A Versatile and Practical Synthesis of 1,1‐Diacetates from Aldehydes Catalyzed by Cyanuric Chloride

Structurally diverse aldehydes are successfully converted into 1,1‐diacetates with acetic anhydride using cyanuric chloride as a mild, convenient and inexpensive catalyst under solvent‐free conditions. The noteworthy features of the present system are shorter reaction times, and mild and solvent‐free conditions. Furthermore, it offers chemoselective protection of aldehydes.     

P2O5/SiO2 as an Efficient Reagent for Selective Deprotection of 1,1‐Diacetates under Solvent‐Free Conditions

A mild and efficient method has been developed for the selective deprotection of 1,1‐diacetates of aldehydes in excellent yields by means of the P₂O₅/SiO₂ reagent. Advantages of this method are the use of inexpensive and selective reagent, with high yields in simple operation, and short reaction time under solvent‐free conditions.     

Solvent‐Free Preparation of 1,1‐Diacetates from Aldehydes Mediated by Zirconium Hydrogen Sulfate at Room Temperature

A mild and efficient method has been developed for the preparation of acylals in good yields through a reaction of aldehydes with acetic anhydride using Zr(HSO₄)₄ as catalyst at room temperature and under solvent‐free conditions.     

Cupric Sulfate Pentahydrate: A Mild and Efficient Catalyst for the Chemoselective Synthesis of 1,1-Diacetates from Aldehydes in a Solvent-Free System

Summary. Cupric sulfate pentahydrate was found to be an efficient catalyst for the protection of aldehydes as 1,1-diacetates in high yields in a solvent-free system at room temperature. Ketones are not affected under these reaction conditions.     

ZrOCl2 Catalysed Chemoselective Conversion of Aldehydes to geminal-Diacetates and Their Cleavage： A Mild and Efficient Method

ZrOCl2 was found to be an effective Lewis acid catalyst for the solventless chemoselective conversion of aldehydes into geminal-diacetates in high yields at room temperature. Regeneration of the aldehydes from the acetals was also achieved using the same catalyst in water. The beneficial effect of microwave irradiation on the reaction was also described. Other advantages are the very low loading of catalyst, high yields achieved even on a gram scale, and considerably shortened reaction time compared to the conventional method.     

Preparation of Silica‐bonded Propyl‐diethylene‐triamine‐N‐sulfamic Acid as a Recyclable Catalyst for Chemoselective Synthesis of 1,1‐Diacetates

A simple and efficient procedure for the preparation of silica‐bonded propyl‐diethylene‐triamine‐N‐sulfamic acid (SPDTSA) by reaction of 3‐diethylenetriamine‐propylsilica (DTPS) and chlorosulfonic acid in chloroform is described. Silica‐bonded propyl‐diethylene‐triamine‐N‐sulfamic acid is employed as a recyclable catalyst for the synthesis of 1,1‐diacetates from aromatic aldehydes and acetic anhydride under mild and solvent‐free conditions at room temperature. Catalyst could be recycled for several times without any additional treatment.     

A New and Efficient Procedure for the Production of 1,1-Diacetate from Corresponding Aldehydes Promoted by Silica Chromate (SiO2-O-CrO2-O-SiO2)

Abstract

A wide range of aromatic aldehydes has been selectively converted to 1,1-diacetates using silica chromate (SiO₂?O?CrO₂?O?SiO₂) under solvent-free conditions at room temperature in moderate to good yields. This protocol is mild and efficient compared to other reported methods.

GRAPHICAL ABSTRACT     

An Oxidative Rearrangement of 6‐Phenylbicyclo[3.2.0]heptan‐6‐ol to 1,1′‐Biphenyl‐Carbaldehydes: A Mechanistic Study

Acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]heptan‐6‐ol gave 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes in small amounts as well as the expected rearrangement products. A detailed study of the reaction mechanism revealed that the conversion occurs via an oxidative process through the consecutive formation of cycloheptadienes, cycloheptatrienes, and 1,1′‐biphenyls. The acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]hept‐2‐en‐6‐ols gave 1‐ and 2‐phenylcycloheptatrienes directly, from which 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes were obtained by oxidation.     

A Novel Chemoselective Reaction of Aldehydes with 2‐Mercaptoethanol Catalyzed by SiO2‐NaHSO4 under Solvent‐free Condition

An efficient and user‐friendly procedure has been developed for the chemoselective protection of aldehyde carbonyl groups such as bis(2‐hydroxyethyl)dithioacetals with 2‐mercaptoethanol catalyzed by silica‐supported sodium bisulphate under solvent‐free conditions. It has been shown that a variety of aldehydes can expeditiously undergo this reaction to produce their corresponding dithioacetals with impressive yields at room temperature.     

