Controllable Fabrication of TiO2 1D‐Nano/Micro Structures: Solid,Hollow, and Tube‐in‐Tube Fibers by Electrospinning and the Photocatalytic Performance

The solid, hollow, and tube‐in‐tube porous nanofiber structures of TiO₂ are synthesized successfully by a simple non‐coaxial electrospinning method without using a complicated coaxial jet head, combined with adjusting the concentration of the TiO₂ precursor and the pinhole diameter of the jet head and by final calcination. The formation mechanisms of different structured TiO₂ fibers are discussed in detail. This method is facile and effective, and easy to scale up. Furthermore, it is a versatile method for constructing tube‐in‐tube fibers of other metal oxides such as ZrO₂, SiO₂, SnO₂, and In₂O₃. The photocatalytic activity of tubular TiO₂ nanofibers for the degradation of 2‐chlorophenol and 2,4‐dichlorophenol under UV or visible‐light irradiation is better than the one of commercial available TiO₂ powder, rutile, and anatase TiO₂ fibers.     

A general templated method to homogeneous and composition-tunable hybrid TiO2 nanocomposite fibers

Sequential impregnations of metal ions and titanium tetraisopropoxide (TTIP) into activated carbon fibers (ACF) followed by a solvothermal treatment has been found to be a general method in the preparations of homogeneous and composition-tunable hybrid TiO(2) hierarchical nanocomposite fibers like WO(3)/TiO(2), Fe(2)O(3)/TiO(2) and SnO(2)/TiO(2).     

TiO2/LaFeO3微纳米纤维的可控制备及光催化性能简

利用静电纺丝技术及水热合成法制备了TiO2/LaFeO3异质结构. 采用场发射扫描电子显微镜(FE-SEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱和紫外-可见漫反射光谱(UV-Vis)等手段对TiO2/LaFeO3微纳米纤维的结构和表面形态进行表征. 通过亚甲基蓝(MB)光降解反应研究了其光催化性能. 结果表明,不完全碳化TiO2纤维表面的缺陷位点是LaFeO3纳米粒子的有利生长点. TiO2/LaFeO3异质结材料的带隙明显窄于TiO2,光催化活性得到提高;经140 min紫外光照射后,TiO2/LaFeO3异质结催化剂对MB的降解率为65.34%,分析和探讨了其光催化机理.     

Easily manufactured TiO2 hollow fibers for quantum dot sensitized solar cells

TiO(2) hollow fibers with high surface area were manufactured by a simple synthesis method, using natural cellulose fibers as template. The effective light scattering properties of the hollow fibers, originating from their micron size, were observed by diffuse reflectance spectroscopy. In spite of the micrometric length of the TiO(2) hollow fibers, the walls were highly porous and high surface area (78.2 m(2) g(-1)) was obtained by the BET method. TiO(2) hollow fibers alone and mixed with other TiO(2) pastes were sensitized with CdSe quantum dots (QDs) by Successive Ionic Layer Adsorption and Reaction (SILAR) and integrated as a photoanode in quantum dot sensitized solar cells (QDSCs). High power conversion efficiency was obtained, 3.24% (V(oc) = 503 mV, J(sc) = 11.92 mA cm(-2), FF = 0.54), and a clear correspondence of the cell performance with the photoanode structure was observed. The unique properties of these fibers: high surface area, effective light scattering, hollow structure to facile electrolyte diffusion and the rather high efficiencies obtained here suggest that hollow fibers can be introduced as promising nanostructures to make highly efficient quantum dot sensitized solar cells.     

WO3/TiO2 复合纤维的制备及储能光催化性能

以钛酸正丁酯为前驱体, 采用静电纺丝技术制得了纯锐钛矿TiO2纤维, 并以其为基质, 通过水热法制备了具有异质结构的WO3/TiO2复合纤维. 利用X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 能量色散光谱仪(EDS)、 透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等对样品的结构和形貌进行了表征. 以罗丹明B的脱色降解为模型反应, 考察了样品的光催化性能和储能光催化性能. 结果表明, 花状WO3微球包裹在TiO2纤维上, 得到了具有异质结构的WO3/TiO2复合纤维光催化剂. WO3与TiO2复合有利于光生载流子的输运和分离, 增强了体系的量子效率, 提高了光催化活性. WO3/TiO2 复合纤维经光照处理后, 在黑暗条件下显示出储能光催化特性.     

