对称桥头二取代金刚烷衍生物的合成

以易得的1-金刚烷甲酸为原料, 合成了一系列对称桥头二取代金刚烷衍生物. 由1-金刚烷甲酸经Koch-Haaf羰基化反应得到1,3-金刚烷二甲酸(1); 化合物1经还原得到1,3-金刚烷二甲醇(2); 化合物2在HBr-ZnBr₂体系中经溴代反应得1,3-二(溴甲基)金刚烷(3); 同时经Apple-Lee反应将化合物2转化得到1,3-二(氯甲基)金刚烷(4). 采用红外光谱和核磁共振氢谱等手段表征了产物的结构, 提出了可能的反应机理, 并对合成条件进行了优化.     

2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-3-羰基丁酰氯的制备及其与芳烃的酰化反应

制备了较稳定的2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-3-羰基丁酰氯,并实现了其与芳烃的酰化反应,为1-芳基-2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-1,3-丁二酮的合成提供了一条新途径.     

4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔的合成机理和电子结构的理论研究

采用密度泛函理论中的广义梯度近似(DFT/GGA)方法, 在PW91/DNP 水平上研究了4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔在PdCl₂(PPh₃)₂ 催化下的合成机理. 优化了反应过程中的反应物、中间体、过渡态和产物, 通过能量分析结果证实了中间体和过渡态的真实. 在同样的方法和精度研究了4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔在没有催化剂下的合成机理. 通过计算结果得到此反应在有PdCl₂(PPh₃)₂ 催化情况下的活化能小于没有催化剂情况下的活化能, 从而证明了PdCl₂(PPh₃)₂ 催化剂的催化活性. 采用密度泛函理论与周期性平板模型相结合的方法, 研究了产物P 在TiO₂(100)表面的吸附, 通过Mulliken charge 和前线轨道分析表明: 当P 吸附在TiO₂(100)表面时, P 向TiO₂(100)表面转移0.692 e 电荷, 前线轨道能隙变窄. 理论预测的结果与实验值吻合.     

硅烷基取代苯并二硫杂环戊烯的合成及电化学性质

以苯并-1,3-二硫杂环戊烯为原料,通过金属化反应以及锂化二硫杂环戊烯与氯代硅烷反应合成了系列2-硅烷基取代苯并-1,3-二硫杂环戊烯化合物.测定了化合物的氧化电位,发现硅的引入导致苯并-1,3-二硫杂环戊烯的氧化电位明显降低,给体的给电子能力增强.     

2-肟基丙二腈与羟胺反应合成1,3-二氨基-1,2,3-三肟基丙烷反应动力学研究

2-肟基丙二腈与羟胺反应合成1,3-二氨基-1,2,3-三肟基丙烷是合成呋咱衍生物的关键步骤. 利用紫外光谱法对该反应的动力学进行了研究. 实验结果表明反应为二级反应, 分反应级数各为一级. 10 ℃时, 该反应速率常数为0.0679 L•mol^－1•min^－1|提高2-肟基丙二腈、羟胺的浓度和反应温度, 可以加快反应速率.     

无气味的二硫缩烯酮作为1,3-丙二硫醇替代试剂的缩硫醛/酮化反应

探讨了将3-[1,3]二噻-2-亚基-2,4-戊二酮及其衍生物作为一种无气味、易于制备、便于贮存、使用方便的1,3-丙二硫醇替代试剂在缩硫醛/酮化反应中的应用.     

柄型金属有机化合物(Ⅰ)──硅桥联二(1-茚基)和四氢茚基钛化合物的合成及结构

通过1,3-二(1-茚基)四甲基二硅氧烷的双锂盐与TiCl₄·2THF反应制得硅桥联二(1-茚基)钛化合物(Me₂SiOSiMe₂)[Ind]₂TiCl₂(1),对其催化氢化得到相应的四氢茚基化合物(Me₂SiOSiMe₂)[IndH₄]₂TiCl₂(2).对化合物1和2的单晶进行了X射线衍射结构分析,它们的晶体都属单斜晶系,P2₁/n空间群.     

