Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Synthesis and spectroscopic investigation of π‐conjugated (E)‐enyne polycarbazole with different organo‐metallic catalysts from 3,6‐diethynyl‐9‐(2‐ethylhexyl)carbazole

In the present study, a new (E)‐rich‐enyne π‐conjugated polymer containing a carbazole was designed and synthesized. Two different synthesis methods of poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene‐(E)‐vinylene] (PCZEV) have been prepared from 3,6‐diethynyl‐9(2‐ethylhexyl)carbazole by using the palladium‐carbene‐catalyzed reaction and/or by using the organolanthanide‐catalyzed reaction leading to well‐defined polymer, and their general properties were studied. Compared to poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene] (PCE), the UV‐vis absorption and photoluminescence of the PCZEV was red‐shifted, which indicates the extension of conjugation length. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2434–2442, 2009     

Synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with Ziegler–Natta,rhodium, and palladium complexes

The synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene was carried out with a homogeneous vanadium acetylacetonate/aluminum triethyl catalyst system, a bis(rhodium chloride cycloocta‐1,5‐diene) complex, and a palladium/trimethylsilyl complex. In all cases, the main fraction was a polymer with a stereoregular structure. The polymerization with the vanadium catalyst gave a polymer fraction in a low yield. The polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with the soluble rhodium complex gave a polymer in a high yield. The soluble palladium/chlorotrimethylsilane complex gave a polymer in a good yield. On the basis of the spectroscopic data, the poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} obtained, in all cases, showed a cis–transoidal stereoregular structure. The molecular mass of poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} was determined by the matrix‐assisted laser desorption/ionization time‐of‐flight technique. The kinetics of the reaction were analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6438–6444, 2005     

Facile Synthesis of Nitrogen Tetradentate Ligands and Their Applications in CuI‐Catalyzed N‐Arylation and Azide–Alkyne Cycloaddition

Five new tetradentate ligands [NNNN] with benzimidazolyl‐imine or amine nitrogen donors have been synthesized in good yields under mild conditions from easily available substrates. trans‐N,N′‐bis(1‐Ethyl‐2‐benzimidazolylmethylene)cyclohexane‐1,2‐diimine is the best accelerating ligand in this series that supports the Cu^I‐catalyzed Ullmann N‐arylation and the direct three‐component azide–alkyne cycloaddition reaction to give the corresponding substituted imidazole, pyrazole, and triazole in high yields. Single‐crystal X‐ray diffraction analysis of its complex with CuI reveals a novel one‐dimensional coordination polymer of the metal chain bridged alternately by the [NNNN] ligand and diiodides.     

New Chiral N,S—Ligands with Thiophenyl at Benzylic Position.Palladium（Ⅱ）—catalyzed Enantioselective Allylic Alkylation

New chiral N,S-ligands with oxazoline and thiophenyl sub-stituents at benzene ring and benzylic postition have been pre-pared and applied in palladium-catalyzed asymmetric allylic alkylation reaction to provide the product with high yield and entantioselectivity (82%-93%)ee.     

Helical poly(phenylacetylene) derived from L‐tyrosine: A promising candidate for functional helical polymers carrying transformable N‐ and C‐termini

A novel optically active phenylacetylene derivative, N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine methyl ester ( 1 ), was synthesized from L ‐tyrosine and polymerized with a rhodium catalyst. The corresponding polymer [poly( 1 )] with a moderate molecular weight was obtained in a high yield. The alkaline hydrolysis of poly( 1 ) gave poly[N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine] [poly( 2 )] carrying free carboxy groups. Polarimetric, CD, and UV–vis spectroscopy analyses revealed that poly( 1 ) took a predominantly one‐handed helical structure in MeOH and toluene, and poly( 2 ) took a helical structure in MeOH. The secondary structures of poly( 1 ) and poly( 2 ) could be tuned with heat and solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1691–1698, 2007     

N‐chloro amides,lactams, carbamates,and imides. New classes of initiators for the metal‐catalyzed living radical polymerization of methacrylates

Metal‐catalyzed living radical polymerization of methyl methacrylate initiated with N‐chloro amides (N‐chloro N‐ethyl propionamide, N‐chloro benzanilide, N‐chloro methylbenzamide, and N‐chloro acetanilide), lactams (N‐chloro caprolactam and N‐chloro 2‐pyrrolidinone), carbamates or urethanes (N‐chloro ethylcarbamate or N‐chlorourethane), imides (N‐chloro phtalimide, N‐chloro succinimide, trichloroisocyanuric acid, and N‐chloro saccharin) and catalyzed with the self‐regulated catalytic system Cu₂S/2,2′‐bipyridine is reported. The initiation efficiency of these initiators is determined by their structure. Regardless of the initiator efficiency, in all cases, poly (methyl methacrylate) with narrow molecular weight distribution and functionalized chain‐ends was obtained. These new classes of initiators open new strategies for the functionalization of polymer chain‐ends and for the synthesis of complex architectures by graft copolymerization initiated from N‐chloro proteins, aliphatic, aromatic and semiaromatic polyamides, and polyurethanes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5283–5299, 2005     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Amine‐bridged bis(phenol) ligands for efficient Pd‐catalyzed aqueous C‐C coupling reactions

