Modification of capillary electrophoresis capillaries by poly(hydroxyethyl methacrylate), poly(diethylene glycol monomethacrylate) and poly(triethylene glycol monomethacrylate)

Modification of capillary electrophoresis (CE) capillaries by poly(hydroxyethyl methacrylate) (poly(HEMA), poly(diethylene glycol monomethacrylate) (poly(DEGMA) and poly(triethylene glycol monomethacrylate) (poly(TEGMA), was studied. Methods based on physical adsorption of the modifier and on its chemical binding were compared on the basis of the electroosmotic flow (EOF) reproducibility, the EOF dependence on the pH, the symmetry of the peak of positively charged tyramine, the stability of the coating and the separation of standard and milk proteins in the modified capillaries. Reproducible coatings were obtained by chemical binding of the polymers to the capillary walls and by coating with a solution of a polymer, as also demonstrated by the atomic force microscopy.     

Macrophage uptake of core-shell nanoparticles surface modified with poly(ethylene glycol)

The in vitro uptake of core-shell nanoparticles encapsulated in a bio-macromolecular nanoshell assembled from multilayered polyelectrolytes was studied. Sulfate modified fluorescent polystyrene nanobeads (diameter 200 nm) were used as a solid core upon which charged multilayers of poly-l-lysine, chitosan, and heparin sulfate are electrostatically deposited utilizing a layer-by-layer (LbL) self-assembly process. The nanoshell composed of the multilayered polyelectrolytes was modified with poly(ethylene glycol) (PEG) of varying molecular weights (either MW 2000, 5000, or 20 000 Da) to form a hydrophilic and long-circulating nanoparticle. The assembly of the nanoshell was confirmed by zeta potential, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The reversal in charge upon the deposition of alternating polyelectrolytes was observed by zeta potential measurements. The nanometer thickness of the nanoshell was confirmed by TEM. The presence of the (C-C-O)(n)() backbone in PEG at the surface of the nanoshell was confirmed by the increase in (C-O,N) peak area concentrations compared to (C-C) peak area, and these results were gathered from XPS. In vitro studies between suspension macrophages and core-shell nanoparticles were performed to determine how the hydrophilicity and the charge on the nanoshell can promote or reduce uptake. Results showed that after 24 h uptake was decreased 3-fold when PEGs of 2000 and 20 000 Da were chemisorbed to the nanoshell, as opposed to a nanoshell with either a positive or highly negative charge. Confocal microscopy aided in verifying that core-shell nanoparticles were internalized within the cell cytoplasm and were not attached to the cell surface. Protein adhesion studies with bovine serum albumin were performed to determine the relationship between surface charge and opsonization of core-shell nanoparticles. It was found that a hydrophilic surface with a low negative charge reduced protein adsorption and uptake. The in vitro uptake of macrophages and protein adsorption onto core-shell nanoparticles formed using layer-by-layer assembly has not been previously studied.     

Preparation of poly(hydroxyethyl methacrylate) and poly(hydroxypropyl methacrylate) latices

Hydroxyethyl methacrylate and hydroxypropyl methacrylate (both having extremely high solubilities in water) were polymerized in aqueous medium to obtain the respective polymer latices with a solid content as high as 10 wt.-%. The initial state of the polymerization is in solution rather than in dispersion, and the polymer product is sparingly soluble in the aqueous phase. The polymerization was carefully controlled to avoid forming hydrogel by using an oil soluble initiator and a mixture of sodium dodecyl sulfate and poly(vinyl alcohol). Solubilities of both monomers and polymers in water were also investigated.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Terpolymerization of methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate or poly(ethylene glycol) ethyl ether methacrylate with methacrylic acid and sodium styrene sulfonate: determination of the reactivity ratios

Materials bearing ionic monomers were obtained through free radical terpolymerization of methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PMEM) or poly(ethylene glycol) ethyl ether methacrylate (PEEM) with methacrylic acid (MA) and sodium styrene sulfonate (NaSS). The reactions were carried out in dimethyl sulfoxide using azobis(isobutyronitrile) as initiator. The reactivity ratios of the different couple of monomers were calculated according to the general copolymerization equation using the Finnemann-Ross, Kelen-Tüdos and Tidwell-Mortimer methods. The values of the reactivity ratios indicate that the different monomer units can be considered as randomly distributed along the chains for terpolymerizations of MMA, PMEM or PEEM with MA and NaSS. The average composition of the comonomers in the different terpolymers were calculated, showing a good agreement between the experimental and theoretical compositions. The instantaneous compositions are constant until about 70% of conversion. For higher conversions, the insertion of ionic monomers increases or decreases according to the system studied.     

