Vapour–liquid equilibrium data for the 1,1,1,2 tetrafluoroethane (R134a) + dimethyl ether (DME) system at temperatures from 293.18 to 358.15 K and pressures up to about 3 MPa

Isothermal vapour–liquid equilibrium data have been measured for the binary system R134a + DME at five temperatures between 293.18 and 358.15 K, and pressures between 0.4899 and 2.9442 MPa. The peculiarity of this system is the existence of an azeotrope with a minimum pressure, which disappears at 358.15 K. The experimental method used in this work is of the static-analytic type, taking advantage of two pneumatic capillary samplers (Rolsi™, Armines’ patent) developed in the CENERG/TEP Laboratory. The data were obtained with uncertainties within ±0.02 K, ±0.0001 MPa and ±1% for molar compositions.

The isothermal P, x, y data are well represented with the Redlich and Kwong equation of state using the Mathias–Copeman alpha function and the Huron–Vidal mixing rules involving the NRTL model.     

Charge Transfer Complexes of Some Heterocyclic Aromatic Amines with π‐Organic Acceptors in Polar Solvents

A conductometric titration technique has been used to investigate the electron transfer activity of CT molecular complexes formed by arylazopyrimidine and naphthylazopyrimidine derivatives as donors and the organic π‐acceptors p‐nitroaniline, p‐chloroaniline, p‐bromoaniline, anthraquinone, picric acid, α‐nitroso‐β‐naphthol, p‐hydroxybenzaldehyde and maleic anhydride. The study was performed at different degree of temperature and in three different polar solvents namely N,N‐dimethylformamide (DMF), acetonitrile (ACN) and dimethylsulfoxide (DMSO). The stoichiometric ratios of these complexes were found to be 1:1. The dissociation constant (ασ_M) values of the formed complexes have been calculated, and the effects of solvents as well as types of electron donors on their conductance σ_p‐values have been examined.     

Spectroscopic and Electrochemical Characterization of Cytochrome P450st‐DDAB Films on a Plastic‐Formed Carbon Electrode

We have studied the characterization of thermophilic cytochrome P450 (P450st)‐didodecyldimethylammonium bromide (DDAB) films by using UV‐vis absorption, resonance Raman spectroscopy, and electrochemical methods. The observed Raman spectrum indicated near‐native conformation of the heme iron in DDAB film on the surface of a glass slide, while on the surface of a plastic‐formed carbon (PFC) electrode, the conformation of P450st‐DDAB was very similar to that of heme‐DDAB film, suggesting the release of heme from P450st in DDAB films on PFC electrodes. When NaBr was added as salt to the casting solution, the result of Raman spectrum indicated near‐native conformation of P450st in DDAB film even on the PFC electrode, but no redox potential of P450st which has near native structure was observed. This study suggests the essential experimental conditions when working with heme protein‐DDAB films as, in some cases, heme iron from proteins is released on the surface of the electrode.     

Mechanistic Insight into Formation of Oxo‐Iron(IV) Porphyrin π‐Cation Radicals from Enzyme Mimics of Cytochrome P450 in Organic Solvents

Two new models for cytochrome P450 in which the thiolate axial ligand is replaced by an RSO₃^? group, form oxo‐iron(IV) porphyrin π‐cation radicals as sole oxidation products in “peroxo shunt” reactions (see scheme) independent of the nature of the employed solvent (polar or non‐polar) and electronic nature of the porphyrin rings.

     

Kinetics of the Reaction of 2‐Chloro‐3,5‐dinitrobenzotriflouride with Aniline in Toluene and Methanol‐Toluene Mixed Solvents

Kinetics of the reaction of 2‐chloro‐3,5‐dinitrobenzotriflouride with aniline were studied in toluene, methanol‐toluene binary solvents, benzene and chloroform. The reaction in toluene exhibits third‐order kinetics consistent with aggregates of aniline. Thermodynamic parameters (H^#, (S^# and (G^#are calculated and discussed for the reaction of 2‐chloro‐3,5‐dinitrobenzotriflouride with aniline in methanol‐toluene. Molecular complexes between aniline and the substrate are rejected spectrophotometricaly. The mechanism is studied and compared with the reaction in presence of pyridine. It shows an amine dependence and formation of homo and/or hetero mixed aggregates between aniline and pyridine i.e. dimer mechanism.     

