Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Concentrations and distributions of trace and minor elements in Chinese and Canadian coals and ashes

A total of 35 trace and minor elements including some of environmental significance were determined in each of a selection of 15 Chinese and 6 Canadian thermal coals and their ashes by using the SLOWPOKE-2 nuclear reactor facility of the University of Toronto. The concentrations and distributions of these constituents among the coals and their combustion products (viz. ash and volatile matter) are presented together with an interpretation of their significance in relation to the large scale combustion of these coals as thermal fuels in industrialized countries such as China and Canada. The detailed results showed wide variations in trace impurity concentrations (up to a factor of 100 and more) among the coals studied with few large differences between those of Chinese and Canadian origin except that the rare earths, Sc, Th, U, I, and Se were much higher in the former, other halogens, As and Na were lower. Values for elemental enrichment factors (EF) relative to normal crustal abundances indicated that only As(EF=13), Br(5.7), I(16), S(230), Sb(11) and Se(320) were appreciably enriched in coal. During static ashing at 750°C most of the halogens, S and Se were volatilized whereas most other inorganic constituents were highly retained and concentrated in the ash by factors of 6 to 11.     

Hard and soft acids and bases: structure and process

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.     

Vibrational spectra of anhydrous and monohydrated caffeine and theophylline molecules and crystals

Density functional theory and classical molecular dynamics simulations are used to investigate the vibrational spectra of caffeine and theophylline anhydrous and monohydrate molecules and those of their crystalline anhydrous and monohydrated states, with emphasis in the terahertz region of the spectra. To better understand the influence of water in the monohydrate crystal spectra, we analyze the vibrational spectra of water monomer, dimer, tetramer, and pentamer, and also those of liquid water at two different temperatures. In small water clusters, we observe the progressive addition of translational and librational modes to the terahertz region of the spectra. The water spectra predicted by rigid and flexible water models is examined with classical molecular dynamics, and the respective peaks, especially in the terahertz region, are compared with those found in the small clusters. Similar analysis done for caffeine and theophylline monohydrate molecules using density functional theory clearly shows the presence of water modes in the librational states and in the water stretching region. Molecular dynamics of caffeine and theophylline anhydrous and monohydrate crystals reveal the influence of vibrations from the molecule-molecule (caffeine or theophylline) crystal stacks and those from the water-molecule interactions found in the monohydrate molecules and new modes from molecule-molecule, water-molecule, and water-water hydrogen bonding interactions arising from collective effects in the crystal structure. Findings illustrate challenges of terahertz technology for the detection of specific substances in condensed phases.     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Preparation and photolysis of poly-p-ethylacrylophenone and poly-p-chloroacrylophenone and their copolymers with styrene and methyl methacrylate

Poly-p-ethylacrylophenone (PPEtAP) and poly-p-chloroacrylophenone (PPClAP) and their copolymers with styrene (PEtAP/S) and (PClAP/S) and with methyl methacrylate (PEtAP/MMA) and (PClAP/MMA) were prepared. Quantum yields of main-chain scissions at 366 nm at room temperature in benzene solution are of the same order as those of the unsubstituted polyacrylophenone and its copolymers. Substitution with chlorine and ethyl group in the para position compared to the unsubstituted polyacrylophenone and its copolymers leads to an increase of the lifetime for the n–π^* excited triplet state, as is evident from the measured quenching constants of photolysis. The low-temperature emission spectra of the copolymers are similar to the spectra of the model compounds in a polymer film. For the homopolymer, however, the character of the emission spectrum changes considerably.     

Phosphonodifluoromethyl and phosphonothiodifluoromethyl radicals. Generation and addition onto alkenes and alkynes

[reaction: see text] Selanylated difluoromethylphosphonates and difluoromethylphosphonothioates are good precursors to phosphonodifluoromethyl and phosphonothiodifluoromethyl radicals, respectively. When generated in the presence of alkenes and a hydrogen donor, the corresponding alpha,alpha-difluorinated alkylphosphonates or alkylphosphonothioates are produced in fair to good yields. The use of alkynes results in the formation of alpha,alpha-difluorinated allyl derivatives in useful yields. The presence of the sulfur atom in phosphonothiodifluoromethyl radicals usually translates into higher isolated yields.     

