TiO<Subscript>2</Subscript> nanotube height effect on the efficiency of dye-sensitized solar cells

Performance of dye-sensitized solar cells (DSSCs) based on TiO₂ nanotubes (NTs) filled with TiO₂ nanoparticles (NPs) was studied as a function of NT height (h). The NT height was varied in the range of 1.5–7.0 μm, while the NT diameter was kept constant at ~80 nm. The studies showed that DSSC efficiency, current density, and fill factor linearly increased with h and ranged in 1.76–6.5%, 3.62–13.2 mA/cm², and 0.66–0.76, respectively, within the h range studied. The electrochemical impedance spectroscopy was also performed to study DSSC electron transport properties. Based on both photovoltaic and electrochemical impedance spectroscopy data, the results were explained as being due to the increased dye loading that led to higher light-harvesting efficiency.     

Adsorption of titanium,chromium, and copper atoms on thin aluminum and magnesium oxide film surfaces

Methods of Auger electron spectroscopy (AES), spectroscopy of characteristic electron energy losses (SCEEL), slow electron diffraction (SED), and contact potential difference (CPD) in ultrahigh vacuum are used to investigate the adsorption-emission properties and stability of two-component film systems formed by putting of Ti, Cr, and Cu atoms on MgO–Mo(011) and Al₂O₃–Mo(011) surfaces. All atoms have the properties of electronegative adsorbates. Continuous adatom monolayers are formed on the Al₂O₃–Mo(011) system surface, and three-dimensional islands are formed on the MgO–Mo(011) surface. The properties of monoatomic films on the oxide layer surface are close to those observed for bulk materials. No radical changes of the system properties are detected with increasing dielectric layer thickness. The thermal stability of the newly formed structures decreases in the order Ti, Cr, Cu, Al₂O₃(MgO), and Mo(011).     

Comparative Study of Alternating Low-band-Gap Benzothiadiazole Co-oligomers

The benzothiadiazole – arylene alternating conjugated oligomers have been designed and synthesized via Suzuki coupling reaction. The structures and properties of the conjugated oligomers were characterized by ¹HNMR, ¹³CNMR, UV–vis absorption spectroscopy, photoluminescence (PL) spectroscopy. The luminescent measurements demonstrate that polybenzothiadiazoles are good chromophores able to form thin films by Langmuir-Blodgett (LB) technique, making them suitable for further applications. Also the electrical properties of obtained films confirm the good potential of these novel aryl-based π-conjugated polymers for the development of various electrical and electrochemical solid-state devices.     

EPR Studies of DOPA–Melanin Complexes with Fe(III)

Paramagnetic centers in 3,4-dihydroxyphenylalanine–melanin and its complexes with Fe(III) were examined by electron paramagnetic resonance (EPR) spectroscopy. Paramagnetic centers of melanin play an important role in detoxification of environment and they reveal high activity in binding of metal ions. Two different signals were observed in EPR spectra: lines of o-semiquinone free radicals and lines of paramagnetic Fe(III). Amplitudes of EPR lines of both free radicals and iron ions decrease with increasing Fe(III) content in melanin–metal ion complexes. Free radical concentrations in the melanin samples, g-factors, amplitudes and line widths of EPR spectra were determined. It was stated that fast spin–lattice relaxation processes exist in both free radical system and paramagnetic iron ions in melanin complexes.     

An efficient composite growing N-doped TiO<Subscript>2</Subscript> on multi-walled carbon nanotubes through sol–gel process

High-activity, visible-light-driven photocatalysts were prepared by forming N-doped TiO₂ on multi-walled carbon nanotubes (MWCNTs). The use of MWCNTs as the support in a N-doped TiO₂ system favored electron trapping, because the recombination process could be retarded, thus promoting photocatalytic activity. The prepared photocatalysts were systematically characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunaure–Emmett–Teller (BET) spectroscopy, and UV–Vis diffuse reflectance spectroscopy (UV–Vis/DRS). The results indicated that the N-doped TiO₂ coated on MWCNTs improved the surface area and slightly modified the optical properties of the composite. The activities of the photocatalysts were probed by photodegradation of methanol in the presence of visible light irradiation. The experimental results revealed that the strong interphase linkage between the MWCNTs and the N-doped TiO₂ played a significant role in improving photocatalytic activity. However, the mechanical process for MWCNT–TiO_2-x N _x mixtures showed lower activity than just pure N-doped TiO₂. In this study, N-doped TiO₂ precursors coated with pretreated MWCNTs during a sol–gel process could effectively form a MWCNT–TiO_2-x N _x composite. The composite showed excellent activity and effectively enhanced the efficiency of N-doped TiO₂ under the visible light region.     

