A Convenient Oxidation of 5‐Substituted Pyrazol‐3(2H)‐Ones Into Methyl 2‐Alkynoates Using Poly[4‐(Diacetoxyiodo)Styrene]

An operationally simple oxidation of 5‐substituted pyrazol‐3(2H)‐ones to the corresponding methyl‐2‐alkynoates in good yields with a mediated poly[4‐(diacetoxyiodo)styrene] system in methanol and acetonitrile at room temperature was carried out. The polymeric reagent can be regenerated and reused as an environmentally benign reagent.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

聚(丙烯酸钠-4-乙烯基吡啶)的生物降解性和功能性研究

用自由基共聚法制备了一系列可生物降解的功能聚合物聚(丙烯酸钠-4-乙烯基吡啶)[P(SA-co-4VP)],研究了其组成和分子量与生物降解性、资合性及分散性间的关系.结果表明:聚合物中小乙烯基吡啶含量越大,P(SA-co-4VP)的生物降解越显著.分子是一定时,少量的个乙烯基吡啶引入聚丙烯酸钠主链是增强聚合物生物降解性和保持原有功能特性的有效途径.     

胆固醇修饰的低分子量聚乙烯亚胺接枝化聚[L-天冬酰胺-co-L-赖氨酸]作为基因载体的性能研究

通过将低分子量的聚乙烯亚胺(PEI600)及其胆固醇衍生物与聚(L-天冬酰胺-co-L-赖氨酸)(PSL)进行开环反应, 合成了一类新型的肿瘤靶向基因载体, 研究了这类载体与DNA形成复合物的性质以及介导绿色荧光蛋白质粒pEGFP-C1转染不同细胞的性能. 结果表明, 在复合质量比大于5∶1时, 各载体均能与DNA形成结构稳定的复合物. 同时转染实验结果证明, 通过在侧链引入一定数目的胆固醇, 可以明显提高载体对于癌细胞HepG2和Hela的转染效率. 这类新型的载体具有良好的细胞相容性、较高的转染效率以及易于进行靶向修饰等特点, 在基因治疗研究领域中将具有较好的潜在应用价值.     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.     

阴离子聚合法合成PMMA-b-PMTFPS嵌段共聚物

以含缩醛官能团的有机锂为引发剂, 将甲基丙烯酸甲酯(MMA)与含氟硅氧烷单体1,3,5-三甲基-1,3,5-三(3',3',3'-三氟丙基)环三硅氧烷(F3)阴离子嵌段共聚, 获得了窄分子量分布的聚甲基丙烯酸甲酯-b-聚[甲基(3,3,3-三氟丙基)硅氧烷](PMMA-b-PMTFPS)嵌段共聚物, 并用GPC, 1H NMR, FTIR和DSC对嵌段共聚物进行了表征. 研究结果表明, 在THF中利用PMMA-OLi对F3进行阴离子开环聚合时, 单体F3浓度的选择对提高嵌段共聚物产率至关重要.     

Synthesis and properties of new organo‐soluble and strictly alternating aromatic poly(ester‐imide)s from 3,3‐bis[4‐(trimellitimidophenoxy)phenyl]phthalide and bisphenols

A series of new strictly alternating aromatic poly(ester‐imide)s having inherent viscosities of 0.20–0.98 dL/g was synthesized by the diphenylchlorophosphate (DPCP) activated direct polycondensation of the preformed imide ring‐containing diacid, 3,3‐bis[4‐(trimellitimidophenoxy)phenyl]phthalide (I), with various bisphenols in a medium consisting of pyridine and lithium chloride. The diimide–diacid I was prepared from the condensation of 3,3‐bis[4‐(4‐aminophenoxy)phenyl]phthalide and trimellitic anhydride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N‐methyl‐2‐pyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc). Transparent and flexible films of these polymers could be cast from their DMAc solutions. The cast films had tensile strengths ranging 66–105 MPa, elongations at break from 7–10%, and initial moduli from 1.9–2.4 GPa. The glass‐transition temperatures of these polymers were recorded between 208–275 °C. All polymers showed no significant weight loss below 400 °C in the air or in nitrogen, and the decomposition temperatures at 10% weight loss all occurred above 460 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1090–1099, 2000     

Iodide‐Selective Electrodes Based on Bis[N(2‐methyl‐phenyl) 4‐Nitro‐thiobenzamidato]mercury(II) and Bis[N‐phenyl 3,5‐Dinitro‐thiobenzamidato]mercury(II) Carriers

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on recently synthesized mercury complexes including Hg(Nmpntb)₂ and Hg(Npdntb)₂ as new carriers for iodide‐selective electrodes by incorporating the membrane ingredients on the surface of graphite electrodes are reported. The effect of various parameters including the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses toward iodide over a wide concentration range of 7×10^?7 to 0.1 M and 1×10^?6 to 0.1 M, with slopes of 59.6±0.8 and 58.9±0.9 mV per decade of iodide concentration and detection limit of 3×10^?7 M and 7×10^?7 for Hg(Npdntb)₂ and Hg(Nmpntb)₂, respectively, over a wide pH range of 3–11. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show good ability to discriminate iodide over several inorganic and organic anions. The electrodes were successfully applied to direct determination of iodide in synthetic mixture, waste water and drinking water and as indicator electrodes in precipitation titrations.     