The influence of ring size ( 5 or 6 ), chain length ( 1 , 2 or 3 ) and bulkiness of N‐aryl substituents in amine‐bridged bis(phenol) ligands ( 1 , 2 , 3 ) on palladium‐catalyzed aqueous C‐C coupling reactions were revealed. The homocoupling of arylboronic acid can be completed in neat water with the aid of a catalytic amount of p‐toluenesulfonyl chloride (TsCl) in a very short time under anaerobic or aerobic conditions. Interestingly, the same catalytic system was efficient for Suzuki–Miyaura reaction in aqueous acetone under aerobic conditions in the absence of TsCl. The crystal structures of ligand 1 and three unsymmetrical fluorine‐substituted biaryl derivatives were also reported. Copyright © 2013 John Wiley & Sons, Ltd.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Synthesis and luminescence of poly(phenylacetylene)s with pendant iridium complexes and carbazole groups

Poly(phenylacetylene)s containing pendant phosphorescent iridium complexes have been synthesized and their electrochemical, photo‐ and electroluminescent properties studied. The polymers have been synthesized by rhodium‐catalyzed copolymerization of 9‐(4‐ethynylphenyl)carbazole (CzPA) and phenylacetylenes (C∧N)₂Ir(κ²‐O,O′‐MeC(O)CHC(O)C₆H₄C?CH‐4) (C∧N = κ²‐N,C¹‐2‐(pyridin‐2‐yl)phenyl (Ir^ppyPA) or κ²‐N,C¹‐2‐(isoquinolin‐1‐yl)phenyl (Ir^piqPA)). In addition, organic poly(phenylacetylene)s with pendant carbazole groups have been synthesized by rhodium‐catalyzed copolymerization of CzPA and 1‐ethynyl‐4‐pentylbenzene. Complex (C∧N)₂Ir(κ²‐O,O′‐MeC(O)CHC(O)Ph) (Ir^piqPh; C∧N = 2‐(isoquinolin‐1‐yl)phenyl‐κ²‐N,C¹) was prepared and characterized. While the copolymers of the Ir^ppy series were weakly phosphorescent, those of the Ir^piq series displayed at room temperature intense emissions from the carbazole (fluorescence) and iridium (phosphorescence) emitters, being the latter dominant when the spectra were recorded using polymer films. Triple layer OLED devices employing copolymers of the Ir^piq series or the model complex Ir^piqPh yielded electroluminescence with an emission spectra originating from the iridium complex and maximum external quantum efficiencies of 0.46% and 2.99%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3744–3757, 2010     

Facile synthesis of soluble aromatic poly(amide amine)s via C–N coupling reaction: Characterization,thermal, and optical properties

Aromatic poly(amide amine)s (APAAs), as novel high‐performance polymers, have been obtained by the condensation polymerization of N,N'‐bis(4‐bromobenzoyl)‐p‐phenylenediamine with two different primary aromatic diamines via palladium‐catalyzed aryl amination reaction. The structures of the polymers are characterized by means of FTIR, ¹H NMR spectroscopy, and elemental analysis, the results show a good agreement with the proposed structures. DSC and TGA measurements exhibit that polymers possess high glass transition temperature (T_g > 240 °C) and good thermal stability with high decomposition temperatures (T₅ > 400 °C). These novel polymers also display good solubility. In addition, due to its special structure, APAA‐2 is endowed with significantly strong photonic luminescence in N,N‐dimethylformamide and good electroactivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4845–4852     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Novel family of triphenylamine‐containing,hole‐transporting,amorphous, aromatic polyamides with stable electrochromic properties

We report the preparation and characterization of a series of novel electrochromic, aromatic poly(amine amide)s with pendent triphenylamine units. The synthesis proceeded via direct phosphorylation polycondensation between a novel diamine, N,N‐bis(4‐aminophenyl)‐N′,N′‐diphenyl‐1,4‐phenylenediamine, and various aromatic dicarboxylic acids. All the poly(amine amide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability and 10% weight‐loss temperatures above 540 °C. Their glass‐transition temperatures were 263–290 °C. These polymers in N‐methyl‐2‐pyrrolidinone solutions exhibited strong ultraviolet–visible absorption peaks at 307–358 nm and photoluminescence peaks around 532–590 nm in the green region. The hole‐transporting and electrochromic properties were studied with electrochemical and spectroelectrochemical methods. Cyclic voltammograms of poly(amine amide) films prepared by the casting of polymer solutions onto an indium tin oxide coated glass substrate exhibited two reversible oxidation redox couples at 0.65 and 1.03 V versus Ag/AgCl in an acetonitrile solution. All the poly(amine amide)s showed excellent stability with respect to their electrochromic characteristics; the color of the films changed from pale yellow to green and then blue at 0.85 and 1.25 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2085–2098, 2005     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Palladium‐Catalyzed Direct C2 Arylation of N‐Substituted Indoles with 1‐Aryltriazenes

A novel and efficient palladium‐catalyzed C2 arylation of N‐substituted indoles with 1‐aryltriazenes for the synthesis of 2‐arylindoles was developed. In the presence of BF₃ ? OEt₂ and palladium(II) acetate (Pd(OAc)₂), N‐substituted indoles reacted with 1‐aryltriazenes in N,N‐dimethylacetamide (DMAC) to afford the corresponding aryl–indole‐type products in good to excellent yields.     