Supercomputing and supercomputers for science and engineering in general and for chemistry and biosciences in particular

We start by pointing out relationships between production of information, global simulation, and supercomputing, thus placing our research activities in today's society context. Then we detail the evolution in hardware and software for 1CAP, our experimental supercomputer, which we claim to be especially well suited for supercomputing in science and engineering. A preliminary discussion of 1CAP/3090 (our latest experimental effort) is included. Many examples from different disciplines are provided to verify our assertions. We “prove” our point by presenting an example of global supercomputing. Starting with 3 nuclei and 10 electrons, building up to a single water molecule, then to a few hundred, we learn, for example, about Raman, infrared, and neutron scattering; we then move up to a few hundred thousand molecules to analyze particle flow and obstructions; finally we experiment, but only preliminarily, with a few million particles to learn more on nonequilibrium dynamics as in the Rayleigh-Benard systems. In this way, quantum mechanics is overlapped with statistical mechanics and expanded into microdynamics. The entire paper is finally reanalyzed from a different perspective, presenting rather systematically, even if most briefly, our ideas on “modern” computational chemistry, where quantum mechanics is as much needed as fluid dynamics and graphics. In this section the main computational techniques are analyzed in terms of computer programs and their associated flow diagrams to solve the basic equations using parallel supercomputers.     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Preparation and properties of polyarylates and copolyarylates from phenylindanedicarbonyl chloride and bisphenols

A series of polyarylates having inherent viscosities of 0.4–1.1 dL/g was prepared by the two phase polycondensation of 1,1,3-trimethyl-3-(4-chloroformylphenyl)indanecarbonyl chloride with various bisphenols in an organic solvent–aqueous alkaline solution system in the presence of a phase transfer catalyst. Similarly, copolyarylates of high molecular weights were prepared from a mixture of the phenylindanedicarbonyl chloride, terephthaloyl chloride, and 2,2-bis(4-hydroxy-phenyl)propane. All the polyarylates were characterized by their amorphous nature and high solubility in organic solvents. They gave transparent and tough films by the solution casting. The films had tensile strength of 33–46 MPa, elongation at break of 3–16%, and tensile modulus of 1.2–1.6 GPa. These polyarylates had glass transition temperatures in the range of 205–310°C, and began to decompose at ca. 350°C in air.     

Generation and detection of levuglandins and isolevuglandins in vitro and in vivo

Levuglandins (LGs) and isolevuglandins (isoLGs), formed by rearrangement of endoperoxide intermediates generated through the cyclooxygenase and free radical induced oxidation of polyunsaturated fatty acids (PUFAs), are extraordinarily reactive, forming covalent adducts incorporating protein lysyl ε-amino groups. Because they accumulate, these adducts provide a dosimeter of oxidative injury. This review provides an updated and comprehensive overview of the generation of LG/isoLG in vitro and in vivo and the detection methods for the adducts of LG/isoLG and biological molecules in vivo.     

Antioxidant Properties of Fruit and Vegetable Whey Beverages and Fruit and Vegetable Mousses

The study assesses the antioxidant activity, total phenolic content, total flavonoids content and lipophilic pigments (β-carotene, chlorophyll a, chlorophyll b) content in homemade and marketed fruit and vegetable whey beverages and fruit and vegetable mousses. All of the tests were performed using spectrophotometric methods. The highest polyphenol content was found in the homemade green whey beverage W1G (541.95 mg/100 g) and the lowest in the market green whey beverage W2G (46.18 mg/100 g). In the fruit and vegetable mousses under study, the highest content of polyphenolic compounds was determined in the red mousse R3 (76.41 mg/100 g). The highest content of flavonoids was observed in the homemade orange whey beverage W1O (63.06 mg/100 g) and in the green mousse G2 (69.80 mg/100 g). The values of the antioxidant activity of whey beverages and mousses varied depending on the composition. The highest content of β-carotene was identified in homemade orange whey beverage (4.36 mg/100 g) and in orange mousses (in range 1.10–2.24 mg/100 g), while chlorophylls a and b—in homemade green whey beverage W1G (3.00 mg/100 g and 1.31 mg/100 g respectively) and in green mousses (chlorophyll a in range 0.54 to 1.42 mg/100 g and chlorophyll b in range 0.13 to 0.32 mg/100 g).     

Simultaneous spectrophotometric determination of molybdenum and selenium,and of molybdenum and tellurium

A method is reported for the extraction of molybdenum-phenylfluorone by chloroform. The extraction is complete whether perchlorate ions are present or not but the extractions in the presence of perchlorate ions gave a somewhat more sensitive procedure for the spectrophotometric determination of molybdenum in the solvent phase as the molybdenum-phenylfluorone complex.A procedure is reported for the simultaneous determination of molybdenum and selenium, and molybdenum and tellurium. The method involves first the formation and solvent extraction of the molybdenum-phenylfluorone complex by chloroform in the presence of perchlorate ions, followed by determination of selenium in the remaining aqueous phase as selenium-diethyldithiocarbamate complex after solvent extraction with 2-ethyl-1-hexanol in the presence of perchlorate ions. A similar procedure is reported for the simultaneous determination of molybdenum and tellurium except that in the determination of molybdenum, the phenylfluorone complex is extracted by chloroform in the absence of perchlorate ions. Tellurium is determined in the remaining aqueous phase as tellurium-diethyldithiocarbamate complex after solvent extraction by 2-ethyl-1-hexanol solvent extraction in the presence of perchlorate ions.     