Thermoresponsive copolymers of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate

Copolymers of methacrylic acid (MAA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) were prepared and their cloud points in aqueous solution were studied as a function of comonomer ratio, solution pH, and presence of hydrophobic comonomers. Under acidic conditions, the cloud point falls below 0 °C for copolymers with between 25% to 60% ether content, because of the formation of hydrophobic H‐bonded ether–acid complexes. The cloud point also decreases with solution pH. For equivalent ether to acid ratios, the cloud point decreases with decreasing PEG chain length, because of the presence of a larger number of hydrophobic methyl and methacrylate groups. Similarly, the cloud point decreases upon incorporation of hydrophobic comonomers such as butyl, lauryl, or glycidyl methacrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6095–6104, 2005     

Zeta potentials of PDMS surfaces modified with poly(ethylene glycol) by physisorption

Controlling zeta potential of PDMS surface coated with a layer of PEG is important for electroosmosis and electrophoresis in PDMS made microfluidic chips. Here, zeta potentials of PDMS surfaces modified by simple physisorption of PEG of different concentrations in phosphate buffer solutions, pure water, and PEG solution were reported. Coating PEG on PDMS surfaces was achieved by immersing a PDMS layer into the PEG solution for 10 min and then taking it out and placing it in an oven at 80℃ for 10 h. To avoid damaging the PEG layer on the PDMS surface, an induction current method was employed for zeta potential measurement. Zeta potentials of PEG modified PDMS in electrolyte solutions were measured. The results show that 2.5% PEG can effectively modify PDMS surface with positive zeta potential value in phosphate buffer solutions, pure water and 10% PEG solution. Further increase in PEG solution beyond 5% for surface modification has no obvious effect on zeta potential change.     

Imparting antifouling properties of poly(2-hydroxyethyl methacrylate) hydrogels by grafting poly(oligoethylene glycol methyl ether acrylate)

The antifouling properties of poly(2-hydroxyethyl methacrylate- co-methyl methacrylate) hydrogels were improved by the surface grafting of a brush of poly(oligoethylene glycol methyl ether acrylate) [poly(OEGA)]. The atom-transfer radical polymerization (ATRP) of OEGA (degree of polymerization = 8) was initiated from the preactivated surface of the hydrogel under mild conditions, thus in water at 25 degrees C. The catalytic system was optimized on the basis of two ligands [1,1,4,7,10,10-hexamethyl-triethylenetetramine (HMTETA) or tris[2-(dimethylamino)ethyl]amine (Me6TREN)] and two copper salts (CuIBr or CuICl). Faster polymerization was observed for the Me 6TREN/CuIBr combination. The chemical composition and morphology of the coated surface were analyzed by X-ray photoelectron spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy, contact angle measurements by the water droplet and captive bubble methods, scanning electron microscopy, and environmental scanning electron microscopy. The hydrophilicity of the surface increased with the molar mass of the grafted poly(OEGA) chains, and the surface modifications were reported in parallel. The antifouling properties of the coatings were tested by in vitro protein adsorption and cell adhesion tests, with green fluorescent protein, beta-lactamase, and lens epithelial cells, as model proteins and model cells, respectively. The grafted poly(OEGA) brush decreased the nonspecific protein adsorption and imparted high cell repellency to the hydrogel surface.     

Thermoresponsive oligo(ethylene glycol) methacrylate colloids with antifouling surface properties

Thermoresponsive polymeric colloids attract great attention in several biotechnological applications owing to their ability to manipulate drug release characteristics in a controlled manner. Majority of these applications utilized N‐isopropylacrylamide (NIPAM)‐based particles for controlled drug release. Despite its advantages, such as easy chemical modification and well‐documented literature, a potentially important bottleneck for NIPAM in biological applications is its tendency for nonspecific protein adsorption. Herein, we report a simple way to prepare novel thermoresponsive colloids composed of oligo(ethylene glycol) side chains via precipitation polymerization technique. In addition to displaying highly reversible thermal response, these particles also have considerably low nonspecific protein adsorption when compared with NIPAM counterparts. These crosslinked poly(ethylene glycol) ethyl ether methacrylate particles were characterized using dynamic light scattering and transmission electron microscopy. The effects of co‐monomer, crosslinker and initiator on particle characteristics were investigated. Finally, particle toxicity studies were carried out using 3T3 fibroblast cell lines in MTT cytotoxicity assay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(ethylene glycol)-functionalized hydroxyapatite organic colloid intended for nanocomposites