Hypervalent Iodine(III) Sulfonate Mediated Synthesis of 6‐Arylimidazo[2,1‐b]thiazoles in Liquid PEG‐400

PEG‐400[poly(ethylene glycol‐400)] is used as reaction medium in the one‐pot synthesis of 6‐arylimidazo[2,1‐b]thiazoles by reaction with aryl ketones, hypervalent iodine(III) sulfonate and 2‐aminothiazole. Significant rate enhancements and improved yields have been observed.     

Synthesis and characterization of organosoluble copolyimides based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]propane, 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane and a pair of commercial aromatic dianhydrides

Organosoluble homopolyimides (PIs) and copolyimides (CoPIs) were synthesized from 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) or 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP) and six kinds of commercial aromatic dianhydrides (PMDA, II _a ; BTDA, II _b ; BPDA, II _c ; ODPA, II _d ; DSDA, II _e ; 6FDA, II _f ). Although BAPP and II _d∼f could prepare three kinds of soluble PIs ( III‐A _d∼f ), likewise 6FBAPP and II _c∼f could prepare four PIs ( III‐B _c∼f ), the insoluble PIs were synthesized from these two diamines and other dianhydrides. However, soluble CoPIs could be prepared by alternative copolycondensation from a pair of dianhydrides of soluble PIs and insoluble PIs in certain molar ratios (m₁/m₂). The ratios of m₁/m₂ of BAPP/PMDA series CoPIs ( IV _{m1(d–f)/m2a} ) ranged from 3–5, but ratios of 6FBAPP/PMDA series CoPIs ( V _{m1(c∼f)/m2a} ) decreased to 2–3. The m₁/m₂ of the BAPP/BTDA and 6FBAPP/BTDA series CoPIs were 2, while the BAPP/BPDA series were between 1–2. Composition, solubility, tensile properties and thermal properties of these CoPIs synthesized via a two‐stage thermal cyclodehydration were determined and were compared with their corresponding PIs. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3954–3961, 2000     

Hypervalent Iodine(III) Sulfonate Mediated Synthesis of 2‐Arylimidazo[1,2‐a]Pyrimidines in Liquid PEG‐400

PEG‐400[poly(ethylene glycol‐400)] is used as a “green” recyclable solvent in the one‐pot synthesis of 2‐arylimidazo[1,2‐a]pyrimidines by reaction with ketones, [hydroxyl(2,4‐dinitrobenzenesulfonyloxy)‐iodo]benzene (HDNIB), and 2‐aminopyrimidine. Significant rate enhancements and improved yields have been observed.     

Electrosynthesis of Chirality Conducting Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] with Good Blue Light‐Emitting Properties

Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] (PN9FPA) films with good fluorescence properties and chirality were prepared electrochemically by direct anodic oxidation of N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine (N9FPA) in boron trifluoride diethyletherate (BFEE). Fourier transform infrared spectroscopy measurement showed that the polymerization of N9FPA occurred mainly at the C(2) and C(7) positions. The fluorescence spectra indicated that PN9FPA films were blue‐light emitters. In addition, the structures and properties of the monomer and the polymers were characterized and evaluated with CV, UV, TGA and SEM.     

Synthesis and characterization of a thermotropic liquid‐crystalline poly[2,5‐bis(4′‐alkoxycarbonylphenyl) styrene]

We report the synthesis and characterization of a series of novel mesogen‐jacketed liquid‐crystalline polymers, poly[2,5‐bis(4′‐alkoxycarbonylphenyl)styrene]s ( 1‐m , where m is the number of carbon atoms in the alkyl tails), along with the corresponding monomers, 2,5‐bis(4′‐alkoxycarbonylphenyl)styrenes ( 2‐m ), and their precursors, 2,5‐bis(4′‐alkoxycarbonylphenyl)toluenes ( 3‐m ). The influence of the tail length on the thermotropic properties of the two types of low‐molecular‐mass compounds and macromolecules was investigated with a combination of differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction techniques. Except for compound 3‐3 , which exhibited a monotropic nematic phase, all members of the low‐molar‐mass molecules developed no mesophase during both heating and cooling processes. The glass‐transition temperatures of the polymers decreased as the tail lengths increased. The 5% weight loss temperatures of all the polymers under a nitrogen atmosphere were above 360 °C, indicating quite high thermal stability. Although polymers 1‐1 and 1‐2 were non‐liquid‐crystalline, columnar nematic phases were observed for the remaining homopolymers with longer alkyl tails. The mesophases of 1‐3 to 1‐9 that developed at high temperatures remained upon cooling to room temperature, whereas those of 1‐10 to 1‐12 disappeared during the cooling process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 830–847, 2007.     

