Electrochemical determination of electroinactive guests of β-cyclodextrin at a self-assembled monolayer interface

A novel determination method of electroinactive molecules by means of electrochemical technique is presented. A new self-assembled monolayer containing cyclodextrin (CD) is prepared with mono(6-o-p-tolylsulfonyl)-β-cyclodextrin. Although this derivatization process leads to a β-CD coverage of 10% of a full monolayer, this layer shows an effective host-guest response to ferrocene. The interfacial ferrocene complexation gives a response similar to that expected for a Langmuir adsorption isotherm yielding a stability constant of 4.2 ×104 mol-1· L and a maximum ferrocene coverage of 8.6×10-12 mol/cm2. The redox peak currents of the surface-confined ferrocene decrease upon addition of competing β-CD guest species to the solution, such as m-toluic acid (mTA) and sodium dodecyl sulfonate (SDS). This principle has been used for the determination of the electroinactive molecules, mTA and SDS in the concentration ranges of 0.8-2.7 μmol/L and 5-100 nmol/L, respectively.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Electrochemical behavior of uric acid at a penicillamine self-assembled gold electrode

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The electrode can enhance the electrochemical response of uric acid (UA), and the electrochemical reaction of UA on the PCA electrode has been studied by cyclic voltammetry and differential pulse voltammetry. Some electrochemical parameters, such as diffusion coefficient, standard rate constant, electron transfer coefficient and proton transfer number have been determined for the electrochemical behavior on the PCA self-assembled monolayer electrode. The electrode reaction of UA is an irreversible process, which is controlled by the diffusion of UA with two electrons and two protons transfer at the PCA/Au electrode. In phosphate buffer (pH 5.0), the peak current is proportional to the concentration of UA in the range of 6.0 × 10⁻⁵–7.0 × 10⁻⁴ mol L⁻¹ and 2.0 × 10⁻⁵–7.0 × 10⁻⁴ mol L⁻¹ for the cyclic voltammetry and differential pulse voltammetry methods with the detection limits of 5.0 × 10⁻⁶ and 3.0 × 10⁻⁶ mol L⁻¹, respectively. The method can be applied to determine UA concentration in real samples.     

2-巯基苯并噻唑自组装膜电极同时测定米吐尔和对苯二酚

在环境污染物中酚类物质由于其难降解和有毒性而引起人们普遍的关注。测定米吐尔和对苯二酚的常用方法有光度法、铈量法和电化学法。但在电化学法测定中较低倍含量的米吐尔会对对苯二酚的测定带来影响,所以同时准确测定较难。本文利用2-巯基苯并噻唑自组装电极对米吐尔和对苯二酚进行同时测定。应用于显影废水测定结果满意,方法简便快速,有实际应用前景。     

Sensitive voltammetric detection of clomipramine at 16-mercapto-hexadecanoic acid self-assembled monolayer modified gold electrode

Clomipramine, an effective and important antipsychotic drug with low redox activity and poor hydrophilicity, was found to effectively accumulate on hydrophobic 16-mercaptohexadecanoic acid (i.e. MHA) self-assembled monolayer (SAM) modified gold electrode (i.e. MHA/Au) and generating a sensitive anodic peak at about 0.86 V (vs. SCE) in 0.05 M Tris–HCl (pH = 8.1) buffer solution. Thus, quantitative measurement of clomipramine was established with high sensitivity under optimum conditions. The anodic peak current was linear to clomipramine concentration in the range from 1 × 10⁻⁶ to 5 × 10⁻⁵ M, with a detection limit of 6 × 10⁻⁹ M. This method was successfully applied to the detection of clomipramine in drug tablets and proved to be reliable compared to UV. The spectral features, electrochemical characteristics and wettability of MHA-SAM were also studied. Correspondence: Jilie Kong, Department of Chemistry, Fudan University, Shanghai 200433, P.R. China     

Label-free detection of DNA molecules on the dendron based self-assembled monolayer by electrochemical impedance spectroscopy

We report preparation of a novel platform for effective DNA hybridization and its application to the detection of single mismatched DNA. Cone-shaped dendrimer molecules have been immobilized on the gold surface at equidistance, 3.1 nm, from each other with a probe DNA molecule attached to the top of each dendrimer so that enough space would be secured for effective hybridization. This arrangement allows each probe DNA molecule to form a natural DNA double helix upon hybridization with a target DNA molecule. The single nucleotide polymorphism at either the central or end position of the 25-mer target DNA has been shown to be effectively discriminated against on this platform from each other as well as from a complementary DNA by electrochemical impedance measurements. We also report adverse effects exerted by probe ions, Fe(CN)₆^3−/4−, on DNA hybridization reactions. The significance of the results for the use in DNA analysis is discussed.     

