Metal induced enhancement of fluorescence and modulation of two-photon absorption cross-section with a donor-acceptor-acceptor-donor receptor

A metal ion sensing fluorophore L that exhibits a large two-photon absorption cross-section has been synthesized in good yields. The influences of different metal ion inputs, on the one- and two-photon spectroscopic properties of L, have been investigated. The ligand itself does not show any fluorescence although in presence of a metal ion like Zn(II), Cd(II), Mg(II) or Ca(II), a ∼25 time enhancement of fluorescence is observed. The ligand with symmetrical “donor-acceptor-acceptor-donor” characteristics exhibits a large two-photon absorption cross-section measured by femtosecond open-aperture Z-scan technique at 880 nm. However, presence of any of the above metal ions lowers its two-photon absorption cross-section (δ) to different extents at 880 nm. Theoretical calculation carried out in DFT formalism on the ligand and its Zn(II) complex corroborate experimental results.     

A Coumarin-Derived Fluorescence Chemosensors Selective for Copper(II)

Abstract

Two different coumarin derivatives have been connected via animine linkage to obtain a new fluorescence signaling system. The coumarin derivative (L) containing a C-N group was designed as an example for illustration. The free ligand L is almost nonfluorescent due to the isomerization of C-N double bond in the excited state. However, in the presence of a Cu(II) ion, this isomerization is stopped because of bonding to the metal ion, resulting in a high-intensity (400-fold) emission. In this way, we designed a new compound for copper-selective and ratiometric chemosensors.     

Probing the binding of Tb(III) and Eu(III) to the hammerhead ribozyme using luminescence spectroscopy

BACKGROUND: Divalent metal ions serve as structural as well as catalytic cofactors in the hammerhead ribozyme reaction. The natural cofactor in these reactions is Mg(II), but its spectroscopic silence makes it difficult to study. We previously showed that a single Tb(III) ion inhibits the hammerhead ribozyme by site-specific competition for a Mg(II) ion and therefore can be used as a spectroscopic probe for the Mg(II) it replaces. RESULTS: Lanthanide luminescence spectroscopy was used to study the coordination environment around Tb(III) and Eu(III) ions bound to the structurally well-characterized site on the hammerhead ribozyme. Sensitized emission and direct excitation experiments show that a single lanthanide ion binds to the ribozyme under these conditions and that three waters of hydration are displaced from the Tb(III) upon binding the RNA. Furthermore, we show that these techniques allow the comparison of binding affinities for a series of ions to this site. The binding affinities for ions at the G5 site correlates linearly with the function Z(2)/r of the aqua ion (where Z is the charge and r is the radius of the ion). CONCLUSIONS: This study compares the crystallographic nature of the G5 metal-binding site with solution measurements and gives a clearer picture of the coordination environment of this ion. These results provide one of the best characterized metal-binding sites from a ribozyme, so we use this information to compare the RNA site with that of typical metalloproteins.     

Metal ion complexing properties of dipyridoacridine, a highly preorganized tridentate homologue of 1,10-phenanthroline

DPA (dipyrido[4,3-b;5,6-b]acridine) may be considered as a tridentate homologue of phen (1,10-phenanthroline). In this paper some of the metal ion complexing properties of DPA in aqueous solution are reported. Using UV-visible spectroscopy to follow the intense π-π* transitions of DPA as a function of pH gave protonation constants at ionic strength (μ) = 0 and 25 °C of pK(1) = 4.57(3) and pK(2) = 2.90(3). Titration of 10(-5) M solutions of DPA with a variety of metal ions gave log K(1) values as follows: Zn(II), 7.9(1); Cd(II), 8.1(1); Pb(II), 8.3(1); La(III), 5.23(7); Gd(III), 5.7(1); Ca(II), 3.68; all at 25 °C and μ = 0. Log K(1) values at μ = 0.1 were obtained for Mg(II), 0.7(1); Sr(II), 2.20(1); Ba(II), 1.5(1). The log K(1) values show that the high level of preorganization of DPA leads to complexes 3 log units more stable than the corresponding terpyridyl complexes for large metal ions such as La(III) or Ca(II), but that for small metal ions such as Mg(II) and Zn(II) such stabilization is minimal. Molecular mechanics calculations (MM) are used to show that the best-fit M-N length for coordination with DPA is 2.60 ?, accounting for the high stability of Ca(II) or La(III) complexes of DPA, which are found to have close to this M-N bond length in their phen complexes.     

