Adsorption and Vibration of CI Atoms on Ni Low-index Surfaces

The 5-parameter Morse potential（5-MP） of the interactions between Cl atoms and Ni surfaces was constructed. The adsorption and diffusion of Cl atoms on Ni low index-surfaces were investigated with 5-MP in detail. All the critical characteristics of the system, such as adsorption site, adsorption geometry, binding energy, eigenvalues for vibration, etc. were obtained. The calculated results show that chlorine atoms are likely to be adsorbed on the high symmetry- sites. Cl atoms locate on the four-fold hollow sites of the intact Ni（100） surface, while they tend to occupy threefold sites on the Ni（ 111 ） surface. The four-fold hollow sites are the most stable adsorption sites on the Ni （110） surface for Cl, although the three-fold sites and the long-bridge sites are stable adsorption sites on the Ni（110） surface for the atoms of the first and second periods. For the Cl-Ni surface adsorption system, the surface binding energy of a Cl atom is relevant to the coarse degree of the cluster surface, and the binding energies have an order of Ni （ 111 ） 〈 Ni（100） 〈Ni（100）.     

Adsorption and Vibration of O on the Pt Stepped Surfaces

1 INTRODUCTION Atom adsorption on transition metal surfaces has attracted special attention as a basis for understand- ing the fundamental processes of oxidative cataly- sis. An oxygen-covered platinum surface for example, plays a central role in several important reactions, such as oxidation of carbon monoxide[1]. Moreover, the behavior of oxygen in the proximity of surface defects like kinks and steps is a central issue in understanding the chemisorption processes on ca- talytic surfaces…     

Oxygen Atom Adsorption and Diffusion on Pd Low-index Surfaces and （311） Stepped Surface

Introduction Atom adsorption on transition metal surfaces has attracted special attention as a base for understanding the fundamental processes of oxidative catalysis. Particularly interesting is the adsorption and diffusion of oxygen on well-defined metal surfaces. An oxygen covered palladium surface, for example, plays a central role in several important reactions such as oxidation of carbon monoxide and ammonia. In particular, the (100), (111), (110) surfaces and the interactions with oxyge…     

Adsorption and Vibration of Cl Atoms on Ni Low-index Surfaces

IntroductionThe study of adsorbed layers of chlorine on metalsingle crystals evokes a great deal of interest, as thissurface species acts as both a promoter and a poison ofcatalytic processes[1]. There are so many studies on theinteractions between Cl ato…     

Adsorption and Diffusion of O Atoms on Ag（210） Stepped Surface

The O-Ag(210)surface adsorption system was studied via the five-parameter Morse potential theory.Meanwhile,the 2O-Ag(210)system was investigated via the extended London-Eyring-Polanyi-Sato(LEPS)potential theory to learn the interaction between the adsorption states.Calculated results demonstrate that there are two stable on-surface adsorption sites(B and H)for O atoms on Ag(210)stepped surface.And the perpendicular vibrations are 30.3 and 42.9 meV,which are close to that observed in high resolution electron energy loss spectroscopy(HREELS).Also,there exists an octahedral subsurface adsorption state with a high vibrational frequency,and the interaction between the on-surface and subsurface O species is slight.The mode at 54.6 meV,which is close to that observed in HREELS(54-56 meV),is because of the vibration of the O atom on B site under the influence of that on H site.     

氢原子在Fe低指数面及高指数面(211)上的吸附和振动

摘要应用原子和表面簇合物相互作用的5参数Morse势方法(5-MP)对H-Fe低指数表面体系及高指数表面体系进行了系统研究, 并获得了吸附位、 吸附几何、 结合能和正则振动频率等全部临界点特性. 理论计算结果表明, 在Fe(100)面, H原子吸附在四重洞位, H-Fe的垂直振动频率为1 009 cm^-1; 在Fe(110)和Fe(211)表面, 趋向于吸附在赝式三重位, H-Fe的垂直振动频率分别为1 054和1 046 cm^-1; 而在Fe(111)表面最稳定的吸附位是近桥位, 频率为1 030 cm^-1.     

Fe（NO3）3-9H2O/Fe（HSO4）3： An efficient reagent system for the oxidation of alcohols,thiols and sulfides in the absence of solvent

Fe（NO3）3-9H2O/Fe（HSO4）3 was used as an efficient reagent system for the oxidation of alcohols to their corresponding carbonyl compounds. All reactions were performed in the absence of solvent in good to high yields. Under the same reaction conditions, thiols and sulfides were also converted to their corresponding disulfides and sulfoxides, respectively. 2007 Farhad Shirini. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Adsorption of Fe（CO）4 on the Sidewall of Boron Nitride Nanotubes： A Periodic DFT Study

The adsorption of Fe（CO）4 on various types of boron nitride nanotubes （BNNTs） areinvestigated by employing density functional theory. Our results indicate that Fe（CO）4 prefers to adsorb on the top of nitrogen atom via Fe atom, and the electronic property analysis indicates that the adsorption of Fe（CO）4 can reduce the band-gap of BNNTs.     

