A Stability-Indicating Spectrophotometric Method for the Determination of Fenoterol in Pharmaceutical Preparations.

ABSTRACT

A simple and highly sensitive spectrophotometric method was developed for the determination of fenoterol hydrobromide in pharmaceutical formulations. The method is based on measurement of the orange-yellow color peaking at 436 nm, produced when the drug is coupled with diazotized benzocaine in triethylamine medium. The method is applicable over the range of 0.5 – 10 μg/ml, with minimum detectability of 3.6 ng/ml (≈ 9.4×10^?9 M). The molar absorptivity is 4.61×10⁴ L. mol^?1. cm^?1. with relative standard error of 0.196%. The proposed method was successfully applied to the determination of fenoterol in its dosage forms; the mean recoveries of 99.61 ± 1.59 and 98.97 ± 1.52 for tablets and aerosols, respectively, were obtained. The results of the proposed method were favorably compared to those obtained by the official and reference methods. No i8543168 was encountered from the co-formulated drug ipratropium bromide, common excipients and alkaline induced degradation product. A proposal of the reaction pathway is presented.     

Flow Injection Analysis of Famotidine with Spectrophotometric Detection

Abstract

A flow injection determination of famotidine has been described. The method is based on the reaction of the drug with cupric acetate to form a blue coloured complex which shows absorption maxima at 314 nm and 630 nm. For an injection volume of 100 μl calibration graphs were rectilinear from 10- 50 μg. ml^?1 and 50–500 μg.ml^?1 of drug at the two wavelengths respectively. Samples could be analysed at rates upto 60 per hour with a relative standard deviation less than 1.4%. The method was evaluated by analysis of the pure drug and commercial formulations. The results compare well with those obtained by official methods.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

Sequential injection spectrophotometric determination of phenylephrine hydrochloride in pharmaceutical preparations

A fully automated sequential injection spectrophotometric method for the determination of phenylephrine hydrochloride in pharmaceutical preparations is reported. The method is based on the condensation reaction of the analyte with 4-aminoantipyrine in the presence of potassium ferricyanide. The absorbance of the condensation product was monitored at 503 nm. A linear relationship between the relative peak height and concentration was obtained in the range 0.5-17.5 mg l⁻¹. The detection limit (as 3σ value) was 0.09 mg l⁻¹ and repeatability was 0.8 and 0.6% at 2.5 and 5 mg l⁻¹, respectively. Results obtained by this method agreed very well with those obtained by the AOAC official method.     

Kinetic Spectrofluorometric Determination of Thioctic Acid in Bulk and Pharmaceutical Preparations via its Oxidation with Cerium(IV)

A highly simple and sensitive kinetic spectrofluorometric method was developed for the determination of thioctic acid. The method is based on the oxidation of the studied drug with cerium(IV) ammonium sulfate in acidic medium. The fluorescence of the produced Ce(III) was measured at 365 nm after excitation at 255 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The method is applicable over the concentration range of 0.02 to 0.12 μg/mL with a detection limit of 6.06 × 10^?3 μg/mL and a quantification limit of 0.02 μg/mL. The method was successfully applied for the assay of the studied drug in pharmaceutical formulations. The results obtained were in good agreement with those obtained with the reference method.     

Flow Injection Spectrophotometric Determination of Dipyrone in Pharmaceutical Formulations Using Fe(III) as Reagent

A flow injection spectrophotometric procedure with symmetric merging zones for dipyrone determination in pharmaceutical formulations is proposed. The determination is based on the formation of a blue complex (monitored at a wavelength of 642 nm) yield in the complexation reaction of dipyrone with Fe(III) in acid medium. Under optimum conditions, a calibration curve was obtained from 3.5 to 281 mg L^?1 with a detection limit of 2.8 mg L^?1 and the samples throughput was 80 h^?1. The analytical results obtained for commercial formulation samples by applying the proposed method were in good agreement with labeled values and those obtained by a comparative procedure at a 95% confidence level.     

Spectrophotometric determination of sulphate in sodium hydroxide solutions by flow-injection analysis

A spectrophotometric flow-injection procedure is described for the determination of sulphate in sodium hydroxide solutions. Sulphate catalyses the reaction between zirconium and methylthymol blue to form a complex measured at 586 nm. Optimal reaction conditions are discussed. The calibration graph is linear over the range 0.05–0.5 g l^?1 sulphate with a relative standard deviation of 0.02. The sample throughput is 20 h^?1. Sulphate is easily determined in 1 M sodium hydroxide; the results agree with those obtained by the conventional gravimetric method and by ion chromatography.     