Self‐Assembly of Poly(γ‐benzyl L‐glutamate)‐graft‐Poly(ethylene glycol) and Its Mixtures with Poly(γ‐benzyl L‐glutamate) Homopolymer

Summary: Self‐association behaviors of poly(γ‐benzyl L ‐glutamate)‐graft‐poly(ethylene glycol) (PBLG‐graft‐PEG) and its mixtures with PBLG homopolymer in aqueous media were investigated by fluorescence spectroscopy, transmission electron microscopy (TEM), and nuclear magnetic resonance (NMR) spectroscopy. It was revealed that PBLG‐graft‐PEG could self‐assemble to form polymeric micelles with a core‐shell structure in the shape of spindle. The introduction of PBLG homopolymer not only decreases the critical micelle concentration, but also changes the morphology of the micelles.

The excitation fluorescence spectra of pyrene as a function of concentrations for the mixture of PBLG‐graft‐PEG with PBLG and a TEM image of the formed micelles.     

Synthesis of 4‐Aryl‐8‐fluoro‐3a,4,5,9b‐tetrahydro‐3H‐cyclopenta[c]quinolines and Their Ozonides

4‐Aryl‐8‐fluoro‐3a,4,5,9b‐tetrahydro‐3H‐cyclopenta[c]quinolines are synthesized by acid‐catalyzed (CF₃CO₂H) three‐component cyclocondensation of 4‐fluoroaniline with aromatic aldehydes and cyclopentadiene. Stable ozonides with (1R*,4S*,5aR*,6S*,11bS*)‐configurations are obtained by ozonolysis of corresponding trifluoroacetyl derivatives.     

Determination of 3,5,6‐trichloro‐2‐pyridinol,phoxim and chlorpyrifos‐methyl in water samples using a new pretreatment method coupled with high‐performance liquid chromatography

A novel low‐density solvent‐based vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction with the solidification of floating organic droplet method coupled with high‐performance liquid chromatography was developed for the determination of 3,5,6‐trichloro‐2‐pyridinol, phoxim and chlorpyrifos‐methyl in water samples. In this method, the addition of a surfactant could enhance the speed of the mass transfer from the sample solution into the extraction solvent. The extraction solvent could be dispersed into the aqueous by the vortex process. The main parameters affecting the extraction efficiency were investigated and the optimum conditions were established as follows: 80 μL 1‐undecanol as extraction solvent, 0.2 mmol/L of Triton X‐114 selected as the surfactant, the vortex time was fixed at 60 s with the vortex agitator set at 3000 rpm, the concentration of acetic acid in sample solution was 0.4% v/v and 1.0 g addition of NaCl. Under the optimum conditions, the enrichment factors were from 172 to 186 for the three analytes. The linear ranges were from 0.5 to 500 μg/L with a coefficient of determination (r²) of between 0.9991 and 0.9995. Limits of detections were varied between 0.05 and 0.12 μg/L. The relative standard deviations (n = 6) ranged from 0.26 to 2.62%.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

Reaction of 1,2‐Dialkyldiaziridines and 1,2,3‐Trialkyldiaziridines with Methyl Propiolate in Ionic Liquids and in Organic Solvents

An interaction of 1,2‐dialkyldiaziridine and 1,2,3‐trialkyldiaziridine with methyl propiolate was studied both in organic solvent (MeCN, CH₂Cl₂, C₆H₆) and in ionic liquids. Earlier unknown linear structures, in which three molecules of methyl propiolate were suited to one diaziridine molecule (adducts 1 : 3), were obtained in MeCN. The diaziridine ring expansion products 1,2,3,4‐tetrahydropyrimidine derivatives (adducts 1 : 2) and, along with them in some cases, the same linear structures were obtained in ionic liquids. A mechanism of reactions found was offered. The regioselectivity of reactions was supposed to determine by the structure of substituents in initial diaziridines. This conclusion was supported by quantum chemical calculations.     

Microwave‐Assisted Synthesis of Novel 2,4‐Dihydro‐5‐[4‐(trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones and Potentiometric Determination of Their pKa in Nonaqueous Solvents

The novel 4‐amino‐ or 4‐aryl‐substituted 2,4‐dihydro‐5‐[(4‐trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones 3a – 3g were synthesized by reaction of N‐(ethoxycarbonyl)‐4‐(trifluoromethyl)benzenehydrazonic acid ethyl ester ( 2 ) and primary amines or hydrazine by microwave irradiation. Compounds 3a – 3g were potentiometrically titrated with tetrabutylammonium hydroxide (Bu₄NOH) in four nonaqueous solvents, i.e., ⁱPrOH, ^tBuOH, MeCN, and N,N‐dimethylformamide (DMF). Also half‐neutralization potential values and the corresponding pK_a values were determined in all cases.     

