Flotation‐Spectrophotometric Determination of Trace Amounts of Thorium

A simple, sensitive and reproducible flotation‐spectrophotometric method for the determination of thorium is reported. The method is based on the ion‐associate formation between thorium, xylenol orange (XO) and cethyltrimethyl ammonium bromide (CTAB) which is floated in the interface of the aqueous phase and n‐hexane by vigorous shaking. By discarding the aqueous solution and n‐hexane, the adsorbed ion‐associate (Th‐XO‐CTAB) on the wall of a separating funnel was dissolved in a small volume of ethanol solvent, and its absorbance was measured at 568 nm. The effects of different parameters such as pH, concentrations of HCl, XO, and CTAB, volume of n‐hexane, and standing and shaking time were studied. The calibration graph was linear in the concentration range of 2–200 ng mL^?1 of thorium(r = 0.9994). The limit of detection (LOD) is 1.4 ng mL^?1. The relative standard deviations (RSD) at 50 and 175 ng mL^?1 of thorium were 2.5% and 1.0% (n = 7), respectively. The method was successfully applied to the determination of thorium in gas mantel samples.     

Simultaneous Spectrophotometric Determination of Uranium and Thorium Using Arsenazo III by H‐Point Standard Addition Method and Partial Least Squares Regression

Simultaneous determination of uranium and thorium using arsenazo III as a chromogenic reagent at pH 1.70 by H‐point standard addition method (HPSAM) and partial least squares (PLS) calibration is described. Under optimum conditions, the simultaneous determinations of uranium and thorium by HPSAM were performed. The absorbencies at one pair of wavelengths, 649 and 669 nm, were monitored with the addition of standard solutions of uranium. The results of applying the HPSAM showed that uranium and thorium can be determined simultaneously with weight concentration ratios of uranium to thorium varying from 20:1 to 1:15 in the mixed sample. By multivariate calibration methods such as PLS, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. In this study, the calibration model is based on absorption spectra in the 600–750 nm range for 25 different mixtures of uranium and thorium. Calibration matrices contained 0.10–21.00 and 0.25–18.5 μg mL^?1 of uranium and thorium, respectively. The RMSEP for uranium and thorium were 0.7400 and 0.7276, respectively. Both proposed methods (HPSAM and PLS) were also successfully applied to the determination of uranium and thorium in several synthetic and real matrix samples.     

Separation behavior of U(VI) and Th(IV) on a cation exchange column using 2,6-pyridine dicarboxylic acid as a complexing agent and its application for the rapid separation and determination of U and Th by ion chromatography

The retention behavior of U and Th as their 2,6-pyridine dicarboxylic acid (PDCA) complexes on a cation exchange column was investigated under low pH conditions. Based on the observed retention characteristics, an ion chromatographic method for the rapid separation of uranium and thorium in isocratic elution mode using 0.08 mM PDCA and 0.24 M KNO(3) in 0.22 M HNO(3) as the eluent was developed. Both uranium and thorium were eluted as their PDCA complexes within 2 min, whereas the transition and lanthanide metal cations were eluted as an unresolved broad peak after thorium. Under the optimized conditions both U and Th have no interference either from alkali and alkaline earth elements up to a concentration ratio of 1:500 or from other elements up to 1:100. The detection limits (LOD) of U and Th were calculated as 0.04 and 0.06 ppm, respectively (S/N=3). The precision in the measurement of peak area of 0.5 ppm of both U and Th was better than 5% and a linear calibration in the concentration range of 0.25-25 ppm of U and Th was obtained. The method was successfully applied to determine U and Th in effluent water samples.     

Flow Injection Spectrophotometric Determination of Dipyrone in Pharmaceutical Formulations Using Fe(III) as Reagent

A flow injection spectrophotometric procedure with symmetric merging zones for dipyrone determination in pharmaceutical formulations is proposed. The determination is based on the formation of a blue complex (monitored at a wavelength of 642 nm) yield in the complexation reaction of dipyrone with Fe(III) in acid medium. Under optimum conditions, a calibration curve was obtained from 3.5 to 281 mg L^?1 with a detection limit of 2.8 mg L^?1 and the samples throughput was 80 h^?1. The analytical results obtained for commercial formulation samples by applying the proposed method were in good agreement with labeled values and those obtained by a comparative procedure at a 95% confidence level.     

