Interactions of the ethanolamino groups of nanofilms with Co(II), Ni(II), Cu(II), Zn(II), and Cr(III) ammoniates at the surface of PVC plates

Interactions of nanofilms containing ethanolamino groups with cobalt(II), nickel(II), copper(II), and zinc(II) ammoniates at the surface of polyvinylchloride plates and with chromium(III) ammoniate in a solution of ammonium chloride were studied. It was found that the groups of the film, together with chloride ions, displace all ammonia molecules from the inner coordination sphere of the metal. The average number of the ethanolamino N atoms of the film participating in formation of the metal ion coordination sphere is 3.35, 3.47, 3.67, 3.42, and 3.37 for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cr³⁺ complexes, respectively. The average number of chloride ions is 2 for Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ and 3 for Cr³⁺. The coordination number of the central atoms is 6. The Cr³⁺ ion forms a coordination sphere composed of three N atoms and three chloride ions and a coordination sphere (charged 1+) made up of four N atoms and two chloride ions, with the third chloride ion being in the outer sphere. The Co²⁺, Ni²⁺, and Cu²⁺ ions form uncharged coordination spheres of two types: (1) with four N atoms and two chloride ions and (2) with three N atoms, two chloride ions, and the O atom of the ethanol hydroxyl group.     

Complexation of poly(ethyleneimine) with copper(II) and nickel(II) ions in 0.5 M KNO3 solution

Complexation of poly(ethyleneimine) (PEI) with copper(II) and nickel(II) ions was studied in a 0.5M aqueous KNO₃ solution. The potentiometrically determined logarithm of the three successive formation constants (log k_J) were 8.14, 7.96, and 7.37 for Cu⁺²-PEI complexation and 6.74, 6.52, and 6.23 for Ni⁺²–PEI complexation at 25°C, according to Bjerrum's modified method. The maximum average coordination number was 3.2 for the Cu⁺²–PEI system and 3.7 for the Ni⁺²–PEI system. An entropy effect was observed in the third coordination. The wavelengths of maximum absorption of the complexes and the continuous variation method showed that at least two coordination sites of Cu⁺² ion and three coordination sites of Ni⁺² ion were occupied immediately by PEI as the solutions of PEI and the metal ions were mixed.     

Preparation of Cu (II) imprinted polymer electrode and its application for potentiometric and voltammetric determination of Cu (II)

The Cu (II) imprinted polymer glassy carbon electrode (GCE/Cu-IP) was prepared by electropolymerization of pyrrole at GCE in the presence of methyl red as a dopant and then imprinting by Cu²⁺ ions. This electrode was applied for potentiometric and voltammetric detection of Cu²⁺ ion. The potentiometric response of the electrode was linear within the Cu²⁺ concentration range of 3.9 × 10^?6 to 5.0 × 10^?2 M with a near-Nernstian slope of 29.0 mV decade^?1 and a detection limit of 5.0 × 10^?7 M. The electrode was also used for preconcentration anodic stripping voltammetry and results exhibited that peak currents for the incorporated copper species were dependent on the metal ion concentration in the range of 1.0 × 10^?8 to 1.0 × 10^?3 M and detection limit was 6.5 × 10^?9 M. Also the selectivity of the prepared electrode was investigated. The imprinted polymer electrode was used for the successful assay of copper in two standard reference material samples.     

Sorption selectivity of cobalt(II), nickel(II), and copper(II) ions by KB-2E macroreticular carboxylic cation exchanger from aqueous-salt solutions of alkali metals

Sorption selectivity of copper(II), nickel(II), and cobalt(II) ions by KB-2E macroreticular carboxylic cation exchanger in the Na-form from dilute solutions was studied in the target concentration range (0.52.6) 103 M. The equilibrium distribution coefficients of Co²⁺, Ni²⁺, and Cu²⁺ were calculated. The role played by hydration of ions in their sorption by KB-2E cation exchangers is analyzed with consideration for IR spectroscopic, thermal analysis, and scanning electron microscopic data.     

Nickel(II) Ion-Selective Electrode Based on 2,5-Thiophenyl bis(5-tert-Butyl-1,3-Benzoxazole

ABSTRACT

A PVC membrane sensor for Nickel (II) ions based on 2,5-thiophenyl bis(5-tert-butyl-1,3-benzoxazole) as membrane carrier was prepared. The sensor exhibits a Nernstian response for Ni²⁺ ions over a wide concentration range (10^?2–10^?5M). It has a relatively fast response time and can be used for at least 2 months without any considerable divergence in potentials. The nature of the plasticizer, the additive, the concentration of internal solutions in the electrodes and the composition of the membrane were investigated. The proposed membrane electrode revealed very good selectivities for Ni²⁺ over a wide variety of other metal cations and could be used in pH range of 4.0–8.0. It was successfully applied for the direct determination of Ni²⁺ in solution and as an indicator electrode in potentiometric titration of nickel ion in both water and 85% acetonitrile solutions.     