Synthesis of Furo[2,3‐d]pyridazin‐4(5H)‐one and Its N(5)‐Substituted Derivatives

We report the efficient preparation of furo[2,3‐d]pyridazin‐4(5H)‐one and its N‐substituted derivatives starting from methyl 2‐methylfuran‐3‐carboxylate. The Me group was converted to the aldehyde group, which was then condensed with hydrazine derivatives. Then, the ester functionalities were hydrolyzed to the corresponding acids, followed by treatment with SOCl₂ to give N‐substituted furopyridazinone derivatives.     

Supramolecular Architectures of Four New Transition Metal Complexes with 3‐[4‐(Carboxymethoxy)phenyl]propanoic Acid and N‐[4‐(Carboxymethoxy)phenyl]iminodiacetic Acid

Four new transition metal complexes: [Cu(Hcppa)₂(H₂O)₂] ( 1 ), [Co₂(cppa)₂(H₂O)₁₀] ( 2 ), [Co₃(cpia)₂(H₂O)₈] · 2H₂O ( 3 ) and [Ni₃(cpia)₂(H₂O)₁₂] · 6H₂O ( 4 ) {H₂cppa = 3‐(4‐(carboxymethoxy)phenyl]propanoic acid; H₃cpia = N‐[4‐(carboxymethoxy)phenyl]iminodiacetic acid} were synthesized and characterized. Complexes 1 and 2 show mononuclear structures, complexes 3 and 4 exhibit dinuclear structures. All complexes extend to 3D supramolecular networks through hydrogen bonds, of which complexes 3 and 4 display microporous structures. In complexes 2 – 4 the water clusters are trapped by the cooperative association of coordinate interactions as well as hydrogen bonds, forming different 1D metal‐water chain structures. Thermal stabilities of complexes 1 – 4 were discussed.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Poly[1‐(trimethylgermyl)‐1‐propyne] and poly[1‐(trimethylsilyl)‐1‐propyne] with various geometries: Their synthesis and properties

The polymerization of 1,2‐disubstituted acetylenes [1‐(trimethylgermyl)‐1‐propyne and 1‐(trimethylsilyl)‐1‐propyne] initiated by Nb‐ and Ta‐based catalytic systems was studied within a wide temperature range (?10 to +80 °C) with solvents (cyclohexane, CCl₄, toluene, anisol, and n‐chlorobutane) with variable dielectric constants (2.023–7.390). Conditions ensuring the synthesis of poly[1‐(trimethylsilyl)‐1‐propyne] (PTMSP) containing 20–80% cis units and poly[1‐(trimethylgermyl)‐1‐propyne] (PTMGP) containing 3–65% cis units were determined. The PTMSP and PTMGP samples were amorphous, exhibited a two‐phase structure characterized by the presence of less ordered regions and regions with an enhanced level of ordering, and differed in solubility. A correlation was found between the cis/trans ratio and the morphology, the geometrical density of PTMSP and PTMGP films, and the gas permeability of the polymers. The gas permeability and solubility behavior of PTMSP and PTMGP were examined in terms of the molecular characteristics of the polymer samples (the thermodynamic Kuhn segment and the Kerr electrooptic effect). It was demonstrated that the gas permeability, as well as the solubility of the polymers, was defined by their supramolecular ordering, which depended on the lengths of continuous sequences composed of units of analogous microstructures and on the flexibility of macrochains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2133–2155, 2003     

A Simple Synthesis of 2‐{(Arylmethylidene)hydrazinylidene]‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4(3H)‐ones

A simple synthesis of 2‐hydrazinylidene‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4‐ones is described. A mixture of (isocyanoimino)(triphenyl)phosphorane, an aromatic aldehyde, and dehydroacetic acid (=3‐acetyl‐2‐hydroxy‐6‐methyl‐4H‐pyran‐4‐one) undergo a 1 : 1 : 1 addition reaction under mild conditions to afford the title compounds in excellent yields.     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

Efficient Iminophosphorane‐Mediated Preparation of Benzofuro[3,2‐d]pyrimidin‐4(3H)‐ones and Unexpected Ring Opening Products

The carbodiimides 4 , obtained from aza‐Wittig reactions of iminophosphorane 3 with aromatic isocyanates, reacted with secondary amines, phenols or alcohols in the presence of catalytic amounts of K₂CO₃ or sodium alkoxide to give 2‐substituted benzofuro[3,2‐d]pyrimidin‐4(3H)‐ones 6 . However, when 2,2′‐iminobis[ethanol] was used, the unexpected ring opening product 7 was formed instead of 6 . Reaction of 4 with primary amines RNH₂ (R=Et, Pr, Bu, etc.) gave guanidine intermediates 8 , which were further treated with EtONa to give only one regioisomer 9 via a base catalyzed cyclization. However, another regioisomer 11 was obtained when NH₃ or ‘small’ amines RNH₂ (R=Me, NH₂) were used in the absence of EtONa via a spontaneous cyclization of 8 .