Synthesis,characterizations of silica-coated gold nanorods and its applications in electroanalysis of hemoglobin

Gold nanorods (GNRs) were synthesized by a seed–mediated growth approach followed by TEOS polymerization leading to the formation of silica layer surrounding the gold nanorod core. TEM images showed that the silica-coated gold nanorods (GNRs@SiO₂) were dispersed with an average aspect ratio of 3.1 for the GNRs cores and a uniform thickness of the silica shell. The core/shell nanocomposites were further used as efficient supports for the immobilization of hemoglobin (Hb) to fabricate a novel biosensor. The immobilized Hb showed an enhanced electron transfer for its heme Fe(III) to Fe(II) redox couple. This biosensor showed an excellent bioelectrocatalytic activity towards H₂O₂ with a linear range from 8.0 × 10⁻⁷ to 6.1 × 10⁻⁵ M, and the detection limit was 6.0 × 10⁻⁸ M at 3σ. The apparent Michaelis–Menten constant of the immobilized hemoglobin was calculated to be 0.13 mM.     

The influence of composition and structure of water-in-oil microemulsions on activities of Iraqi Turnip peroxidase

The activity of the enzyme Iraqi Turnip peroxidase (ITP) is studied in a reverse microemulsion composed of chloroform, aqueous buffer, sodium dodecylsulfate (SDS) and alcohols of the homologous series 1-propanol to 1-hexanol through the measurements of absorbancy of the product of oxidation at the wavelength of 470 nm in the course of reactions. The ITP catalyzed reaction is the oxidation of guaiacol by hydrogen peroxide. Maximum enzyme activity was obtained at ω₀ (molar ratio of water to surfactant) = 8. It was found that the oxidation reaction obeyed Michaelis–Menten kinetics in the investigated concentration rang (0.08–0.8 mM) of the substrate, and the Michaelis constant K_m and maximal reaction rate V_m were determined. The enzyme inhibition caused by the alcohols in microemulsions is a consequence of both the solubility of the alcohols in the buffer and the flexibility of the interfacial film.     

TiO2@CdS core–shell nanorods films: Fabrication and dramatically enhanced photoelectrochemical properties

In this paper, we prepared TiO₂@CdS core–shell nanorods films electrodes using a simple and low-cost chemical bath deposition method. The core–shell nanorods films electrodes were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV–vis spectrometry techniques. After applying these TiO₂@CdS core–shell nanorods electrodes in photovoltaic cells, we found that the photocurrent was dramatically enhanced, comparing with those of bare TiO₂ nanorods and CdS films electrodes. Moreover, TiO₂@CdS core–shell nanorods film electrode showed better cell performance than CdS nanoparticles deposited TiO₂ nanoparticles (P25) film electrode. A photocurrent of 1.31 mA/cm², a fill factor of 0.43, an open circuit photovoltage of 0.44 V, and a conversion efficiency of 0.8% were obtained under an illumination of 32 mW/cm², when the CdS nanoparticles deposited on TiO₂ nanorods film for about 20 min. The maximum quantum efficiency of 5.0% was obtained at an incident wavelength of 500 nm. We believe that TiO₂@CdS core–shell heterostructured nanorods are excellent candidates for studying some fundamental aspects on charge separation and transfer in the fields of photovoltaic cells and photocatalysis.     

Short aspect ratio gold nanorods prepared using gamma radiation in the presence of cetyltrimethyl ammonium bromide (CTAB) as a directing agent

The synthesis of short aspect ratio gold nanorods using gamma radiation method by incorporating cetyltrimethyl ammonium bromide (CTAB) as a directing agent is reported in this communication. The radiolysis of Au⁺, in the presence of 2.5 nm Au seeds and 0.1 mol dm^?3 isopropanol, results in the formation of Au spheres as evident from surface plasmon resonance band at 527 nm. However, by carrying out radiolysis at lower radiation dose rate, short aspect gold nanorods having surface plasmon bands at 513 and 670 nm have been prepared. The formation of rods at low radiation dose rate was observed to be governed by the kinetics of particle growth. The TEM of as-synthesized nanoparticles confirmed the formation of uniform sized nanorods having an aspect of 2.4.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.     