Simultaneous Determination of Cobalt and Nickel Using Morpholinedithiocarbamate (MDTC) as Reagent by First and Second Derivative Spectrophotometry

A selective and sensitive derivative method has been proposed for the simultaneous determination of trace amounts of Co(II) and Ni(II) with morpholinedithiocarbamate (MDTC) in the presence of sodium lauryl sulphate (SLS). The molar absorption coefficients of the 1:2 complex of Co(II) and Ni(II) at 326 nm and 322 nm are 2.248 × 10⁴ and 2.505 × 10⁴ L mol^?1 cm^?1 for zero order. The analytical sensitivity for the second derivative of Co(II) and Ni(II) complexes are 0.0044 μg mL^?1 and 0.0060 μg mL^?1. The developed derivative procedure, using the zero‐crossing technique, has been successfully applied for the analysis of Co(II) and Ni(II) simultaneously in different alloy samples.     

Novel Copper(II)‐Selective Membrane Electrode Based on a New Synthesized Schiff Base

A PVC membrane electrode for copper(II) ion based on a recently synthesized Schiff base as a suitable ion carrier was constructed. The electrode exhibits a Nernstian slope of 28.3 ± 0.6 mV per decade of Cu²⁺ over a wide concentration range of 7.0 × 10^?6‐2.6 × 10^?2 M with a detection limit of 5.0 × 10^?6M in the pH range of 4.2–5.8. The response time is about 10s and it can be used for at least 1 month without any considerable divergence in potential. It was successfully applied as an indicator electrode in the potentiometric titration of copper ions.     

Potentiometric Characterization of Telomerase Activity Using a Copper(ii)-pyrophosphate Complex with a Copper ion-selective Electrode

A novel potentiometric sensing platform was designed for real-time electronic monitoring of telomerase activity using a copper(II) ion-selective electrode (Cu-ISE). The target-induced coordination of pyrophosphate ion with copper ion (Cu²⁺) was utilized for the detection of the enzyme activity. Upon telomerase introduction, a DNA primer was elongated in the presence of deoxyribonucleoside triphosphates, accompanying formation of the by-product (pyrophosphate ion; P₂O₇^4-). The generated pyrophosphate ions chemically coordinated with free copper ions to form the copper(II)-pyrophosphate complex, thereby resulting in a decrease in the number of free copper ions present in solution. With the addition of telomerase, the electrode potential on the Cu-ISE increased relative to the background signal. The results indicated that the copper(II)-pyrophosphate system exhibited good potentiometric response for the detection of telomerase activity, and allowed the determination of the analyte in HeLa cell extract at concentrations as low as 36 cells mL^?1. Moreover, the Cu-ISE-based sensing platform afforded good reproducibility, thus representing a useful approach for practical use in quantitative telomerase activity assays.     

Spectrophotometric determination of cobalt(II) based on the ion-pair of tetrathiocyanatocobaltate(II) with neotetrazolium chloride

The ion-pair formed between tetrathiocyanatocobaltate(II) and [3,3′-(4,4′- biphenylene)bis(2,5-diphenyl)]-2H-tetrazolium chloride (neotetrazolium chloride) can be extracted into 4-methylpentan-2-one and used for the spectrophotometric determination of cobalt (2.5–9.8 μg ml^?1) at pH 3.5–5.0. The Sandell sensitivity of the method is 0.02 μg Co cm^?2. With suitabte masking, the method is quite selective and is applicable to nickel wire alloys.     

Simple and Simultaneous Method for Determination of Palladium(II) and Ruthenium(III) using Second-Order-Derivative Spectrophotometry

Abstract

A simple, sensitive, and selective second-order-derivative spectrophotometric method has been developed for the simultaneous determination of palladium(II) and ruthenium(III) using 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) as a chromophoric reagent. The reagent (HMBATSC) reacts with Pd(II) and Ru(III) at pH 3.0, forming soluble yellowish green and dark brown species, respectively. Palladium and ruthenium present in the mixture were simultaneously determined without solving the simultaneous equations by measuring the second derivative amplitudes at 445 nm and 385 nm, respectively. Further, the Beer's law was obeyed in the range 0.21–12.78 µg mL^?1 and 0.25–13.42 µg mL^?1 for Pd(II) and Ru(III), respectively. A large number of foreign ions did not interfere in the present method. The proposed method was successfully applied for the determination of palladium in hydrogenation catalysts and ruthenium in water samples.     