Silica Nanoparticles as a Highly Efficient Catalyst for the One‐Pot Synthesis of 2‐Hydroxyacetamide Derivatives from Isocyanides and Electron‐Poor Aromatic Aldehydes

Reaction of an isocyanide with an electron‐poor aromatic aldehyde in the presence of silica nanoparticles (silica NP; ca. 42 nm) proceeds smoothly at room temperature to afford 2‐hydroxyacetamide derivatives in high yields (Scheme 1 and Table 1).     

Zinc Chloride Anhydrous as New and Effective Catalyst for Conversion of Ketones and Aldehydes to Corresponding Gem‐dihydroperoxides

Zinc chloride anhydrous has been used as an efficient and new catalyst for conversion of ketones and aldehydes to corresponding gem‐dihydroperoxides by aqueous hydrogen peroxide (30%) in room temperature with excellent yields and notable reaction times.     

Theoretical Study on the Intermolecular Interactions between 1,1‐Diamino‐2,2‐Dinitroethylene and H2O

The density functional method was applied to the study of 1,1‐diamino‐2,2‐dinitroethylene (Fox‐7)/H₂O dimer. All the possible dimers ( 1, 2 and 3 ), as well as the monomers, were fully optimized with the DFT method at the B3LYP/6‐311++G^** level. The basis set superposition errors (BSSE) are 4.62, 4.07 and 3.45 kJ/mol, and the zero point energy (ZPE) corrections for the interaction energies are 7.94, 5.66 and 6.40 kJ/mol for 1, 2 and 3 , respectively. Dimer 1 is the most stable, judged by binding energy. After BSSE and ZPE corrections, the greatest corrected intermolecular interaction energy of dimer 1 was predicted to be ?29.36 kJ/mol. The charge redistribution mainly occurs on the adjacent N–H··· O atoms and N–O··· H atoms between submolecules. The oxygen in the nitro group acts as a moderate hydrogen acceptor as compared to water oxygen. Based on the statistical thermodynamic method, the standard thermodynamic functions, heat capacities (C⁰_P), entropies (S⁰_T) and thermal corrections to enthalpy (H⁰_T), and the changes of thermodynamic properties on going from monomer to dimer over the temperature range 200.00‐700.00 K were predicted. It is energetically or thermodynamically favorable for Fox‐7 to bind with H₂O and to form dimer 1 at room temperature.     

Efficient Oxidation of Alcohols to Carbonyl Compounds by N,N‐Dichloro‐4‐Methylbenzenesulfonamide under Mild Conditions

A number of aldehydes and ketones were prepared by oxidation of alcohol by N,N‐dichloro‐4‐methylbenzenesulfonamide under mild and neutral conditions in good to high yield in dichloromethane at room temperature.     

Chloroferrate(III) Ionic Liquid as Recyclable Catalyst for the Acetylation of Alcohols and Phenols and for 1,1‐Diacylation of Aldehydes

A Lewis acidic ionic liquid, [bmim][FeCl₄], was employed to catalyze acetylation of alcohols and phenols, and the conversion of aldehydes to corresponding 1,1‐diacetates without conventional organic solvents. The catalyst is easily available, water‐tolerant, recoverable and easy to handle.     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

A Simple Multistep Conversion of 1,2‐Dihydro‐1,1‐dimethoxynaphthalen‐2‐ones to (3,4‐Dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates

On irradiation (λ=350 nm) in the presence of 1,1‐dimethoxyethene, naphthalene‐1,2‐dionemonoacetals 1 regioselectively afford 1,1,4,4‐tetramethoxycyclobuta[a]naphthalen‐3‐ones 3 . Sequential deprotection of these bis‐acetals first lead to 1,1‐dimethoxycyclobuta[a]naphthalene‐3,4‐diones 4 and then to cyclobuta[a]naphthalene‐1,3,4‐triones 6 , which, in turn, are converted into (3,4‐dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates 7 by treatment with SiO₂/MeOH/air.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

One‐Pot Synthesis of Pyrimidines via Cyclocondensation of β‐Bromovinyl Aldehydes with Amidine Hydrochlorides

A series of pyrimidines were prepared by cyclocondensation of β‐bromovinyl aldehydes with amidine hydrochlorides in the presence of Et₃N in excellent yields (74–95%).