A fluorescence chemosensor based on peptidase for detecting nickel(II) with high selectivity and high sensitivity

We report herein a new class of metal ion chemosensors and give the first example of a metal-dependent peptidase chemosensor for metal ions. The chemosensor contains the basic specific Ni(II)-dependent peptide bond hydrolysis sequence (Gly-Ala-Ser-Arg-His-Trp-Lys-Phe-Lys). The substrate was labeled with a fluorophore at the N-terminal and a quencher at the C-terminal Lys side chain. Initially, the MOCAc ((7-methoxycoumarin-4-yl)acetyl-) emission was quenched by the nearby quencher. In the presence of Ni(II), the substrate was irreversibly cleaved at the cleavage site, leading to a 20-fold increase in fluorescence intensity. The chemosensor combines the high selectivity of a peptidase (at least greater than tenfold for Ni(II) over other metal ions) with the high sensitivity of fluorescence detection limit of 50 nM and can be applied for the quantitative detection of Ni(II) over a concentration range of three orders of magnitude. Given this degree of selectivity and sensitivity, our molecular engineering design may prove useful in the future development of other peptidase-based probes for different metal ions in toxicological and environmental monitoring.     

Silica gel-immobilized Eriochrome black-T as a potential solid phase extractor for zinc (II) and magnesium (II) from calcium (II)

The immobilization of silica gel surface with Eriochrome black-T indicator (ERT) for the formation of silica-ERT phase is described. The surface coverage of silica gel, based on carbon and nitrogen analysis of the modified silica gel phase, is 0.38 mmol g(-1). The stability towards hydrolysis of silica-ERT phase in different buffer solutions (pH 1-10) is studied and evaluated. The applicability of silica-ERT as a solid phase extractor for Zn(II), Mg(II) and Ca(II) is studied by the batch equilibrium technique and found to show an order similar to the formation constant values of these three metal ions with the indicator. The selectivity of silica-ERT phase towards the extraction of a certain metal ion from a mixture containing only two metal ions is studied by the batch equilibrium technique and exhibited good discrimination orders for Zn(II) and Mg(II) in presence of Ca(II). The results of the column separation and preconcentration studies are consistent with the selectivity behaviour of silica-ERT phase, thus affording reasonable separation of the three studied metal ions.     

Structure and properties of a series of 2-cinnamoyl-1,3-indandiones and their metal complexes

A series of seven 2-cinnamoyl-1,3-indandiones and their metal(II) complexes were synthesized and characterized by means of spectroscopic (IR, NMR, electron absorption and emission spectroscopy) and/or single-crystal X-ray diffraction methods. The optical spectra of the organic compounds show very strong absorption in the visible region and weak fluorescence with moderate to strong Stokes shift. The effect of concentration, water addition and metal ion complexation on the optical properties was also studied. In search of potential practical application, the complexation of 2-cinnamoyl-1,3-indandiones with metal(II) ions was investigated. A series of non-charged complexes with Cu(II), Cd(II), Zn(II), Co(II) and Ni(II) was isolated and analyzed by elemental analyses and IR. Most of the complexes show presence of water molecules, most probably coordinated to the metal ion, thus forming octahedral geometry. For the paramagnetic Cu(II) complexes a distorted, flattened tetrahedral structure is proposed, basing on the EPR data. The optical properties of the metal complexes, however, do not differ appreciably from those of the free ligands.     