Voltammetric Determination of Mercury(II) at Poly(3‐hexylthiophene) Film Electrode. Effect of Halide Ions

The well‐known method for the determination of mercury(II), which is based on the anodic stripping voltammetry of mercury(II), has been adapted for applications at the thin film poly(3‐hexylthiophene) polymer electrode. Halide ions have been found to increase the sensitivity of the mercury response and shift it more positive potentials. This behavior is explained by formation of mercuric halide which can be easily deposited and stripped from the polymer electrode surface. The procedure was optimized for mercury determination. For 120 s accumulation time, detection limit of 5 ng mL^?1 mercury(II) has been observed. The relative standard deviation is 1.3% at 40 ng mL^?1 mercury(II). The performance of the polymer film studied in this work was evaluated in the presence of surfactants and some potential interfering metal ions such as cadmium, lead, copper and nickel.     

Determination of trace Pb(Ⅱ), Cd(Ⅱ) and Zn(Ⅱ) using differential pulse stripping voltammetry without Hg modification

In this work,we reported a simultaneous determination approach for Pb(II),Cd(II)and Zn(II)atμg L 1concentration levels using differential pulse stripping voltammetry on a bismuth film electrode(BiFE).The BiFE could be prepared in situ when the sample solution contained a suitable amount of Bi(NO)3,and its analytical performance was evaluated for the simultaneous determination of Pb(II),Cd(II)and Zn(II)in solutions.The determination limits were found to be 0.19μg L 1for Zn(II),and0.28μg L 1for Pb(II)and Cd(II),with a preconcentration time of 300 s.The BiFE approach was successfully applied to determine Pb(II),Cd(II)and Zn(II)in tea leaf and infusion samples,and the results were in agreement with those obtained using an atomic absorption spectrometry approach.Without Hg usage,the in situ preparation for BiFE supplied a green and acceptability sensitive method for the determination of the heavy metal ions.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Synthesis and application of a novel magnetic nanosorbent for determination of trace Cd(II), Ni(II), Pb(II), and Zn(II) in environmental samples

In this work for the first time, Fe₃O₄@SiO₂ core–shell nanoparticles functionalized with isatin groups as a magnetic nanosorbent was applied for the simultaneous extraction of trace amounts of cadmium(II), nickel(II), lead(II), and zinc(II). The characterization of this nanosorbent was studied using Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectrometry, X-ray diffraction, vibrating sample magnetometer and thermogravimetric analysis. The effect of several factors such as pH, amount of sorbent, extraction time, type and volume of the eluent, sample volume, sorption capacity, and potentially interfering ions was investigated. In the selected conditions, it was observed that the limits of detection were 0.11 ng mL^?1 for Cd(II), 0.28 ng mL^?1 for Ni(II), 0.47 ng mL^?1 for Pb(II), and 0.21 ng mL^?1 for Zn(II), and the maximum sorption capacity of this suggested magnetic nanosorbent was 120, 112, 100, and 100 mg g^?1 for Cd(II), Ni(II), Pb(II), and Zn(II), respectively. Also, the precision of the method (RSD%) for ten replicate measurements was found 2.5, 2.5, 2.8, and 3.1%, for Cd(II), Ni(II), Pb(II), and Zn(II) ions, respectively. Finally, the suggested procedure was applied for determination of cadmium(II), nickel(II), lead(II), and zinc(II) at trace levels in different water and agricultural products with satisfactory results.     

Encapsulation of nickel(II) and copper(II) by a tetraazamacrocyclic ligand

A tetraazamacrocyclic ligand, L, containing six non-equivalent benzene rings, derived from the condensation of benzil with 1,2- diaminobenzene, has been isolated and its complexes [MLCl₂] (M = Ni²⁺ and Cu²⁺) prepared and characterized by elemental analysis, i.r., u.v.–vis., e.p.r. spectral studies, magnetic moments, redox potentials and conductivity measurements. The complexes have axially elongated octahedral geometries with two axial chlorines, and adopt the trans-configuration. These studies also indicate the covalent nature and the high-spin octahedral structure for these complexes. A cyclic voltammetric investigation reveals that the complexes exhibit a single one-electron redox couple, as anticipated for a copper(II) complex (Cu²⁺/Cu⁺) and a single two-electron redox couple for a nickel(II) complex (Ni²⁺/Ni⁰). The electrochemical processes are considered quasi-reversible. Antimicrobial activities of the ligand and the complexes have been tested against Bacillus megaterium and Candida tropicallis.     

Surface Modification of Gold by Quercetin Monolayer for the Electrochemical Determination of Copper(II)

A quercetin monolayer has been prepared on top of the self‐assembled 3‐mercaptopropionic acid (MPA) layer for the copper ion determination. Cu²⁺ ions are readily accumulated on this modified electrode through the complex formation and electrochemically detected. With a quercetin layer, the redox process of Cu²⁺ became more reversible than at the MPA‐modified electrode. Complexation sites in MPA and quercetin were occupied within five min when the electrode was immersed in 10 μM Cu²⁺ solution. The MPA and quercetin layers were stable enough to allow repeated EDTA treatment to remove adsorbed Cu²⁺ for the surface regeneration. Only 7% decrease was found after ten times regeneration and use. Linear current response was found over the concentration range of 1 nM and 10 μM with detection limit of 0.1 nM. Common interfering ions such as Cd²⁺, Zn²⁺, and Fe^2+/3+ did not show any electrochemical response in the potential range of Cu²⁺ determination.     