Cyclization Reactions of 5‐Aminopyrazoles with β‐Ketoesters,Enamines and β‐Keto Anilides: New Synthetic Routes to Pyrazolo[1,5‐a]Pyrimidine Derivatives

The pyrazolo[1,5‐a]pyrimidines 4, 10, 11 and 14 were synthesized from reaction of 4‐aryazo‐2,5‐diaminopyrazoles 1 with cyclic β‐ketoesters 2a,b or cyclic β‐ketoesters 7, 8 or acetoacetanilide 12 , respectively. The reaction of 1 with the enamines 15, 16 and 17 yielded also the pyrazolo[1,5‐a]pyrimidines 18, 20 and 21 , respectively.     

Preconcentration/Separation of Some Metal Ions Using Sodium Dodecyl Sulfate Coated Alumina Modified with Bis(5‐bromo‐2‐hydroxy‐benzaldehyde)‐2‐methyl‐1,5‐pentane Diimine (BBHBPDI) Prior to Their Flame‐AAS Determination

Preconcentration/separation of Co(II), Fe(III), Pb(II), Cr(III), Cu(II) and Cd(II) ions using bis(5‐bromo‐2‐hydroxy‐benzaldehyde)‐2‐methyl‐1,5‐pentane diimine (BBHBPDI) on SDS coated alumina has been reported. The influences of the analytical parameters including pH, ligand and SDS amount, type and concentration of eluent and sample volume on metal ions recoveries were investigated. At optimum values of all variables the relative standard deviation are between 2.5–2.7 and preconcentration factor was 375, while recoveries for all understudy metal ions are higher than 95%, determination limits are between 1.5–2.7. The method has been successfully applied to determination of Co(II), Fe(III), Pb(II), Cr(III), Cu(II) and Cd(II) ions content in some real samples.     

HPLC method development and validation of cytotoxic agent phenyl‐heptatriyne in Bidens pilosa with ultrasonic‐assisted cloud point extraction and preconcentration

Extraction and pre‐concentration of a bioactive marker compound, phenyl‐1,3,5‐heptatriyne from Bidens pilosa, prior to HPLC has been demonstrated using both organic and ecofriendly solvents. Non‐ionic surfactants, viz. Triton X‐100, Triton X‐114 and Genapol X‐80, were used for extraction. No back‐extraction or liquid chromatographic steps were required to remove the target phytochemical from the surfactant‐rich extractant phase. The optimized cloud point extraction procedure has been shown to be a potentially useful methodology for the preconcentration of the target analyte, with a preconcentration factor of 4–99. Moreover, the method is simple, sensitive, rapid and consumes lesser solvent than traditional methods. An isocratic chromatographic separation and quantitation was accomplished on a C₁₈ column with acetonitrile–acidified aqueous as mobile phase at a flow rate of 1.0 mL/min, UV detection at 254 nm and specificity with photo diode‐array detector (PDA) and MS. Under the optimum experimental conditions recovery was satisfactory (99.18–100.33%) without interference from the surfactant. The method seems to be reliable with intraday precision and interday precision below 2.0%. Good linearity was obtained in the working range from 7.5 to 30 µg/mL with correlation coefficient >0.99. The limits of detection and quantitation were 1.84 and 6.13 µg/mL, respectively. The method was validated following international guidelines and successfully applied for quantitative assays of cytotoxic compound phenyl‐1,3,5‐heptatriyne in Bidens pilosa. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Gelation of a Highly Fluorescent Urea‐Containing Triarylmelamine Derivative: 2,4,6‐Tris(p‐N′‐Octadecylureido‐Anilino)Triazine in Organic Solvents

A new gelator of urea‐containing triazine derivatives was synthesized and tested in order to explore the gelation potential in different organic solvents. This compound has been found to form organogels with a variety of organic solvents such as decalin and other solvents. The resulting thermo‐reversible gel was characterized by using the dropping ball method and a number of other instruments. The melting temperature of the gel increased with the gel concentration. The intermolecular hydrogen bonding of gelation was demonstrated through an FT‐IR spectrometer. UV‐Vis and fluorescence analysis showed that the gel displayed various optical effects in different organic solvents. The blue fluorescence of the gel in decalin and the quenched effect of gel in CHCl³ were displayed, respectively. Morphological features in decalin and CHCl₃ were studied by applying atomic force microscopy (AFM), and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes indicated high conductivity (σ) comparable to the corresponding NaClO₄/THF solution. The conductivity of gel electrolytes was increased with electrolyte salt.     