Attachment of an electron-withdrawing fluorophore to a cryptand for modulation of fluorescence signaling

The laterally nonsymmetric aza cryptand synthesized by condensing tris(2-aminoethyl)amine (tren) with tris[2-[(3-(oxomethyl)phenyl)oxy]ethyl]mine readily forms mononuclear inclusion complexes with both transition- and main-group-metal ions. The fluorophore 7-nitrobenz-2-oxa-1,3-diazole is attached to one of the secondary amines, to give an integrated fluorophore-receptor configuration. The fluorophoric system does not show any appreciable emission when excited due to an efficient photoinduced intramolecular electron transfer (PET) from the nitrogen lone pair. When a metal ion enters the cavity, the PET is blocked, causing recovery of fluorescence; Cd(II) gives the highest quantum yield. The fluorophore, with pi-accepting ability, drastically alters the binding property of the cryptand. With perchlorate or tetrafluoroborate salts of Cd(II), the metal ion enters the cavity, causing recovery of fluorescence. However, in the presence of coordinating ions such as Cl-, N3-, and SCN-, the metal ion comes out of the cavity, causing PET to take place once again, and the fluorescence is lost. Thus, translocation of Cd(II) between the inside and outside of the cryptand cavity can lead to a reversible fluorescence on/off situation.     

Metal ion-induced site-selective RNA hydrolysis by use of acridine-bearing oligonucleotide as cofactor

New types of noncovalent ribozyme-mimics for site-selective RNA scission are prepared by combining metal ions with oligonucleotides bearing an acridine. Lanthanide(III) ions and various divalent metal ions (Zn(II), Mn(II), Cu(II), Ni(II), Co(II), Mg(II), and Ca(II)) are employed without being bound to any sequence-recognizing moiety. The modified oligonucleotide forms a heteroduplex with the substrate RNA, and selectively activates the phosphodiester linkages in front of the acridine. As a result, these linkages are preferentially hydrolyzed over the others, even though the metal ions are not fixed anywhere. The scission is efficient under physiological conditions, irrespective of the sequence at the target site. Site-selective RNA scission is also successful with the combination of an oligonucleotide bearing an acridine at its terminus, another unmodified oligonucleotide, and the metal ion. In a proposed mechanism, the acridine pushes the unpaired ribonucleotide out of the heteroduplex and changes the conformation of RNA at the target site for the sequence-selective activation.     

Fluorescence emission control and switching of oxymethylcrowned spirobenzopyrans by metal ion

Oxymethylcrowned spirobenzopyran 1 and pyrenylspirobenzopyran 2 were synthesized, and fluorescence emission of their corresponding merocyanine form was examined in the presence of metal ions. For 2, fluorescence emission derived from the pyrene moiety was completely quenched by photoinduced electron transfer (PET) of the nitrogen atom when the merocyanine form was not produced, namely, without metal ions. However, when 2 was converted to the merocyanine form by the complexation of its crown ether with a metal ion, fluorescence resonance energy transfer (FRET) from the pyrene to the merocyanine moieties took place to produce fluorescence emission. This result demonstrates that the spirobenzopyran isomerization can function as a fluorescence emission switch. Fluorescence quantum yield measurement for 1 and 2 showed that fluorescence emission depends on the binding metal ion in which the fluorescence quantum yield generally increased with the increase of metal ion radius.     

Metal-dependent global folding and activity of the 8-17 DNAzyme studied by fluorescence resonance energy transfer

The 8-17 DNAzyme is a DNA metalloenzyme catalyzing RNA transesterification in the presence of divalent metal ions, with activity following the order Pb2+ > Zn2+ >Mg2+. Since the DNAzyme has been used as a metal ion sensor, its metal-induced global folding was studied by fluorescence resonance energy transfer (FRET) by labeling the three stems of the DNAzyme with the Cy3/Cy5 FRET pair two stems at a time in order to gain deeper insight into the role of different metal ions in its structure and function. FRET results indicated that, in the presence of Zn2+ and Mg2+, the DNAzyme folds into a compact structure, stem III approaching a configuration defined by stems I and II without changing the angle between stems I and II. Correlations between metal-induced folding and activity were also studied. For Zn2+ and Mg2+, the metal ion with higher affinity for the DNAzyme in global folding (Kd(Zn) = 52.6 microM and Kd(Mg) = 1.36 mM) also displays higher affinity in activity (Kd(Zn) = 1.15 mM and Kd(Mg) = 53 mM) under the same conditions. Global folding was saturated at much lower concentrations of Zn2+ and Mg2+ than the cleavage activities, indicating the global folding of the DNAzyme occurs before the cleavage activity for those metal ions. Surprisingly, no Pb2+-dependent global folding was observed. These results suggest that for Pb2+ global folding of the DNAzyme may not be a necessary step in its function, which may contribute to the DNAzyme having the highest activity in the presence of Pb2+.     