The investigation of thermodynamic parameters of kinetic reaction between o-phenylenediamine and gold (III)

A visible spectrophotometric method has been developed for the reaction kinetics of o-phenylenediamine in the presence of gold (III). The method is based on the measurement of the absorbance of the reaction o-phenylenediamine and gold (III). Optimum conditions for the reaction were established as pH 6 at λ = 466 nm.When the reaction kinetic of o-phenylenediamine by gold (III) was investigated, it was observed that the following rate formula was found as ln (A/A₀) = −kt, according to absorbance measurements. The activation energy E_a and Arrhenius constant A were calculated from the Arrhenius equation as 1.009 kJ · mol⁻¹ and 3.46 · 10⁻² s⁻¹, respectively. Other activation thermodynamic parameters, entropy, ΔS (J · mol⁻¹ · K⁻¹), enthalpy, ΔH (kJ · mol⁻¹), Gibbs free energy, ΔG (kJ · mol⁻¹) and equilibrium constant, K_e were calculated at T = (283.2, 303.2, 323.2, and 343.2) K. The study was exothermic due to the decrease of entropy and was a non-spontaneous process during activation.     

Determination of hydrogen sulfide in gasoline by Au nanoclusters modified glassy carbon electrode

A promising hydrogen sulfide (H₂S) sensor was prepared by electrodeposition of Au nanoclusters on glassy carbon electrode (GCE) and the surface structure was characterized by SEM and EDAX. These flower-like form Au nanoclusters, which were made up of highly dense clustering Au nanorods with an average diameter of 20 nm and length up to 80 nm, had an average size about 600 nm and uniformly distributed on the GCE surface. The electrocatalytic oxidation of H₂S in gasoline was performed on this modified electrode, which had a satisfactory liner response to H₂S in the range of 1–80 ppm and a detection limit of 0.45 ppm (s/n = 3). This sensor was sensitive, selective and stable.     

Kinetics and mechanism of the reduction of colloidal MnO2 by glycyl-leucine in the absence and presence of surfactants

The kinetics of the reduction of water-soluble colloidal manganese dioxide by glycyl-leucine (Gly-Leu) has been investigated in the presence of perchloric acid both in aqueous as well as micellar media at 35 °C. The study was carried out as functions of [MnO₂], [Gly-Leu] and [HClO₄]. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [Gly-Leu] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. Further, the use of surfactant micelles is highlighted as, in favourable cases, the micelles help the redox reactions by bringing the reactants into a close proximity due to hydrogen bonding. While the ionic surfactants SDS and CTAB have not shown any effect on the reaction rate, the nonionic surfactant TX-100 has catalytic effect which is explained in terms of the mathematical model proposed by Tuncay et al. (1999). The Arrhenius and Eyring equations are valid for the reaction over the range of temperatures used and different activation parameters (E_a, ΔH^#, ΔS^# and ΔG^#) have been evaluated. Kinetic studies show that the redox reaction between MnO₂ and Gly-Leu proceeds through a mechanism combining one- and two-electron pathways: Mn(IV) → Mn(III) → Mn(II) and Mn(IV) → Mn(II). On the basis of the observed results, a possible mechanism has been proposed and discussed.     

Controlled deposition of Pt on Au nanorods and their catalytic activity towards formic acid oxidation

Platinum submonolayer decorated gold nanorods with controlled coverage were prepared by the addition of Au nanorods into the growth solution of Pt in the presence of NH₂OH · HCl as the growth agent. The properties of Au nanorods decorated by Pt submonolayer were investigated by various techniques including transimission electron microscopy, X-ray diffraction, and electrochemical methods. The Pt decorated Au nanorods on carbon black showed significantly higher activity on formic acid electrooxidation than the conventional Pt/C catalysts. They showed different reaction path of formic acid electrooxidation by suppressing the formation of poisoning intermediate CO.     

