Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

A Copper(II) Ion‐Selective Potentiometric Sensor Based on N,N′,N″,N′′′‐Tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane in PVC Matrix

The simple PVC‐based membrane containing N,N′,N″,N′′′‐tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane (tpmc) as an ionophore and dibutyl phthalate as a plasticizer, directly coated on a glassy carbon electrode was examined as a new sensor for Cu²⁺ ions. The potential response was linear within the concentration range of 1.0×10^?1–1.0×10^?6 M with a Nernstian slope of 28.8 mV/decade and detection limit of 7.0×10^?7 M. The electrode was used in aqueous solutions over a wide pH range (1.3–6). The sensor exhibited excellent selectivity for Cu²⁺ ion over a number of cations and was successfully used in its determination in real samples.     

N,N,N′,N′,N″‐penta(methyl acrylate)diethylenetriamine: A novel ligand for atom transfer radical polymerization of methyl methacrylate

A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA₅‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA₅‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA₅‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (M_w/M_n's) of 1.16–1.29. The polymerization with the system CuBr/MA₅‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with M_w/M_n = 1.35–1.53. The solution polymerization in anisole with CuBr/MA₅‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr₂ into the aforementioned system can further improve its controllability. The M_w/M_n's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004     

Synthesis and characterization of soluble aromatic polyurea-amides from new N,N′--dimethyl-N,N′-bis(aminophenyl)ureas and aromatic dicarboxylic acid chlorides

Aromatic polyurea-amides having inherent viscosities of 0.36–0.67 dL/g were synthesized by the low temperature solution polycondensation of new N,N′-dimethyl-N,N′-bis(aminophenyl)ureas with various aromatic dicarboxylic acid chlorides. All the polymers were amorphous, and most of them were soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), m-cresol, and pyridine. Some of the polymers could be cast from the DMAc solutions into transparent and flexible films having good tensile properties. The glass transition temperatures of the polyurea-amides obtained from the bis(4-aminophenyl)-substituted ureas were 244–272°C. The temperatures of 10% weight loss under nitrogen of the polymers were in the range of 430 and 480°C. © 1995 John Wiley & Sons, Inc.     

Synthesis of N,N′,X‐tridentate 2‐iminomethylpyrrole‐coordinated palladium(II) complexes via N─H bond activation of pyrrole moiety

The reaction of [Pd(CH₃CN)₂Cl₂] with N ‐functional group‐substituted 2‐iminomethylpyrrole‐based ligands, namely N ¹‐((1H‐pyrrol‐2‐yl)methylene)‐N ³,N ³‐dimethylpropane‐1,3‐diamine (L_A), N ¹‐((1H‐pyrrol‐2‐yl)methylene)‐N ³‐methyl‐N ³‐phenylpropane‐1,3‐diamine (L_B), N ‐((1H‐pyrrol‐2‐yl)methylene)‐3‐(methylthio)propan‐1‐amine (L_C) and N ‐((1H‐pyrrol‐2‐yl)methylene)‐3‐methoxypropan‐1‐amine (L_D), resulted in [L_n PdCl] (L_n  = L_A–L_D) complexes in high yield via N─H bond activation of pyrrole moiety without use of base. [L_n PdCl] existed as monomeric four‐coordinated complexes with slightly distorted square planar geometries around the palladium metal center. The ligands show N ,N ′,X ‐tridentate binding mode to the palladium metal center to give two fused ring metallacycles. [L_BPdCl] gave the highest activity (3.29 × 10⁵ g PMMA (mol Pd)⁻¹ h⁻¹) for a methyl methacrylate (MMA) polymerization in the presence of modified methylaluminoxane at 60 °C compared to the other Pd(II) analogues, and resulted in PMMA with higher molecular weight (M _w = 7.16 × 10⁵ g mol⁻¹) and narrower polydispersity index. Syndiotactic‐enriched PMMA resulted in all cases.     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

Complexes of diorganotin(IV) dihalides with N,N′-dimethyl-2, 2′-bisimidazole

Adducts of N, N′ -dimethyl-2, 2′-bisimidazole (DMBIm) with diethyl- and dibutyl-tin(IV) dihalides (Cl, Br) have been isolated and characterized. IR data for [SnR₂X₂(DMBIm)] compounds are in keeping with a six-coordinate tin atom with DMBIm acting as a bidentate ligand, whereas in [(SnR₂X₂)₂(DMBIm)] the tin is five-coordinate and DMBIm acts as a bridging ligand. Measurements of conductivity in acetonitrile show the adducts to behave as non-ionogens in this solvent. NMR data show them to undergo dissociation in CDCl₃.     

