Development of a fast and efficient CE enzyme assay for the characterization and inhibition studies of α‐glucosidase inhibitors

The inhibition of the α‐glucosidase enzyme plays an important role in the treatment of diabetes mellitus. We have established a highly sensitive, fast, and convenient CE method for the characterization of the enzyme and inhibition studies of α‐glucosidase inhibitors. The separation conditions were optimized; the pH value and concentration of the borate‐based separation buffer were optimized in order to achieve baseline separation of p‐nitrophenyl‐α‐d ‐glucopyranoside and p‐nitrophenolate. The optimized method using 25 mM tetraborate buffer, pH 9.5, was evaluated in terms of repeatability, LOD, LOQ, and linearity. The LOD and LOQ were 0.32 and 1.32 μM for p‐nitrophenyl‐α‐d ‐glucopyranoside and 0.83 and 3.42 μM for p‐nitrophenolate, respectively. The value of the Michaelis–Menten constant (K_m) determined for the enzyme is 0.61 mM, which is in good agreement with the reported data. The RSDs (n = 6) for the migration time was 0.67 and 1.83% for substrate and product, respectively. In the newly established CE method, the separation of the reaction analytes was completed in <4 min. The developed CE method is rapid and simple for measuring enzyme kinetics and for assaying inhibitors.     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Expression,Purification and Characterization of Human α‐l‐Fucosidase

α‐l ‐Fucosidases (EC 3.2.1.51) are exo‐glycosidases. On the basis of the multi‐alignment of amino acid sequence, α‐l ‐fucosidases were classified into two families of glycoside hydrolases, GH‐29 and GH‐95. They are responsible for the removal of l ‐fucosyl residues from the non‐reducing end of glycoconjugates. Deficiency of α‐l ‐fucosidase results in Fucosidosis due to the accumulation of fucose‐containing glycolipids, glycoproteins and oligosaccharides in various tissues. Recent studies discovered that the fucosylation levels are increased on the membrane surfaces of many carcinomas, indicating the biological function of α‐l ‐fucosidases may relate to this abnormal cell physiology. Although the gene of human α‐l ‐fucosidase (h‐fuc) was cloned, the recombinant enzyme has rarely been overexpressed as a soluble and active from. We report herein that, with carefully control on the growing condition, an active human α‐l ‐fucosidases (h‐Fuc) was successfully expressed in Escherichia coli for the first time. After a series steps of ion‐exchange and gel‐filtration chromatographic purification, the recombinant h‐Fuc with 95% homogeneity was obtained. The molecular weight of the enzyme was analyzed by SDS‐PAGE (～50 kDa) and confirmed by ESI mass (50895 Da). The recombinant h‐Fuc was stable up to 55 °C with incubation at pH 6.8 for 2 h; the optimum temperature for h‐Fuc is approximately 55 °C. The enzyme was stable at pH 2.5–7.0 for 2 h; the enzyme activity decreased greatly for pH greater than 8.0 or less than 2.0. The K_m and k_cat values of the recombinant h‐Fuc (at pH 6.8) were determined to be 0.28 mM and 17.1 s^?1, respectively. The study of pH‐dependent activity showed that the recombinant enzyme exhibited optimum activity at two regions near at pH 4.5 and pH 6.5. These features of the recombinant h‐Fuc are comparable to the native enzyme purified directly from human liver. Studies on the transfucosylation and common intermediate of the enzymatic reaction by NMR support that h‐Fuc functions as a retaining enzyme catalyzing the hydrolysis of substrate via a two‐step, double displacement mechanism.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Conformational analysis of the disaccharide methyl α‐d‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d‐mannopyranoside monohydrate