Biocorrosion studies of TiO<Subscript>2</Subscript> nanoparticle-coated Ti–6Al–4V implant in simulated biofluids

The corrosion behaviors of the TiO₂ nanoparticles coated bioimplant Ti–6Al–4V exposed to three different simulated biofluids (SBF), namely, (1) NaCl solution, (2) Hank’s solution, and (3) Cigada solution, were studied by using micro-Raman spectroscopy, electrochemical techniques, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS). The different electrochemical impedance spectroscopy models were applied to fit the data obtained from the implants before and after the coating of TiO₂ nanoparticles (50–100 nm). It was found that the TiO₂ nanoparticle coatings increased the thickness of the pre-existing oxide layer on the Ti–6Al–4V surface, serving to improve the bioimplant corrosion resistance.     

Fabrication and characterization of Cu–CdSe–Cu nanowire heterojunctions

The Cu–CdSe–Cu nanowire heterojunctions were fabricated by sequential electrochemical deposition of layers of Cu metal and CdSe semiconductor within the nano-pores of anodic alumina membrane templates. X-ray diffraction reveals the cubic phase for Cu and hexagonal phase for CdSe in the electrodeposited Cu–CdSe–Cu nanowire heterojunctions. The composition of the nanowire heterojunction segments is characterized by energy dispersive X-ray spectroscopy. The morphological study of nanowire heterojunctions has been made using scanning electron microscope and high resolution transmission microscopy. The nanowire heterojunctions grown in 100 and 300 nm nano-pore size templates have been found to have optical band gaps of 1.92 and 1.75 eV, respectively. The absorption spectra of 100 nm nanowire heterojunctions show a blue shift of 0.18 eV. The collective nonlinear current–voltage (I–V) characteristics of the 300 and 100 nm nanowire heterojunctions show their rectifying and asymmetric behaviour, respectively.     

Evidence of large-angle reorientation in supercooledo-terphenyl

Summary We study the reorientation process of a paramagnetic radical dissolved in supercooledo-terphenyl around and belowT _g via the Electron Spin Resonance spectroscopy. The experimental results are at variance with the hypothesis of diffusive reorientation of the radical. Instead, the ESR lineshapes are fairly well reproduced by assuming that the radical reorientates via large angular jumps with a width Δϕ=80° _−5° ^+10° . The results are compared with previous²H NMR studies. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4–8, 1994.     

Interaction of CdTe Quantum Dots with 2,2-Diphenyl-1-Picrylhydrazyl Free Radical: A Spectroscopic, Fluorimetric and Kinetic Study

The interaction of 2,2-diphenyl-1-picrylhydrazyl (DPPH^●) free radical with thiol-capped CdTe quantum dots (QDs) has been studied by UV–vis spectroscopy, steady state and time resolved fluorescence measurements. Addition of DPPH^● radical to CdTe QDs resulted in fluorescence quenching. The interaction occurs through static quenching as this was confirmed by fluorescence lifetime measurements. Time course absorption studies indicates that DPPH^● may be reduced by interaction with QDs to the substituted hydrazine form (2,2-diphenyl-1-picrylhydrazine) DPPH-H. The mechanism of fluorescence quenching of CdTe QDs by DPPH^● is proposed.     

Pulsed EPR Analysis of the Photo-Induced Triplet Radical Pair in the BLUF Protein SyPixD: Determination of the Protein–Protein Distance and Orientation in the Oligomeric Protein

A photo-induced radical pair of FADH^· and Y8^· and in BLUF protein SyPixD was studied by pulsed electron paramagnetic resonance (EPR) spectroscopy. Blue light illumination at 150 K for 30 min followed by cooling to 50 K during illumination induced the stable radical pair. The EPR signal has been characterized by a Pake doublet signal with complete S = 1 spin state. The radical pair was utilized as a probe to analyze the oligomer of SyPixD. The relative arrangement of PixD proteins in the complex was investigated by pulsed electron–electron double resonance (PELDOR) with the orientation selection. Based on the decameric structure in the crystal, the possible structure for the PELDOR results was discussed.     

EPR Equilibration Study of the O–H Bond Dissociation Enthalpy in a Benzyl Phenolic Antioxidant

The equilibrium of the reaction galvinoxyl radical + 4,4′-methylene-bis(2,6-di-tert-butyl-phenol) (IOH) ⇆ hydrogalvinoxyl + 4,4′-methylene-bis(2,6-di-tert-butyl-phenoxyl radical) was monitored by electron paramagnetic resonance spectroscopy between 213 and 293 K. The equilibrium constant was calculated for each temperature point and correlated to T ⁻¹ applying the Van't Hoff relationship lnK _R = (−ΔH _R ⁰/RT) + (ΔS _R ⁰/R). The reaction enthalpy was found to be 12.0 ± 0.9 kJ/mol and the bond strength in IOH (BDE_(O–H)) = 340.7 ± 3.0 kJ/mol. The thermochemical stabilization of the involved phenoxyls is discussed. Authors' address: Sara N. Mendiara, Departamento de Química, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Funes 3350, Mar del Plata 7600, Argentina     