Rectangular bunched rutile TiO2 nanorod arrays grown on carbon fiber for dye-sensitized solar cells

Because of their special application in photovoltaics, the growth of one-dimensional single-crystalline TiO(2) nanostructures on a flexible substrate is receiving intensive attention. Here we present a study of rectangular bunched TiO(2) nanorod (NR) arrays grown on carbon fibers (CFs) from titanium by a "dissolve and grow" method. After a corrosion process in a strong acid solution, every single nanorod is etched into a number of small nanowires. Tube-shaped dye-sensitized solar cells are fabricated by using etched TiO(2) NRs-coated CFs as the photoanode. An absolute energy conversion efficiency of 1.28% has been demonstrated under 100 mW cm(-2) AM 1.5 illumination. This work demonstrates an innovative method for growing bunched TiO(2) NRs on flexible substrates that can be applied in flexible devices for energy harvesting and storage.     

Preparation and characterization of porous TiO_2/ZnO composite nanofibers via electrospinning

<正>Porous TiO_2/ZnO composite nanofibers have been successfully prepared by electrospinning technique for the first time.It was generated by calcining TiO_2/ZnCl_2/PVP[PVP:polyvinyl pyrrolidone)]nanofibers,which were electrospun from a mixture solution of TiO_2,ZnCl_2 and PVP.Transmission electron microscopy(TEM) and X-ray diffraction(XRD) analyses were used to identify the morphology of the TiO_2/ZnO nanofibers and a formation of inorganic TiO_2/ZnO fibers.The porous structure of the TiO_2/ZnO fibers was characterized by N_2 adsoption/desorption isotherm.Surface photovoltage spectroscopy(SPS) and photocatalytic activity measurements revealed advance properties of the porous TiO_2/ZnO composite nanofibers and the results were compared with pure TiO_2 nanofibers,pure ZnO nanofibers and TiO_2/ZnO nanoparticles.     

同轴静电纺丝法在纳米中空Ti02纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶,钛酸四正丁酯和PVP溶胶,银颗粒为前驱体,以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维.将双组分纤维在200℃下热处理去除乙醇与表面吸附水后,继而在空气气氛中焙烧至600℃.可以得到在内表面上沉积银颗粒的TiO2纳米管,银颗粒的直径为5-40 nm,TiO2纳米管的外径150-300 nm.管臂厚10-20 nm.用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征.中空纤维的直径和管壁可以通过改变电纺参数来调节.与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较,Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

同轴静电纺丝法在纳米中空TiO2纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸四正丁酯和PVP溶胶/银颗粒为前驱体, 以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维. 将双组分纤维在200 ℃下热处理去除乙醇与表面吸附水后, 继而在空气气氛中焙烧至600 ℃, 可以得到在内表面上沉积银颗粒的TiO2纳米管, 银颗粒的直径为5-40 nm, TiO2纳米管的外径150-300 nm, 管臂厚10-20 nm. 用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征. 中空纤维的直径和管壁可以通过改变电纺参数来调节. 与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较, Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

Photocatalytic degradation of methylene blue by a combination of TiO2 and activated carbon fibers

Photocatalytic degradation of methylene blue (MB) in aqueous solution was investigated using TiO2 immobilized on activated carbon fibers (ACFs). The TiO2 and ACF combination (TiO2/ACF) was prepared by using epoxy as the precursor of the link between TiO2 and ACFs, followed by calcination at 460 degrees C in a N2 atmosphere. The TiO2/ACF composite prepared was easier to handle than the original TiO2 powder in suspension. More significantly, the TiO2/ACF composite can be used repeatedly without a decline in photodegradation ability. After six cycles, the amount of MB removal for the TiO2/ACF composite was still slightly higher than that for fresh P25 TiO2 in suspension. Through measurement of chemical oxygen demand in the solution and the concentration of ammonium generated during degradation of MB, it was confirmed that MB molecules are mineralized instead of adsorbed by ACFs.     

Long TiO2 hollow fibers with mesoporous walls: sol-gel combined electrospun fabrication and photocatalytic properties

Long TiO2 hollow fibers with mesoporous walls have been fabricated with the sol-gel combined two-capillary spinneret electrospinning technique using a triblock copolymer (Pluronic, P123, (H(C2H5O)20(C3H7O)70 (C2H5O)20OH) as a pore-directing agent. The as-prepared hollow fibers were as long as 30 cm with an outer diameter of 0.1-4 microm and wall thickness of 60-500 nm. The diameters and wall thicknesses of the hollow fibers could be tuned by adjusting the electrospinning parameters. The fiber walls were composed of mesopores 6.7 nm in diameter as calculated from the N2 adsorption/desorption isotherm. The high-resolution TEM (HR-TEM) images exhibited that the mesopores were hexagonally aligned with a low order because of the curving of the pores. When comparing with other nanostructured TiO2 materials such as commercial TiO2 nanoparticles (P25, Degussa) and mesoporous TiO2 powders, the hollow fibers exhibited higher photocatalytic activities toward degradation of methylene blue and gaseous formaldehyde.     

