A CASPT2//CASSCF study of the quartet excited state \tilde{a}^{4}A^{\prime\prime} of the HCNN radical

Complete active space self-consistent field and second-order multiconfigurational perturbation theory methods have been performed to investigate the quartet excited state ${\tilde{a}}^{4}{A^{\prime\prime}}$ potential energy surface of HCNN radical. Two located minima with respective cis and trans structures could easily dissociate to CH $({\tilde{a}}^{4}\Sigma^{-})$ and $N_{2} ({\tilde{X}}^{1}\Sigma_{\rm g}^{+})$ products with similar barrier of about 16.0 kcal/mol. In addition, four minimum energy crossing points on a surface of intersection between ${\tilde{a}}^{4}A^{\prime\prime}$ and X ( $X={\tilde{X}}^{2}A^{\prime\prime}$ and ${\tilde{A}}^{2}A^{\prime}$ ) states are located near to the minima. However, the intersystem crossing ${\tilde{a}}^{4}A^{\prime\prime} \rightarrow X$ is weak due to the vanishingly small spin–orbit interactions. It further indicates that the direct dissociation on the ${\tilde{a}}^{4}{A^{\prime\prime}}$ state is more favored. This information combined with the comparison with isoelectronic HCCO provides an indirect support to the recent experimental proposal of photodissociation mechanism of HCNN.     

Experimental determination of k 0 nuclear data for the cesium radionuclides

The current (official) k ₀ nuclear data for the cesium radionuclides was determined circa 1987 and was partially adopted from older literature. In this work we aimed at the redetermination of experimental k ₀, Q ₀ and $\bar{E}$ _r factors with metrological care. The results are in good agreement with more recent results from other authors. Our Q ₀ and $\bar{E}$ _r values were 2–15 and 25 % different, respectively. The k ₀ factors were determined according to the cadmium subtraction technique, resulting in values 3–7 % different than the official ones. Our precision and accuracy is discussed.     

Spectroscopic Studies on the Thermodynamics of the Complexation of Trivalent Curium with Propionate in the Temperature Range from 20 to 90 °C

The thermodynamics of the stepwise complexation reaction of Cm(III) with propionate was studied by time resolved laser fluorescence spectroscopy (TRLFS) and UV/Vis absorption spectroscopy as a function of the ligand concentration, the ionic strength and temperature (20–90 °C). The molar fractions of the 1:1 and 1:2 complexes were quantified by peak deconvolution of the emission spectra at each temperature, yielding the log₁₀ $ K_{n}^{\prime } $ values. Using the specific ion interaction theory (SIT), the thermodynamic stability constants log₁₀ $ K_{n}^{0} (T) $ were determined. The log₁₀ $ K_{n}^{0} (T) $ values show a distinct increase by 0.15 (n = 1) and 1.0 (n = 2) orders of magnitude in the studied temperature range, respectively. The temperature dependency of the log₁₀ $ K_{n}^{0} (T) $ values is well described by the integrated van’t Hoff equation, assuming a constant enthalpy of reaction and $ \Updelta_{\text{r}} C^\circ_{{p,{\text{m}}}} = 0, $ yielding the thermodynamic standard state $ \left( {\Updelta_{\text{r}} H^\circ_{\text{m}} ,\Updelta_{\text{r}} S^\circ_{\text{m}} ,\Updelta_{\text{r}} G^\circ_{\text{m}} } \right) $ values for the formation of the $ {\text{Cm(Prop)}}_{n}^{3 - n} $ , n = (1, 2) species.     

Free ions Pr IV (4\text{ f }^{2}) and Tm IV (4\text{ f }^{12}): intermediate versus LS coupling scheme

The intermediate and LS-coupling schemes for the free lanthanide ions $\text{ Pr }^{3+}$ Pr 3 + and $\text{ Tm }^{3+}$ Tm 3 + have been compared by the matrix elements of the tensor operator ${{\varvec{U}}}^{({\varvec{k}})}, \text{ k } = 2, 4, 6$ U ( k ) , k = 2 , 4 , 6 . The necessary eigenvectors and eigenvalues have been computed with the aid of four parameters, $\text{ F }_{2}, \text{ F }_{4}, \text{ F }_{6}$ F 2 , F 4 , F 6 , and $\zeta _{4\mathrm{f}}$ ζ 4 f , known from free-ion spectra of the same ions. It has been found that both coupling types for each ion lead to close values of ${\vert }{{\varvec{U}}}^{({\varvec{k}})}{\vert }^{2}$ | U ( k ) | 2 only for transitions from the ground level to certain lower-lying energy levels within the $4\text{ f }^\mathrm{N}$ 4 f N configuration.     