Simultaneous determination of zinc and copper(II) with 1-(2-pyridylazo)2-naphthol in micellar media by spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) was applied to handling spectrophotometric data for simultaneous determination of Zn²⁺ and Cu²⁺ or selective determination of Zn²⁺ in the presence of Cu²⁺. The ligand 1-(2-pyridylazo)2-naphthol (PAN) and its metal complexes (Zn-PAN and Cu(II)-PAN) were made water-soluble by the neutral surfactant Triton X-100, and therefore, no extraction with organic solvents was required. The method is based on the difference in absorbance of formed complexes between Zn²⁺ and PAN, at two different wavelengths at pH = 9.2. The formation of both the complexes was complete within five minutes. Zn²⁺ can be determined in the range of 0.2–25 μg/mL with satisfactory accuracy and precision in the presence of excess of Cu²⁺ and most other metal ions. Interference effects of common anions and cations were studied. Under working conditions, the proposed method was successfully applied to the simultaneous determination of Zn²⁺ and Cu²⁺ in several real and synthetic mixtures with different concentration ratio of Zn²⁺ and Cu²⁺. The text was submitted by the authors in English.     

Use of clinoptilolite loaded with 1-(2-pyridylazo)-2-naphthol as a sorbent for preconcentration of Pb(II), Ni(II), Cd(II) and Cu(II) prior to their determination by flame atomic absorption spectroscopy

A solid phase extraction system for separation and preconcentration of trace amounts of Pb(II), Ni(II), Cd(II) and Cu(II) is proposed. The procedure is based on the adsorption of Pb²⁺, Ni²⁺, Cd²⁺ and Cu²⁺ ions on a column of 1-(2-pyridylazo)-2-naphthol (PAN) immobilised on surfactant-coated clinoptilolite prior to their determinations by Flame Atomic Absorption Spectroscopy (FAAS). The effective parameters including pH, sample volume, sample flow rate and eluent flow rate were also studied. The analytes collected on the column were eluted with 5 mL of 1 mol L^?1 nitric acid. A concentration factor of 180 can be achieved by passing 900 mL of sample through the column. The detection limits (3 s) for Cd, Cu, Pb and Ni were found to be 0.28, 0.12, 0.44 and 0.46 µg L^?1, respectively. The relative SDs at 10 µg L^?1 (n = 10) for analytes were in the range of 1.2–1.4%. The method was applied to the determination of Pb, Ni, Cd and Cu in water samples.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Die durch Blei(II) und Kupfer(II) katalysierte Zersetzung von Wasserstoffperoxid als Endpunktindikation chelatometrischer Titrationen

Zusammenfassung Die Anwendung der durch Blei(II) und Kupfer(II) katalysierten Zersetzung von Wasserstoffperoxid als exotherme Indikatorreaktion bei katalytisch-thermometrischer Endpunktindikation chelatometrischer Bestimmungen wird gezeigt. Die katalytische Wirkung von Blei(II) wird in ammoniak-ammoniumtartrathaltiger Lösung (p_H 12) und die Wirkung von Kupfer(II) in ammoniumcarbonathaltigem (p_H 8,8), natriumhydroxid-natriumcarbonathaltigem (p_H 10) und in ammoniakalischem Medium herangezogen. Die direkte Titration von ÄDTA, DCTA und NTA mit Kupfer(II) und Blei(II), die inverse Titration dieser Metalle, wie auch die Bestimmung einiger Metallionen (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) durch Rücktitration wird beschrieben. Die genannten Ionen können im Milligramm- und Mikrogrammbereich mit befriedigender Genauigkeit bestimmt werden.

---

The end-point indication of chelatometric titrations by the decomposition of hydrogen peroxide catalyzed by lead(II) and copper(II)

Summary The application of the decomposition of hydrogen peroxide as exothermic indicator reaction catalyzed by lead(II) and copper(II), to catalytic thermometric endpoint detection of chelatometric titrations is described. The catalytic action of lead(II) is applied in ammonia-ammonium tartrate solution (p_H 12), the action of copper(II) in ammonium carbonate (p_H 8.8), sodium hydroxide-sodium carbonate (p_H 10) and in ammoniacal medium (p_H 12). The direct titration of EDTA, DCTA and NTA with copper(II) and lead(II), the invers titration of this metals, as well as the determination of several ions (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) by backtitration has been developed. The ions mentioned can be determined in the milligram and in the microgram range with reasonable accuracy.