Thin self-assembled monolayer for voltammetrically monitoring nicotinic acid in food

A novel and sensitive method for the determination of nicotinic acid was proposed and based on voltammetric behavior of nicotinic acid on a self-assembled monolayer of mercaptoacetic acid coated gold electrode. The adsorption-controlled anodic peak current for the oxidation of nicotinic acid on mercaptoacetic acid covered gold electrode was affected by the type and pH value of supporting electrolyte and by accumulation potential as well as by accumulation time, and enhanced linearly with the concentration of nicotinic acid in the range of 0.8 mM–0.45 μM with a detection limit of 0.14 μM. The proposed method was utilized successfully for the monitoring of nicotinic acid in food. The possible interaction of nicotinic acid with mercaptoacetic acid, which is responsible for the enhanced response of nicotinic acid on modified electrode, was also suggested.     

Electrochemical kinetic analysis of a 1,4-hydroxynaphthoquinone self-assembled monolayer

Electroactive 5-hydroxy-3-hexanedithiol-1,4-naphthoquinone (JUG_thio) has been self-assembled on gold. Electrochemical results show the surface coverage is 2.2 × 10⁻¹⁰ mol cm⁻², which is consistent with a dense monolayer. The JUG_thio shows one quasi-reversible and stable voltametric wave in aqueous buffered solution. A kinetic analysis of the redox reactions involving both electron and proton transfer has revealed an unusual behaviour of this molecule due to the presence of the hydroxyl function in the vicinity of the quinone group. The apparent kinetic rate constant and the anodic coefficient transfer of this reaction depend on the pH. In acid medium, a classical concerted 2e⁻/2H⁺ mechanism is obtained. In basic medium (pH > 7), strong intramolecular hydrogen interactions between the quinone and the hydroxyl function have a strong influence on the redox kinetics. These results show that JUG_thio electroactivity is very sensitive to hydrogen interactions in neutral and basic pH solution and is able to act as sensitive layer for electrochemical biosensing.     

Application of 2-mercaptobenzothiazole self-assembled monolayer on polycrystalline gold electrode as a nanosensor for determination of Ag(I)

Fabrication and application of a voltammetric sensor based on gold 2-mercaptobenzothiazole self-assembled monolayer (Au-MBT SAM) for determination of silver ion is described. Preliminary experiments were performed to characterize the monolayer. The surface pK_a determined for the MBT monolayer is 7.0. This value was obtained by impedimetric titration of the monolayer in the presence of Fe(CN)₆^3−/4− as a redox probe. The extent of surface coverage was evaluated as 1.52 × 10⁻⁹ mol cm⁻² based on charged consumed for reductive desorption of the monolayer in the 0.50 M NaOH solution. Then the sensor was used for determination of Ag(I) by square wave voltammetry. The parameters affecting the sensor response, such as pH and supporting electrolyte, were optimized. A dynamic calibration curve with two linear parts was obtained in the concentration ranges of 5 × 10⁻⁸-8 × 10⁻⁷ and 1 × 10⁻⁶-1 × 10⁻⁵ M of Ag(I). The detection limit adopted from cathodic striping square wave voltammetry was as 1 × 10⁻⁸ M for n = 7. Furthermore, the effect of potential interfering ions on the determination of Ag(I) was studied, and an appropriate method was used for the elimination of this effect.     