Infrared Spectroscopy of \hbox {CH}_4/\hbox {N}_{2} and \hbox {C}_{2}\hbox {H}_{m}/\hbox {N}_{2} ({m = 2, 4, 6}) Gas Mixtures in a Dielectric Barrier Discharge

Fourier transform infrared spectroscopy of \(\hbox {CH}_{4}/\hbox {N}_{2}\) and \(\hbox {C}_{2}\hbox {H}_{m}/\hbox {N}_2\) ( \(m = 2, 4, 6\) ) gas mixtures in a medium pressure (300 mbar) dielectric barrier discharge was performed. Consumption of the initial gas and formation of other hydrocarbon and of nitrogen-containing HCN and \(\hbox {NH}_{3}\) molecules was observed. \(\hbox {NH}_{3}\) formation was further confirmed by laser absorption measurements. The experimental result for \(\hbox {NH}_{3}\) is at variance with simulation results.     

Thermochemical Properties of n-Undecylammonium Bromide Monohydrate C11H28BrNO(s)

The crystal structure of n-undecylammonium bromide monohydrate was determined by X-ray crystallography. The crystal system of the compound is monoclinic, and the space group is P2₁/c. Molar enthalpies of dissolution of the compound at different concentrations m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. According to the Pitzer’s electrolyte solution model, the molar enthalpy of dissolution of the compound at infinite dilution ( $ \Updelta_{\text{sol}} H_{\text{m}}^{\infty } $ ) and Pitzer parameters ( $ \beta_{\text{MX}}^{(0)L} $ and $ \beta_{\text{MX}}^{(1)L} $ ) were obtained. Values of the apparent relative molar enthalpies ( $ {}^{\Upphi }L $ ) of the title compound and relative partial molar enthalpies ( $ \bar{L}_{2} $ and $ \bar{L}_{1} $ ) of the solute and the solvent at different concentrations were derived from experimental values of the enthalpies of dissolution.     

Positive ions of SiH4: Jahn-Teller-like distortions for {{\rm SiH}_{4}^{+}} and eventually molecular collapse on further ionisation.

We have recently studied by quantum-chemical calculations some fifteen tetrahedral and octahedral molecules. These seemingly disparate numerical tabulations were, it was demonstrated, pulled together by comparison with model semiclassical scaling laws for (i) nuclear–nuclear repulsion energy at the equilibrium geometry and (ii) total energies likewise. Here, we again appeal to such model scaling predictions, but now for positive ions of SiH₄. We then report Hartree-Fock equilibrium geometries and MP2 corrections. For ${{\rm SiH}_{4}^{+}}$ , we assumed the symmetry to be C_2v , by analogy with ${{\rm CH}_{4}^{+}}$ for which experimental confirmation of this symmetry is available. Larger distortions, but still for C_2v symmetry, are found from our quantum-chemical studies in the case of ${{\rm SiH}_{4}^{2+}}$ . But for ${{\rm SiH}_{4}^{3+}}$ there is a marked tendency to return to a configuration quite close to tetrahedral symmetry. But non-convergence is found for ${{\rm SiH}_{4}^{4+}}$ . Finally relations to the admittedly simplistic semiclassical geometry scaling predictions of Lawes and March are conjectured.     

Synergistic extraction of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate and bis(diphenylphosphino)methane dioxide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of bis(diphenylphosphino)methane dioxide (DPPMDO, L) has been investigated. The equilibrium data have been explained assuming that the species $ {\text{HL}}^{ + } $ , $ {\text{HL}}_{2}^{ + } $ , $ {\text{ML}}_{2}^{3 + } $ , $ {\text{ML}}_{3}^{3 + } $ and $ {\text{ML}}_{4}^{3 + } $ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that the stability constants of the corresponding complexes $ {\text{EuL}}_{n}^{3 + } $ and $ {\text{AmL}}_{n}^{3 + } $ , where n = 2, 3 and L is DPPMDO, in water–saturated nitrobenzene are comparable, whereas in this medium the stability of the cationic species $ {\text{AmL}}_{4}^{3 + } $ (L = DPPMDO) is somewhat higher than that of $ {\text{EuL}}_{4}^{3 + } $ with the same ligand L.     

