Multiple charge states of titanium ions in laser produced plasma

An intense laser radiation (10¹² to 10¹¹ W/cm⁻²) focused on the solid target creates a hot (≥1 keV) and dense plasma having high ionization state. The multiple charged ions with high current densities produced during laser matter interaction have potential application in accelerators as an ion source. This paper presents generation and detection of highly stripped titanium ions (Ti) in laser produced plasma. An Nd:glass laser (KAMETRON) delivering 50 J energy (λ=0.53 μm) in 2.5 ns was focused onto a titanium target to produce plasma. This plasma was allowed to drift across a space of ∼3 m through a diagnostic hole in the focusing mirror before ions are finally detected with the help of electrostatic ion analyzer. Maximum current density was detected for the charge states of +16 and +17 of Ti ions for laser intensity of ∼10¹¹ W/cm⁻².     

Application of snow nanograin targets for the generation of fast ions in femtosecond laser plasma

We have measured the energy of the directed motion of multiply charged ions produced when solid targets are exposed to low-contrast (10^?3–10^?2) femtosecond laser pulses with intensities 10¹⁵–10¹⁶ W cm^?2. The measurements are based on the recording of spatially resolved X-ray spectra for H-and He-like oxygen ions in the target plane. Analysis of the He_β and Ly_α line profiles has revealed fractions of accelerated ions in plasma with energies from several to several tens of kiloelectronvolts. We show that using a layer of frozen nanometer-size water droplets as the targets leads to an effective absorption of laser pulses and a twofold rise in the energy (to 0.1 MeV) of He-like oxygen ions compared to the use of solid targets.     

X-ray-line plasma satellites of ions in solid target plasmas produced by picosecond laser pulse

The X-ray lines of ions in a solid target interacting with picosecond laser pulses of moderate intensity (2×10¹⁷ W/cm²) were measured on the “Neodim” laser facility. X-ray Ly _α emission spectra of hydrogen-like fluorine ions were observed. Satellite lines were also observed, evidencing the presence of intense plasma oscillations. The positions and separation between the satellites allow their assignment to the intense electrostatic oscillations with an amplitude larger than 10⁸ V/cm and a frequency of about 7× 10¹⁴ s^?1 that is noticeably lower than the laser frequency ω_las～1.8×10¹⁵ s^?1. It is suggested that these oscillations may be due to strong plasma turbulence caused by the development of plasma oscillations of the Bernstein-mode type under the action of a strong magnetic field generated in plasma. The experimental results are compared with the calculated spectra of multicharged ions.     

Particle-in-cell simulation for experimental ion acceleration by fs laser-generated plasma

ABSTRACT

Particle in cell simulation was applied to fit the measurements of protons and ions acceleration obtained using an fs laser pulse irradiating a thin foil in target-normal-sheath-acceleration regime. The simulation code calculates the maximum electrical field generated in the rear side of the target driving the forward ions acceleration. The electron density versus time and space, and the plasma temperatures are evaluated using a medium contrast laser at an intensity of about 10¹⁹?Wcm^?2. Proton acceleration above 10?MeV was experimentally measured using SiC detectors connected in time-of-flight configuration. A comparison between theoretical aspects and experimental data is reported and discussed.     

Non-equilibrium plasma production by pulsed laser ablation of gold

A gold target has been irradiated with a Q-switched Nd:Yag laser having 1064?nm wavelength, 9?ns pulse width, 900?mJ maximum pulse energy and a maximum power density of the order of 10¹⁰?W/cm². The laser–target interaction produces a strong gold etching with production of a plasma in front of the target. The plasma contains neutrals and ions having a high charge state. Time-of-flight (TOF) measurements are presented for the analysis of the ion production and ion velocity. A cylindrical electrostatic deflection ion analyzer permits measurement of the yield of the emitted ions, their charge state and their ion energy distribution. Measurements indicate that the ion charge state reaches 6⁺ and 10⁺ at a laser fluence of 100?J/cm² and 160?J/cm², respectively. The maximum ion energy reaches about 2?keV and 8?keV at these low and high laser fluences, respectively. Experimental ion energy distributions are given as a function of the ion charge state. Obtained results indicate that electrical fields, produced in the plume, along the normal to the plane of the target surface, exist in the unstable plasma. The electrical fields induce ion acceleration away from the target with a final velocity dependent on the ion charge state. The ion velocity distributions follow a “shifted Maxwellian distribution”, which the authors have corrected for the Coulomb interactions occurring inside the plasma.     