Determination of Lanthanide (III) Ions by Using a Flotation - Spectrophotometric Method

Abstract

This paper reports our attempt at determining Ln (III) ions by using a flotation-spectrophotometric method and our findings. When a ternary ion-association complex of Ln (III) coordinated by thiocyanate (SCN^?) and diantipyryl methane (DA[Mdot]) is separated by a mixed solvent containing benzene and chloroform at pH 3.1 – 4.2, a third phase is observed between the aqueous and organic phases. The solid ternary complex can be dissolved in acetone that contains thenoyltrifluoroacetone (TTA). The individual Ln (III) ion can be determined by using the 4th derivative spectra directly. The equilibrium constant of the ternary composition ratio of Ln(II1) to ligand is estimated by the equilibrium shift method. The mole ratio of Ln(II1) to DAM and to SCN^? is 1:3 each. The composition of the tcrnary complex seems to be Ln(III):DAM:SCN^?=1:3:3.     

Solid Phase Extraction of Uranium by Naphthalene‐Methyltrioctylammonium Chloride and Arsenazo(III) Adsorbent and Subsequent Spectrophotometric Determination

A simple and effective method has been presented for the preconcentration of uranium by solid phase extraction. For this purpose arsenazo(III) supported on naphthalene‐methyltrioctylammonium chloride was used as an adsorbent and uranium solution at pH 3.5 with flow rate of 1 mL·min⁻¹ was passed through the column. Therefore, uranium‐arsenazo(III) complex was formed onto column. Uranium was quantitatively eluted with 5 mL of a 0.1% ammonium tetraphenylborate and determined by spectrophotometric method at 652 nm. Several parameters such as pH, amount of reagents, sample volume, etc. were investigated. The effect of diverse ions on the preconcentration has also been studied and the optimized conditions developed have been utilized for the trace determination of uranium. A preconcentration factor of 100 was achieved. The relative standard deviation (N=8) was 0.5% for 3 ng· mL⁻¹ of uranium. The three sigma detection limit (36) was 0.045 ng·mL⁻¹     

Colorimetric detection of uranium(VI) on building surfaces after enrichment by solid phase extraction

A method for detecting and quantifying uranium(VI) levels on building materials that include concrete, Plexiglas, glass and steel surfaces is presented. Uranium(VI) was extracted from building material surfaces using a pH 2.2 buffer rinse and, subsequently complexed by an organic chelating agent, arsenazo III. The application of a uranium-chelating molecule, arsenazo III, allows for concentration enhancement using C₁₈ solid phase extraction and colorimetric detection of the uranium complex using ultraviolet-visible spectroscopy at 654 nm. The method has a detection limit (based on 3σ) of 40 ng/L (5 ng/cm²) and an overall extraction efficiency greater than 80% for each surface type (concrete, Plexiglas, glass, steel). Methods to prevent interference by metal ions commonly found on building materials are discussed.     

Derivative Spectrophotometric Determination of Copper and Palladium Simultaneously by Using MDTC as a Reagent

Abstract

A selective, sensitive, and economical derivative spectrophotometric method has been developed for the determination of trace amount of Cu(II) and Pd(II) with MDTC as a reagent in the presence of CTAB, a solubilizing agent. The molar absorption coefficient and analytical sensitivities of the 1:2 Cu(MDTC)₂ and Pd(MDTC)₂ complexes are 2.467×10⁴ and 2.989×10⁴ l mol^?1, respectively. The developed derivative procedure, is applied for the rapid and selective simultaneous determination of Cu(II) and Pd(II) in the range of 0.2–15 and 0.1–10 µg/ml, respectively. Complex matrices, including alloys, biological samples, pharmaceutical samples and synthetic mixtures have been successfully analyzed for trace amounts of two metal ions.     

Determination of fluoride by spectrophotometry of Arsenazo(III) complex of the back-extracted Th(IV)

A method based on the back-extraction of Th(IV) from its TTA complex in benzene by aqueous F^– followed by spectrophotometric measurement of Th(IV), for the determination of fluoride has been developed. The coefficients of variation obtained are 2.4% and 1.4% in 11 determinations at F^– concentration levels of 1.0 g ml^–1, respectively.     