Controlled synthesis of CeO<Subscript>2</Subscript> nanoparticles using novel amphiphilic cerium complex precursors

Maleic anhydride was grafted by long-chain alcohols (1-hexadecanol, 1-octadecanol) to amphiphilic mono-L cis-butene dicarboxylates (L = hexadecyl, octadecyl), i.e., MAH, MAO, respectively. Subsequently, corresponding amphiphilic cerium complexes with these two mono-L cis-butene dicarboxylate ligands (Ce(L')₃, L'= MAH, MAO) were synthesized and behaved as the precursors to prepare CeO₂ nanoparticles for both of which can form nanosized micelle-like aggregates by special self-assembly in the wet chemical process. The nanoparticles were further characterized by Fourier transform-infrared spectroscopy (FTIR), Diffuse reflectance ultraviolet-visible spectra (DRUVS), scanning electron microscope (SEM), transmission electron microscope (TEM), and x-ray diffraction (XRD). Both the CeO₂ nanoparticles are in a cubic fluorite structure and present regular and well-dispersion club-like morphology with average particle size in the range of 40–70 nm. Besides, the strong ultraviolet–visible absorption for these CeO₂ nanoparticles can be found at the long-wavelength ultraviolet to visible region of 200–500 nm.     

Peculiarities and thermal stability of microstructure and strength properties of Ti–Al–Si–O–C–N films

Peculiar relationship between the composition and fine structure and the variations in strength properties of nanostructured and nanocomposite, high-carbon, high-oxygen Ti–Al–Si–N films are investigated using Auger spectroscopy, electron microscopy, X-ray structural analysis and hardness measurements. It is shown that a TiN-based phase can form in these films, which exhibits nanocrystalline or two-level grain structure distributed in the x-ray amorphous phase whose volume fraction is 20–50%. The grain-structure character can be deliberately changed by incorporating aluminum or silicon into the films. It is found out that irrespective of their structural state and composition the films demonstrate high thermal stability of superhardness and microstructure up to the temperatures Т ≈ 1173 K. Hardness is seen to decrease at Т ≥ 1273 K as a result of dislocation recovery, stress relaxation and early recrystallization. It is suggested that the high strength properties demonstrated by these films are due to the presence of dislocation substructure and high shear resistance of the x-ray amorphous phases along nanocrystallite boundaries. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 57–65, November, 2008.     

N-doping of pentacene by decamethylcobaltocene

We demonstrate n-type doping of pentacene with the powerful reducing molecule decamethylcobaltocene (CoCp₂^*). Characterization of pentacene films deposited in a background pressure of CoCp₂^* by X-ray photoemission spectroscopy and Rutherford backscattering confirm that the concentration of incorporated donor molecules can be controlled to a level as high as 1%. Ultraviolet photoemission spectroscopy show Fermi level (E _F) shifts toward unoccupied pentacene states, indicative of an increase in the electron concentration. A 1% donor incorporation level brings E _F to 0.6 eV below the pentacene lowest unoccupied molecular orbital. The corresponding electron density of ∼10¹⁸ cm⁻³ is confirmed by capacitance–voltage measurements on a metal–pentacene–oxide–silicon structure. The demonstration of n-doping suggests applications of CoCp₂^* to pentacene contacts or channel regions of pentacene OTFTs.     

Formation of defects in gallium phosphide grown in the presence of oxygen

The influence of oxygen introduced in the gaseous phase on the formation of defects in GaP epitaxial layers is investigated by deep-level transient spectroscopy. The extremal dependences of the concentrations of charge carriers and electron traps with energy E _c−0.24 eV on the oxygen flux are discussed. Zh. Tekh. Fiz. 67, 52–55 (September 1997)     

Fluorescence Properties of Dibenzofluorescein in Aqueous Solution

The deprotonation of dibenzofluorescein (DBFL), a long wavelength fluorescence probe, results in the simultaneous occurrence of neutral form, monoanion and dianion under physiological conditions. The fluorescence properties of the former two cannot be measured directly because they are always coexistent with some other species. By measuring the fluorescence under various pHs we computed the fluorescence parameters for each species involved in the prototropic equilibria of DBFL, including each species’ emission spectrum, excitation spectrum, emission and excitation maximum, fluorescence quantum yield and lifetime. It was found that the monoanion is the most fluorescent chromospheres (Φ _f = 0.66, compared to Φ _f = 0.25 for dianion, 0.18 for cation and 0.0 for the neutral form). Together with the computed pK _as, we are able to suggest that the monoanion plays a major role under physiological conditions when DBFL is used as a fluorescence probe, contrary to the assumption in literature.     