Experimental study and computer simulations of the implantation of laser plasma ions in pulsed electric fields

Results are presented from experimental studies of pulsed plasma flows generated by nanosecond laser pulses with an intensity of 7 × 10⁸ W/cm² from a solid-state target in a strong electric field. The current pulses through the laser target and the depth distributions of the iron ions implanted in a silicon substrate to which a negative high-voltage pulse was applied are measured. The physical processes occurring in laser plasma with an initial iron ion density of 6 × 10¹⁰ cm⁻³ are simulated numerically by the particle-in-cell method for different delay times and different shapes of the accelerating high-voltage pulse. The model developed allows one to calculate the ion flows onto the processed substrate, the electron flows onto the target, and the energy spectra of the implanted ions. The results from computer simulations are found to be in good agreement the experimental data.     

Nonlinear plasma spectroscopy of the hydrogen balmer-α line

The plasma line broadening of H_α fine-structure lines is investigated with Doppler-free saturation and polarization spectroscopy in He-H gas and are discharges at plasma densities of 10⁸ cm^?3 <N?1.4×10¹⁴ cm^?3. With a single-mode laser, the shift and broadening of four resolved H_α fs lines are measured in a low pressure discharge forN<10¹¹ cm^?3. With an intense, broadband multi-mode laser the plasma effects of H_α are investigated up toN=1.4×10¹⁴ cm^?3 in a hollow cathode are. Calculations in the classical phase shift and impact approximations can explain the experimental data and peculiarities of the low-density plasma effects and show that the ions are the dominant perturbers. Ion dynamical effects, perturber mass and temperature dependence, are observed and interpreted. Applications of the nonlinear techniques to other H and D lines, other atoms, and for H and D plasma diagnostics are discussed.     

Radiative transition of hydrogen-like ions in quantum plasma

At fusion plasma electron temperature and number density regimes of 1?×?10³–1?×?10⁷?K and 1?×?10²⁸–1?×?10³¹/m³, respectively, the excited states and radiative transition of hydrogen-like ions in fusion plasmas are studied. The results show that quantum plasma model is more suitable to describe the fusion plasma than the Debye screening model. Relativistic correction to bound-state energies of the low-Z hydrogen-like ions is so small that it can be ignored. The transition probability decreases with plasma density, but the transition probabilities have the same order of magnitude in the same number density regime.     

Spectral analysis of K-shell X-ray emission of magnesium plasma produced by ultrashort high-intensity laser pulse irradiation

Spectral analysis of K-shell X-ray emission of magnesium plasma, produced by laser pulses of 45 fs duration, focussed up to an intensity of ～10¹⁸ W cm^?2, is carried out. The plasma conditions prevalent during the emission of X-ray spectrum were identified by comparing the experimental spectra with the synthetic spectra generated using the spectroscopic code PrismSPECT. It is observed that He-like resonance line emission occurs from the plasma region having sub-critical density, whereas K-α emission arises from the bulk solid heated to a temperature of 10 eV by the impact of hot electrons. K-α line from Be-like ions was used to estimate the hot electron temperature. A power law fit to the electron temperature showed a scaling of I ^0.47 with laser intensity.     

Hydrodynamics of a dense plasma created during laser annealing pulses

We show that an electron-hole plasma with density well above the droplet one (≈ 10¹⁸ cm^?3 in Si) expands very fast. Adding Auger recombination and phonon collisions, the maximum density for typical laser annealing pulses is found to be at most a few times 10²⁰ cm^?3. As a plasma density of a few times 10²¹ cm^?3 is necessary to modify the stability of the solid, we conclude that the laser pulse has essentially a thermal effect.     

Plasma satellites of X-ray lines of ions in a picosecond laser plasma

We present the results of our measurements of the spectra for multicharged ions in a plasma produced by moderately intense (about 10¹⁷Wcm^?2) picosecond laser pulses. They suggest the existence of intense plasma oscillations with a frequency appreciably lower than the frequency of the laser radiation. The observed spectrum for the plasma satellites of the Lyman Ly_α doublet of the hydrogenic F IX ion in a dense plasma was modeled theoretically. The resulting doublet profile was shown to have a complex structure that depends non-trivially both on the plasma density and on the frequency and amplitude of the plasma oscillations. The positions of the satellites and their separations allowed them to be associated with intense electrostatic oscillations with an amplitude of (4–6)×10⁸Vcm^?1 and a frequency near (0.7–1)×10¹⁵s^?1. Assuming the oscillation frequency to be determined by the strength of the magnetic field B generated in the plasma, we obtained an estimate of B that is in reasonable agreement with other measurements and estimates of this quantity. Our theoretical analysis allowed explanation of the emission spectra observed when flat fluoroplastic targets were heated by intense picosecond laser pulses.     