Structural and spectroscopic studies of LaPO4:Ce/Tb@LaPO4@SiO2 nanorods: Synthesis and role of surface coating

Highly fluorescent LaPO₄:Ce/Tb@LaPO₄@SiO₂ (core/shell/Si) nanorods(NRs) were fabricated with an average length 100 nm by co-precipitation process at low temperature. X-ray diffraction (XRD), Transmission electron microscopy (TEM), energy dispersive X-ray analysis, Fourier transform infrared, optical absorption and photoluminescence spectral techniques were applied to investigate the crystal structure, phase purity, morphology, surface chemistry and optical properties of the as-prepared samples. XRD results confirmed the formation of highly crystalline with single phase, monoclinic type structure. TEM image illustrates the poly-dispersed, narrow size distributed, irregular size rod-shaped nanostructures, with mean diameters of 20 nm and average lengths up to 140 nm. FTIR spectral analysis confirmed the silica surface modification. The comparative emission spectral study shows highest luminescence intensity of core/shell NRs, due to a reduction in nonradiative transition rate. The emission intensity enhancement proves that growing of an inert LaPO₄ layer on the surface of luminescent core-NRs was an effective way to suppress surface related quenching mechanism. These well crystalline, highly aqueous soluble along with extraordinary colloidal stability core/shell/Si NRs were extremely suitable material in fluorescent bio-labeling applications.     

PVP-Assisted ZrO2 coating on LiMn2O4 spinel cathode nanoparticles prepared by MnO2 nanowire templates

LiMn₂O₄ spinel nanorods prepared from nanowire MnO₂ templates were capped with polyvinyl pyrrolidone (PVP) and coated with ZrC₂O₄ precursors in aqueous solution. Upon annealing at 600 °C in air, an amorphous ZrO₂ nanoscale coating layer was obtained on the spinel nanoparticles with a particle size of <100 nm that formed from the splitting of the original spinel nanorods. The electrochemical cycling results clearly showed that nanoscale ZrO₂ coating significantly improved the rate capability and cycle life at 65 °C in spite of very high surface area of the spinel nanoparticles.     

Microfluidic cell with a TiO2-modified gold electrode irradiated by an UV-LED for in situ photocatalytic decomposition of organic matter and its potentiality for voltammetric analysis of metal ions

A novel microreactor for TiO₂-assisted photocatalysis in a microfluidic electrochemical cell was designed and constructed by a technology that can be reproduced in any chemical laboratory. The cell is obtained by a two-step thermal transfer of laser printed masks onto gold CD-Rs, a subtractive one to define the electrodes, and an additive one to define the channels. The TiO₂ nanoparticles are physically embedded in a gold matrix by electrodeposition from a solution of ions of this metal also containing colloidal suspension of anatase. This modification is conducted in the assembled microfluidic cell, with minimum material and time consumption. A 100 mW UV-LED (365 nm) is focused on the modified electrode and irradiation of the sample in the thin layer microreactor is conducted under stopped flow condition. The Cu–EDTA complex served as model system to demonstrate the in situ photocatalytic digestion of organic matter followed by the voltammetric determination of the metal ion in aqueous solution. The voltammetric wave of 1.0 × 10⁻³ mol L⁻¹ Cu(II) in acetate buffer (pH 4.7) at the gold electrode is suppressed by EDTA in the −0.3 to 0.8 vs. Ag/AgCl region. Irradiation of the bare electrode at 365 nm does not recover the wave, while irradiation of the TiO₂-modified gold electrode causes the recovery of the copper wave, proving the photocatalytic destruction of the chelating agent. Diffusion transport to/from the modified electrode rapidly enrolls the whole volume of sample in the thin-layer above the electrode (about 19 nL), so that in less than four minutes the recorded voltammogram become indistinguishable from that of a copper ion solution without EDTA. This novel in situ sample pre-treatment approach is very promising, deserving further research aiming its integration in micro-TAS.     

Dual-signal anodic stripping voltammetric determination of trace arsenic(III) at a glassy carbon electrode modified with internal-electrolysis deposited gold nanoparticles

A glassy carbon electrode (GCE) modified with internal-electrolysis deposited gold nanoparticles (AuNPs_ied) was applied to sensitively and selectively detect As(III) by anodic stripping linear sweep voltammetry (ASLSV). The AuNPs_ied/GCE was prepared based on the redox replacement reaction between a supporting-electrolyte-free aqueous HAuCl₄ and a copper sheet in saturated KCl separated by a salt bridge. Under optimum conditions (0.5 M aqueous H₂SO₄, 300-s preconcentration at − 0.4 V), the ASLSV peak current for the As(0)–As(III) oxidation responded linearly to As(III) concentration from 0.02 to 3 μM with a limit of detection (LOD) of 0.9 nM (0.07 μg L^− 1) (S/N = 3), while that for the As(III)–As(V) oxidation was linear with As(III) concentration from 0.02 to 1 μM with a LOD of 4 nM (0.3 μg L^− 1) (S/N = 3). An appropriate high-scan-rate for ASLSV can enhance both the sensitivity and signal-to-noise ratio. This method was applied for analyses of As(III) in real water samples.     