Crystal and molecular structure of aroyl- and acetylhydrazones of acet- and benzaldehydes

Aroyl- and acetylhydrazones of acet- (I) and benzaldehydes (IV) and benzoylhydrazones of acet- (II) and benzaldehydes (III) were studied by x-ray structural and quantum-chemical methods in order to establish their structures. Compund (I) was the EEZ structure in the crystal. Calculations and spectral data showed that the EEE form occurs in nonpolar solvents and in the gas phase. According to crystallographic data molecules (I)–(IV) are the E-isomers (relative to the N-N bond) and the hydrazone fragments are planar. Intermolecular N-H...O H-bonds from in the crystals. The data obtained suggest that the majority of acylhydrazones are conformationally rigid on dissolution although exceptions do occur. Apparently the reasons for the difference of acetyl- and benzoylhydrazones in electrocarboxylation reactions are electronic and not steric factors.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 75–81, January, 1991.     

Chloro- and Bromo-defluorination of Hexafluorobenzene and Octafluorotoluene

Halo(chloro, bromo)defluorination of perfluorobenzaene and toluene efficiently occurs under the action of appropriate alkali metal halides in the presence of hexaethylguanidinium chloride in catalytic amount. The relative efficiency of halide anions and metal cations in these reactions was established.     

软硬酸碱规则与体内微量元素

阐述了ＳＨＡＢ规则,分类,酸碱软硬度的定量标度和理论解释。根据ＳＨＡＢ规则把体内微量元素分为Ｌｅｗｉｓ硬酸,软酸与交界酸和硬碱,软碱与交界碱,体内不同体液和器官含有丰富的软硬配体,与各类软硬酸（金属离子）结合成不同稳定性的配合物,发挥其生物活性作用。     

金、铜金属纳米棒或纳米线的AFM和SERS的研究(英文)

通过电化学氧化法制备具有不同孔径氧化铝模板 ,利用交流电镀的方法在模板中沉积金属 ,再用酸溶解模板可以得到相应尺度的金属纳米线或纳米棒的阵列 .本文利用原子力显微镜和表面增强拉曼技术分别表征了金和铜两种金属纳米线阵列 .研究结果表明 ,作为探针分子的硫氰(SCN )在金属纳米线上的碳氮三键的振动频率随纳米线直径的增大而蓝移 .这一现象可能是因为尺寸效应对纳米线的费米能级造成影响 ,使不同直径的金属纳米线电子结构存在微小的差别 .     

Concentration and vertical distribution of plutonium and americium in Italian mosses and lichens

The plutonium and americium concentration and vertical distribution in some Italian mosses and lichens have been determined. The^239,240Pu,²³⁸Pu and²⁴¹Am concentration ranges in tree trunk lichens 0.83–1.87, 0.052–0.154 and 0.180–0.770 Bq/kg, respectively. The corresponding values in tree mosses are higher and more scattered ranging from 0.321 to 4.96, from 0.029 to 0.171 and from 0.200 to 1.93 Bq/kg. The mean²³⁸Pu/^239,240Pu and²⁴¹Am/^239,240Pu ratios are 0.088±0.037 and 0.38±0.13 in lichens and 0.091±0.072 and 0.54±0.16 in tree mosses. The Pu and Am concentrations are relatively low in terrestrial mosses. The^239,240Pu,²³⁸Pu and²⁴¹Am vertical distributions in a terrestrial moss core (Neckera Crispa) collected near Urbino (central Italy) show an exponential decrease with the height. On the contrary the²⁴¹Am vertical distribution in another terrestrial moss core (Sphagnum Compactum) collected in the Alps (northern Italy) shows an interesting peak at 16 cm which corresponds to the deposition of fallout from the nuclear weapon tests in 1960's. The²⁴¹Am movement upward and downward in the moss core is also studied. The results show once again that both mosses and lichens are very effective accumulators of Pu and Am and that they can be used as good biological indicators of the radionuclide airbome pollution from nuclear facilities and nuclear weapon tests. They can play a very impotant role in cycling naturally or artificially enhanced radionuclides in the atmosphere over long time scales.     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.