Interactions of apo cytochrome C with alternating copolymers of maleic acid and alkene

Apo cytochrome c (apo cyt c) tends to aggregate at alkali pH. Poly(isobutylene-alt-maleic acid) (PIMA) is soluble molecularly, whereas poly(1-tetradecene-alt-maleic acid) (PTMA) forms particles that tend to dissociate by increasing pH and decreasing concentration. Dynamic light scattering and surface plasmon resonance are used to investigate the interactions of PIMA and PTMA with apo cyt c at different pH values to understand the mechanism of the interactions. When the positive or negative charges are in excess, the copolymer-protein complex particles can be stabilized by the charges on the surface. When the ratio of the positive to negative charges is close to the stoichiometric value, precipitation occurs. At pH 11.8, both PTMA and apo cyt c carry negative charges, but the hydrophobic interaction makes them form complexes. A competition exists between the interaction of the copolymer with apo cyt c and the self-aggregation of PTMA or apo cyt c alone. The interaction of PIMA or PTMA with apo cyt c at neutral and alkali pH destroys the aggregation of PTMA or apo cyt c and forms new complex particles.     

Morphological studies and ionic transport properties of partially sulfonated diblock copolymers

The morphological behavior of partially sulfonated polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) membranes cast from tetrahydrofuran (THF) solutions were investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM).The uptakes of methanol and water increase as the sulfonation degree increases, the methanol uptake being overwhelmingly greater than the water uptake. The conductivity increases almost exponentially with increasing sulfonation degree of polystyrene units. Clusters of sulfonated units that are formed in the solution used for casting membranes persist in the solid state after evaporation. In contact with water, swelling of the membranes proceeds predominantly in these clusters. The original lamellar morphology of the diblock copolymer is progressively deformed with increasing degree of sulfonation by the presence of the clusters containing ion-rich sequences of sulfonated polystyrene blocks.     

Uniform chitosan hollow microspheres prepared with the sulfonated polystyrene particles templates

Biodegradable chitosan hollow microspheres have been fabricated by employing uniform sulfonated polystyrene (PS) particles as templates. The chitosan was adsorbed onto the surface of the sulfonated polystyrene templates through the electrostatic interaction between the sulfonic acid groups on the templates and the amino groups on the chitosan. Subsequently, the adsorbed chitosan was crosslinked by adding glutaraldehyde. After the removal of the sulfonated polystyrene core, chitosan hollow microspheres were obtained. The longer the sulfonation time used, the smaller the size of the hollow particles and the thicker the chitosan wall obtained. Fourier transform infrared spectrometry was used to characterize the component of the microspheres. The morphologies of the PS templates and the chitosan microspheres were observed by transmission electron microscopy and scanning electron microscopy. The controlled release behavior of the chitosan hollow microspheres was also primarily investigated.     

壳层可控导电聚吡咯/聚苯乙烯复合微球及聚吡咯中空微胶囊的制备

在导电聚合物含量较小时,含核壳结构的导电聚合物复合粒子就可以具有和本体相当的导电率,且加工性好,近年来这种核壳结构微粒的制备已引起了科学家们的广泛关注．Armes等[制备了导电聚吡咯、导电聚苯胺包覆聚苯乙烯的核壳结构胶体粒子及聚苯胺和二氧化硅的纳米复合物．刘正平等用改进的方法在粒径为116nm的单分散聚苯乙烯乳胶粒子上包覆聚吡咯,     

Wetting behavior of lightly sulfonated polystyrene ionomers on silica surfaces

The wetting/dewetting behavior of thin films of lightly sulfonated low molecular weight polystyrene (SPS) ionomers spin-coated onto silica surfaces were studied using atomic force microscopy (AFM), contact angle measurements, and electron microscopy. The effects of the sulfonation level, the choice of the cation, the solvent used to spin-coat the films, and the molecular weight of the ionomer were investigated. Small angle X-ray scattering was used to determine the bulk microstructure of the films. The addition of the sulfonate groups suppressed the dewetting behavior of the PS above its glass transition temperature, e.g. no dewetting occurred even after 240 h of annealing at 120 degrees C. Increasing the sulfonation level led to more homogeneous and smoother surfaces. The choice of the cation used affected the wetting properties, but not in a predictable manner. When tetrahydrofuran (THF) or a THF/methanol mixed solvent was used for spin-casting, a submicron-textured surface morphology was produced, which may be a consequence of spinodal decomposition of the film surface during casting. Upon annealing for long times, the particles coalesced into a coherent, nonwetted film.     