Kinetic analysis of the ionization ratio effects on a three‐species plasma

In partially ionized plasmas, the energy transferred to electrically charged species by the electromagnetic field can be partly channelized to the population of neutrals, due to interspecies collisional processes. Depending on the relative density of neutrals, these effects may govern the collective plasma dynamics by drastically modifying particle dynamics and energy‐transport processes with respect to the fully ionized plasma‐approximation models. In this work, the influence of the ionization ratio r_i on a partially ionized plasma is analysed by means of a three‐species one‐dimensional kinetic model to compute transient and steady state velocity‐dependent distribution functions. The conservative collision operators accounting for charge–charge and charge–neutral interactions allow studying several plasma scenarios with the same entire number of particles per unit of volume but for an increasing r_i parameter, in the presence of a modulated signal‐like electric field. For a sequence of plasma scenarios of fixed r_i, ranging from typical weakly ionized to highly ionized plasma values r_i ～ 10^?7–10^?4, the mass species flows are examined. These flows behave linearly with respect to r_i up to a value r_i ? 10^?5 from which the quasi‐linear dependence is critically altered. The convection–diffusion equations are solved with the semianalytical Propagator Integral Method, which behaves well to deal with conservative operators, density, and field discontinuities, allowing for the use of collision terms of disparate time and spatial characteristic scales. The results can be relevant to a wide class of plasma systems and to analyse the ionization ratio effects on transport coefficients.     

Variations in the parameters of the erosion lead plasma with distance from the laser target

The main parameters of the erosion lead plasma (the atomic density, the densities of electrons and single-and double-charged ions, the pressure, the mean free path, and the degree of ionization) at distances 1 and 7 mm from the laser target are investigated using emission spectroscopy. The plasma was produced by using a repetitive neodymium laser with a peak intensity of (3–5) × 10⁸ W/cm², wavelength of 1.06 μm, pulse duration of 20 ns, and repetition rate of 12 Hz. Original Russian Text ? A.K. Shuaibov, M.P. Chuchman, 2006, published in Zhurnal Tekhnicheskoĭ Fiziki, 2006, Vol. 76, No. 11, pp. 61–65.     

Spatial and temporal electron and ion density variations within the focal region of an intense laser beam in a tenuous plasma

The recent availability of focussed laser beams with flux densities well in excess of 10¹⁵ watts/cm² at 1.06 μm has led to experimental investigations of direct interaction between intense electromagnetic fields and charged particles. In this paper the relevant hydrodynamic two-fluid mode equations for a singly ionized tenuous plasma eveloped by an intense spatially varying electromagnetic field at the focus of a pulsed laser beam is solved by computer simulations for a cylindrically symmetric geometry. Radial, axial and temporal variations of electron and ion densities are given for different laser intensities and particle number densities. Fluctuations in electron density are found due to the bulk oscillation of electrons relative to what is essentially a static array of massive ions. The possibility of generating intense electromagnetic fields devoid of charged particles is discussed.     

Characterization of the laser ablation plasma used for the deposition of amorphous carbon

The plasma produced by laser ablation of a graphite target was studied by means of optical emission spectroscopy and a Langmuir planar probe. Laser ablation was performed using a Nd:YAG laser with emission at the fundamental line with pulse length of 28 ns. In this work, we report the behavior of the mean kinetic energy of plasma ions and the plasma density, as a function of the laser fluence (J/cm²), and the target to probe (substrate) distance. The characterized regimes were employed to deposit amorphous carbon at different values of kinetic energy of the ions and plasma density. The mean kinetic energy of the ions could be changed from 40 to 300 eV, and the plasma density could be varied from 1 × 10¹² to 7 × 10¹³ cm⁻³. The main emitting species were C⁺ (283.66, 290.6, 299.2 and 426.65 nm) and C⁺⁺ (406.89 and 418.66 nm) with the C⁺ (426.65 nm) being the most intense and that which persisted for the longest times. Different combinations of the plasma parameters yield amorphous carbon with different structures. Low levels (about 40 eV) of ion energy produce graphitic materials, while medium levels (about 200 eV) required the highest plasma densities in order to increase the CC sp³ bonding content and therefore the hardness of the films. The structure of the material was studied by means of Raman spectroscopy, and the hardness and elastic modulus by depth sensitive nanoindentation.     