The crystal structure of methyl α‐d ‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₆O₁₂·H₂O, ( II ), has been determined and the structural parameters for its constituent α‐d ‐mannopyranosyl residue compared with those for methyl α‐d ‐mannopyranoside. Mono‐O‐acetylation appears to promote the crystallization of ( II ), inferred from the difficulty in crystallizing methyl α‐d ‐mannopyranosyl‐(1→3)‐β‐d ‐mannopyranoside despite repeated attempts. The conformational properties of the O‐acetyl side chain in ( II ) are similar to those observed in recent studies of peracetylated mannose‐containing oligosaccharides, having a preferred geometry in which the C2—H2 bond eclipses the C=O bond of the acetyl group. The C2—O2 bond in ( II ) elongates by ～0.02 Å upon O‐acetylation. The phi (?) and psi (ψ) torsion angles that dictate the conformation of the internal O‐glycosidic linkage in ( II ) are similar to those determined recently in aqueous solution by NMR spectroscopy for unacetylated ( II ) using the statistical program MA′AT, with a greater disparity found for ψ (Δ = ～16°) than for ? (Δ = ～6°).     

Catalytic Asymmetric Construction of Quaternary α‐Amino Acid Containing Pyrrolidines through 1,3‐Dipolar Cycloaddition of Azomethine Ylides to α‐Aminoacrylates

The first catalytic enantioselective 1,3‐dipolar cycloaddition of azomethine ylides to α‐aminoacrylate catalyzed by a AgOAc/ferrocenyl oxazolinylphosphine (FOXAP) system was developed, which exhibits excellent exo‐ and enantioselectivity (92–99 % ee). This process provides efficient access to useful 4‐aminopyrrolidine‐2,4‐dicarboxylic acid (APDC)‐like compounds containing a unique quaternary α‐amino acid unit.     

Organocatalytic Enantioselective Synthesis of Tetrasubstituted α‐Amino Allenoates by Dearomative γ‐Addition of 2,3‐Disubstituted Indoles to β,γ‐Alkynyl‐α‐imino Esters

The first asymmetric synthesis of tetrasubstituted α‐amino allenoates by a chiral phosphoric acid catalyzed dearomative γ‐addition reaction of 2,3‐disubstituted indoles to β,γ‐alkynyl‐α‐imino esters is reported. This method provides access to a series of highly functionalized tetrasubstituted allenes featuring quaternary stereocenters in high yields, and with excellent regio‐, diastereo‐, and enantioselectivities under mild conditions without by‐product formation. Representative large‐scale reactions and diverse transformations of the products into various scaffolds with potential biological activities render are also disclosed. The mechanism of the reaction was elucidated by control reactions and DFT calculations.     

Enantioselective Palladium‐Catalyzed Insertion of α‐Aryl‐α‐diazoacetates into the OH Bonds of Phenols

A palladium‐catalyzed asymmetric O? H insertion reaction was developed. Palladium complexes with chiral spiro bisoxazoline ligands promoted the insertion of α‐aryl‐α‐diazoacetates into the O? H bond of phenols with high yield and excellent enantioselectivity under mild reaction conditions. This palladium‐catalyzed asymmetric O? H insertion reaction provided an efficient and highly enantioselective method for the preparation of synthetically useful optically active α‐aryl‐α‐aryloxyacetates.     

cis‐trans Peptide‐Bond Isomerization in α‐Methylproline Derivatives

α‐Methyl‐L ‐proline is an α‐substituted analog of proline that has been previously employed to constrain prolyl peptide bonds in a trans conformation. Here, we revisit the cis‐trans prolyl peptide bond equilibrium in derivatives of α‐methyl‐L ‐proline, such as N‐Boc‐protected α‐methyl‐L ‐proline and the hexapeptide H‐Ala‐Tyr‐αMePro‐Tyr‐Asp‐Val‐OH. In Boc‐α‐methyl‐L ‐proline, we found that both cis and trans conformers were populated, whereas, in the short peptide, only the trans conformer was detected. The energy barrier for the cis‐trans isomerization in Boc‐α‐methyl‐L ‐proline was determined by line‐shape analysis of NMR spectra obtained at different temperatures and found to be 1.24 kcal/mol (at 298 K) higher than the corresponding value for Boc‐L ‐proline. These findings further illuminate the conformationally constraining properties of α‐methyl‐L ‐proline.     