C60富勒烯-哌啶硫代荒酸酯稠合体的合成与三线态特征

C₆₀富勒烯与2-(哌啶-硫代荒酸酯)-1,3-丁二烯通过Diels-Alder环加成反应得到C₆₀富勒烯-哌啶硫代荒酸酯稠合体,运用现代波谱技术等确定了产物结构;用半经验方法PM3和AM1计算预测环加成反应性和C₆₀富勒烯-哌啶硫代荒酸酯稠合体的性能.激光光解时间分辨技术初步探究了单加成的C₆₀富勒烯-哌啶硫代荒酸酯稠合体(C₆₀-PX)三线态特征以及与四-(2-噻吩基)-四硫富瓦烯(TT-TTF)分子间的光诱导电子转移反应.     

3,4-二苯基-4-氧(硫)代-1,3,4-二氮磷杂环戊-2-硫酮的合成、结构及其反应机理研究

本文研究了苯基硫脲、苯基二氯化膦与脂肪醛(酮)在无水苯中进行的类Mannich反应,在分离产物时发现,除了生成3,4-二苯基-4-氧代-1,3,4-二氮磷杂环戊-2-硫酮(Ⅰ)外,还得到了少量3,4-二苯基-4硫代-1,3,4-二氮磷杂环戊-2-硫酮(Ⅱ).根据化合物Ⅱ的生成及³¹PNMR跟踪反应的结果,得出反应机理为P-H键对亚胺衍生物的加成.通过X射线衍射分析发现,化合物Ⅰ和Ⅱ的五元杂环均为平面结构,其平面性受4位氧代或硫代的影响较大.     

1-三氯锡烷基-2,3-丁二烯和2-三氯锡烷基-1,3-丁二烯与甲醛反应的B3LYP研究

用密度泛函方法在B3LYP/6-31G^**水平上研究了1-三氯锡烷基-2,3-丁二烯和2-三氯锡烷基-1,3-丁二烯与甲醛的反应.优化得到各驻点的几何构型,通过振动分析和内禀反应坐标对过渡态进行了确认,解析了反应路径.并用SCRF(PCM)方法在同一水平上对在CH₂Cl₂溶液中的两反应进行了研究.计算了两反应在气相和CH₂Cl₂溶液中的活化能垒、自由能和平衡常数.结果表明,反应具有很强的选择性,主要得到1-三氯锡烷基-2,3-丁二烯与甲醛反应的产物.该结果与实验事实一致.     

Synthesis of bimetallic[Sn,A]-μ-oxoisopropoxyacetate and -μ-oxoisopropoxide and their acetylacetone and benzoylacetone derivatives

Bimetallic [Sn^IV,Al^III-μ-oxoisopropoxyacetate (Bu₂Sn(OAc)OAl(OⁱPr)₂] and bimetallic [Sn^IV,Al^III]-μ- oxoisopropoxide [Bu₂SnO₂Al₂(OⁱPr)₄] have been synthesized by thermal condensation of dibutyltin diacetate with aluminium isopropoxide in 1:1 and 1:2 molar ratio, respectively. Reactions of these compounds with acetylacetone and benzoylacetone in these molar ratios yielded compounds of the type [Bu₂Sn(OAc)OAl(OⁱPr)L], [Bu₂Sn(OAc)OAlL₂], [Bu₂SnO₂Al₂(OⁱPr)₃L] and [Bu₂SnO ₂Al₂(OⁱPr)₂L₂] (where L = acetylacetonate or benzoylacetonate anion). The μ-oxo compounds and their derivatives have been characterized by elemental analysis and spectroscopic techniques (IR, ¹H NMR, ¹³C NMR, ²⁷Al NMR and ¹¹⁹Sn NMR).     