Thermodynamic Analysis of Homologous α-Amino Acids in Aqueous Potassium Fluoride Solutions at Different Temperatures

Partial molal volumes ( $V_{\phi} ^{0}$ ) and partial molal compressibilities ( $K_{\phi} ^{0}$ ) for glycine, L-alanine, L-valine and L-leucine in aqueous potassium fluoride solutions (0.1 to 0.5?mol?kg^?1) have been measured at T=(303.15,308.15,313.15 and 318.15) K from precise density and ultrasonic speed measurements. Using these data, Hepler coefficients ( $\partial^{2}V_{\phi} ^{0}/\partial T^{2}$ ), transfer volumes ( $\Delta V_{\phi} ^{0}$ ), transfer compressibilities ( $\Delta K_{\phi} ^{0}$ ) and hydration number (n _H) have been calculated. Pair and triplet interaction coefficients have been obtained from the transfer parameters. The values of $V_{\phi} ^{0}$ and $K_{\phi} ^{0}$ vary linearly with increasing number of carbon atoms in the alkyl chain of the amino acids. The contributions of charged end groups ( $\mathrm{NH}_{3}^{+}$ , COO^?), CH₂ group and other alkyl chains of the amino acids have also been estimated. The results are discussed in terms of the solute?Ccosolute interactions and the dehydration effect of potassium fluoride on the amino acids.     

Molecular Interactions in 1-Ethyl-3-Methylimidazolim Tetrafluoroborate + Amide Mixtures: Excess Molar Volumes, Excess Isentropic Compressibilities and Excess Molar Enthalpies

The densities, ρ ₁₂, and speeds of sound, u ₁₂, of 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + N-methylformamide or N,N-dimethylformamide (2) binary mixtures at (293.15. 298.15. 303.15, 308.15 K), and excess molar enthalpies, $ H_{12}^{\text{E}} $ H 12 E , of the same mixtures at 298.15 K have been measured over the entire mole fraction range using a density and sound analyzer (Anton Paar DSA-5000) and a 2-drop microcalorimeter, respectively. Excess molar volume, $ V_{12}^{\text{E}} $ V 12 E , and excess isentropic compressibility, $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 , values have been calculated by utilizing the measured density and speed of sound data. The observed data have been analyzed in terms of: (i) Graph theory and (ii) the Prigogine–Flory–Patterson theory. Analysis of the $ V_{12}^{\text{E}} $ V 12 E data in terms of Graph theory suggest that: (i) in pure 1-ethyl-3-methylimidazolium tetrafluoroborate, the tetrafluoroborate anion is positioned over the imidazoliun ring and there are interactions between the hydrogen atom of (C–H{edge}) and proton of the –CH₃ group (imidazolium ring) with fluorine atoms of tetrafluoroborate anion, and (ii) (1 + 2) mixtures are characterized by ion–dipole interactions to form a 1:1 molecular complex. Further, the $ V_{12}^{\text{E}} $ V 12 E , $ H_{12}^{\text{E}} $ H 12 E and $ \left( {\kappa_{S}^{\text{E}} } \right)_{12} $ ( κ S E ) 12 values determined from Graph theory compare well with their measured experimental data.     

Density functional study on structures, stabilities, and electronic properties of size-selected Pd n Si q (n = 1–7 and q = 0, +1, −1) clusters

The density functional theory (DFT) calculations within the framework of generalized gradient approximation have been employed to systematically investigate the geometrical structures, stabilities, and electronic properties of Pd _n Si ^q (n = 1–7 and q = 0, +1, ?1) clusters and compared them with the pure ${\text{Pd}}_{n + 1}^{q}$ (n = 1–7 and q = 0, +1, ?1) clusters for illustrating the effect of doping Si atom into palladium nanoclusters. The most stable configurations adopt a three-dimensional structure for both pure and Si-doped palladium clusters at n = 3–7. As a result of doping, the Pd _n Si clusters adopt different geometries as compared to that of Pd _n+1. A careful analysis of the binding energies per atom, fragmentation energies, second-order difference of energies, and HOMO–LUMO energy gaps as a function of cluster size shows that the clusters ${\text{Pd}}_{4}^{ + }$ , ${\text{Pd}}_{4}$ , ${\text{Pd}}_{8}^{ - }$ , ${\text{Pd}}_{5} {\text{Si}}^{0, + , - }$ , and ${\text{Pd}}_{7} {\text{Si}}^{0, + , - }$ possess relatively higher stability. There is enhancement in the stabilities of palladium frameworks due to doping with an impurity atom. In addition, the charge transfer has been analyzed to understand the effect of doped atom and compared further.     