First-principles Calculations of H2O Adsorption Reaction on the GaN（0001） Surface

The adsorption and decomposition of H2O on GaN（0001） surface have been explored employing density functional theory （DFT）. Two distinct adsorption features of H2O on GaN（0001） corresponding to molecular adsorption and H-OH dissociative adsorption are revealed by our calculations. The activities of the surface reactions of H2O on GaN（0001） surface are investigated. For the stepwise processes of H2O decomposition into H2 in gas phase and adsorbed O atom （H2O（g）→H2O（chem）→OH（chem） ＋ H（chem）→2H（chem） ＋ O（chem）→H2（g） ＋ O（chem））, the first and second steps are facile and can even occur at room temperature; while the last two have high barriers and thus are difficult to proceed, especially the fourth step is endothermic. In short, H2O adsorption and decomposition into H2 in gas phase and adsorbed O atom on GaN（0001） surface are exothermic by -43.98 kcal/mol.     

Adsorption Site and State of Nitrogen Atom on Ru（0001）, （1010） Low-index and （1120）, （1121） Stepped Surfaces

The adsorptions of nitrogen atoms on Ru(0001), (1010) low index surfaces and (1120), (1121) stepped surfaces were investigated by the five-parameter Morse potential(5-MP) method in details. Calculated results demonstrate that N atoms show a tendency to be adsorbed at threefold sites. No subsurface state was found for N atoms on Ru(1010) surface. There exist 6 stable adsorption sites for N atoms on Ru(1121) stepped surface which can be classified into 3 types: the on-surface adsorption state, the facet adsor...     

氧原子在Mo低指数表面及(211)高指数面上的吸附和振动

应用原子和表面簇合物相互作用的5参数Morse势方法(5-MP)对O-Mo低指数表面体系及(211)高指数面体系进行了系统的研究,并获得了全部临界点特性,如吸附位、吸附几何、结合能、正则振动频率等,计算结果表明：在Mo(100)面,O原子吸附在四重洞位,随着覆盖度增加,(100)面发生缺行重构,膺式三重位为稳定吸附位;在Mo(110),(111)及(211)面,O原子均趋向于吸附在膺式三重位．     

氯原子在Ag低指数面上的吸附位和吸附态

应用原子和表面簇合物相互作用的5参数Morse势方法(简称5-MP)对Cl-Ag低指数表面体系进行了研究, 并获得了全部的临界点特性, 如吸附位、吸附几何、结合能、正则振动等. 计算结果表明: 在Ag(100)面上, Cl原子吸附在四重洞位; 在Ag(111)面上, Cl吸附在三重洞位; 尽管第一与第二周期原子在(110)面上的稳定吸附态大都为赝式三重位和长桥位, 但在Ag(110)面上, 四重洞位是氯原子的稳定吸附态. 理论分析结果和实验推测结果符合得很好. 理论结果给出Cl原子在Ag表面的吸附结合能和表面簇合物的粗糙度有关, 结合能从小到大的顺序为(111)＜(100)＜(110).     

氮原子在铁低指数面上的吸附位和吸附态

应用原子和表面簇合物相互作用的5参数Morse势方法(5-MP)对N-Fe低指数表面体系进行了系统的研究, 并获得了全部临界点特性, 如吸附位、吸附几何、结合能、正则振动频率等. 计算结果表明: 在Fe(100)面, N原子吸附在四重洞位; 在Fe(110)表面, 趋向于吸附在膺式三重位; 而在Fe(111)表面最稳定的吸附位是近似桥位.     

H原子在W低指数面上的吸附位和吸附态

应用原子和表面簇合物相互作用的5参数Morse 势及由5参数Morse势组装推广的LEPS方法对H-W低指数表面吸附体系进行了研究, 并获得了全部临界点特性. 计算结果表明, 低覆盖度下, H原子优先吸附在W(100)面的内层吸附位二层桥位B', 获得156 meV的垂直振动频率, 随着覆盖度的增加, H原子稳定吸附在表层的五重洞位(二层顶位)、桥位及顶位. 内层吸附位的优先吸附, 对与其邻近的表面吸附位的临界点性质有一定影响. 在W(110)面上只存在三重洞位的稳定吸附态, 垂直振动频率为151 meV. 在W(111)面上存在三种稳定吸附态, 子表面吸附位H₁, 桥位B'和顶位T, 分别获得104, 200, 259 meV的垂直振动频率. 在低覆盖度下, H原子优先吸附在子表面吸附位H₁.