Accelerating effects of N‐aryl‐N′,N′‐dialkyl ureas on epoxy‐dicyandiamide curing system

This report focuses on epoxy‐dicyandiamide (DICY) curing system accelerated by N‐aryl‐N′,N′‐dialkyl urea, aiming at clarifying the accelerating mechanism and the relationship between accelerating effect and molecular structure of the accelerators. Nine N‐aryl‐N′,N′‐dialkyl ureas were synthesized and investigated with measurements of differential scanning calorimetry, thermo gravimetric/differential thermal analysis and NMR spectroscopy. The results revealed that the ureas released the corresponding secondary amines by the thermal dissociation in the presence of epoxide, which led to the formation of tertiary amines that catalyze the addition reaction of DICY to epoxide. Moreover, a tendency that the ureas able to release more compact amines exhibited higher acceleration effects was discovered. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Crystal structure of (N,N,N′,N′-tetramethyl-1,2-diaminoethane)(1,1,1-trifluoro-6-methyl-2,4-heptanedionato)copper(II) perchlorate

The solvatochromic compound [Cu(tfmh)Me₄en]ClO₄ (tfmh^? denotes the anion of 1,1,1-trifluoro-6-methyl-2,4-heptanedione) was prepared and its structure has been determined from three-dimensional X-ray diffraction data. The structure consists of discrete [Cu(tfmh)Me₄en]⁺ monomeric units and perchlorate ions. The copper(II) ion is surrounded by the two nitrogen atoms of the diamine molecule and the two oxygen atoms of the β-dionato anion. The N,N,N′,N′-tetramethyl-1,2-diaminoethane, Me₄en, coordinates as bidentate ligand through the nitrogen atoms and adopts the gauche conformation and λ configuration. The CuN₂O₂ chromophore is virtually planar. The compound crystallizes in the monoclinic system (space group P2₁/c) with a = 11.9520(2), b = 14.6600(2), c = 17.2240(4) Å, β = 135.72(2)°, Z = 4 and V = 2107.01(7) ų.     

Chiral N,N′‐Dioxide‐Organocatalyzed Regio‐, Diastereo‐ and Enantioselective Michael Addition–Alkylation Reaction

A highly regio‐, diastereo‐ and enantioselective Michael addition–alkylation reaction between α‐substituted cyano ketones and (Z)‐bromonitrostyrenes has been realized by using a chiral N,N′‐dioxide as organocatalyst. A variety of substrates performed well in this reaction, and the corresponding multifunctionalized chiral 2,3‐dihydrofurans were obtained in up to 95 % yield with 95:5 dr and 93 % ee.     

Solvent‐free Synthesis of 1,8‐Dioxo‐octahydroxanthenes and Tetra‐hydrobenzo[a]xanthene‐11‐ones over Poly(N,N′‐dibromo‐N‐ethylnaphtyl‐2,7‐sulfonamide)

In this work, poly(N,N ′‐dibromo‐N ‐ethylnaphtyl‐2,7‐sulfonamide) (PDNES ) as a highly efficient catalyst was applied for the synthesis of 1,8‐dioxo‐octahydroxanthenes and tetra‐hydrobenzo[a]xanthene‐11‐ones under neutral and solvent‐free conditions.     

1H and 13C NMR signal assignments of some new N,N′‐diacyl proflavine derivatives

The complete ¹H and ¹³C NMR signal assignments of 23 new N,N′‐diacyl proflavine derivatives were achieved using one‐ and two‐dimensional experiments (DEPT, HMQC and HMBC). Copyright © 2009 John Wiley & Sons, Ltd.     

Polyamides based on diamines and N,N′-dimethyldiamines derived from biphenol

Aromatic-aliphatic polyamides containing a biphenyl mesogen were prepared by both interfacial and solution polymerization reactions. Substitution of the amide nitrogen with methyl groups yielded polymers with significantly different properties than the unsubstituted polyamides. The methyl-substituted polyamides had improved thermal stability, significantly lower meltin temperatures, and greater solubility in common solvents. Copolyamides were also synthesized which contained different flexible spacer units that varied in the number of methylene groups. No evidence for the presence of liquid crystalline phases could be obtained in either the unsubstituted polyamides or polyamides containing N-methylated amide units. © 1994 John Wiley & Sons, Inc.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

A Chiral N,N′‐Dioxide–ZnII Complex Catalyzes the Enantioselective [2+2] Cycloaddition of Alkynones with Cyclic Enol Silyl Ethers