Determination of the Uranium(VI) and ‐(IV) Species in Uranium Ores

The determination of the two species of uranium(VI and IV) present in 6 uranium ores was studied in relation to the chemical and mineralogical composition, humidity, and pH of the samples taken over from the mine. X‐ray diffraction studies, performed on the uranium ores in powder form allowed to establish their mineralogical composition. Thechemical analysis pointed out the presence, besides the two uranium species, of some microelements able to influence the U^VI/U^IV ratio in minerals and to leach out U^VI as uranyl ions from the corresponding minerals.     

Environmental Analysis of Thorium (IV) by Extractive Separation with N-p-Methoxyphenyl-2-furylacrylohydroxamic Acid and Spectrophotometric Determination with 4-(2-Pyridylazo) Resorcinol

Abstract

Thorium (IV) was separated from several anions and cations commonly associated with it in environmental samples by liquid-liquid extraction with N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) into chloroform at pH 3.6–5.5. The metal was then back-extracted into aqueous media containing 1.8–2.2 M HCl and determined spectrophotometricall) at 500 nm (? = 3.9 × 10⁴ 1 mol^?1 cm^?1) with 4-(2-pyridylazo) resorcinol [PAR]. The method was successfully applied to the analysis of thorium in coal fly ash, monazite, uranium-thorium ore, animal tissue, plant tissue, and natural waters. MFHA and PAR were chosen from thirteen hydroxamic acids and nine pyridylazo reagents, as the reagent combination that provided the maximum selectivity and sensitivity.     

间羧基偶氮羧光度法测定痕量铬的研究

研究了间羧基偶氮羧与Cr2 O2 -7的褪色反应 ,建立了一种新的测定痕量Cr(VI)的光度方法 .发现其在高氯酸介质中具有高灵敏的褪色反应 ,摩尔吸收系数达到 3 .5× 10 6L/mol·cmCr(VI)量在 0～ 48μg范围内符合比尔定律     

Differential estimation of U(VI) and U(IV) ions in aqueous solutions by Arsenazo 1

The spectrophotometric determination of pure U(IV) or U(VI) ions in solution with Arsenazo I is greatly dependant on the pH of the solutions. The experimental conditions for the differential estimation of the different oxidation states of U ions, in the same sample, using Arsenazo I have been identified and implemented. The results showed that the applied method is rather rapid and accurate.     

Spectrophotometric Determination of Trace Chromium(VI) in Mass Chromium(III)

There is little conclusive evidence of the toxic effects of Cr(III) so far, but Cr(VI) has carcinogenic activity, so the analysis of the chromine ions is very important in environmental research and the quality control of industry products. Usually Cr(III) and Cr(VI) interfere with each other in the species analysis, the measurement of Cr(VI) of numerous previous papers is related to the Cr(VI) samples, which contain a little Cr(III). When the amount of trivalent chromine exceeds ten …     

A Simple Sensitive Spectrophotometric Method for the Determination of Ce4+ Using Variamine Blue as a Chromogenic Reagent

A rapid and sensitive spectrophotometric method is described for the determination of trace amounts of cerium using Variamine Blue (VB) as a chromogenic reagent. The proposed method is based on the reaction of cerium with potassium iodide in acidic medium to liberate iodine, which oxidizes Variamine Blue to give a violet colored species with an absorption maximum at 560nm. Beers law was obeyed in the range 2–10µg mL^–1 of cerium. The molar absorptivity and Sandells sensitivity are found to be 1.65×10⁴L mol^–1cm^–1 and 8.48×10^–3µgcm^–2, respectively. The proposed method has been successfully applied to the determination of cerium in alloy and synthetic mixtures.     

The Homoleptic U(NCSe)84– Anion in (Pr4N)4U(NCSe)8·2CFCl3 and Th(NCSe)4(OP(NMe2)3)4·0.5CH3CN·0.5H2O: First Structurally Characterised Actinide Isoselenocyanates