Preparation of raspberry-like silica microcapsules via sulfonated polystyrene template and aniline medium assembly method

Raspberry-like composite particles and microcapsules were prepared with anionic sulfonated polystyrene (PSS) particles as templates and cationic aniline monomer as assembly medium. With the help of the sulfonated microgel shells, aniline and silica particles could not only adsorbed onto template surfaces but also go inward shells and finally form microcapsules with varied silica shell thickness. The sulfonation extent of PSS particles first climbed up and then decreased with sulfonation time due to the competition of sulfonation reaction and PSS chain detachment. The silica content in composite particles and shell thickness of microcapsules followed similar trend with sulfonation extent. The choice of aniline as assembly medium was checked by comparing with methyl methacrylate and [2-(methacryloyloxy) ethyl] trimethylammonium chloride, and it was found that the cationic and water-insoluble properties of aniline are both important for the composite efficiency.     

磺化间规聚苯乙烯的表征

间规聚苯乙烯(sPS)是一种新型结晶性工程塑料,熔点达270℃,具有结晶速度快、耐热性好、耐化学腐蚀性优良等特点,可广泛用于汽车、电子、机械等行业,极具开发意义,但是由于sPS脆性大,抗冲击性差,故通过化学改性在sPS的苯环上引入极性基团,用于制成共混合金与复合材料,是提高材料韧性,开拓sPS用途的重要途径。     

Surface modification of thin polystyrene films

 The sulfonation of polystyrene (PS) films with 50 and 96% sulfuric acid as a function of time is presented. In contrast to previous literature reports, we showed that the treatment of PS films even with dilute sulfuric acid yields sulfonated surfaces after reaction times of 30 s–1 h. The hydrophilicity of the modified PS increased considerably in comparison to the unreacted PS films. X-ray photoelectron spectroscopy yielded evidence for the sulfonation of PS at the surface. Unreacted spin-coated PS films were very smooth, while modified PS showed some clumps dispersed on a flat surface, as analyzed by atomic force microscopy. The surface morphology was identified as a phase-separated system composed of domains of unreacted PS and a matrix of sulfonated PS by fluorescence microscopy using the positively charged dye rhodamine B. The adsorption of the polycation diallyldimethylammonium chloride on the sulfonated PS surface could be detected. The thickness of the adsorbed polycation was 2.2 nm. Received: 3 November 1998 Accepted in revised form: 23 February 1999     

Synthesis and Characterization of Sulfonated Polyphosphazene-graft-Polystyrene Copolymersfor Proton Exchange Membranes简

A novel series of polyphosphazene-grafl-polystyrene （PP-g-PS） copolymers were successfully prepared by atom transfer radical polymerization （ATRP） of styrene monomers and brominated poly（bis（4-methylphenoxy）phosphazene） macroinitiator. The graft density and the graft length could be regulated by changing the bromination degree of the macroinitiator and the ATRP reaction time, respectively. The PP-g-PS copolymers readily underwent a regioselective sulfonation reaction, which occurred preferentially at the polystyrene sites, producing the sulfonated PP-g-PS copolymers with a range of ion exchange capacities. The resulting sulfonated PP-g-PS membranes prepared by solution casting showed high water uptake, low water swelling and considerable proton conductivity. They also exhibited good oxidative stability and high resistance to methanol crossover. Morphological studies of the membranes by transmission electron microscopy showed clear nanophase-separated structures resulted from hydrophobic polyphosphazene backbone and hydrophilic polystyrene sulfonic acid segments, indicating the formation of proton transferring tunnels. Therefore, these sulfonated copolymers may be candidate materials for proton exchange membranes in direct methanol fuel cell （DMFC） applications.     