Flow Injection Analysis of Some Phenolic Sympathomimetic Drugs

ABSTRACT

A new, rapid and economical flow-injection (FI) method for deter-mining some phenolic sympathomimetic drugs is proposed. These drugs are etilefrine hydrochloride (ET), fenoterol hydrobromide (FT), hexoprenaline sulphate (HP), orciprenaline sulphate (OP) and reproterol hydrochloride (R.T). The determination is based on the reaction of the studied phenolic sympathomimetic drugs with 4-aminoantipyrine (4-AAP) and potassium hexacyanoferrate (III). The chemical reaction variables and also the FI variables, were optimized on the basis of sensitivity, sampling rate and reagent consumption. The proposed technique was applied to the analysis of pure raw materials in concentrations ranging from 2-20 μg.ml^?1 in case of ET, 4-30 μg.ml^?1 in case of FT and OP and from 8-50 μg.ml^?1 in case of HP and RT. Samples can be introduced at rates of about 130 per hour. The suggested procedure retained its accuracy and precision when applied to the analysis of pharmaceutical dosage forms containing the corresponding drugs, as judged by the RSD (%) and students' test. The results of the analysis were found to agree statistically with those obtained by applying either the official or the referee methods. Furthermore, the validity of the results was assessed by applying the standard addition technique.     

Determination of 2-Acetyl-1-pyrroline via a Color-Change Reaction Using Chromium Hexacarbonyl

At present, there is no colorimetric method for the quantitation of the aroma compound 2-acetyl-1-pyrroline (2AP). A novel colorimetric method was developed for the determination of 2AP content using chromium hexacarbonyl (Cr(CO)₆) as a reagent. The reaction of synthetic 2AP with chromium hexacarbonyl reagent solution in the presence of light produced a green product with an absorption maximum (λ_max) at 623 nm. GC–MS was used to confirm the color-change reaction, which showed the loss of 2AP after the addition of Cr(CO)₆. This novel method enables facile and cost-effective determination of 2AP in fragrant rice. A comparative analysis of fragrant and nonfragrant rice grain extracts showed that no color-change reaction occurred with the nonfragrant rice sample. A limit of detection (LOD) of 2.00 mg L⁻¹ was determined by method validation with an effective linear concentration ranging from 5.00 to 60.00 mg L⁻¹ of 2AP. The results obtained using the developed colorimetric method were consistent with those obtained by automated static headspace gas chromatography with nitrogen-phosphorus detection (SHS-GC–NPD).     

Kinetic Spectrophotometric Determination of Oxalic Acid Based on the Catalytic Oxidation of Bromophenol Blue by Dichromate

 A sensitive catalytic method is developed for the spectrophotometric determination of oxalic acid. It is based on the catalytic action of oxalic acid on a new indicator reaction – the oxidation of Bromophenol Blue by dichromate in dilute sulfuric acid medium. The reaction rate is monitored spectrophotometrically by measuring the absorbance at 600 nm after quenching the reaction with sodium hydroxide. A calibration graph from 0.1 to 8.0 μg mL⁻¹ of oxalic acid and a detection limit of 0.04 μg mL⁻¹ was obtained. The applicability of this method was demonstrated by the determination of oxalic acid in water extracts from vegetables such as spinach, mushrooms and fresh kidney beans. Received October 18, 1999. Revision June 14, 2000.     

Sensitive Spectrofluorimetric Method of Analysis for Gabapentin in Pure and Pharmaceutical Preparations

Highly sensitive spectrofluorimetric method was developed and validated for the determination of gabapentin in pure and pharmaceutical preparations. The method was based on nucleophilic substitution reaction of gabapentin with 4‐fluoro‐7‐nitrobenzofurazan (NBD‐F) in an alkaline medium (pH 9.5) to form a highly fluorescent derivative that was measured at 521 nm after excitation at 458 nm. The factors affecting the reaction was carefully studied and optimized. The method was successfully validated for linearity, limit of detection, limit of quantification, accuracy, precision, robustness and specificity. Under the optimized conditions, linear relationship with good correlation coefficient (0.9998) was found between the relative fluorescence intensity and gabapentin concentration in the range of 10–100 ng·mL^?1. The limit of detection and limit of quantification were 0.43 and 1.30 ng·mL^?1, respectively. The proposed method was successfully applied to the determination of gabapentin in its pharmaceutical capsules. The results obtained by the proposed method were comparable with those obtained by the official method. Statistical comparison by t‐ and F‐ tests revealed that there was no significant difference between the results of the two methods with respect to mean values and standard deviations at the 95% confidence level.     

