Report on an Unusual Cascade Reaction between Azulenes and 2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐Dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ)

The oxidation of 1‐(3,8‐dimethylazulen‐1‐yl)alkan‐1‐ones 1 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ) in acetone/H₂O mixtures at room temperature does not only lead to the corresponding azulene‐1‐carboxaldehydes 2 but also, in small amounts, to three further products (Tables 1 and 2). The structures of the additional products 3 – 5 were solved spectroscopically, and that of 3a also by an X‐ray crystal‐structure analysis (Fig. 1). It is demonstrated that the bis(azulenylmethyl)‐substituted DDQ derivatives 5 yield on methanolysis or hydrolysis precursors, which in a cascade of reactions rearrange under loss of HCl into the pentacyclic compounds 3 (Schemes 4 and 7). The found 1,1′‐[carbonylbis(8‐methylazulene‐3,1‐diyl)]bis[ethanones] 4 are the result of further oxidation of the azulene‐1‐carboxaldehydes 2 to the corresponding azulene‐1‐carboxylic acids (Schemes 9 and 10).     

One‐Pot Synthesis of 1,4‐Oxathiino[2,3‐b]quinoxalines or ‐pyrazines from 2,3‐Dichloroquinoxaline or ‐pyrazine and 1‐Aryl‐2‐bromoalkan‐1‐ones

An efficient one‐pot synthesis of novel heterocyclic derivatives, 2‐aryl‐1,4‐oxathiino[2,3‐b]quinoxalines or ‐pyrazines 5 , via the reaction of 2,3‐dichloroquinoxaline or ‐pyrazine with Na₂S?9 H₂O, and subsequent treatment of the resulting 2‐chloro‐3‐sodiosulfanylquinoxaline or ‐pyrazine 2 with 1‐aryl‐2‐bromo‐1‐alkanones and then NaH under mild conditions is described.     

Quantitation and pharmacokinetics of 1,4‐diamino‐2,3‐dicyano‐1,4‐bis (2‐aminophenylthio) butadiene (U0126) in rat plasma by liquid chromatography‐tandem mass spectrometry

A simple, robust, and rapid LC‐MS/MS method was developed for the quantitation of U0126 and validated in rat plasma. Plasma samples (20 μL) were deproteinized using 200 μL ACN containing 30 ng/mL of chlorpropamide, internal standard. Chromatographic separation performed on an Agilent Poroshell 120 EC‐C₁₈ column (4.6 × 50 mm, 2.7 μm particle size) with an isocratic mobile phase consisting of a 70:30 v/v mixture of ACN and 0.1% aqueous formic acid. Each sample was run at 0.6 mL/min for a total run time of 2 min per sample. Detection and quantification were performed using a mass spectrometer in selected reaction‐monitoring mode with positive ESI at m/z 381 → 123.9 for U0126 and m/z 277 → 175 for the internal standard. The standard curve was linear over a concentration range of 20–5000 ng/mL with correlation coefficients greater than 0.9965. Precision, both intra‐ and interday, was less than 10.1% with an accuracy of 90.7–99.4%. No matrix effects were observed. U0126 in rat plasma degraded approximately 41.3% after 3‐h storage at room temperature. To prevent degradation, sample handling should be on an ice bath and all solutions kept at 4°C. This method was successfully applied to a pharmacokinetic study of U0126 at various doses in rats.     

Structures and Magnetic Properties of Two Copper(II) Complexes with 2,5‐Dichloro‐3,6‐Dihydroxy‐1,4‐Benzoquinone Dianionic and Tetrachloroquinone Ligand

The polynuclear copper(II) complex [Cu₂(Hdpa)₂(μ‐ClDHBQ)(ClO₄)₂]_n, 1 is bridged by ClDHBQ^?2 (2,5‐dichloro‐3,6‐dihydroxy‐1,4‐benzoquinone dianionic) and 2,2′‐dipyridylamine (Hdpa). In the axial position, Cu is connected with the oxygen atom of ClO. The perchlorate anion may be envisaged as a monodentate O‐bound ligand. Through the bond bridge of O–Cu … O–Cl, the binuclear compound [Cu₂(Hdpa)₂(μ‐ClDHBQ)(ClO₄)₂] is strung together into a long chain compound. Tetrachlorocatechol underwent partial oxidation/hydrolysis/dechlorination processes to produce ClDHBQ^?2. The other mononuclear complex [Cu(Hdpa)(TeCQ)](DMF), 2 , in which tetrachloroquinone (TeCQ) was produced by oxidation of tetrachlorocatechol (TeCC), therefore complex 2 is in the quinone form. The magnetic susceptibility measurements show antiferromagnetic coupling with J = ?11.9 cm^?1, θ = 2.6 K, and g = 2.05 for complex 1. Complex 2 exhibits the typical paramagnetic behavior of s = 1/2.     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Theoretical investigations of 1,4‐butanediol and 2‐butene‐1,4‐diol cyclodehydration using postprocessing visualization of quantum chemical calculation data