Solvothermally synthesized europium-doped CdS nanorods: applications as phosphors

To exploit the photoluminescent behavior of CdS at nanoscale with different doping concentration of europium—a rare earth element, we report the synthesis of Eu-doped CdS nanorods by using low temperature solvothermal process by using ethylenediamine. The outcomes can have future applications as phosphors, photovoltaic cells, lasers, light emitting diodes, bio-imaging, and sensors. The doping was confirmed by electron dispersive spectroscopy supported by X-ray diffraction. From scanning electron microscopy and transmission electron microscopy analysis it was observed that the average diameter of the Cd_1−x Eu _x S nanorods is about 10–12 nm having lengths in the range of 50–100 nm. UV–Visible spectroscopy study was carried out to determine the band gap of the nanorods and the absorbance peaks showed blue shift with respect to the bulk CdS. The blue shift was also observed as the doping concentration of Eu increases. From photoluminescence (PL) studies at λ_ex = 450 nm, peaks at 528 and 540 nm were observed due to CdS, peak at 570 nm is due to defects related transitions, while the peak at 613 nm is due to Eu. As the doping concentration of Eu is increased the intensity of the luminescent peak at 613 nm is increased. Thermogravimetric analysis showed the nanorods are thermally stable up to 300 °C. The traces of impurities adsorbed on the nanorods were confirmed by Fourier transform infrared spectroscopy.     

Spectral-kinetic characteristics of transient absorption in calcium fluoride crystals

The method of absorption spectroscopy with nanosecond resolution is used to study transient absorption in nominally pure crystals of CaF₂ irradiated by a pulse of fast electrons. Optical absorption caused by self-trapped excitons appears in the form of a superposition of bands with half-widths of no more than 0.2 eV in both the electron and hole components. These groups of bands are assigned to absorption of F, H pairs in various configurations. We observe a regular change in the spectral-kinetic characteristics depending on the distance between the components of the pair. Fiz. Tverd. Tela (St. Petersburg) 39, 1197–1201 (July 1997)     

Nanocrystalline GdAlO3: XPS,EPR and magnetic susceptibility studies

Nanocrystalline gadolinium monoaluminate (GdAlO₃) has been synthesized by sol–gel method after sintering the precursor gel at 950°C. The microstructural features have been proved by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray analysis (EDX). The XRD pattern confirms the formation of single-phase GdAlO₃ while EDX shows that this nanomaterial is stoichiometric; the average size of the nanoparticles is 40 nm. X-ray photoelectron spectroscopy (XPS) has been used to study the chemical composition and bonding in the as-prepared samples. The binding energies of core-level electrons in Gd, Al and O in GdAlO₃ nanopowder have been found slightly shifted compared to the corresponding values of the same elements. The electron paramagnetic resonance (EPR) spectra at 9.23 GHz (X-band) and different temperatures indicate the existence of magnetically concentrated solid containing Gd³⁺ ions. Nèel temperature, T _N =3.993 K, effective Bohr magneton number, μ _eff=8.18, and constant of magnetic exchange interaction, J _ex=−0.069 cm⁻¹, have been determined from DC magnetic susceptibilities measured in the range 2–300 K.     

Pure and Sn-, Ga- and Mn-doped ZnO gas sensors working at different temperatures for formaldehyde,humidity, NH<Subscript>3</Subscript>, toluene and CO

ZnO and Sn-, Ga- and Mn-doped ZnO nanoparticles were prepared by a coprecipitation method, and characterized by scanning electron microscopy (SEM), energy dispersive spectra (EDS), X-ray diffraction (XRD) and Raman spectra. The gas sensing properties were studied using formaldehyde, relative humidity, NH₃, toluene and CO as the probes. The results show that all particles have wurtzite ZnO phase, though Sn–ZnO has a relatively smaller particle (and crystallite) size than the other three samples. Gas sensing property tests reveal that the temperature where the gas sensing maximum is gained (T _M) is changed by different dopants: Sn–ZnO and Mn–ZnO have relatively lower T _M (∼100°C lower) compared with that of pure ZnO, while Ga–ZnO has the same T _M as pure ZnO except in CO sensing. Thermoluminescence (TL) spectra were used to investigate the mechanism of T _M change. The peak positions of Ga–ZnO and ZnO are the same at 300–350°C, while that of Sn–ZnO shifts to 250–300°C, which might contribute to the same T _M of Ga–ZnO and pure ZnO and relatively lower T _M of Sn–ZnO. In the case of Mn–ZnO, the luminescence emission is evidently limited by its black color.