Spectrophotometric Determination of Cefadroxil and Metyrosine in Dosage Forms

Abstract

A simple and sensitive spectrophotometric method is described for the determination of cefadroxil and metyrosine in pure form and in pharmaceutical formulations. The method is based on reacting these drugs with 4-aminoantipyrine (AAP) in the presence of an alkaline oxidising agent. The coloured products were measured spectrophotometrically at 500 nm and 470 nm for cefadroxil and metyrosine, respectively. Beer's law was obeyed over the concentration range 1-28 and 2-44 μg ml^-1 for cefadroxil monohydrate and metyrosine, respectively. The molar ratio in both cases was established and a proposal for the reaction pathway was suggested. The percentage recoveries obtained were in accordance with those given by the reference methods.     

Spectrophotometric Determination of Thioctic Acid in its Dosage Forms through Complex Formation with Pd(II)

A simple and sensitive spectrophotometric method has been developed for the determination of thioctic acid in pharmaceutical preparations. The proposed method is based upon the formation of a complex with palladium(II) in acetate buffer of pH 4.8 with an absorption maximum at 318 nm. The absorbance obeyed Beer's law over the range of 2–20 μg mL^?1 with a minimum detection limit of 0.15 μg mL^?1 and molar absorptivity (ζ) of 7 × 10³ L mol^?1.cm^?1. The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. The proposed method was successfully applied to the analysis of commercial tablets and ampoules. The results obtained were in good agreement with those obtained using a reference spectrophotometric method. A proposal of the reaction pathway is presented.     

Determination of direct-bilirubin by a fluorimetric-enzymatic method based on bilirubin oxidase

A method for the determination of direct bilirubin by reaction with bilirubin oxidase (BOx) is reported. The procedure is based on the changes in fluorescence which take place during the enzymatic reaction of BOx with any of the three forms of bilirubin (free, conjugated and with albumin) when the solution is excited at 240 nm and the emission is measured at 440 nm. The change in fluorescence was studied thoroughly. It seems mainly due to the fluorescence of one of the reaction products. A theoretical study was carried out to relate the changes in fluorescence observed to the species taking part in the reaction and to establish some of the enzymatic reaction constants. The optimum reaction conditions were studied for each of the three types of bilirubin together with their analytical characteristics (linear range and precision). Selective determination of direct bilirubin was carried out for various synthetic samples with good results. A linear response up to 7 mg L^–1 of direct bilirubin was obtained. Using optimum conditions, the precision for free and conjugated bilirubin was 3.4% (n = 5) and 3.0% (n = 5), respectively. Received: 24 January 2000 / Revised: 9 May 2000 / Accepted: 15 May 2000     

Synthesis, polymerization and Cu complexation studies of a new styrene derivative of 2-hydroxyacetophenone

A new 5-vinyl-2-hydroxyacetophenone monomer was synthesized using Heck reaction. The monomer was obtained by reacting 5-bromo-2-hydroxyacetophenone with ethylene in a palladium catalyzed reaction. Better yield was obtained at low concentration of the catalyst, high temperature and pressure of the ethylene gas. The monomer was homopolymerized and copolymerized with styrene using free radical solution polymerization techniques and investigated for reactivity ratio, retardation effect of the monomer on the polymerization of styrene. Homopolymer with average molecular weight of 40,391 was found to form binuclear complex with Cu²⁺. The complex was evident from shift in n-π^* transition from 332-378 nm in UV region and appearance of strong absorption at 1578 cm⁻¹ in the IR of the precipitated complex.     

A sequential injection fluorometric procedure for rapid determination of total protein in human serum

A sensitive procedure for the quantification of total protein bovine serum albumen (BSA) in human serum was presented with sequential injection sampling and fluorometric detection. A few microliters of sample and fluorescamine solutions were aspirated into the holding coil to facilitate the reaction of protein with fluorescamine by giving rise to a blue-green-fluorescent derivative. The derivative was afterwards excited by a 400 nm radiation from a UV radiator, and the emitted fluorescence was monitored at the wavelength of 470 nm. By loading 5.0 μl of sample and 4.0 μl of fluorescamine solution 0.075% (m/v), a linear calibration graph was obtained within 0.3-12.5 μg ml⁻¹, and a detection limit (3σ) of 0.1 μg ml⁻¹ was achieved, along with a sampling frequency of 40 h⁻¹ and a R.S.D. value of 2.1% at the 5.0 μg ml⁻¹ levels. Protein contents in human serums were analyzed by using the present procedure, and reasonable agreements were obtained with those obtained by a documented spectrophotometric (Biuret) method.     