TiO2纤维的制备及其光催化活性研究

K₂Ti₄O₉纤维为前驱体经过离子交换合成纤维TiO₂.通过甲基橙废水模型体系考察了纤维TiO₂的光催化活性,同时研究了在不同pH值条件下TiO₂纤维分散体系的稳定性能.结果表明,TiO₂纤维光催化活性与微米级TiO₂相当,且控制溶液的pH值可实现TiO₂纤维与溶液的快速分离.     

Phase transition between nanostructures of titanate and titanium dioxides via simple wet-chemical reactions

Titanate nanofibers of various sizes and layered structure were prepared from inorganic titanium compounds by hydrothermal reactions. These fibers are different from "refractory" mineral substances because of their dimension, morphology, and significant large ratio of surface to volume, and, surprisingly, they are highly reactive. We found, for the first time, that phase transitions from the titanate nanostructures to TiO(2) polymorphs take place readily in simple wet-chemical processes at temperatures close to ambient temperature. In acidic aqueous dispersions, the fibers transform to anatase and rutile nanoparticles, respectively, but via different mechanisms. The titanate fibers prepared at lower hydrothermal temperatures transform to TiO(2) polymorphs at correspondingly lower temperatures because they are thinner, possess a larger surface area and more defects, and possess a less rigid crystal structure, resulting in lower stability. The transformations are reversible: in this case, the obtained TiO(2) nanocrystals reacted with concentrate NaOH solution, yielding hollow titanate nanotubes. Consequently, there are reversible transformation pathways for transitions between the titanates and the titanium dioxide polymorphs, via wet-chemical reactions at moderate temperatures. The significance of these findings arises because such transitions can be engineered to produce numerous delicate nanostructures under moderate conditions. To demonstrate the commercial application potential of these processes, we also report titanate and TiO(2) nanostructures synthesized directly from rutile minerals and industrial-grade rutiles by a new scheme of hydrometallurgical reactions.     

TiO2 synthesis inspired by biomineralization: control of morphology, crystal phase, and light-use efficiency in a single process

Hydroxyapatite is mineralized along the long axis of collagen fiber during osteogenesis. Mimicking such biomineralization has great potential to control inorganic structures and is fast becoming an important next-generation inorganic synthesis method. Inorganic matter synthesized by biomineralization can have beautiful and functional structures that cannot be created artificially. In this study, we applied biomineralization to the synthesis of the only photocatalyst in practical use today, titanium dioxide (TiO(2)). The photocatalytic activity of TiO(2) mainly relates to three properties: morphology, crystal phase, and light-use efficiency. To optimize TiO(2) morphology, we used a simple sequential peptide as an organic template. TiO(2) mineralized by a β-sheet peptide nanofiber template forms fiber-like shapes that are not observed for mineralization by peptides in the shape of random coils. To optimize TiO(2) crystal phase, we mineralized TiO(2) with the template at 400 °C to transform it into the rutile phase and at 700 °C to transform it into a mixed phase of anatase and rutile. To optimize light-use efficiency, we introduced nitrogen atoms of the peptide into the TiO(2) structure as doped elemental material during sintering. Thus, this biomineralization method enables control of inorganic morphology, crystal phase, and light-use efficiency in a single process.     

Reversible superhydrophobic to superhydrophilic conversion of Ag@TiO2 composite nanofiber surfaces

A new type of superhydrophobic material consisting of a surface with supported Ag@TiO(2) core-shell nanofibers has been prepared at low temperature by plasma-enhanced chemical vapor deposition (PECVD). The fibers are formed by an inner nanocrystalline silver thread which is covered by a TiO(2) overlayer. Water contact angles depend on the width of the fibers and on their surface concentration, reaching a maximum wetting angle close to 180 degrees for a surface concentration of approximately 15 fibers microm(-2) and a thickness of 200 nm. When irradiated with UV light, these surfaces become superhydrophilic (i.e., 0 degrees contact angle). The decrease rate of the contact angle depends on both the crystalline state of the titania and on the size of the individual TiO(2) domains covering the fibers. To the best of our knowledge, this is one of the few examples existing in the literature where a superhydrophobic surface transforms reversibly into a superhydrophilic one as an effect of light irradiation.     