Excess Molar Volumes and Excess Isentropic Compressibilities of o-Toluidine + Tetrahydropyran with Pyridine or Benzene or Toluene Ternary Mixtures at 298.15, 303.15 and 308.15 K

The densities, ρ ₁₂₃, and speeds of sound, u ₁₂₃, of ternary o-toluidine (OT, 1) + tetrahydropyran (THP, 2) + pyridine (Py) or benzene or toluene (3) mixtures have been measured as a function of composition at 298.15, 303.15 and 308.15 K. Values of the excess molar volumes, $ V_{123}^{\text{E}} , $ and excess isentropic compressibilities, $ (\kappa_{\text{S}}^{\text{E}} )_{123} , $ of the studied mixtures have been determined by employing the measured experimental data. The observed thermodynamic properties were fitted with the Redlich–Kister equation to determine adjustable ternary parameters and standard deviations. The $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values were also analyzed in terms of Graph theory. It was observed that Graph theory correctly predicts the sign as well as magnitude of $ V_{123}^{\text{E}} $ and $ (\kappa_{\text{S}}^{\text{E}} )_{123} $ values of the investigated mixtures. Analysis of the data suggests strong interactions and a more close packed arrangement in OT (1) + THP (2) + Py (3) mixtures as compared to those of the OT (1) + THP (2) + benzene (3) or toluene (3) mixtures. This may be due to the presence of a nitrogen atom in Py which results in stronger interactions for the OT:THP molecular entity as compared to those with benzene or toluene.     

The Formation and Stability of the [FePy3Cl3]· Py Clathrate in the Pyridine–Iron(III) Chloride System: Phase Diagram and Solid–Gas Equilibria Study

The phase diagram of the pyridine–iron(III) chloride system has been studied for the 223–423 K temperature and 0–56 mass-% concentration ranges using differential thermal analysis (DTA) and solubility techniques. A solid with the highest pyridine content formed in the system was found to be an already known clathrate compound, [FePy₃Cl₃]·Py. The clathrate melts incongruently at 346.9 ± 0.3 K with the destruction of the host complex: [FePy₃Cl₃]·Py_(solid)=[FePy₂Cl₃]_(solid) + liquor. The thermal dissociation of the clathrate with the release of pyridine into the gaseous phase (TGA) occurs in a similar way: [FePy₃Cl₃]·Py_(solid)=[FePy2Cl₃]_(solid) + 2 Py_(gas). Thermodynamic parameters of the clathrate dissociation have been determined from the dependence of the pyridine vapour pressure over the clathrate samples versus temperature (tensimetric method). The dependence experiences a change at 327 K indicating a polymorphous transformation occurring at this temperature. For the process ${1 \over 2}[\hbox{FePy}_{3}\hbox{Cl}_{3}]\cdot \hbox{Py}_{\rm (solid)} = {1 \over 2}[\hbox{FePy}_{2}\hbox{Cl}_{3}]_{\rm (solid)} + \hbox{Py}_{\rm (gas)}$ in the range 292–327 K, ΔH $^{0}_{298}$ =70.8 ± 0.8 kJ/mol, ΔS $^{0}_{298}$ =197 ± 3 J/(mol K), ΔG $^{0}_{298}$ =12.2 ± 0.1 kJ/mol; in the range 327–368 K, ΔH $^{0}_{298}$ =44.4 ± 1.3 kJ/mol, ΔS $^{0}_{298}$ =116 ± 4 J/(mol K), ΔG $^{0}_{298}$ =9.9 ± 0.3 kJ/mol.     

