柱前衍生-高效液相色谱法测定调制乳粉中左旋肉碱的含量

建立了柱前衍生-高效液相色谱(HPLC)测定乳制品中左旋肉碱含量的方法。试样经0.1 mol/L盐酸超声提取后,采用阳离子交换固相萃取柱净化,在三乙胺和氯甲酸丁酯的催化下与L-丙酰胺-β-萘胺发生取代反应,使用配有二极管阵列检测器(DAD)的高效液相色谱仪测定,外标法定量。该方法在0.250~50.0 mg/L范围内线性关系良好,线性方程为y=164.4x-11.3,相关系数为0.9998,加标回收率为84.3%~86.0%,相对标准偏差为1.93%~3.18%。该方法的检出限为10 mg/kg,定量限为25 mg/kg。运用该方法对国内20个实际乳粉样品中的左旋肉碱含量进行测定,20个样品中均检出了左旋肉碱,含量为53~163 mg/kg。该方法快速、简便、准确,适用于乳品中左旋肉碱含量的检测。     

高效液相色谱-串联质谱法测定土壤中的氯酸盐和高氯酸盐北大核心CSCD

针对土壤样品的分析,建立了一种同时测定氯酸盐和高氯酸盐含量的高效液相色谱-串联质谱(LC-MS/MS)法。样品经过超声提取、高速离心去除杂质,上清液过固相萃取柱及滤膜净化,用液-质联用仪测定,内标法定量。氯酸盐在2.00~200 ng/mL浓度范围内线性关系良好,相关系数为0.9997,检出限为6.0μg/kg,定量限为20.0μg/kg,加标回收率在92.0%~102.5%,相对标准偏差(RSD)为2.9%;高氯酸盐在1.00~100 ng/mL浓度范围内线性关系良好,相关系数为0.9996,检出限为4.0μg/kg,定量限为10.0μg/kg,加标回收率在94.6%~108.0%,RSD为3.6%。该方法操作简单、测定结果稳定,可用于土壤中氯酸盐和高氯酸盐含量的测定。     

固相萃取/~(18)O标记高氯酸根稀释高效液相色谱-串联质谱法测定水果中的高氯酸盐

建立了水果中高氯酸盐的高效液相色谱-串联质谱分析检测方法。样品采用1%乙酸提取,C18固相萃取柱净化,Waters IC-Pak Anion HR(4.6 mm×75 mm)色谱柱洗脱,流动相为乙腈-100 mmol/L乙酸铵溶液(体积比60∶40),流速0.7 m L/min;液相色谱-三重四极杆质谱联用技术-电喷雾负离子监测模式检测,采用18O标记高氯酸根离子作为内标进行基质校正,内标法定量。结果表明:高氯酸盐在0.1~10.0μg/L范围内线性关系良好,定量下限为1.0μg/kg;在1.0,2.0,10μg/kg 3个加标水平下的回收率为92.5%~110%,相对标准偏差(RSD)为1.4%~5.4%。实际样品检测表明该方法准确可靠,适合于水果中高氯酸盐的测定。     

同位素稀释高效液相色谱-串联质谱法测定面粉及面制品中的联二脲

建立了面粉及其制品中联二脲的同位素稀释高效液相色谱-串联质谱检测方法。采用纯水超声提取,含油脂的样品加正己烷脱脂,所得样液进行高效液相色谱-串联质谱测定。以乙腈与纯水为流动相,梯度洗脱,经Waters XBridge BEH Amide(3.5μm,4.6 mm×150 mm)色谱柱分离,MS/MS采用电喷雾电离正离子(ESI+),多反应监测(MRM)模式检测,同位素内标法定量。方法的线性范围为0.2~100μg/L,相关系数为0.999 9;在面粉、馒头、面包、油条和面条5种基质中的平均加标回收率为82.0%~113.6%,相对标准偏差(RSD)为2.1%~9.3%;方法定量下限(LOQ)为20μg/kg。应用该方法对136份市售的面粉及面制品进行检测,在42份样品中检出联二脲,检出率为30.88%。其中面粉检出4份,含量为43.7~564μg/kg;馒头未检出;面条检出2份,分别为70.8μg/kg与9 840μg/kg;油条检出1份,含量为2 480μg/kg;面包表层检出15份,含量为27.4~8 730μg/kg;面包内芯检出20份,含量为64.3~18 100μg/kg。该方法操作简单、灵敏快速、准确可靠,适用于面粉及其制品中联二脲的测定。     

亲水作用色谱-串联质谱法测定乳及乳制品中左旋肉碱

建立了亲水作用色谱-串联四极杆质谱测定乳及乳制品中左旋肉碱的分析方法。样品经2%(v/v)乙酸水溶液提取、乙腈沉淀蛋白质净化,以乙酸铵和乙腈为流动相,经Acquity UPLC BEH HILIC色谱柱分离后采用电喷雾质谱多反应监测(MRM)方式扫描,外标法定量。结果表明,左旋肉碱的质量浓度在1~100 μg/L范围内线性关系良好(r²> 0.99),定量限为0.01 mg/kg。标准加入法测定左旋肉碱在高、中、低3个加标水平的回收率为96.0%~103.4%,相对标准偏差(RSD)为1.2%~4.3%。该方法前处理简单、快速,检测结果准确、灵敏,可为各类乳及乳制品中左旋肉碱的含量水平测定、研究和控制提供技术支持。     

