based on L,D,D or D,L,L dendritic peptides also formed fibrous assemblies, but small-angle X-ray scattering indicated significant morphological differences were caused by the switch in chirality. Furthermore, the macroscopic stability of the gel was diminished when these peptides were compared with their L,L,L or D,D,D analogues. In this paper it is clearly shown that individual stereocentres, on the molecular level, are directly related to the helicity within the fibre. It is argued that the chirality controls the pattern of hydrogen bonding within the assembly, and hence determines the extent of fibre formation and the macroscopic gel strength.     

Nature of the liquid-crystalline phase in supramolecular linear polymers

The development of the liquid crystal (LC) state in the melt of a supramolecular linear LC polymer based on a diacid and bipyridine base has been studied by IR spectroscopy and polarizing optical microscopy. Relying on experiments on the hydrogen-bonded complex formation and statistical analysis of the formation kinetics of the nematic phase, it is inferred that the system under study behaves like a binary mixture of weakly interacting components rather than a polydisperse polymer.     

Directed supramolecular surface assembly of SNAP-tag fusion proteins

Supramolecular assembly of proteins on surfaces and vesicles was investigated by site-selective incorporation of a supramolecular guest element on proteins. Fluorescent proteins were site-selectively labeled with bisadamantane by SNAP-tag technology. The assembly of the bisadamantane functionalized SNAP-fusion proteins on cyclodextrin-coated surfaces yielded stable monolayers. The binding of the fusion proteins is specific and occurs with an affinity in the order of 10(6) M(-1) as determined by surface plasmon resonance. Reversible micropatterns of the fusion proteins on micropatterned cyclodextrin surfaces were visualized by using fluorescence microscopy. Furthermore, the guest-functionalized proteins could be assembled out of solution specifically onto the surface of cyclodextrin vesicles. The SNAP-tag labeling of proteins thus allows for assembly of modified proteins through a host-guest interaction on different surfaces. This provides a new strategy in fabricating protein patterns on surfaces and takes advantage of the high labeling efficiency of the SNAP-tag with designed supramolecular elements.     

Two-photon absorption of a supramolecular pseudoisocyanine J-aggregate assembly

Linear spectral properties, including excitation anisotropy, of pseudoisocyanine or 1,1′-diethyl-2,2′-cyanine iodide (PIC) J-aggregates in aqueous solutions with J-band position at 573 nm were investigated. Two-photon absorption of PIC J-aggregates and monomer molecules was studied using an open aperture Z-scan technique. A strong enhancement of the two-photon absorption cross-section of PIC in the supramolecular J-aggregate assembly was observed in aqueous solution. This enhancement is attributed to a strong coupling of the molecular transition dipoles. No two-photon absorption at the peak of the J-band was detected.     

A non-covalent strategy for the assembly of supramolecular photocurrent-generating systems

Three photocurrent-generating thin films were assembled on gold surfaces. SAM I was constructed from molecules consisting of an alkyl disulfide group linked covalently to a 12-residue helical peptide and terminated with an alanine residue containing a pyrene chromophore. SAM I served as a benchmark for multilayered films II and III in photocurrent generation experiments. Films II and III were assembled from several components that were linked noncovalently by metal-ligand complexation. Cyclic voltammetry and contact angle measurements suggest that the films consist of ordered layers with relatively few defects. Photoexcitation of SAM I by the output of a 350 nm lamp ( approximately 0.2 mW power incident on the sample) results in current generation in the range 5-10 nA/cm2. Photoexcitation of II and III yields higher current in the range 10-30 nA/cm2, representing a quantum efficiency of approximately 1%. The observation of comparable or higher current from noncovalently assembled multicomponent films indicates that this method of assembly may obviate the problems associated with the covalent assembly of devices from large molecules.     

Substituent effects on the structure and supramolecular assembly of bis(dioxaborole)s

Solid-state and solution analysis shows that dialkyl substituents on the central phenyl ring of bis(dioxaborole)s, such as , do not have an appreciable effect on the planarity but do significantly alter the supramolecular assembly of these compounds.     

Specific ion and ph effects on supramolecular assembly of mesostructured V-Mg oxides

Mesostructured V-Mg oxides were synthesized using the surfactant cetyltrimethylammonium bromide (CTAB) as template, V2O5, V(acac)3 (vanadium acetylacetonate), or NH4VO3 as vanadium source, and Mg(NO3)2, MgCl2, MgSO4, (MgCO3)4.Mg(OH)2, Mg(CH3CO2)2, or Mg(C2H5O)2 as magnesium source. The factors that influence the formation of mesostructured V-Mg oxides, such as the pH, the natures of magnesium and vanadium sources, and the ionic strength, were identified. The formation of mesophases could be related to the presence of anionic vanadium species, to the electrostatic interactions between the oppositely charged vanadates and micellar headgroups, and to the nature of the counterion of Mg2+ in the magnesium source. The main role was played by the pH and only when the pH allowed the formation of vanadates was a mesostructure generated. The counterions of Mg2+ also played a role, which could be explained via specific ion effects and the formation of complexes between them and the vanadium-containing species, which are attracted by the headgroups of the micellar templates.