Interpolyelectrolyte complexes: a single-molecule insight

Polyelectrolyte (PE) complexes (PECs) between long polycation poly(methacryloyloxyethyl dimethylbenzylammonium chloride) and short polyanion polystyrene sulfonic acid adsorbed onto mica were studied by atomic force microscopy. If one component is taken in excess, then a rapid coupling of the oppositely charged polyions first leads to the formation of nonequilibrium structures when collapsed PEC particles coexist with unreacted PEs molecules. The equilibrium PEC particles possess micelle-like core-shell morphology if the short polyion is taken in excess. When long PE is given in excess, equilibrium PECs are stabilized by wrapping the long polyion around hydrophobic segments of the PEC. We propose that transformations of initially formed nonequilibrium aggregates proceed through slow reactions (addition or/and substitution) of primary complexes with unreacted PEs chains, which finally leads to equilibrium PECs with optimized morphology. As expected, the mixing of oppositely charged PEs in a near-stoichiometric ratio leads to highly aggregated water-insoluble PECs.     

Fluorescence and light-scattering studies on the formation of stable colloidal nanoparticles made of sodium sulfonated polystyrene ionomers

The lightly sulfonated polystyrene ionomer is only soluble in some organic solvents, such as toluene and tetrahydrofurnan (THF). The mixture of its organic solution with water normally leads to macroscopic phase separation, namely precipitation. In this study, using the steady-state fluorescence, the nonradiative energy transfer and dynamic laser light scattering, we demonstrate that the sulfonated polystyrene ionomers can form stable colloidal nanoparticles if the THF solution of the ionomers is dropwisely added into an excessive amount of water, or vice verse, water is added in a dropwise fashion into the dilute ionomer THF solution under ultrasonification or fast stirring. The hydrophobic core made of the polystyrene backbone chains is stabilized by the ionic groups on the particle surface. Such formed stable nanoparticles have a relatively narrow size distribution with an average diameter in the range of 5–12 nm, depending on the degree of sulfonation, the initial concentration of the ionomer THF solution, and the mixing order. This study shows another way to prepare surfactant-free polystyrene nanoparticles. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1593–1599, 1997     

Structure and mechanism formation of polyelectrolyte complex obtained from PSS/PAH system: effect of molar mixing ratio, base–acid conditions, and ionic strength

Colloidal dispersions of polyelectrolyte complexes were prepared in aqueous solutions. We have used mixtures containing the strongly charged anionic polyelectrolyte sodium polystyrene sulfonate (PSS) and the weak cationic polyelectrolyte polyallylamine hydrochloride (PAH). Both polymers have the same molecular weight. The complexes were obtained by adding drop by drop a solution of the anionic polyelectrolyte to excess cationic polyelectrolyte. In these conditions, sodium polystyrene sulfonate and polyallylamine hydrochloride self-assembled in nanometer-range complexes; the self-assembly is driven by electrostatic interactions, as well as by entropy changes due to counterion release. The electrostatic interactions were controlled in several ways: by changing the C _PSS/C _PAH concentration ratio, by modifying the pH (and thus the protonation degree of polyallylamine hydrochloride), and by adding sodium chloride (screened interactions). Dynamic light scattering experiments demonstrated that the hydrodynamics radius of the polyelectrolyte complex increases, changing from soluble to insoluble complex formation, when some physicochemical parameters are increased: the concentration ratio between polyelectrolytes, the sodium chloride concentration, and pH. Zeta potential measurements, as a function of the C _PSS/C _PAH concentration ratio, as well as of pH and ionic strength, allow us to state that the resulting particles have a structure constituted by a neutral core surrounded by a positively charged shell. The polyelectrolyte complexes have globular shapes, as observed by electron microscopy.     