The neutral thorium complex Th(NCSe)₄(OP(NMe₂)₃)₄ and homoleptic octa(isoselenocyanato)uranate anion U(NCSe)₈^4– in (Pr₄N)₄U(NCSe)₈·2CFCl₃ ( 1 ) were synthesised and structurally characterised. (Pr₄N)₄U(NCSe)₈·2CFCl₃ contains the U^IV anion U(NCSe)₈^4– and was characterised using IR spectroscopy and single‐crystal X‐ray diffraction. Th(NCSe)₄(OP(N(CH₃)₂)₃)₄·0.5CH₃CN·0.5H₂O ( 2 ) was characterised using IR and Raman spectroscopy, as well as ³¹P{¹H}, ¹⁵N{¹H}, ¹⁴N{¹H}, ¹³C{¹H}, ¹H and ⁷⁷Se NMR spectroscopy and structurally characterised using single‐crystal X‐ray diffraction. The U(NCSe)₈^4– anion and Th(NCSe)₄(OP(N(CH₃)₂)₃)₄·0.5CH₃CN·0.5H₂O complex are the first structurally characterised actinide‐isoselenocyanates. The crystal structures shows an approximate square antiprismatic arrangement of the ligands around the actinide(IV) atoms.     

Solvent Extraction Separation of Th(IV) and U(VI) with PC-88A

Liquid-liquid extraction of Th(IV) and U(VI) has been investigated by commercial extractant PC-88A in toluene. The optimum conditions for extraction of these metals have been established by studying the various parameters like acid concentration/pH, reagent concentration, diluents and shaking time. The extraction of Th(IV) was found to be quantitative with 0.1–1.0M HNO₃ acid and in the pH range 1.0–4.0 while U(VI) was completely extracted in the pH range 1.0–3.5 with 2.5·10^–2M and 2.·10^–2M PC-88A in toluene, respectively. The probable extracted species have been ascertained by log D-log C plot as ThR₄·4HR and UO₂R₂·2HR, respectively. The method permits separation of Th(IV) and U(VI) from associated metals with a recovery of 99.0%.     

Spectrophotometric Determination of Uranium(VI) with Chlorophosphonazo-mN by Flow Injection Analysis

Abstract

A sensitive and selective spectrophotometric flow injection analysis (FIA) method with chlorophosphonazo-mN has been developed for the determination of uranium(VI) in standard ore samples. Most of interfering ions are effectively eliminated by the masking reagent of diethylenetriaminepentaacetic acid (DTPA). In the U(VI)-chlorophosphonazo-mN system, the maximum absorption wavelength is at 680 nm and Beer's law is obeyed in the range of 1 to 15 μg ml^?1. The correlation coefficient of the calibration curve is 0.9998, the sampling frenquency is 60 h^?1, and the detection limit for uranium(VI) is 0.5 μg ml^?1. The composition of the U(VI)-chlorophosphonazo-nN complex was established to be 1:2 by flow-through spectrophotometric and conventional molar ratios methods.     

Synergistic extraction of Am(III), Th(IV) and U(VI) by PMBP and crown ethers

The extraction of UO ₂ ²⁺ , Am³⁺, and Th⁴⁺ by 1-phenyl-3-methyl-4-benzylpyrazolone with crown ethers was studies using 0.1M (NaClO₄) aqueous phase and toluene. The crown ethers were 12C4, 15C5, 18C6, DB18C6 and DCH18C6. The synergic equilibrium constant did not show correlation between the cationic radii and the ether cavity size nor did the values follow a simple order of ether basicity. The ether basicity, steric effects, and the number of ether oxygens bound to the cation are the combined factors which seemingly determine the pattern of M(PMBP)_n—CE interaction.     

A Novel Method for the Determination of Streptomycin Using Sodium Nitroprusside as a Chromogenic Reagent by Spectrophotometry

Abstract

A rapid and simple spectrophotometric method for the determination of streptomycin has been developed and validated. The method was based on the reaction of streptomycin with sodium nitroprusside in the alkaline medium forming a red product measured at the maximum absorption of 495 nm. The stoichiometric ratio of the product is 1:1. Beer's law is obeyed in a range of 1.87 µg mL^?1 ～ 279.8 µg mL^?1 of streptomycin and ?₄₉₅ is 6.0 × 10³ L·mol^?1 cm^?1.Under the optimum condition, the equation of linear regression is A = 0.00742 + 0.05683 C (× 10⁵ mol·L^?1), with a linear correlation coefficient of 0.9990. The detection limit (3σ/k) is 0.96 µg mL^?1, the relative standard deviation (RSD) is 2.40%, and the average recovery rate is 98.3%–102.7%. Every parameter has been optimized, and the reaction mechanism has been studied. The proposed method has been successfully applied to the determination of streptomycin for injections and tablets of pharmaceutical preparation. Analytical results obtained by this new method were very gratifying.