Development of a myoglobin impedimetric immunosensor based on mixed self-assembled monolayer onto gold

Immunosensors rely on antibody-antigen binding with a range of possible detection methodologies. In this study, electrochemical impedance spectroscopy was used to monitor the sensor surface assembly and recognition of the analyte (myoglobin). Myoglobin is rapidly released into the circulatory system after an acute myocardial infarction and rapidly rising levels make it the first biochemical marker of myocardial damage. The immunosensor fabrication steps comprised the steps of (a) formation of mixed self-assembled monolayers (mSAM) on gold electrodes using a mixture of biotinyl-phospholipid and mer captohexadecanoic acid; (b) neutravidin functionalisation and (c) attachment of biotinyl anti-myoglobin antibodies. A range of analyte concentration (10⁻¹²–10⁻⁶ M) was successfully detected in phosphate buffered saline and in serum concentration ranging from 10% (v/v) to 100% (v/v) serum. Quartz crystal microbalance and atomic force microscopy studies were carried out to study each step of fabrication to elucidate binding characteristics and surface topography. Correspondence: Morsaline Billah, Institute of Membrane and Systems Biology, Garstang Building, University of Leeds, Woodhouse Lane, Leeds LS2 9JT, United Kingdom     

Sensitive determination of iron(III) by gold electrode modified with 2-mercaptosuccinic acid self-assembled monolayer

Preparation and application of gold 2-mercaptosuccinic acid self-assembled monolayer (Au-MSA SAM) electrode for determination of iron(III) in the presence of iron(II) is described by cyclic voltammetry, electrochemical impedance spectroscopy, and Osteryoung square wave voltammetry. The square wave voltammograms showed a sharp peak around positive potentials +0.250 V that was used for construction of the calibration curve. Parameters influencing the method were optimized. A linear range calibration curve from 1.0 × 10⁻¹⁰ to 6.0 × 10⁻⁹ M iron(III) with a detection limit of 3.0 × 10⁻¹¹ M and relative standard deviation (R.S.D.) of 6.5% for n = 8 at 1.0 × 10⁻⁹ M iron(III) was observed in the best conditions. Possible interferences from the coexisting ions were also investigated. The results demonstrated that sensor could be used for determination of iron(III) in the presence of various ions. The validity of the method and applicability of the sensor were successfully tested by determining of iron(III) in natural waters (tap and mineral waters) and in a pharmaceutical sample (Venofer^® ampoule) without interference from sample matrix. The experimental data are presented and discussed from which the new sensor is characterized.     

Electrochemical Impedance Study of Schiff Base by Means of Self-assembled Monolayer

Schiff base and its metal complex have attracted much attention because of their wide applications in biomedicine and their specific character in photochromic field1. Up to now, reports about Schiff base mainly covered its synthesis and structure2,3. To the best of our knowledge, there is no paper dealing with Schiff base using electrochemical impedance spectroscopy technique by forming self-assembled monolayer. The complexation of Schiff base with the transition metal ions has been confir…     

2，3-二巯基乙二酸自组装膜修饰电极测定对苯二酚

研究了DMSA自组装膜的组装过程及电化学行为.DMSA自组装膜对于对苯二酚的氧化还原能够起到明显的电催化作用.在pH 6.4的H3PO4缓冲溶液中,氧化、还原峰电流与对苯二酚的浓度在6.0×105～1.0×10-3 mol/L范围内呈良好的线性关系,检出限达8.0×10-7mol/L.该电极可用于模拟废水样的测定.     

Electrochemical Behavior of Uric Acid and Epinephrine at a Meso-2,3-Dimercaptosuccinic Acid Self-Assembled Gold Electrode

A self-assembled electrode with a meso-2,3-dimercaptosuccinic acid (DMSA) monolayer has been characterized by electrochemical quartz crystal microbalance and complex impedance analysis, surface enhanced Raman spectroscopy and cyclic voltammetry. The self-assembled electrode was used for the simultaneous electrochemical detection of epinephrine (EP) and uric acid (UA) in phosphate buffer of pH 7.7. The simultaneous oxidation of EP and UA was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), and the signals for each method were well separated with a potential difference of over 330 mV and without interference by each other. The detection limit of EP is 5.4 × 10⁻⁸ mol L⁻¹ by CV and 5.3 × 10⁻⁸ mol L⁻¹ by DPV and that of UA is 8.4 × 10⁻⁸ mol L⁻¹ by CV and 4.2 × 10⁻⁸ mol L⁻¹ by DPV. The DMSA self-assembled electrode can be applied to the simultaneous determination of EP and UA.     