3-次苄基6-氟-硫色满酮与3-氨基-1,2,4-三氮唑的环缩合反应研究

本文考察了溶剂、温度、反应时间和7-芳基等对3-次苄基6-氟-硫色满酮与3-氨基-1,2,4-三氮唑的环缩合反应的影响。实验结果表明在环缩合反应中同时生成了并四环的二氢嘧啶和嘧啶。而且高温时,并四环二氢嘧啶可以在没有脱氢剂的条件下直接脱氢生成嘧啶。文中合成的化合物结构经氢核磁共振谱、质谱、元素分析和X-射线单晶衍射确证。并对同时生成并四环二氢嘧啶和嘧啶的环缩合反应的机理进行了探讨。     

One‐ and Two‐Dimensional PbII Complexes Constructed from N‐Donor Chelating Ligands with Extended π‐System and Organic Dicarboxylates

Two new coordination polymers [Pb(TIP)(1,3‐bdc)]_n ( 1 ) and [Pb(Dpq)(fum)]_n ( 2 ) (TIP = 2‐(2‐thienyl)imidazo[4,5‐f]1,10‐phenanthroline, Dpq = dipyrido[3,2‐d:2′,3′‐f]quinoxaline, 1,3‐H₂bdc = benzene‐1,3‐dicarboxylic acid, fum = fumaric acid) were synthesized by hydrothermal reactions and were characterized by elemental analyses, IR spectroscopy and single‐crystal X‐ray diffraction. Complex 1 is a one‐dimensional (1D) chain, which is bridged by 1,3‐bdc ligands. This is further extended into a three‐dimensional (3D) supramolecular structure by hydrogen bonding interactions. Compound 2 exhibits a two‐dimensional (2D) network structure, which is further stacked by π–π interactions to form a 3D supramolecular framework. The most important feature of these two complexes is that the N‐donor ligands with an extended π‐system play a crucial role in the formation and stabilization of the final supramolecular frameworks. Moreover, the fluorescence property of complex 1 was also investigated in the solid state at room temperature.     

Effervescence‐assisted dispersive solid‐phase extraction using ionic‐liquid‐modified magnetic β‐cyclodextrin/attapulgite coupled with high‐performance liquid chromatography for fungicide detection in honey and juice

In this study, a simple effervescence‐assisted dispersive solid‐phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic‐liquid‐modified magnetic β‐cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one‐factor‐at‐a‐time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3–5.44%. The detection and quantitation limits were in the ranges of 0.07–0.38 and 0.23–1.27 μg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost‐effective, environmentally friendly, and time‐saving.     

Cationic Surfactants as Regulators in Paper Separation of 2‐Nitrophenol and 2,4,6‐Trinitrophenol in Water

The chemical pollutants 2‐nitrophenol (2‐NP) and 2,4,6‐trinitrophenol (2,4,6‐TNP) were studied for their separation from water by the paper capillary permeation adsorption technique by the use of the four cationic surfactants dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC) as regulators. The effect of pH and the concentration of surfactant on the separatability have been investigated. A nearly 100% separatability was obtained for each pollutant at its optimum pH and surfactant concentration. It was shown that the separation was accomplished via surface adsorption onto the fibers of paper. The change in separatability at basic pH 11 with surfactant variety was analyzed. The result shows that the surfactant with a longer chain alkyl group is more effective for the separation of 2‐NP and the surfactants with 16 carbons in the long chain alkyl group are most effective. The surfactants with 12 carbons or more in the long alkyl group but containing no aromatic group such as pyridyl group are equally effective for accomplishing an efficient separation of 2,4,6‐TNP. Selective separation of 2‐NP from an admixture of 2‐NP plus 2,4,6‐TNP was attempted. The optimum surfactant for each pollutant was tested with seawater for removing the pollutant. The goal of this study is to search for an optimum cationic surfactant and optimum separation conditions for nitrophenols.