A thermodynamic study of complexation of 18-crown-6 with Zn2+, Tl+, Hg2+ and {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} cations in acetonitrile-dimethylformamide binary media and study the effect of anion on the stability constant of (18C6-Na+) complex in methanol solutions

The equilibrium constants and thermodynamic parameters for complex formation of 18-crown-6(18C6) with Zn²⁺, Tl⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations have been determined by conductivity measurements in acetonitrile(AN)-dimethylformamide(DMF) binary solutions. 18-crown-6 forms 1:1 complexes [M:L] with Zn²⁺, Hg²⁺ and $ {\text{UO}}^{{{\text{2 + }}}}_{{\text{2}}} $ cations, but in the case of Tl⁺ cation, a 1:2 [M:L₂] complex is formed in most binary solutions. The thermodynamic parameters ( $ \Delta {\text{H}}^{ \circ }_{{\text{c}}} $ and $ \Delta {\text{S}}^{ \circ }_{{\text{c}}} $ ) which were obtained from temperature dependence of the equilibrium constants show that in most cases, the complexes are enthalpy destabilized but entropy stabilized and a non-monotonic behaviour is observed for variations of standard enthalpy and entropy changes versus the composition of AN/DMF binary mixed solvents. The obtained results show that the order of selectivity of 18C6 ligand for these cations changes with the composition of the mixed solvent. A non-linear relationship was observed between the stability constants (logK_f) of these complexes with the composition of AN/DMF binary solutions. The influence of the $ {\text{ClO}}^{ - }_{{\text{4}}} $ , $ {\text{NO}}^{ - }_{{\text{3}}} $ and $ {\text{Cl}}^{ - } $ anions on the stability constant of (18C6-Na⁺) complex in methanol (MeOH) solutions was also studied by potentiometry method. The results show that the stability of (18C6-Na⁺) complex in the presence of the anions increases in order: $ {\text{ClO}}^{ - }_{{\text{4}}} $  >  $ {\text{NO}}^{ - }_{{\text{3}}} $  >  $ {\text{Cl}}^{ - } $ .     

Crystal structure and thermodynamic properties of dipotassium diiron(III) hexatitanium oxide

In the present work, the temperature dependence of heat capacity of dipotassium diiron(III) hexatitanium oxide has been measured for the first time in the range from 10 to 300 K by means of precision adiabatic vacuum calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity $ C_{p}^{ \circ } (T) $ , enthalpy $ H^{ \circ } (T) - H^{ \circ } (0) $ , entropy $ S^{ \circ } (T) - S^{ \circ } (0), $ and Gibbs function $ G^{ \circ } (T) - H^{ \circ } (0) $ for the range from T → 0 to 300 K. The structure of K₂Fe₂Ti₆O₁₆ is refined by the Rietveld method: space group I4/m, Z = 1, a = 10.1344(2) Å, c = 2.97567(4) Å, V = 305.618(7) Å³. The high-temperature X-ray diffraction was used for the determination of coefficients of thermal expansion.     

Volumetric Properties of the Nucleoside Thymidine in Aqueous Solution at T = 298.15 K and p = (10 to 100) MPa

Sound speeds have been measured for aqueous solutions of the nucleoside thymidine at T = 298.15 K and at the pressures p = (10, 20, 40, 60, 80, and 100) MPa. The partial molar volumes at infinite dilution, $ V_{2}^{\text{o}} $ , the partial molar isentropic compressions at infinite dilution, $ K_{S,2}^{\text{o}} $ , and the partial molar isothermal compressions at infinite dilution, $ K_{T,2}^{\text{o}} $ $ \{ K_{T,2}^{\text{o}} = - (\partial V_{2}^{\text{o}} /\partial p)_{T} \} $ , have been derived from the sound speeds at elevated pressures using methods described in our previous work. The $ V_{2}^{\text{o}} $ and $ K_{T,2}^{\text{o}} $ results were rationalized in terms of the likely interactions between thymidine and the aqueous solvent. The $ V_{2}^{\text{o}} $ results were also compared with those calculated using the revised Helgeson–Kirkham–Flowers (HKF) equation of state.     

Volumetric Properties of l-Alanine and l-Serine in Aqueous N,N-Dimethylformamide Solutions at 298.15 K

The densities of l-alanine and l-serine in aqueous solutions of N,N-dimethylformamide (DMF) have been measured at 298.15 K with an Anton Paar Model 55 densimeter. Apparent molar volumes $ (V_{\phi } ) $ ( V ? ) , standard partial molar volumes $ (V_{\phi }^{0} ) $ ( V ? 0 ) , standard partial molar volumes of transfer $ (\Updelta_{\text{tr}} V_{\phi }^{0} ) $ ( Δ tr V ? 0 ) and hydration numbers have been determined for the amino acids. The $ \Updelta_{\text{tr}} V_{\phi }^{0} $ Δ tr V ? 0 values of l-serine are positive which suggest that hydrophilic–hydrophilic interactions between l-serine and DMF are predominant. The –CH₃ group of l-alanine has much more influence on the volumetric properties and the $ \Updelta_{\text{tr}} V_{\phi }^{0} $ Δ tr V ? 0 have smaller negative values. The results have been interpreted in terms of the cosphere overlap model.     