NMR Spectroscopic Analysis Reveals Extensive Binding Interactions of Complex Xyloglucan Oligosaccharides with the Cellvibrio japonicus Glycoside Hydrolase Family 31 α‐Xylosidase

The study of the interaction of glycoside hydrolases with their substrates is fundamental to diverse applications in medicine, food and feed production, and biomass‐resource utilization. Recent molecular modeling of the α‐xylosidase CjXyl31A from the soil saprophyte Cellvibrio japonicus, together with protein crystallography and enzyme‐kinetic analysis, has suggested that an appended PA14 protein domain, unique among glycoside hydrolase family 31 members, may confer specificity for large oligosaccharide fragments of the ubiquitous plant polysaccharide xyloglucan (J. Larsbrink, A. Izumi, F. M. Ibatullin, A. Nakhai, H. J. Gilbert, G. J. Davies, H. Brumer, Biochem. J. 2011 , 436, 567–580). In the present study, a combination of NMR spectroscopic techniques, including saturation transfer difference (STD) and transfer NOE (TR‐NOE) spectroscopy, was used to reveal extensive interactions between CjXyl31A active‐site variants and xyloglucan hexa‐ and heptasaccharides. The data specifically indicate that the enzyme recognizes the entire cello‐tetraosyl backbone of the substrate and product in positive enzyme subsites and makes further significant interactions with internal pendant α‐(1→6)‐linked xylosyl units. As such, the present analysis provides an important rationalization of previous kinetic data on CjXyl31A and unique insight into the role of the PA14 domain, which was not otherwise obtainable by protein crystallography.     

Catalytic Asymmetric 1,2‐Addition of α‐Isothiocyanato Phosphonates: Synthesis of Chiral β‐Hydroxy‐ or β‐Amino‐Substituted α‐Amino Phosphonic Acid Derivatives

α‐Amino phosphonic acid derivatives are considered to be the most important structural analogues of α‐amino acids and have a very wide range of applications. However, approaches for the catalytic asymmetric synthesis of such useful compounds are very limited. In this work, simple, efficient, and versatile organocatalytic asymmetric 1,2‐addition reactions of α‐isothiocyanato phosphonate were developed. Through these processes, derivatives of β‐hydroxy‐α‐amino phosphonic acid and α,β‐diamino phosphonic acid, as well as highly functionalized phosphonate‐substituted spirooxindole, can be efficiently constructed (up to 99 % yield, d.r. >20:1, and >99 % ee). This novel method provides a new route for the enantioselective functionalization of α‐phosphonic acid derivatives.     

Polymerization of α‐amino acid N‐carboxyanhydrides catalyzed by rare earth tris(borohydride) complexes: Mechanism and hydroxy‐endcapped polypeptides