Intercalation of melamine into layered zirconium phosphates and their adsorption properties of formaldehyde in gas and solution phase

The intercalations of melamine into α- and γ-zirconium phosphates (α- and γ-ZrP) were investigated. Melamine-intercalated α-ZrP afforded two phases with different interlayer distances (d = 1.30 and 1.55 nm). The phase with d = 1.30 nm was obtained as the mixture with original α-ZrP at 30 min reaction by batch method, whereas the single phase with d = 1.55 nm was obtained by decantation method in saturated melamine aqueous solution. Contrary to this, for γ-ZrP a phase with d = 1.78 nm was obtained by both batch and decantation methods in saturated melamine aqueous solution. And new phase with d = 1.48 nm was formed in batch method at low pH or lower concentration of melamine aqueous solution. In these phases the arrangement of melamine changed from a monolayer structure to a bilayer structure with the increase of interlayer distance. Furthermore, melamine-intercalated α- and γ-ZrP adsorbed formaldehyde gas and formaldehyde in formalin solution by interacting with melamine molecule in the interlayer region. In melamine-intercalated γ-ZrP with d = 1.48 nm, the expansion of interlayer distance to around 1.6 nm was observed after the adsorption of formaldehyde gas and formaldehyde in formalin solution. The adsorption of formaldehyde in formalin solution was accompanied with the release of melamine in the interlayer region with increasing the concentration of formaldehyde at 65 °C.     

Hydrodechlorination of CCl4 over carbon-supported palladium–gold catalysts prepared by the reverse “water-in-oil” microemulsion method

Two series of carbon-supported Pd–Au catalysts were prepared by the reverse “water-in-oil, W/O” method, characterized by various techniques and investigated in the reaction of tetrachloromethane with hydrogen at 423 K. The synthesized nanoparticles were reasonably monodispersed having an average diameter of 4–6 nm (Pd/C and Pd–Au/C) and 9 nm (Au/C). Monometallic palladium catalysts quickly deactivated during the hydrodehalogenation of CCl₄. Palladium–gold catalysts with molar ratio Pd:Au = 90:10 and 85:15 were stable and much more active than the monometallic palladium and Au-richer Pd–Au catalysts. The selectivity toward chlorine-free hydrocarbons (especially for C₂₊ hydrocarbons) was increased upon introducing small amounts of gold to palladium. Simultaneously, for the most active Pd–Au catalysts, the selectivity for undesired dimers C₂H_xCl_y, which are considered as coke precursors, was much lower than for monometallic Pd catalysts. Reasons for synergistic effects are discussed. During CCl₄ hydrodechlorination the Pd/C and Pd–Au/C catalysts were subjected to bulk carbiding.     

Electrochemical deposition of (Mn, Co)-codoped ZnO nanorod arrays without any template

(Mn, Co)-codoped ZnO nanorod arrays were successfully prepared on Cu substrates by electrochemical self-assembly in solution of 0.5 mol/l ZnCl₂–0.01 mol/l MnCl₂–0.01 mol/l CoCl₂–0.1 mol/l KCl–0.05 mol/l tartaric acid at a temperature of 90 °C, and these nanorods were found to be oriented in the c-axis direction with wurtzite structure. Energy dispersive X-ray spectroscopy and x-ray diffraction show that the dopants Mn and Co are incorporated into the wurtzite-structure of ZnO. The concentrations of the dopants, and the orientations and densities of nanorods can easily be well controlled by the current densities of deposition or salt concentrations. Magnetization measurement indicates that the prepared (Mn, Co)-codoped ZnO nanorods with a coercivity of about 91 Oe and a saturation magnetization (M_s) of about 0.23 emu/g. The anisotropic magnetism for the (Mn, Co)-codoped ZnO nanorod arrays prepared in solution of 0.5 mol/l ZnCl₂–0.01 mol/l MnCl₂–0.01 mol/l CoCl₂–0.1 mol/l KCl–0.05 mol/l tartaric acid with current density of 0.5 mA/cm² was also investigated, and the crossover where the magnetic easy axis switches from parallel to perpendicular occurs at a calculated time of about 112 min. The anisotropic magnetism, depending on the rod geometry and density, can be explained in terms of a competition between self-demagnetization and magnetostatic coupling among the nanorods.     