磺化聚苯乙烯镧离子型聚合物的稀溶液性质

聚电解质行为;比浓粘度;电解质;磺化聚苯乙烯镧离子型聚合物的稀溶液性质     

Electrorheological properties of carbon nanotube/polyelectrolyte self‐assembled polystyrene particles by layer‐by‐layer assembly

Sulfonated polystyrene (PS) particles were prepared by the sulfonation of PS microspheres with H₂SO₄. Then, composite particles were synthesized by layer‐by‐layer (LbL) self‐assembly with funtionalized multiwall carbon nanotubes (fMCNTs) and polyelectrolytes on sulfonated PS particles. The amount of fMCNTs on PS particles was adjusted by controlling the number of fMCNT layers by LbL self‐assembly. Composite particles were characterized by ζ‐potential analysis, scanning electron microscopy, and thermal analysis. The electrorheological (ER) properties of composite particles in insulating oil was investigated with varying the number of fMCNT layers under controlled electric fields. It was observed that the number of fMCNT layers was a critical factor to determine the ER properties of composite particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1058–1065, 2008     

In-situ polymerization at the interfaces of micelles: a "grafting from" method to prepare micelles with mixed coronal chains

Herein we describe a new strategy for producing micelles with mixed coronal chains. This method involves attachment of an atom transfer radical polymerization (ATRP) initiator at the interface of a micelle and preparation of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes at the interface by a "grafting from" method. Poly(ethylene glycol)- block-polystyrene (PEG- b-PS) diblock copolymer was achieved by ATRP. After the sulfonation reaction PS blocks were partly sulfonated. In aqueous solution at low pH the sulfonated block copolymer self-assembled into micelles with PS cores and PEG coronae and sodium 4-styrenesulfonate groups were distributed at the interfaces of the micelles. An ATRP initiator consisting of a quaternary ammonium salt moiety and a 2-bromo-2-methyl propionate moiety was ion exchanged onto the interface of the micelle. ATRP of DMAEMA was initiated at the interface, and micelles with PEG/PDMAEMA mixed coronal chains were prepared by ATRP. The structures of the micelles were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and zeta potential measurements. The size and morphology of the micelles were controlled by pH in aqueous solution. At high pH, PDMAEMA brushes collapse, forming nanodomains on the surface of the micelles. PDMAEMA brushes in the coronae of the micelles could be used as a template for preparation of gold nanoparticles.     

Novel,tadpole-shaped,polyhedral oligomeric silsesquioxane containing sulfonated block copolymer for humidity sensing

Due to the “trade-off” effect between the high water adsorption and low stability under high Relative Humidity of polymer matrix, fabrication of resistive-type polymer-based humidity sensors with a wide impedance response and excellent stability in high relative humidity remains a great challenge. Aim at solving that, a novel polymeric humidity sensing matrix, specifically a tadpole-shaped, polyhedral oligomeric silsesquioxane (POSS) containing block copolymers (BCPs) of POSS-poly(methyl methacrylate)-polystyrene (POSS-PMMA-SPS) were proposed. This novel BCP was synthesized using atom transfer radical polymerization (ATRP) employing a two-step approach, and following post sulfonation, a series of sulfonated BCPs (POSS-PMMA-SPS) with different sulfonation degree was obtained. The subject humidity sensors were produced using different sulfonated BCPs employing a dip-coating technique, and three wide-impedance response humidity sensors were produced. Each of these sensors exhibited an excellent humidity-sensing response of more than 10⁴ within the humidity range from 11% to 95% RH. In particular, the humidity sensor S-6 that had a proper degree of sulfonation presented a relatively fast response (t_90% of 11 s and 80 s in both the water adsorption and desorption processes), and superior repeatability for more than 30 days.     