In this work, rare earth tris(borohydride) complexes, Ln(BH₄)₃(THF)₃ (Ln = Sc, Y, La, and Dy), have been used to catalyze the ring‐opening polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG NCA). All the catalysts show high activities and the resulting poly(γ‐benzyl‐L ‐glutamate)s (PBLGs) are recovered with high yields (≥90%). The molecular weights (MWs) of PBLG can be controlled by the molar ratios of monomer to catalyst, and the MW distributions (MWDs) are relatively narrow (as low as 1.16) depending on the rare earth metals and reaction temperatures. Block copolypeptides can be easily synthesized by the sequential addition of two monomers. The obtained P(γ‐benzyl‐L ‐glutamate‐b‐ε‐carbobenzoxy‐L ‐lysine) [P(BLG‐b‐BLL)] and P(γ‐benzyl‐L ‐glutamate‐b‐alanine) [P(BLG‐b‐ALA)] have been well characterized by NMR, gel permeation chromatography, and differential scanning calorimetry measurements. A random copolymer P(BLG‐co‐BLL) with a narrow MWD of 1.07 has also been synthesized. The polymerization mechanisms have been investigated in detail. The results show that both nucleophilic attack at the 5‐CO of NCA and deprotonation of 3‐NH of NCA in the initiation process take place simultaneously, resulting in two active centers, that is, an yttrium ALA carbamate derivative [H₂BOCH₂(CH)NHC(O)OLn? ] and a N‐yttriumlated ALA NCA. Propagation then proceeds on these centers via both normal monomer insertion and polycondensation. After termination, two kinds of telechelic polypeptide chains, that is, α‐hydroxyl‐ω‐aminotelechelic chains and α‐carboxylic‐ω‐aminotelechelic ones, are formed as characterized by MALDI‐TOF MS, ¹H NMR, ¹³C NMR, ¹H–¹H COSY, and ¹H–¹³C HMQC measurements. By decreasing the reaction temperature, the normal monomer insertion pathway can be exclusively selected, forming an unprecedented α‐hydroxyl‐ω‐aminotelechelic polypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Supramolecular polyseudorotaxanes formation between star‐block copolymer and α‐cyclodextrin: From outer block to diblock inclusion complexation

A series of star‐block poly(L ‐lactide)‐b‐poly(ethylene oxide) (SPLLA‐b‐PEO) copolymers were synthesized by ring‐opening polymerization (ROP) and DCC chemistry. The inclusion complexes of SPLLA‐b‐PEO copolymers and α‐cyclodextrin (α‐CD) were prepared with two different methods. FTIR, ¹H NMR, WAXD, DSC, and TGA indicate that α‐CD only can be threaded onto PEO blocks in inclusion complexes of α‐CD‐SPLLA‐b‐PEO1.1K‐a, α‐CD‐SPLLA‐b‐PEO2K‐a, and α‐CD‐SPLLA‐b‐PEO5K‐a formed without heating and ultrasonication, and can be threaded onto both PLLA and PEO blocks in inclusion complexes of α‐CD‐SPLLA‐b‐PEO1.1K‐b, α‐CD‐SPLLA‐b‐PEO2K‐b, and α‐CD‐SPLLA‐b‐PEO5K‐b formed with heating and ultrasonication. Namely, α‐CDs can be threaded onto PEO blocks and the flanking bulky PLLA blocks of star‐block copolymers to form stable polyseudorotaxanes with heating method and ultrasonication to conquer the activation energy barrier of the inclusion complexation between bulky PLLA and α‐CD and the effect of the steric hindrance of star‐block copolymers. With the alteration of preparing methods, the inclusion complexes of α‐CD with the outer PEO block or PEO and PLLA blocks were obtained successfully. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2754–2762, 2009     

On‐line high‐performance liquid chromatography coupled with biochemical detection method for screening of α‐glucosidase inhibitors in green tea

An on‐line high‐performance liquid chromatography–biochemical detection (HPLC‐BCD) method, in which compounds separated by HPLC were on‐line reacted with enzyme and substrate solutions delivered by flow injection and the enzyme inhibition signal was collected by UV detection, was developed to rapidly screen α‐glucosidase inhibitors from green tea extracts in this study. The chromatographic fingerprints and enzyme inhibition profiles of the different brands of green tea could be simultaneously detected by the on‐line HPLC‐BCD method. Enzyme inhibition profiles were detected by the UV detector at 415 nm based on the reaction of α‐glucosidase and p‐nitrophenyl α‐d ‐glucopyranoside (PNPG). PNPG (1.25 mm ), α‐glucosidase (0.4 U/mL) and the flow rate 0.07 mL/min were applied as optimized parameters to detect α‐glucosidase inhibitors in green tea. Four components in green tea showed α‐glucosidase inhibition action and three of them were identified as HHDP‐galloyl glucose, (−)‐epigallocatechin‐3‐gallate and (−)‐epicatechin‐3‐gallate by HPLC–fourier‐transform mass spectrometry (HPLC‐FTMS). Two brands of green tea derived from Mengding and Enshi mountainous areas might be superior to the other samples in the prevention and treatment of diabetes owing to their stronger activities of enzyme inhibitors. The proposed on‐line HPLC‐BCD method could be used to rapidly identify the potential enzyme inhibitors in complex matrixes.     