A highly efficient enantioselective [2+2] cycloaddition between alkynones and cyclic enol silyl ethers was developed by using a chiral N,N′‐dioxide‐zinc(II) complex as a catalyst. This method functions well for a variety of terminal alkynes as well as cyclic enol silyl ethers, with good to excellent enantioselectivity (up to 97 % ee). This is also the first successful example for the catalytic enantioselective [2+2] cycloaddition of internal alkynes with cyclic enol silyl ethers to give fully substituted cyclobutenes. Meanwhile, the desired cyclobutene product can easily be transformed into fused cyclobutane derivatives.     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Preparation and evaluation of a hydrophilic poly(2‐hydroxyethyl methacrylate‐co‐N,N′‐methylene bisacrylamide) monolithic column for pressurized capillary electrochromatography

A polar polymethacrylate‐based monolithic column was introduced and evaluated as a hydrophilic interaction CEC stationary phase. The monolithic stationary phase was prepared by in situ copolymerization of a neutral monomer 2‐hydroxyethyl methacrylate and a polar cross‐linker N,N′‐methylene bisacrylamide in a binary porogenic solvent consisting of dodecyl alcohol and toluene. The hydroxyl and amino groups at the surface of the monolithic stationary phase provided polar sites which were responsible for hydrophilic interactions. The composition and proportion of the polymerization mixture was investigated in detail. The mechanical stability and reproducibility of the obtained monolithic column preformed was satisfied. The effects of pH and organic solvent content on the EOF and the separation of amines, nucleosides, and narcotics on the optimized monolithic column were investigated. A typical hydrophilic interaction CEC was observed on the neutral polar stationary phase. The optimized monolithic column can obtain high‐column efficiencies with 62 000–126 000 theoretical plates/m and the RSDs of column‐to‐column (n = 9), run‐to‐run (n = 5), and day‐to‐day (n = 3) reproducibility were less than 6.3%. The calibration curves of these five narcotics exhibited good linearity with R in the range of 0.9959–0.9970 and linear ranges of 1.0–200.0 μg/mL. The detection limits at S/N = 3 were between 0.2 and 1.2 μg/mL. The recoveries of the separation of narcotics on the column were in the range of 84.0–108.6%. The good mechanical stability, reproducibility, and quantitation capacity was suitable for pressure‐assisted CEC applications.     

Determination of Solvatochromic Regression Coefficients for the Molybdenum(VI) Complex with Ethylenediamine‐N,N′‐diacetic Acid by Using Kamlet‐Abboud‐Taft Equation

The Solver, Microsoft Excel 2000 powerful optimization package, has been used to perform non‐linear least‐squares curve fitting on the basis of Gauss‐Newton method for the calculation of solvatochromic regression coefficients for the complexation of molybdenum(VI) with ethylenediamine‐N,N′‐diacetic acid and dissociation constants at 25°C and constant ionic strength 0.1 mol·L⁻¹ sodium perchlorate in different aqueous solutions of methanol. A combination of potentiometric and UV spectrophotometric methods have been used for experimental studies. Non specific and specific solute‐solvent interactions were interpreted by correlating the equilibrium data with solvent parameters using the Kamlet‐Abboud‐Taft solvatochromic equation. Finally the influence of the solvent on the stability of the complex was discussed on the basis of the correlation results and the contribution of α (hydrogen‐bond donor acidity), β (hydrogen‐bond acceptor basicity) and π* (dipolarity/polarizability) parameters.     

Tetra(N,N′‐tetramethylharnstoff)‐Beryllium‐Triiodid, [Be(TMH)4](I3)2

Tetra(N,N′‐tetramethylurea)‐beryllium‐triiodide, [Be(TMU)₄](I₃)₂ ( 1 ) was prepared from beryllium powder and iodine in N,N′‐tetramethylurea to give orange crystals, which were characterized by X‐ray diffraction and IR spectroscopy. Compound 1 crystallizes monoclinically in the space group C2/c with four formula units per unit cell. Lattice dimensions at 100(2) K: a = 1906.6(1), b = 1185.7(1), c = 1895.0(1) pm, β = 113.60(1) °, R₁ = 0.0291. The structure of 1 consists of distorted tetrahedral cations [Be(TMU)₄]²⁺ with Be–O bond lengths of 162.5(5) and 160.8(5) pm and triiodide ions without site symmetry.     

N,N′‐Bis(arylmethylidene)arylmethanediamines: Suitable Precursors for the Synthesis of 1‐Pyrroline Derivatives

A simple and appropriate procedure for the synthesis of 4,5‐dihydro‐5‐hydroxy‐3H‐pyrrole‐3,3‐dicarbonitrile derivatives is reported. The advantages of this method are one‐pot conditions, high yield of products, short reaction times, and no need of metal catalyst. The structures are confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).