New Composite Proton-Conducting Membranes Based on Nafion and Cross-Linked Sulfonated Polystyrene

New composite membranes based on commercial perfluorinated Nafion-115 membrane and cross-linked sulfonated polystyrene were synthesized and investigated. The membranes were prepared by radical polymerization of styrene in the presence of a cross-linking agent divinylbenzene in Nafion polymer matrix and subsequent sulfonation of formed polystyrene. The membranes containing approximately 5 and 10 wt % of cross-linked polystyrene with ion-exchange capacity of 1.1 to 1.3 mg-eq/g were obtained. Modification with sulfonated polystyrene leads to an increase in the moisture content and proton conductivity of membranes in the humidity range of 15 to 100 RH.     

Synthesis of sulfonated poly(diphenylacetylene)s with high CO2 permselectivity

High‐molecular‐weight poly[1‐phenyl‐2‐(4‐t‐butylphenyl)acetylene], poly[1‐phenyl‐2‐(4‐trimethylsilylphenyl) acetylene], and their copolymers were synthesized by the polymerization with TaCl₅–n‐Bu₄Sn. The obtained polymers were sulfonated by using acetyl sulfate to give sulfonated poly(diphenylacetylene)s with different degrees of substitution. The degrees of sulfonation of poly[1‐phenyl‐2‐(4‐t‐butylphenyl)acetylene] and copolymers were in the range of 0.57–0.85. When poly[1‐phenyl‐2‐(4‐trimethylsilylphenyl)acetylene] was sulfonated, the sulfonated poly(diphenylacetylene) with the highest degree of sulfonation was obtained among all the polymers in this study. Its degree of sulfonation was 1.55. All the sulfonated polymers exhibited high CO₂ permselectivity, and their CO₂/N₂ separation factor were over 31. The sulfonated poly(diphenylacetylene) with the highest degree of sulfonation showed the highest CO₂/N₂ separation factor of 75. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6463–6471, 2009     

Fourier transform infrared/attenuated total reflectance analysis of water diffusion in poly[styrene‐b‐isobutylene‐ b‐styrene] block copolymer membranes

A Fourier transform infrared/attenuated total reflectance technique was used to study the diffusion of water through poly(styrene‐b‐isobutylene‐b‐styrene) block copolymers (BCPs), as well as sulfonated (H⁺) and Na⁺‐sulfonated ionomer versions. Diffusion data were collected and interpreted for these membranes versus polystyrene block composition, degree of sulfonation, Na⁺ ion content in the ionomers, and the effect of initially dry versus prehydrated conditions. An “early time” diffusion coefficient, D, decreased with increasing percent polystyrene for a series of unmodified BCPs. D decreased with increasing degree of sulfonation, and with increasing ion content for the Na⁺‐exchanged samples and this was interpreted in terms of diffusion limitations caused by a strong tendency for ion hydration. The method also yielded information relating to the time evolution of water structure from the standpoint of degree of intermolecular hydrogen bonding. Membrane prehydration causes profound increases in D for both the unmodified BCP and sulfonated samples, as in plasticization. The simultaneous acquisition of information relating to interactions between water molecules and interactions of water molecules with functional groups on the host polymer matrix offers more information than conventional diffusion measurement techniques that simply count transported molecules. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 764–776, 2005     

Effect of Sulfonation on the Crystallization Behaviour of Syndiotactic Polystyrene

Syndiotactic Polystyrene (sPS) was sulfonated to different levels in a mixture of 1,1,2–trichloroethane and chloroform. Sulfonation levels were determined by nonaqueous titrations using phenolphthalein indicator. Thermal properties of sulfonated sPS (SsPS) ionomers depend on the sulfonation level. Incorporation of sulfonic acid groups in to the syndiotactic polystyrene backbone was found to affect the crystallization behavior of sPS. DSC data indicated that the melting temperature (T_m), heat of fusion, crystallization temperature (T_c), crystallization rate and degree of crystallization were lowered by the incorporation of sulfonic acid group on the syndiotactic polystyrene backbone. Thermal and FTIR data indicated that the sulfonic groups did not enter into the crystal lattice but remained in the amorphous phase.