Convenient synthesis of poly(γ‐benzyl‐L‐glutamate) from activated urethane derivatives of γ‐benzyl‐L‐glutamate

A series of activated urethane‐type derivatives of γ‐benzyl‐L ‐glutamate were synthesized, and their potential as monomers for polypeptide synthesis was investigated. The derivatives of the focus of this work were a series of N‐aryloxycarbonyl‐γ‐benzyl‐L ‐glutamate 1 , of which aryl groups were phenyl, 4‐chlorophenyl, and 4‐nitrophenyl. These urethanes 1 were reactive in polar solvents such as dimethylsulfoxide, N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc), and were efficiently converted into poly(γ‐benzyl‐L ‐glutamate) (poly(BLG)) under mild conditions; at 60 °C without addition of any catalyst. Among the three urethanes, that having 4‐nitrophenoxycarbonyl group 1c was the most reactive to give poly(BLG) efficiently, as was expected from the highly electron deficient nature of the nitrophenoxycarbonyl group. On the other hand, the urethane 1a having phenoxycarbonyl group was also efficiently converted into poly(BLG), in spite of the intrinsically less electrophilicity of the phenoxycarbonyl group. In addition, the successful formation of poly(BLG) by the reaction of 1a favored its diluted concentration (0.1 M) much more than 2.0 M, the optimum initial concentration for 1c . ¹H NMR spectroscopic analyses of the reactions in situ revealed that the predominant pathway from 1 to poly(BLG) involved the intramolecular cyclization of 1 into the corresponding N‐carboxyanhydride, with release of phenol and its successive ring‐opening polymerization with release of carbon dioxide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2649–2657, 2008     

Polycondensation of α‐amino acid esters in the presence of yttrium triflate as a Lewis acid

To develop polycondensation methods for poly(α‐amino acid)s, we describe a first examination to use yttrium triflate as a Lewis acid for polycondensation of α‐amino acid esters. In the absence of Lewis acid, no polycondensation of 2‐methoxyphenyl glycinate ( 1b ) at room temperature proceeded. While the polycondensation of 1b was carried out with 5 mol % yttrium triflate, a condensation product of glycine was obtained in 16% yield. Although polycondensation of 4‐nitrophenyl L ‐leucinate ( 1c ) and 4‐nitrophenyl L ‐valinate ( 1d ) were also promoted with 5 mol % yttrium triflate, the condensation products of both α‐amino acid esters were obtained in only a few percent yield. When 1d was polymerized in the presence of 100 mol % yttrium triflate, high molecular weight poly(L ‐valine) was obtained in 91% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4731–4735, 2006     

Catalytic Asymmetric Intramolecular Homologation of Ketones with α‐Diazoesters: Synthesis of Cyclic α‐Aryl/Alkyl β‐Ketoesters

A catalytic asymmetric intramolecular homologation of simple ketones with α‐diazoesters was firstly accomplished with a chiral N,N′‐dioxide–Sc(OTf)₃ complex. This method provides an efficient access to chiral cyclic α‐aryl/alkyl β‐ketoesters containing an all‐carbon quaternary stereocenter. Under mild conditions, a variety of aryl‐ and alkyl‐substituted ketone groups reacted with α‐diazoester groups smoothly through an intramolecular addition/rearrangement process, producing the β‐ketoesters in high yield and enantiomeric excess.     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.