Study on cloud points of Triton X-100-cationic gemini surfactants mixtures: A spectroscopic approach

This study investigates the effects of various cationic surfactants on the cloud point (CP) of the nonionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The values of CPs for Triton X-100 can be measured directly because TX-100 has an average number of oxyethylene units per molecule of p ≈ 9.5 and a CP = 66.0 °C. Quaternary ammonium dimeric surfactants (m-s-m, m = 10, 12, and 16, and s = 2, 6, and 10) were synthesized and used. The melting temperature T_M and the Krafft temperature T_K were measured for 1 wt% aqueous solutions of these synthesized surfactants. The melting temperature of the solid gemini surfactants increased with the carbon number of the alkyl chain. The results showed that additions of the gemini surfactants (which are infinitely miscible with water) to Triton X-100 increased the cloud point of the TX-100 solutions. All salts tested in these studies had a large effect on the CPs of nonionic surfactants due to their effect on water structure and their hydrophilicity. The effect of the alkyl chain length of the gemini surfactant on the CP of Triton X-100 is therefore more important than the spacer chain length.     

Excess molar volumes of (an alkane + 1-chloroalkane) atT = 298.15 K

The densities of the following: (pentane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (hexane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (heptane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (octane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), were measured at T =  298.15 K by means of a vibrating-tube densimeter. The excess molar volumes V_m^E, calculated from the density data, are negative for (pentane  +  1-chloropentane, or 1-chlorohexane) and (hexane  +  1-chlorohexane) over the entire range of composition. (Pentane  +  1-chlorobutane), (hexane  +  1-chloropentane) and (heptane  +  1-chlorohexane) exhibit an S-shapedV_m^E dependence. For all the other systems,V_m^E is positive. The V_m^Eresults were correlated using the fourth-order Redlich–Kister equation, with the maximum likelihood principle being applied for determining the adjustable parameters.     

Green synthesis of plant-stabilized Au nanoparticles for the treatment of gastric carcinoma

In this study, gold nanoparticles (AuNPs) were green synthesized using plant extract. The obtained nanoparticles (Au NPs) were characterized by advanced physical and chemical techniques like TEM, FTIR, UV–vis, SEM, XRD and EDX. SEM image displayed the quasi-spherical shaped nanoparticles of mean diameter 20–50 nm. All the particles were of uniform shape and texture. From the XRD pattern, four distinct diffraction peaks at 38.2°, 44.2°, 64.7° and 77.4° are indexed as (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes of fcc metallic gold. The in vitro cytotoxic and anti-gastric carcinoma effects of biologically synthesized Au NPs against cancer cell lines were assessed. The IC₅₀ of the Au NPs were 192, 149, 76 and 85 µg/mL against NCI-N87, MKN45, GC1401 and GC1436 gastric cancer cell lines. The anti-gastric carcinoma properties of the Au NPs could significantly remove the cancer cell lines in a time and concentration-dependent manner. So, the findings of the recent research show that biologically synthesized Au NPs might be used to cure cancer.     

On the phase behaviour of polyethoxylated sorbitan (Tween) surfactants in the presence of potassium inorganic salts

The salting out potential of potassium-based inorganic salts was assessed in aqueous solutions of two non-ionic surfactants from the Tween family. New solubility data of the systems {surfactant (Tween 20/Tween 80) + inorganic salt (K₃PO₄/K₂CO₃/K₂HPO₄/K₂S₂O₃/K₂SO₃) + H₂O} were experimentally ascertained at T = 298.15 K and these data were correlated by means of several three and four parameters empirical equations. Tie-line data were determined for the aqueous ternary systems and Ohtmer-Tobias and Bancroft equations have been proposed to correlate these data. The phase segregation effect of the proposed salts was investigated and compared with the sequence indicated by the Hofmeister series and the molar Gibbs energy of hydration (Δ_hydG) data.