Pulse radiolysis study of dithio-oxamide in aqueous solutions

The reactions of e⁻ _aq, H-atoms, OH radicals and some one electron oxidants and reductants were studied with dithio-oxamide (DTO) in aqueous solutions using pulse radiolysis technique. The transient species formed by the reaction of e⁻ _aq with DTO at pH 6.8 has an absorption band with λ _max at 380 nm and is reducing in nature. H-atom reaction with DTO at pH 6.8 also produced the same transient species. The semi-reduced species was found to be neutral indicating that the electron adduct gets protonated quickly. However at pH 1, the species produced by H-atom reaction had a different spectrum with λ _max at 360 and 520 nm. Reaction of acetone ketyl radicals and CO₂ ⁻ radicals with DTO at pH 6.8 gave transient spectra which were identical to that obtained by e⁻ _aq reaction. However at pH 1, the spectrum obtained by the reaction of acetone ketyl radicals with DTO was similar to that obtained by H-atom reaction at that pH. The transient species formed by OH radical reaction with DTO in the pH range 1–9.2 also has two absorption maxima at 360 and 520 nm. This spectrum was identical with the spectrum obtained by H-atom reaction at pH 1. This means that all these radicals viz. OH, H-atom and (CH₃)₂COH radicals react with DTO at pH 1 by H-abstraction mechanism. The transient species produced was found to be sensitive to the presence of oxygen. One-electron oxidizing radicals such as Br₂ ^−· and SO₄ ^−· radicals reacted with DTO at neutral pH to give the same species as produced by OH radical reaction having absorption maxima at 360 to 520 nm. At acidic pHs, only Br₂ ^−· and Cl₂ ^−· radicals were able to oxidize DTO to give the same species as produced by OH radical reaction. The semioxidized species is a resonance stabilized species with the electron delocalized over the-N-C-S bond. This species was found to be neutral and non-oxidizing in nature.     

Kinetic–Spectrophotometric Determination of Trace Silver(I) Using Its Catalytic Effect on the Oxidation Reaction of Fuchsin by Peroxodisulfate in the Presence of 1,10-Phenanthroline As an Activator

A kinetic spectrophotometric method for the determination of trace amounts of Ag(I) in the range of 2–20 ng mL^–1 is reported. The method is based on the catalytic effect of Ag(I) on the oxidation reaction of fuschin by potassium peroxodisulfate in the presence of 1,10-phenanthroline as an activator at pH = 5. The reaction is followed spectrophotometrically by measuring the change in absorbance (A) at 544 nm using a fixed time method (6 min). The reaction variables were optimized in order to achieve the highest sensitivity. The 3s criterion detection limit was 0.7 ng mL^–1, and the relative standard deviation for ten replicate measurements of 16 ng mL^–1 of Ag(I) was 0.95% (n = 10). The method was successfully applied to the determination of silver in expired black and white photographic films and results showed good agreements with those obtained by atomic absorption spectrometry.     

Spectrophotometric determination of triclosan in personal care products

A spectrophotometric method for the determination of triclosan in personal care products was proposed. It was based on the reaction of sodium nitrite with p-sulfanilic acid in an acidic medium to form diazonium ion, with which triclosan further formed an azo compound in an alkaline medium. The resulting yellow colored product has a maximum absorption at 452 nm. A good linear relationship (r = 0.9999) was obtained in the range of 0–30 mg L⁻¹ triclosan. A detection limit of 0.079 g L⁻¹ was achieved and the relative standard deviation was 0.24% (n = 11) at 14 mg L⁻¹ triclosan. The proposed method has been applied to the analyses of triclosan in several personal care products and the results were in good agreement with those obtained by high-performance liquid chromatography.     

Determination Of SE(IV) in the Presence of SE(VI) at NG ML− Concentration Levels by a Kinetic Spectrophotometric Method

ABSTRACT

The catalytic effect of Se(IV) on the reduction reaction of thionine(TN) by sulfide ion is used for determination of trace amounts of selenium(IV) ion by a kinetic-spectrophotometric method. This new method is simple and highly sensitive. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the reaction mixture at 598 nm. The fixed time method was used for the first 45s from initiation of the reaction. Under the optimum conditions, in the concentration range of 2-90 ng ml^? of selenium(IV), a quite linear regression equation (r = 0.9984, n = 14) was obtained. The experimental detection limit of the method (S/N = 3) was 1.3 ng ml^?. The relative standard deviation of ten replicate measurements is 2.51% for a 40 ng ml^? solution of selenium. The proposed method is used to the study of selenium (IV,VI) speciation in water at ng ml^? levels. This method was extended for the determination of selenium in real samples.