Traditional modifications to hydroxyapatite(HA) nanoparticles usually occurred after HA synthesis and thus are insufficient to avoid particle agglomeration.In this study,a new heterofunctional poly(ethylene glycol)(PEG) with phosphoric acid and carboxyl end groups,i.e.,α-(N-2-phosphoethyl phosphoric acid)-amide,ω-carboxyl-bismethyoxy poly(ethylene glycol)(ADP-PEG-COOH),was synthesized as an in situ surface modifier to HA nanoparticles.The resulting modified HA(ADP-PEG-HA) can disperse in methanol,forming a colloid stabilized by peripheral carboxyl-endcapped PEG chains.The colloidal particles resembled nanospheres which agglomerated to some extent under examination by transmission electron microscope.This highly dispersible HA nanoparticles in organic solvent might find application in preparing new HA nanocomposites.     

Soluble-polymer-supported synthesis of beta-lactams on a modified poly(ethylene glycol)

A modified poly(ethylene glycol) (PEG) has been developed for the soluble-polymer-supported synthesis of beta-lactams. The monomethylether of PEG (MeOPEG) with an average M(W) of 5000 was used as the support, a 4-(3-propyl)phenyl residue as the spacer, and a 4-oxyphenylamino group as the moiety with the reactive functionality. From this modified PEG representative aromatic, heteroaromatic, unsaturated, and aliphatic imines were obtained in high yields by different procedures. The polymer-supported imines were then employed to prepare several beta-lactams by enolate/imine condensation and ketene/imine cycloaddition. Examples of the control of the absolute stereochemistry during the azetidinone ring formation are also reported. The reactions carried out on the polymer-bound imines showed a remarkable similarity to those performed on nonimmobilized imines, both in terms of yields and stereoselectivities. Removal of the beta-lactams from the polymer has also been accomplished to directly deliver the N-unsubstituted azetidinones.     

Nanosphere formation in copolymerization of methyl methacrylate with poly(ethylene glycol) macromonomers

Polymeric nanospheres consisting of poly(methyl methacrylate) (PMMA) cores and poly(ethylene glycol) (PEG) branches on their surfaces were prepared by free radical copolymerization of methyl methacrylate (MMA) with PEG macromonomers in ethanol/water mixed solvents. PEG macromonomers having a methacryloyl (MMA‐PEG) and p‐vinylbenzyl (St‐PEG) end group were used. It has become clear that the obtained polymer dispersions form three kinds of states, particle dispersion (milky solution), clear solution, and gel/precipitation. It was found that the reaction parameters such as MMA concentration, molecular weight, and concentration of PEG macromonomers, and water content can affect nanosphere formation in a copolymerization system. The water volume fraction of mixed ethanol/water solvents affected the particle size of the nanospheres. These differences in the formation of nanospheres were due to the solvophilic/solvophobic balance between the copolymers and solvents during the self‐assembling process of the copolymers. The sizes of nanospheres can be controlled by varying concentration of PEG macromonomer and water content in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1811–1817, 2000     

Studies on copolymerization of N-isopropylacrylamide with poly(ethylene glycol) methacrylate

The paper describes the preparation and characterization of cross-linked homopolymers and copolymers of N-isopropyl acrylamide (NIPAAm) with poly(ethylene glycol) methacrylate (PEGMA, M_n = 526 g/mol). Several copolymer samples were prepared by taking varying amounts of monomers i.e. NIPAAm and PEGMA in the initial feed using hydrophilic (IRGACURE-2959) and hydrophobic (DURACURE-1173) photoinitiator. In order to investigate the effect of reaction conditions, copolymers were prepared below or above the lower critical solution temperature (LCST) using water or water:ethanol (50:50) as solvent and by varying the amounts of cross-linker. Hydrogels prepared under varying reaction conditions were characterized for its swelling behaviour (using optical microscope), phase transition temperature (using DSC) and morphology (using SEM). As expected LCST increased from 35 to 39 °C as PEGMA content in copolymers increased from 1 to 20% (w/w). However, the morphology of hydrogels was found to be independent on the reaction conditions.Copolymer films having an optimum combination of swelling and performance properties were evaluated as switchable cell culture membranes. Hepatic cancer cell lines (Hep G-2) was used to study the cell growth and detachment. Cell growth and detachment were found to be dependent on the copolymer composition. Cell viability was found comparable to trypsin which also supports application of these films as cell culture membrane.     