The effect of ligands, solvent and temperature on the reactions of allyltin(IV) compounds with singlet oxygen

The reaction of singlet oxygen with a variety of allyltin compounds CH₂=CHCH₂SnR₃ (R₃ = Me₃, Bu₃, allyl₃, (cyclo-C₆H₁₁₃, Ph₃, allylBu₂, Bu₂Cl, Bu₂OAc, allylCl₂, allylCl₂bipy) has been investigated, and the allylperoxytin compounds, 3-stannylallyl hydroperoxides, and 4-stannyl-1,2-dioxolanes which result from M-ene, H-ene and cycloaddition processes, respectively, have been identified by NMR spectroscopy. As the tin centre becomes more electropositive, as indicated by the ¹³C NMR shift of the allylic CH₂ group, the proportion of the M-ene reaction increases, and when δCH₂ is above about 23.7, the allylperoxytin compound is the only product. An exception to this rule is tetraallyltin, δCH₂ 16.13, which similarly shows only the M-ene reaction. This is tentatively ascribed to the special effect of hyperconjugation between the C---Sn σ-bond and the remaining π-systems.

A polar solvent favours the M-ene reaction. The cycloaddition reaction is favoured by low temperature, and at − 70°C in a non-polar solvent it may become the major route.

Diallylmercury and allylmercury chloride react with singlet oxygen to show only the M-ene reaction, but also undergo extensive photosensitized decomposition. With 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD), allylmercury chloride shows only the M-ene reaction.     

以苯荒酸为配体的[Bu4N]2[W2Ag3S8(C6H5CSS)]钨银硫簇合物的合成和晶体结构

标题化合物由(C₆H₅CSS)^-(Bu₄N)⁺、AgNO₃和(NH₄)₂WS₄、Bu₄NBr反应制备,用X射线单晶衍射法测定其晶体结构。     

Studies on the Polarographic Catalytic Wave of Cinnamic Acid-Bu4NBr-H2O2 System

A new-type of polarographic catalytic wave of organic compound,the polarographic catalytic wave of cinnamic acid (CA) in the presence of tetra-butylammonium bromide (Bu₄NBr) and H₂O₂, is reported based on the combination of the reduction current of adsorbed CA induced by Bu₄NBr with the catalytic current of CA caused by H₂O₂. The dual enhancement of both Bu₄NBr and the oxidizing agent H₂O₂ on the polarographic current of CA produces excellent sensitivity.     

Synthesis and Characterization of Tri(organotin)Substituted Heteropolytungstates

ＳｙｎｔｈｅｓｉｓａｎｄＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆＴｒｉ（ｏｒｇａｎｏｔｉｎ）ＳｕｂｓｔｉｔｕｔｅｄＨｅｔｅｒｏｐｏｌｙｔｕｎｇｓｔａｔｅｓＹＡＮＧＱｉ－ｈｕａ,ＤＡＩＨｕｉ－ｃｏｎｇ,ＬＩＵＪｉｎｇ－ｆｕ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍ...     

Ir2S3/ZnIn2S4催化下可见光诱导发生的烯烃/炔烃的高效硫氢化反应:Ir2S3的作用

C–S键的构建在化学中具有非常重要的意义.利用硫醇和烯烃/炔烃的硫氢化反应来构建C?S键是一种绿色、可持续和低成本的方法.本文以ZnCl2,InCl3,硫代乙酰胺为前驱体,在微量IrCl3存在条件下,通过一步溶剂热法制备得到了含有不同Ir摩尔比(0.5 mol％,1 mol％和2 mol％)的Ir2S3/ZnIn2S4...     