铽负载介孔二氧化钛的制备、表征和协同效应

以嵌段共聚物P123为模板剂,采用蒸发诱导自组装法制备了铽负载介孔TiO2光催化剂,并利用XRD、N2吸附解吸和UV-Vis吸收光谱等技术手段对样品进行了表征。 制备的样品为锐钛矿和金红石混合晶相,以罗丹明B为模拟有机降解物,样品显示了良好的可见光催化活性。 研究发现0.7%的铽负载和380 ℃的煅烧温度是较佳的制备条件。 介孔结构所具有的高的比表面积、小的晶粒尺寸、铽负载诱导的电荷分离和可见光吸收增强协同提高了光催化活性。 同时,提出了铽负载二氧化钛诱导增强光催化作用的机理。     

Fibrous TiO2-SiO2 nanocomposite photocatalyst

The electrospinning method is employed to prepare a fibrous TiO2-SiO2 (Ti : Si = 1 : 2) nanocomposite photocatalyst, in which Degussa P25 T i O2 nanoparticles are embedded inthe body of SiO2 fibers and which shows good photocatalytic activity due to its 3-D open structure, as evidenced by photocatalytic reduction of silver ions and decomposition of acetaldehyde.     

Polycaprolactone composites with TiO(2) for potential nanobiomaterials: tunable properties using different phases

TiO(2) nanoparticles of different phases play a key role in property alteration of nanocomposite fibers. Polycaprolactone (PCL)/TiO(2) composite fibers were prepared using the electrospinning method. Pure anatase and rutile phases were synthesized using the sol-gel route for nanocomposite synthesis. The Effect of nanoparticle phases on crystallinity of fibers and interaction with polymer molecules have been studied using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, morphology through SEM, surface properties using BET method and wetting property of fibers commencing from contact angle measurement. Biocompatibility and biodegradation of hybrid materials have been studied in simulated body fluid (SBF) and phosphate buffer (PBS), respectively. The anatase phase with smaller particle dimensions exhibited significant improvement of most of the properties as compared to composites made of the rutile phase. Better interaction between polymer chain and anatase particle PCL-A nanocomposite fibers leads to better mechanical property and biocompatibility vis-à-vis PCL-R and pristine PCL fibers. Biocompatibility of PCL nanocomposite has been testified through proliferation of fibroblast cell and its adhesion; MTT (3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay demonstrates good proliferation rate for cells on PCL-A nanocomposite fibres.     

Mesoporous Fe2O3-doped TiO2 nanostructured fibers with higher photocatalytic activity

Mesoporous Fe(2)O(3)-doped TiO(2) nanostructured fibers were fabricated through electrospinning the relevant gel precursor. The prepared fibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and surface analysis, respectively. The photocatalytic activity of these mesoporous composite fibers was evaluated by photocatalytic degradation of methylene blue (MB) in water under UV irradiation. Compared with different types of photocatalysts, the 1% Fe(2)O(3)-doped TiO(2) fibers exhibited super photocatalytic activity.     

Cu掺杂TiO2及其纳米管的制备、表征与光催化性能

通过溶胶-凝胶法和水热法制备了Cu掺杂TiO₂纳米粉末及其纳米管,并通过XRD、TEM、FE-SEM、EDS、UV-Vis/DRS等手段分析了样品的结构。发现以Cu掺杂TiO₂纳米粉末为水热反应原料制备的纳米管中不含Cu,对其原因进行了分析讨论并通过Zn掺杂TiO₂纳米粉末证实：以金属掺杂TiO₂纳米粉末为原料,通过水热法制备TiO₂纳米管中不含有相应金属离子,这是由于金属离子在强碱水热条件下形成金属配离子,使金属离子溶解于水中而不能形成金属掺杂TiO₂纳米管。对所得样品进行了光催化性能测试,发现：Cu掺杂TiO₂粉末的光催化产氢效率为0.75 μmol·(g·h)^-1,高于由其本身及P25通过水热法制备的TiO₂纳米管(分别为：0.42 μmol·(g·h)^-1,0.25 μmol·(g·h)^-1)的光催化产氢效率。