The calculation of the detection efficiency in the calibration of gross alpha–beta systems

This paper presents a method for efficiency calibration of a measuring alpha–beta system PROTEAN ORTEC, MPC-2000-DP, using standard radioactive sources. The system is used to measure gross alpha–beta activity concentrations in environmental samples. The calculated efficiencies of detection were subsequently introduced in the system for two working geometries: measuring geometry—gross alpha–beta $ \varepsilon_{\alpha }^{g} $  = 31,37 ± 0.25 (%)—the alpha efficiency and $ \varepsilon_{\beta }^{g} $  = 44.94 ± 0.69 (%)—the beta efficiency, where the spillover factor is $ X_{\text{talk}}^{g} $  = 25.59 ± 0.50 (%) and measuring geometry up alpha–beta $ \varepsilon_{\alpha }^{u} $  = 36.23 ± 0.29 (%)—the alpha efficiency and $ \varepsilon_{\beta }^{u} $  = 48.53 ± 0.74 (%)—the beta efficiency, where the spillover factor is $ X_{\text{talk}}^{u} $  = 31.08 ± 0.60 (%).     

Establishment of the k 0, \bar{E}_{\rm r}, Q 0, and cascade coincidence correction factors for the determination of 129I by k 0-NAA

A k ₀-NAA procedure used in the determination of ¹²⁹I is established. For this purpose, the k ₀-values for the reaction ¹²⁹I (n, ??) ¹³⁰I are determined, the Q ₀- and $\bar{E}_{\rm r}$ -values are calculated, and the correction procedure for the cascade coincidence effects is established by calculation of the correction factor COI for five ¹³⁰I ??-rays (418.0, 536.1, 668.5, 739.5, and 1157.5 keV).     

Preparation and electrochemical properties of {\hbox{N}}{{\hbox{d}}_{{{2} - x}}}{\hbox{S}}{{\hbox{r}}_x}{\hbox{Fe}}{{\hbox{O}}_{{{4} + \delta }}} cathode materials for intermediate-temperature solid oxide fuel cells

Cathodic materials $ {\hbox{N}}{{\hbox{d}}_{{{2} - x}}}{\hbox{S}}{{\hbox{r}}_x}{\hbox{Fe}}{{\hbox{O}}_{{{4} + \delta }}} $ (x?=?0.5, 0.6, 0.8, 1.0) with K₂NiF₄-type structure, for use in intermediate-temperature solid oxide fuel cells (IT-SOFCs), have been prepared by the glycine?Cnitrate process and characterized by XRD, SEM, AC impedance spectroscopy, and DC polarization measurements. The results have shown that no reaction occurs between an $ {\hbox{N}}{{\hbox{d}}_{{{2} - x}}}{\hbox{S}}{{\hbox{r}}_x}{\hbox{Fe}}{{\hbox{O}}_{{{4} + \delta }}} $ electrode and an Sm_0.2Gd_0.8O_1.9 electrolyte at 1,200?°C, and that the electrode forms a good contact with the electrolyte after sintering at 1,000?°C for 2?h. In the series $ {\hbox{N}}{{\hbox{d}}_{{{2} - x}}}{\hbox{S}}{{\hbox{r}}_x}{\hbox{Fe}}{{\hbox{O}}_{{{4} + \delta }}} $ (x?=?0.5, 0.6, 0.8, 1.0), the composition $ {\hbox{N}}{{\hbox{d}}_{{{1}.0}}}{\hbox{S}}{{\hbox{r}}_{{{1}.0}}}{\hbox{Fe}}{{\hbox{O}}_{{{4} + \delta }}} $ shows the lowest polarization resistance and cathodic overpotential, 2.75????cm² at 700?°C and 68?mV at a current density of 24.3?mA?cm^?2 at 700?°C, respectively. It has also been found that the electrochemical properties are remarkably improved the increasing Sr content in the experimental range.