Plasma-mediated grafting of poly(ethylene glycol) on polyamide and polyester surfaces and evaluation of antifouling ability of modified substrates

A simple cold plasma technique was developed to functionalize the surfaces of polyamide (PA) and polyester (PET) for the grafting of polyethylene glycol (PEG) with the aim of reducing biofilm formation. The surfaces of PA and PET were treated with silicon tetrachloride (SiCl4) plasma, and PEG was grafted onto plasma-functionalized substrates (PA-PEG, PET-PEG). Different molecular weights of PEG and grafting times were tested to obtain optimal surface coverage by PEG as monitored by electron spectroscopy for chemical analysis (ESCA). The presence of a predominant C-O peak on the PEG-modified substrates indicated that the grafting was successful. Data from hydroxyl group derivatization and water contact angle measurement also indicated the presence of PEG after grafting. The PEG-grafted PA and PET under optimal conditions had similar chemical composition and hydrophilicity; however, different morphology changes were observed after grafting. Both PA-PEG and PET-PEG surfaces developed under optimal plasma conditions showed about 96% reduction in biofilm formation by Listeria monocytogenes compared with that of the corresponding unmodified substrates. This plasma functionalization method provided an efficient way to graft PEG onto PA and PET surfaces. Because of the high reactivity of Si-Cl species, this method could potentially be applied to other polymeric materials.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

High capacity binding of antibodies by poly(hydroxyethyl methacrylate) nanoparticles

Poly(hydroxyethyl methacrylate) (PHEMA) nanoparticles with an average size of 150 nm in diameter and with a poly-dispersity index of 1.171 were produced by a surfactant free emulsion polymerization. Specific surface area of the PHEMA nanoparticles was found to be 1779 m(2)/g. Reactive imidazole containing 3-(2-imidazoline-1-yl)propyl(triethoxysilane) (IMEO) was used as a pseudo-specific ligand. IMEO was attached covalently onto the nanoparticles. PHEMA-IMEO nanoparticles were used for the affinity binding of immunoglobulin-G (IgG) from human plasma. To evaluate the degree of IMEO loading, the PHEMA nanoparticles were subjected to Si analysis by using flame atomizer atomic absorption spectrometer and it was estimated as 64.5 mg/g of polymer. The nanoparticles were characterized by transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). IgG binding onto the PHEMA nanoparticles was found to be 5.2 mg/g. Much higher binding values (up to 843 mg/g) were obtained for the PHEMA-IMEO nanoparticles. IgG could be repeatedly bound and eluted on PHEMA-IMEO nanoparticles without noticeable loss in the IgG binding capacity.     

Colloidal dispersions of monodisperse magnetite nanoparticles modified with poly(ethylene glycol)

Monodisperse magnetite nanoparticles modified with poly(ethylene glycol) (PEG) were synthesized using a silane functionalized PEG obtained by reacting 3-aminopropyl triethoxysilane with carboxylic acid-methoxy PEG (mPEG-COOH) using amide reactions. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta potential measurements show the particles are monodisperse (sigma(gv) approximately 0.2) and stable in water for pH of 3-9 and ionic strengths, up to 0.3 M NaCl. Thermogravimetric analysis coupled with TEM and DLS indicates formation of a dense graft layer on the particle surface. An analysis of the interparticle interaction energy indicates that the particles are stabilized by strong steric repulsions between PEG chains on their surface.     

Antifouling properties of poly(methyl methacrylate) films grafted with poly(ethylene glycol) monoacrylate immersed in seawater

Biofouling of all structures immersed in seawater constitutes an important problem, and many strategies are currently being developed to tackle it. In this context, our previous work shows that poly(ethylene glycol) monoacrylate (PEGA) macromonomer grafted on preoxidized poly(methyl methacrylate) (PMMAox) films exhibits an excellent repellency against the bovine serum albumin used as a model protein. This study aims to evaluate the following: (1) the prevention of a marine extract material adsorption by the modified surfaces and (2) the antifouling property of the PEGA-g-PMMAox substrates when immersed in natural seawater during two seasons (season 1: end of April-beginning of May 2007, and season 2: end of October-beginning of November 2007). The antifouling performances of the PEGA-g-PMMAox films are investigated for different PEG chain lengths and macromonomer concentrations into the PEGA-based coatings. These two parameters are followed as a function of the immersion time, which evolves up to 14 days. The influence of the PEGA layer on marine compounds (proteins and phospholipids) adsorption is evidenced by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). It was found that the antifouling efficiency of the PEGA-grafted surfaces increases with both PEGA concentration and PEG chain length.