High harmonic generation in a laser plasma

The results of investigation of high harmonics of radiation of a Ti:sapphire laser propagating through a laser plasma generated on the surface of different targets are presented. For most of the targets, the intensity distribution of the high harmonics generated is found to form a plateaulike pattern similar to that observed in the case of gas jets. The generation of high harmonics (up to the 65th harmonic, λ = 12.24 nm) is caused by the interaction of femtosecond laser radiation with ions. The conversion efficiency in the plateau region varies from 10^?7 to 8 × 10^?5 depending on the target. The main restriction on the conversion efficiency and the peak intensity of the harmonics generated is caused by the self-defocusing of the femtosecond radiation due to free charge carriers formed as a result of tunnel ionization.     

Spectroscopic diagnostics of a laser erosion plasma formed from CuSbS<Subscript>2</Subscript> polycrystals

The spectra and dynamics of emission from regions of a laser plasma torch located at different distances from a polycrystalline CuSbS₂ target irradiated by a neodymium laser (W=(3–5)×10⁸ W/cm², ?=20 ns, f=12 Hz, 73x03BB;=1.06μm) were investigated. The emission data were used to estimate the average temperature (≤0.82 eV) and the electron density ((1.82?1.92)×10¹⁶ cm^?3) in the laser torch and the recombination times of ions (t _r(S²⁺)=15 ns, t _r(Cu⁺)=65?85 ns), as well as to analyze the efficiency of filling of excited atomic levels. A model describing the target destruction and the evolution of the processes accompanying spread of the laser plasma is proposed.     

Heating and cooling of the multiply charged ion nonequilibrium plasma in a high-current extended low-inductance discharge

Using a radiation magnetohydrodynamics two-temperature model (RMHD model) of a high-current volumetric radiating Z-discharge, the heating and cooling of the nitrogen plasma in a pulsed pinched extended discharge is investigated as applied to the problem of creating a recombination laser based on 3 → 2 transitions of hydrogen-like nitrogen ions (λ = 13.4 nm). It is shown that the power supply of the discharge, which is represented by a dual storage-forming line and a transmission line, makes it possible to raise the power density of the nitrogen plasma to 0.01–1.00 TW/cm³. Accordingly, there arises the possibility of generating a fully ionized (i.e., consisting of bare nuclei and electrons) plasma through the heating (compression) of electrons owing to the self-magnetic field of the plasma current and Joule heat even if the plasma is cooled by its own radiation at this stage. Such a plasma is needed to produce the lasing (active) medium of a recombination laser based on electron transitions in hydrogen-like ions. At the second stage, it is necessary to rapidly and deeply cool the plasma to 20–40 eV for 1–2 ns. Cooling of the fully ionized expanding plasma was numerically simulated with the discharge current switched on and off by means of a switch with a rapidly rising resistance. In both cases, the plasma expansion in the discharge is not adiabatic. Even after the discharge current is fairly rapidly switched off, heating of electrons continues inside the plasma column for a time longer than the switching time. Discharge current switchoff improves the electron cooling efficiency only slightly. Under such conditions, the plasma cools down to 50–60 eV in the former case and to 46–54 eV in the latter case for 2–3 ns.     

Steady state and transient self-interaction of a laser beam in a strongly ionized moving plasma

The steady state and transient self-interaction of a laser beam with a strongly ionized plasma flowing transverse to the direction of propagation have been investigated by a phenomenological approach using perturbation theory, WKB and paraxial ray approximations. The effect of the transverse motion of the plasma has been included by a convection term in the energy balance equation and is found to result in the non-symmetrical heating of electrons. As a result the beam is shifted towards the direction of transverse flow of the plasma by an amount that increases with the flow velocity. The extent of asymmetry in self-focusing along the transverse directions is, however very small. In a typical case of 7.6×10⁵ watt laser of ω=10⁴ GHz and initial beam widthr ₀=0.05 cm the transverse shiftx _p=0.1r ₀ is predicted in a distance of propagationz=0.34 cm in a strongly ionized plasma of electron densityN _e=10¹⁶ cm^?3 and transverse flow velocityW ₀=10⁷ cm/sec.     

High density plasmas for recombination X-ray lasers

The scaling of recombination XUV lasers to shorter wavelengths requires laser plasmas produced at initial electron densities close to solid. With pump laser pulses longer than a few tens of picoseconds the hydrodynamic motion of the plasma during the interaction makes this difficult to achieve. In contrast, when picosecond laser pulses are used the laser energy is absorbed close to solid density since the plasma expansion is insignificant during the laser pulse. This results in hot near solid density plasmas which are needed for hydrogenic recombination X-ray lasers operating in the water window. Experimental observations have shown that a fully ionized aluminium plasma with a temperature of about 400 eV and a density well above 10²³ cm^–3 is produced when an aluminium target is irradiated with a single 3.5 ps high power KrF laser pulse.