Cyclodehydration of 1,4‐butanediol and 2‐butene‐1,4‐diol to the corresponding cyclic ethers was studied using the AM1 semiempirical method. It was established that the cyclodehydration reaction of 1,4‐butenediol and 2‐butene‐1,4‐diol is effected by converting of semicyclic conformers in the presence of acidic and basic active centers. The calculation results indicate that a concerted mechanism is probably realized in the cyclodehydration of both diols, while the sequences of the predicted steps in the cyclodehydration reaction for 1,4‐butanediol and 2‐butene‐1,4‐diol are different. The calculated reaction heats for 1,4‐butanediol and 2‐butene‐1,4‐diol transformations are ?184.029 and ?308.746 kcal/mol, respectively. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

First Coordination Polymer of 1,4‐Dihydro‐2,3‐Quinoxalinedione in Ketoamine Tautomeric Form

The first coordination compound of 1,4‐dihydro‐2,3‐quinoxalinedione in ketoamine tautomeric form (denoted as H₂qdione) was reported. H₂qdione was obtained by a solid‐state reaction of o‐phenylenediamine and oxalic acid. Reaction of this ligand with CdCl₂ solvothermally yielded a coordination polymer [Cd(H₂qdione)Cl₂]_n, which was structurally characterized by X‐ray diffraction and IR spectroscopy. Continuous Cd₂Cl₂ diamonds form a double‐sided comb with terminal H₂qdione‐κ²O,O′ as the comb teeth. Interaction of these combs through very extensive π–π stacking, C–H ··· Cl, and N–H ··· Cl hydrogen bonds leads to a novel 3D architecture and significant enhancement of solid‐state luminescence of about 10 times compared to the free H₂qdione ligand.     

Synthesis of 2‐Substituted 3‐Alkylidene‐2,3‐dihydro‐1H‐isoindol‐1‐imines through Cyclization of [1‐(2‐Cyanophenyl)alkylidene]aminide Intermediates Generated from the Reaction of 2‐(1‐Azidoalkyl)benzonitriles with NaH

A convenient sequence for the preparation of 3‐alkylidene‐2,3‐dihydro‐1H‐isoindol‐1‐imine derivatives 6 has been developed. Thus, 2‐(1‐azidoalkyl)benzonitriles 2 , readily accessible from 2‐alkylbenzonitriles, are allowed to react with NaH in DMF at 0° to room temperature to generate [1‐(2‐cyanophenyl)alkylidene]aminide intermediates 3 , of which cyclization and the subsequent rearrangement, followed by alkylation with alkyl halides, affords 2‐substituted 1‐alkylidene‐2,3‐dihydro‐1H‐isoindol‐2‐imines 6 in generally moderate yields.     

Facile Synthesis of Naphtho[2,3‐d]thiazoles,Naphtho[2,3‐e][1,3,4]thiadiazines and Bis(naphtho[2,3‐d]thiazolyl)copper(II) Derivatives from Heteroylthiosemicarbazides

A one step synthesis protocol for the conversion of heteroylthiosemicarbazides and 2,3‐dichloro‐1,4‐naphthoquinone to naphtho[2,3‐d]thiazoles, naphtho[2,3‐e][1,3,4]thiadiazines as well as bis(naphtho[2,3‐d]thiazolyl)copper(II) derivatives is described. The products were conclusively confirmed by single crystal X‐ray analyses. A mechanism for the formation of the products is presented.     

Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

ZnII‐ and AuI‐Catalyzed Regioselective Hydrative Oxidations of 3‐En‐1‐ynes with Selectfluor: Realization of 1,4‐Dioxo and 1,4‐Oxohydroxy Functionalizations

Catalytic 1,4‐dioxo functionalizations of 3‐en‐1‐ynes to (Z)‐ and (E)‐2‐en‐1,4‐dicarbonyl compounds are described. This regioselective difunctionalization was achieved in one‐pot operation through initial alkyne hydration followed by in situ Selectfluor oxidation. The presence of pyridine alters the reaction chemoselectivity to give 4‐hydroxy‐2‐en‐1‐carbonyl products instead. A cooperative action of pyridine and Zn^II assists the hydrolysis of key oxonium intermediate.     