亲水相互作用色谱-串联质谱法同时测定动物组织中金刚烷胺与利巴韦林

采用亲水相互作用色谱-串联质谱技术,建立了同时测定动物组织中金刚烷胺和利巴韦林的方法。样品加入同位素内标,采用20 g/L三氯乙酸提取,经磷酸酯酶酶解,PBA固相萃取小柱净化后,采用HILIC色谱柱(100 mm×2.1 mm,3μm)分离,以5 mmol/L乙酸铵水溶液(含0.1%甲酸)-乙腈为流动相梯度洗脱,采用电喷雾离子源串联质谱,在正离子扫描方式下以多反应监测(MRM)模式检测,内标法定量。在优化条件下,金刚烷胺和利巴韦林在0.5~5.0μg/L质量浓度范围内线性关系良好,定量下限分别为1.0μg/kg和2.0μg/kg。在鸡肉和鸡肝样品中,金刚烷胺和利巴韦林在3个加标水平(分别为1.0、2.0、5.0μg/kg和2.0、5.0、10.0μg/kg)下的平均回收率为89.2%~109%,相对标准偏差为2.0%~9.3%。该方法准确可靠、方便快捷,适用于动物组织中金刚烷胺和利巴韦林的同时定量分析。     

气相色谱法测定有机肥料中的水分

建立气相色谱法测定有机肥料中水分含量的方法。样品在N,N-二甲基甲酰胺中超声提取,采用porapad-Q多孔高分子小球不锈钢填充柱(1 m×4 mm,177~250μm)为分离色谱柱,加入甲醇作为内标物,以热导检测器检测,内标法定量。结果表明,样品提取液中水的含量在0.00~77.85 mg/g范围内与色谱峰面积呈良好的线性关系,相关系数为0.9996。样品测定结果的相对标准偏差为0.79%~3.98%(n=7),加标回收率为95.3%~101.3%。该方法准确度高,重现性好,适用于有机肥料中水分含量的定量分析。     

分散固相萃取结合液相色谱-串联质谱法测定饲料中8种脂溶性着色剂

建立了饲料中8种脂溶性着色剂(对位红、苏丹红Ⅰ、苏丹红Ⅱ、苏丹红Ⅲ、苏丹红Ⅳ、苏丹红7B、苏丹红G、苏丹黄)含量的液相色谱-串联质谱测定方法。饲料样品中脂溶性着色剂经乙腈提取,离心后上清液采用分散固相萃取净化,净化液稀释后进行LC-MS/MS分析。样品测定时采用Acquity BEH C18色谱柱进行色谱分离,以0.2%甲酸溶液-乙腈作为流动相进行梯度洗脱,电喷雾正离子(ESI+)模式电离,多反应监测(MRM)模式检测,同位素稀释内标法定量。8种脂溶性着色剂在1.0~200μg/L范围内线性关系良好,相关系数(r~2)均大于0.998;在饲料中的方法检出限为5.0μg/kg,定量下限为10μg/kg。在10,50,500μg/kg加标浓度下8种脂溶性着色剂的回收率为102%~111%,批内相对标准偏差(RSD)为2.8%~8.0%,批间RSD为2.8%~7.8%。该方法能满足饲料样品中脂溶性着色剂监控的需要。     

固相萃取/液相色谱-串联质谱法测定果蔬中草铵膦的残留量

建立了果蔬中草铵膦残留量的液相色谱-串联质谱(LC-MS/MS)分析方法。样品经水提取、二氯甲烷除去脂溶性杂质,强阳离子固相萃取小柱净化,9-芴甲基氯甲酸酯(FMOC-Cl)衍生后,以C18色谱柱(4.6 mm×50 mm,1.8μm)进行分离,5 mmol/L乙酸铵水溶液(含0.1%甲酸)-乙腈(含0.1%甲酸)作为流动相梯度洗脱,电喷雾正离子模式电离(ESI+),多反应监测模式(MRM)检测,内标法定量。方法在0~200μg/L浓度范围内线性关系良好,相关系数(r2)大于0.995。方法检出限为10μg/kg,定量下限为20μg/kg。在不同食品基质中,草铵膦在20,200,500μg/kg加标水平下的平均回收率为80.8%~102.2%,相对标准偏差(RSD)为1.8%~7.9%。该法采用同位素内标定量,有效地消除了样品基质效应,灵敏度高、准确度好,适用于果蔬中草铵膦残留量的监控测定。     

GPC–HPLC–MS/MS法测定食用油中天然辣椒素、二氢辣椒素和合成辣椒素含量

以动植物油脂为实验材料,建立了测定食用油中天然辣椒素、二氢辣椒素和合成辣椒素含量的凝胶渗透色谱–高效液相色谱–串联质谱(GPC–HPLC–MS/MS)法。样品经凝胶渗透色谱净化后,采用液相色谱串联质谱法(HPLC–ESI–MS/MS)分析,多反应监测模式(MRM)下外标法定量。在0.1~5.0μg/L范围内线性良好,天然辣椒素、二氢辣椒素和合成辣椒素的相关系数分别为0.999 6,0.999 8,0.999 8,检出限为0.5μg/kg。在5μg/kg添加水平下,空白加标回收率为71.5%~82.5%,测定结果的相对标准偏差为3.0%~8.3%(n=6)。该方法样品处理过程简便快捷,测定结果准确,可满足实验室大量、快速分析的需求。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.