Catalytic reduction of NO to N2O by a designed heme copper center in myoglobin: implications for the role of metal ions

The effects of metal ions on the reduction of nitric oxide (NO) with a designed heme copper center in myoglobin (F43H/L29H sperm whale Mb, CuBMb) were investigated under reducing anaerobic conditions using UV-vis and EPR spectroscopic techniques as well as GC/MS. In the presence of Cu(I), catalytic reduction of NO to N2O by CuBMb was observed with turnover number of 2 mol NO.mol CuBMb-1.min-1, close to 3 mol NO.mol enzyme-1.min-1 reported for the ba3 oxidases from T. thermophilus. Formation of a His-heme-NO species was detected by UV-vis and EPR spectroscopy. In comparison to the EPR spectra of ferrous-CuBMb-NO in the absence of metal ions, the EPR spectra of ferrous-CuBMb-NO in the presence of Cu(I) showed less-resolved hyperfine splitting from the proximal histidine, probably due to weakening of the proximal His-heme bond. In the presence of Zn(II), formation of a five-coordinate ferrous-CuBMb-NO species, resulting from cleavage of the proximal heme Fe-His bond, was shown by UV-vis and EPR spectroscopic studies. The reduction of NO to N2O was not observed in the presence of Zn(II). Control experiments using wild-type myoglobin indicated no reduction of NO in the presence of either Cu(I) or Zn(II). These results suggest that both the identity and the oxidation state of the metal ion in the CuB center are important for NO reduction. A redox-active metal ion is required to deliver electrons, and a higher oxidation state is preferred to weaken the heme iron-proximal histidine toward a five-coordinate key intermediate in NO reduction.     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.     

Spectrophotometric estimation of cobalt(II) with nitrilotriacetic acid

A convenient and efficient method for the estimation of cobalt(II) ions in the presence of other metal ions is described. Interference of metal ions such as iron(II), iron(III), nickel(II), manganese(II), and copper(II) have been investigated. Only iron(III) ions seriously affect this determination. Copper(II) and nickel(II) ions do not interfere if present in a molar-ratio less than 1:2 in the cobalt(II) ion solution. Cobalt(II)-nickel(II) and cobalt(II)-copper(II) binary mixtures can be efficiently analyzed at selective wavelengths.     

A simple fluorescent receptor selective for Mg2+

A structurally simple fluorescent receptor (receptor 1) has been synthesized and was found to show a dramatic enhancement in its fluorescence emission upon complexation with Mg(2+). This was maybe contributed to by the inhibition of the C=N isomerization in the excited state. The experimental results show that the receptor was selective and sensitive towards Mg(2+) in the presence of competing ions, with a low detection limit of 3.5 × 10(-9) mol L(-1) (3σ).     

Voltammetric determination of mercury(II) at a carbon paste electrode in aqueous solutions containing tetraphenylborate ion

The determination of mercury(II) ions can be achieved by monitoring the decrease in the oxidation peak of the tetraphenylborate ion in the presence of this metal ion at a carbon paste electrode. The reaction between mercury(II) and the tetraphenylborate ion results in the formation of diphenylmercury, thus providing the method with good selectivity over other metal ions. Using anodic stripping voltammetry in a neutral electrolyte, a linear dependence of the decrease of peak height was observed on increasing the mercury(II) concentration in the range 1 x 10(-6)-8 x 10(-9)M mercury(II). Zinc(II), cadmium(II), lead(II), nickel(II), cobalt(II), tin(II), potassium(I) and ammonium(I) ions did not interfere at a 1000-fold concentration excess. Iron(III) and chromium(III) did not interfere at a 250-fold and 50-fold concentration excess, respectively. Following masking procedures, copper(II), bismuth(III) and silver(I) did not interfere at a 100-fold concentration excess. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