A Study on the Reaction of 1-（3-Pyridyl）-2,2-di-substituted Ethylenes with 1-Benzyl-1,4-dihydronicotinamide

The reaction of a series of 1-（3-pyridyl）-2,2-di-substituted ethylenes with 1-benzyl-1,4-dihydronicotinamide （BNAH） in deaerated acetonitrile produces the corresponding 1-（3-pyridyl）-2,2-di-substituted ethanes in contrast to benzylidenemalononitrile （BM） which does not react with BNAH under the same conditions.     

Semiconducting polymers from triphenylamine derivatives‐benzaldehyde polymers by oxidization with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ)

4‐Tolyldiphenylamine (TDPA) and N,N′‐diphenyl‐N,N′‐bis(4‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine (TPD), were reacted with benzaldehyde (BA) using p‐toluenesulfonic acid as a catalyst to yield linear polymers. The polymers were reacted with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) in tetrahydrofuran (THF) at room temperature. ¹H‐NMR showed that all the methine protons in the residue of BA were completely removed at the mole ratio of repeating unit : DDQ, 2 : 1. The resulting polymers showed good solubility in chloroform or THF. The reacted TDPA‐BA and TPD‐BA polymers gave new UV absorption peaks at 697.0 and 722.5 nm and showed reversible redox potentials about 0.994 and 1.021 V, respectively. Direct current (d.c.) conductivity of the reacted polymers was in the range of 10^?11 S/cm, which is more than two orders higher than the unreacted polymers. The polymer showed pentad split electron spin resonance (ESR) signal, whose concentration was one in 670 or 230 repeating unit for TDPA‐BA and TPD‐BA polymers, respectively. Copyright © 2001 John Wiley & Sons, Ltd.     

One‐Pot Synthesis of 1,4‐Dihydro‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic Acid Derivatives by the Reaction of 2‐Isothiocyanatophenyl Ketones with Lithium Enolates of Acetates and Tertiary Acetamides

The one‐pot synthesis of 4‐aryl‐1,4‐dihydro‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic acid derivatives 2 was achieved in good yields by the reaction of aryl(2‐isothiocyanatophenyl)methanones 1 with lithium enolates of acetates and tertiary acetamides. (2E)‐1‐(2‐Isothiocyanatophenyl)‐3‐phenylprop‐2‐en‐1‐one ( 3 ) gave 1,4‐dihydro‐4‐[(1E)‐2‐phenylethenyl]‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic acid derivatives 4 in good yields as well.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Reaction of 2,3-Dichloro-1,4-naphthoquinone with Some Active Methylene Compounds in Different Basic Media

Reaction of 2,3-dichloro-1,4-naphthoquinone with some active methylene compounds, such as malononitrile and cyanoacetamide, under various basic conditions has been investigated. A mechanism for these reactions is proposed.     

Chain composition dependence of luminescence properties for copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene

The copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene (MEH‐PV) and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene were prepared via the Gilch route with their chain compositions and the reactivity ratios of the monomers estimated by ¹H NMR spectroscopy. The results indicated that the copolymers tended to form an alternative copolymer as the feed ratio of the monomers closed to one‐half. When an individual copolymer solution in tetrahydrofuran was spun‐cast to form a film, the MEH‐PV units were able to attract the like units from the adjacent chains. As a result, the ultraviolet–visible absorption spectrum of the alternative copolymer in film form was broader than the spectra of those with different compositions. The photoluminescence spectra of the copolymers in film form exhibited the characteristic shoulder of poly(2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene), even though the content of MEH‐PV units was not great enough for the formation of repeat units in sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2180–2186, 2003     

Ultrasound‐Assisted Wittig Reaction: A Short,Efficient Synthesis of 2‐Methoxy‐6‐Alkyl‐1,4‐Benzoquinones

A short, efficient synthesis of 2‐methoxy‐6‐alkyl‐1,4‐benzoquinones is described. Ultrasound‐assisted Wittig reaction of alkyltriphenyl phosphonium bromides with o‐vanillin in basic aqueous conditions followed by reduction with Na/n‐BuOH gave 2‐methoxy‐6‐alkylphenols. Oxidation of 2‐methoxy‐6‐alkylphenols with Fremy's salt produced the title compounds.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.