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spec-troscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers(SAMs).A carboxylic acid-terminated thiol,such as thioctic acid(1,2-dithiolane-3-pentanoic acid),was self-assembled on gold electrodes.Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)63-as a probe.The surface pka of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 ±0.1 and 5.8±0.1,respectively.The method is compared with other methods of monolayer pKa measurement.     

表面活性剂对硫醇单层膜修饰金电极电化学行为的影响

利用自组装方法在金电极表面制备成硫醇单层膜, 循环伏安和交流阻抗实验表明硫醇单层膜与表面活性剂十六烷基三甲基溴化胺作用后, 其电化学行为发生变化, 对于带有不同电荷的探针分子, 表现出一定的选择性响应. 即使是带有相同电荷的探针分子, 由于与表面活性剂的作用方式不同, 也使它们通过硫醇单层膜在电极表面产生电化学响应的程度完全不同.     

Sensitive determination of fluphenazine at a dodecanethiol self-assembled monolayer-modified gold electrode, and its electrocatalysis to phenylephrine

Fluphenazine, an important tranquilizer, was found to undergo effective accumulation on dodecanethiol (DDT) self-assembled monolayer modified gold electrode (i.e. DDT/Au) and generated two anodic peaks at about 0.7 and 0.79 V (vs. SCE) in 0.05 M Na₂B₄O₇ (pH = 9.3) buffer solution. Sensitive and quantitative measurement of fluphenazine based on the former anodic peak was established under optimum conditions. The peak current was linear to fluphenazine concentration in the range from 5 × 10⁻⁷ to 5 × 10⁻⁵ M, with a detection limit of 5 × 10⁻⁹ M. This method was successfully applied to the determination of fluphenazine in drug tablets and proved to be reliable compared with UV spectrophotometry. In the presence of fluphenazine, the electrochemical oxidation of phenylephrine was catalyzed. The DDT self-assembled monolayer was characterized by Fourier transform infrared spectroscopy, surface Raman spectroscopy, X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy, and electrochemical probing.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Detection of metal ions using ion-channel sensor based on self-assembled monolayer of thioctic acid

Gold electrodes were chemically modified with thioctic acid monolayer designed to mimic biological ion-channel membranes. The technique was then used in the determination of alkali, alkaline earth, thallium(I), and lanthanum metal cations as analytes. Cyclic voltammograms (CV) of [Fe(CN)6]³⁻ an electroactive marker, were measured in the presence of the various types of analyte cations. In the absence of the analyte cation, electrostatic repulsion between the marker anions and the carboxylate groups of the receptor monolayer hindered the approach of the marker anion to the electrode surface and hence hindered its reduction. The modified electrodes responded well to the metal cations except the alkali metal cations. The sensors could detect the trivalent cation La³⁺ at concentrations as low as 10⁻⁸ M. The response of the sensor to the metal cations increase in the order alkali metal3+ can be discriminated in the ratio 1:100. This makes it possible to determine the trivalent ion in a sample matrix containing monovalent and divalent cations. Thallium(I) ion showed marked deviation in its response as compared to monovalent ions of the alkali metals. The ion-channel sensor based on self-assembled monolayer of thioctic acid therefore offers a potential alternative technique for the selective determination of metal ions.     

Electrochemical behavior of dopamine at a 3,3′-dithiodipropionic acid self-assembled monolayers

Monolayers of 3,3′-dithiodipropionic acid (DTDPA) were prepared on a polycrystalline gold electrode through a self-assembly procedure to produce a gold 3,3′-dithiodipropionic acid self-assembled monolayer (AuDTDPA) modified electrode. The characterization of the AuDTDPA electrode was investigated by cyclic voltammetry and ac impedance using the [Fe(CN)₆]^3−/4− redox couple. The electrochemical behavior of DA on the modified electrode AuDTDPA was studied by cyclic and square-wave voltammetries, using phosphate buffer as supporting electrolyte. The oxidation peak current for DA increases linearly with concentration in the range of 0.35 × 10⁻⁵ to 3.4 × 10⁻⁵ mol L⁻¹. The performance of the AuDTDPA modified electrode was evaluated for the electroanalytical determination of dopamine (DA) in a pharmaceutical formulation. The AuDTDPA modified electrode showed a stable behavior and the presence of surface-COOH groups avoided the passivation of the electrode surface during the dopamine oxidation.