Syntheses, crystal structure and spectroscopic characterization of new platinum(II) dithiocarbimato complexes

The reaction of 4-iodobenzenesulfonamide or 4-fluorobenzenesulfonamide with CS₂ and KOH in dimethylformamide yielded the potassium N-R-sulfonyldithiocarbimates, K₂(RSO₂NCS₂) [R = 4-IC₆H₄ (1) and 4-FC₆H₄ (2)]. These salts reacted with K₂[PtCl₄] in water/methanol to yield complex anions bis(N-R-sulfonyldithiocarbimato)platinate(II), which were isolated as their tetrabutylammonium salts, (Bu₄N)₂[Pt(RSO₂NCS₂)₂] [R = 4-IC₆H₄ (3) and 4-FC₆H₄ (4)]. The structures of 2–4 were determined by X-ray crystallography. The Pt²⁺ in both complexes 3 and 4 lies at the inversion centre and the PtS₄ moiety has a distorted square-planar configuration. The compounds were also characterized by IR, ¹H NMR and ¹³C NMR spectroscopies, and elemental analyses. The molar conductance data are consistent with the fact that 3 and 4 are dianionic complexes.     

Convenient method for the preparation of catecholborane and promotion of the formation of alkenyl catecholborane using BH3 complexes

Catecholborane is prepared in benzene by passing B₂H₆, generated from I₂/NaBH₄, through a suspension of catechol at 25°C. The reagent prepared in this way is used for hydroboration-oxidation of representative alkenes and alkynes at 80°C. Hydroboration of 1-alkynes followed by iodination with I₂/NaOH gives the corresponding trans-1-alkenyl iodides in 70–72% yield. The alkenyl catecholboranes can be prepared at 25°C by performing the reaction in the presence of 10 mole% of H₃B:N(C₂H₅)₂Ph or H₃B:THF. The reaction is believed to go through hydroboration of the alkynes by borane followed by exchange with catecholborane. Studies of the preparation of dialkylphenoxyboranes and alkenyldiphenoxyboranes through hydroboration of 1-decene and 1-decyne by use of H₃B:N(C₂H₅)₂Ph and phenol are also reported.     

Reactions of 2-phenylpyrrole with bromobenzoylacetylene on metal oxides active surfaces

The solvent-free interaction of 2-phenylpyrrole with bromobenzoylacetylene (room temperature) upon their grinding with solid metal oxides (MgO, CaO, ZnO, BaO, Al₂O₃, TiO₂, ZrO₂) and salts (CaCO₃, ZrSiO₄) leads to either the cross-coupling product or the adduct of pyrrole addition to the riple bond of acetylene. The ethynylation is accompanied by the formation of intermediate and side products: E-2-(1-bromo-2-benzoylethenyl)-5-phenylpyrrole and 1,1-di(5-phenylpyrrol-2-yl)-2-benzoylethene. The activity of the metal oxides in the ethynylation reaction falls in the order (in the brackets, the content of 2-benzoylethynyl-5-phenylpyrrole in the reaction mixture is given): ZnO (81%), BaO (73%), Al₂O₃ (71%), MgO (69%), CaO (50%). The oxides, SiO₂, TiO₂, ZrO₂, and the salts, CaCO₃ and ZrSiO₄, are inactive in the ethynylation reaction affording only the intermediate adduct, with ZrO₂ the isolated yield of the bromoethenylpyrrole reaching 60%. ESR monitoring shows the reaction to start from one electron transfer from pyrrole to acetylene mediated by the oxide surface. The adduct is readily converted on Al₂O₃ to 2-(benzoylethynyl)-5-phenylpyrrole crystallized mostly as cis-rotamer (X-ray data).     

Tetrabutylammonium phosphomolybdate on fluorapatite: an efficient solid catalyst for solvent-free selective oxidation of sulfides

A new synthetic method of sulfoxides and sulfones using solvent-free oxidations of sulfides with urea–hydrogen peroxide complex (urea–H₂O₂) and tetrabutylammonium phosphomolybdate catalyst on fluorapatite ((Bu₄N)₃[PMo₁₂O₄₀]/FAp). In the solid-phase system the oxidations of aromatic and alkyl sulfides proceeded at 4–25 °C and the corresponding sulfoxides or sulfones were selectively obtained in good yields by controlling the amount of urea–H₂O₂.