Iridium complex grafted to 3,6‐carbazole‐alt‐tetraphenylsilane copolymers for blue electrophosphorescence

We designed a 3,6‐dibromo‐9‐hexyl‐9H‐carbazole derivative with the blue emissive iridium complex bis[2‐(4,6‐difluorophenyl)pyridyl‐N,C^2′](picolinato)iridium(III) (FIrpic) linked at the alkyl terminal. Based on this monomer, novel 3,6‐carbazole‐alt‐tetraphenylsilane copolymers grafted with FIrpic were synthesized by palladium‐catalyzed Suzuki coupling reaction, and the content of FIrpic in the polymers could be controlled by feed ratio of the monomers. The polymer films mainly show blue emission from FIrpic, and the emission intensity from the polymer backbones is much weaker compared with the doped analogues, which demonstrates an efficient energy transfer from polymeric host to covalently bonded guest. The phase separation in the polymers was suppressed, which can be identified by atomic force microscopy and designed electroluminescent (EL) devices. EL devices based on the polymers exhibited blue phosphorescence from FIrpic. The luminous efficiency of preliminary devices reached 2.3 cd/A, and the efficiency roll‐off at high current densities was suppressed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1859–1865, 2010     

Novel thermally stable poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s for luminescent and electrochromic materials

We describe the preparation, characterization, and luminescence of four novel electrochromic aromatic poly(amine hydrazide)s containing main‐chain triphenylamine units with or without a para‐substituted N,N‐diphenylamino group on the pendent phenyl ring. These polymers were prepared from either 4,4′‐dicarboxy‐4″‐N,N‐diphenylaminotriphenylamine or 4,4′‐dicarboxytriphenylamine and the respective aromatic dihydrazide monomers via a direct phosphorylation polycondensation reaction. All the poly(amine hydrazide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent and flexible films with good mechanical properties. These poly(amine hydrazide)s exhibited strong ultraviolet–visible absorption bands at 346–348 nm in N‐methyl‐2‐pyrrolidone (NMP) solutions. Their photoluminescence spectra in NMP solutions or as cast films showed maximum bands around 508–544 and 448–487 nm in the green and blue region for the two series of polymers. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. All obtained poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s exhibited two reversible oxidation redox couples at 0.8 and 1.24 V vs. Ag/AgCl in acetonitrile solution and revealed excellent stability of electrochromic characteristics, changing color from original pale yellow to green and then to blue at electrode potentials of 0.87 and 1.24 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3245–3256, 2005     

Alkene‐Directed N‐Attack Chemoselectivity in the Gold‐Catalyzed [2+2+1]‐Annulations of 1,6‐Enynes with N‐Hydroxyanilines

Kinetically unstable nitrones are generated from gold‐catalyzed reactions of 1,6‐enynes with N‐hydroxyanilines, and subsequently trapped by tethered alkenes to furnish [2+2+1]‐annulations. Our experimental data reveal that such nitrones arise from atypical N‐attack chemoselectivity that is triggered by tethered alkenes to facilitate the key protodeauration reaction.     

Symmetric and dissymmetric N‐heterocyclic carbene rhodium(I) complexes: a comparative study of their catalytic activities in transfer hydrogenation reaction

Six new [RhBr(NHC)(cod)] (NHC = N‐heterocyclic carbene; cod = 1,5‐cyclooctadiene) type rhodium complexes ( 4–6 ) have been prepared by the reaction of [Rh(μ‐OMe)(cod)]₂ with a series of corresponding imidazoli(in)ium bromides ( 1–3 ) bearing mesityl (Mes) or 2,4,6‐trimethylbenzyl (CH₂Mes) substituents at N¹ and N³ positions. They have been fully characterized by ¹ H, ¹³ C and heteronuclear multiple quantum correlation NMR analyses, elemental analysis and mass spectroscopy. Complexes of type [(NHC)RhBr(CO)₂] (NHC = imidazol‐2‐ylidene) ( 7b–9b ) were also synthesized to compare σ‐donor/π‐acceptor strength of NHC ligands. Transfer hydrogenation (TH) reaction of acetophenone has been comparatively studied by using complexes 4–6 as catalysts. The symmetrically CH₂Mes‐substituted rhodium complex bearing a saturated NHC ligand ( 5a ) showed the highest catalytic activity for TH reaction. Copyright © 2012 John Wiley & Sons, Ltd.