Thiacalix[4]arenetetrasulfonate as specific pre-column chelating reagent for nickel(II) ion in kinetic differentiation mode high-performance liquid chromatography

Thiacalix[4]arenetetrasulfonate (TCAS) has been examined as a pre-column chelating reagent for the determination of trace metal ions by kinetic differentiation mode (KD) ion-pair reversed-phase high-performance liquid chromatography (HPLC) with spectrophotometric detection. Among 14 kinds of common metal ions tested here, viz. Al(III), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V), and Zn(II) ion, only Ni(II) ion was detected as the TCAS chelate in the HPLC separation stage in spite of TCAS forming the chelates with various metal ions except for Al(III), Ca(II), and Mg(II) at the pre-column chelation stage. The undetected metal-TCAS chelates seemed to be dissociated on an HPLC column where no added TCAS was present in the mobile phase because of their kinetic unstability. The calibration graph for Ni(II) ion gave a wide linear dynamic range (40-20,000 nM) with the very low detection limit (DL) (3σ base-line fluctuation) to be 5.4 nM (0.32 ng ml⁻¹). The practical applicability of the KD-HPLC method with TCAS was demonstrated with the determination of trace Ni in coal fly ash.     

Fluorescent Au@Ag core-shell nanoparticles with controlled shell thickness and Hg(II) sensing

Au-Ag core-shell nanoparticles have been synthesized using synthetic fluorescent dipeptide β-Ala-Trp (β-Ala is β-alanine; Trp is l-tryptophan) in water at pH 6.94 and at room temperature. The synthesis of the Au-Ag core-shell nanomaterial does not involve any external reducing and stabilizing agents, and the constituents of dipeptide β-alanine and l-tryptophan are naturally occurring. Therefore, the synthesis procedure is ecofriendly. Moreover, the shell thickness has also been controlled, and the optical property of the core-shell nanomaterial varies with the shell thickness. The core-shell nanomaterial exhibits a fascinating fluorescence property. This fluorescent Au@Ag core-shell nanoparticle can detect toxic Hg(II) ions ultrasensitively (with a lower limit of detection of 9 nM) even in presence of Zn(II), Cd(II), and other bivalent metal ions (Ca(II), Mg(II), Ni(II), Mn(II), Ba(II), Sr(II), Pb(II), and Fe(II)). Au-Ag core-shell nanomaterials can also be reused for sensing Hg(II) ions.     

Separation and determination of some metal ions on new chelating resins containing N, N donor sets

Two new stable chelating resins have been synthesized incorporating the imidazolylazobenzene and 1,4-bis(imidazolylazo)benzene as functional group into Merrifield polymer through CN covalent bond and characterized by elemental analyses, IR and thermal study. A comparison of sorption capacity of newly formed resins towards the cations Ag(I), Cu(II), Zn(II), Cd(II), Hg(II) and Pb(II) as a function of pH has been studied. Kinetic studies show the time for the completeness of metal ion saturation with the resin phase. Cd(II) in trace quantities has been successfully separated and determined in different biological samples and Zn(II) in medicinal samples. It is also found that Cd(II) can be removed from water at usual pH of natural water. Both the resins can be employed for water purification as the resins reveal sorption ability towards toxic metal ions and exhibit no affinity to alkali or alkaline earth metal ions.     

Separation and analysis of aluminium(III) by cation exchange ion chromatography

A method for the determination of aluminium(III) ions based on separation by cation exchange column chromatography and detection by conductivity detector has been developed. It is fast and reliable, and can be used for the separation and analysis of aluminium(III) ions from other metal ions like Mg(II), Mn(II), Zn(II), Co(II), Ca(II), Sr(II), rare earth elements like Lu(III), Tm(III), and Gd(III), which are eluted at different times and so do not interfere. Effect of p-phenylene diamine concentration present in the eluent, presence of other metal ions and effect of various anions present in the injection sample on the separation and analysis of aluminium(III) ions have also been studied.