(±)-亮氨酸的合成

以氨基丙二酸二乙酯盐酸盐(2)为原料通过一条全新路线合成了外消旋亮氨酸盐酸盐(1)。2的氨基经Boc保护制得Boc-氨基丙二酸二乙酯(3);3与甲代烯丙基氯发生取代反应制得Boc-氨基-(2-甲基-2-丙烯基)丙二酸二乙酯(4);4经Pd/C催化加氢制得Boc-氨基-(2-异丁基)丙二酸二乙酯(5);5在浓盐酸中回流反应,一步完成脱保护、脱羧、水解过程合成1。总收率55%,其结构经1H NMR和MS确证。     

从4-戊烯醛经增碳反应合成5-己烯酸甲酯类化合物

通过4,8,12-三甲基-4,8,12-三烯醛(1)类四戊烯醛衍生物的增一碳反应合成了5,9,13-三甲基-5,9,13-十四三烯醛甲酯(3)及5-己烯酸甲酯衍生物(7-9)。用甲氧基甲基三苯基膦处理4-戊烯醛类化合物生成烯基醚,PCC氧化所生成的烯醚则得到标题化合物,5-己烯酸甲酯类化合物。     

类Mannich反应合成2,5-二苯基-3,3-二取代-2,3-二氢-1,4,2-氧氮磷杂环戊烯-2-氧化物

本文报道了以苯甲酰胺,醛(或酮)苯基二氯化膦为原料进行的Mannich反应,其产物经部分水解合成了α-(N-苯甲酰氨基)二取代甲基苯基膦酸(Ⅰ),此化合物脱水关环得2,5-二苯基-3,3-二取代-2,3-二氢-1,4,2-氧氮磷杂环戊烯-2-氧化物(Ⅱ).经¹HNMR及元素分析证明了Ⅰ和Ⅱ的结构,并对反应机理进行了探讨。     

钯催化 1,3-丁二烯羧酯化合成 3-戊烯酸甲酯

 以 1,3-丁二烯、CO 和甲醇为原料, 进行羧酯化反应合成 3-戊烯酸甲酯是 Altam 路线生产己内酰胺绿色工艺的关键步骤. 将 Pd 与三齿 N-杂环配体或双膦配体组成的催化体系用于 1,3-丁二烯的羧酯化反应中, 其中乙酸钯/2,6-二 (3,5-二甲基吡唑基) 吡啶催化剂表现出中等的催化活性, 在 150 ºC, p(CO) = 6.0 MPa 的优化条件下反应 6 h, 1,3-丁二烯转化率为 78.8%, 3-戊烯酸甲酯选择性达 92.2% (TON = 226); 而乙酸钯/2,2?-二 (二苯基膦基) 苯醚催化体系的活性更高, 在优化反应条件下, 1,3-丁二烯转化率达 90.4%, 3-戊烯酸甲酯选择性为 91.6% (TON = 181). 在 200 ºC 及类似的羧酯化反应条件下, 1,3-丁二烯发生二聚反应, 其转化率为 99% 以上, 二聚产物 4-乙烯基-1-环己烯选择性高于 96%.     

沸石催化的2,4,4-三甲基-1-戊烯的酰化反应

通过HY沸石与某些传统催化剂的比较，发现HY在2，4，4-三甲基-1-戊烯与乙酸酐的酰化反应中比那些传统催化剂更有效．用HY沸石作催化剂，室温下通过2，4，4-三甲基-1-戊烯与乙酸酐的酰化反应，合成了三种异构体，即4-（2，2-二甲基丙基）-4-戊烯-2-酮、（E）-4，6，6-三甲基-4-庚烯-2-酮和（Z）-4，6，6-三甲基-4-庚烯-2-酮．考察了HY沸石的用量对该酰化反应的影响．当2，4，4-三甲基-1-戊烯／乙酸酐／HY沸石=1mmol／10mmol／0．250g，反应温度25℃、反应时间2h时，生成的三种异构体产率之和为72％，HY沸石对于该反应具有极好的选择性和优良的活性稳定性，不同阳离子交换的Y沸石也用于催化2，4，4-三甲基-1-戊烯的酰化反应。     

从4-戊烯醛经增碳反应合成5-己烯酸甲酯类化合物(英文)

通过4,8,12-三甲基-4,8,12-三烯醛(1)类四戊烯醛衍生物的增一碳反应合成了5,9,13-三甲基-5,9,13-十四三烯醛甲酯(3)及5-己烯酸甲酯衍生物(7～9)。用甲氧基甲基三苯基膦处理4-戊烯醛类化合物生成烯基醚,PCC氧化所生成的烯醚则得到标题化合物,5-己烯酸甲酯类化合物。     

蒽单元和1,3-二硫杂环戊烯-2-硫酮单元构建的三组分荧光传感器与汞(II)的反应及其在离子液中的荧光性质

4,5-二(2’-氰乙基硫基)-1,3-二硫杂环戊烯-2-硫酮在甲醇钠的作用下消除一个氰乙基,形成1,3-二硫杂环戊烯-2-硫酮单钠盐,再与9,10-二(氯甲基)蒽反应生成由两个1,3-二硫杂环戊烯-2-硫酮(DMIT)单元和一个蒽单元构建的新型三组分荧光传感器.这种新的荧光分子传感器与乙酸汞(II)的反应,却生成具有强荧光的二乙酸蒽-9,10-二甲酯(4)和双(1,3-二硫杂环戊烯-2-酮-4,5-二硫)Hg(II)配合物(5),利用化合物4的强荧光性质可以选择性识别Hg(II).还在离子液中研究此荧光分子传感器特殊的荧光行为,实验结果表明随着离子液量的增加,溶液的荧光显著增强.     

固定化嗜热酯酶催化拆分(R,S)-2-甲基-1-丁醇

利用帆布固定化嗜热酯酶APE1547(3)在非水介质中催化转酯化反应进行酶促拆分(R,S)-2-甲基-1-丁醇制备(S)-2-甲基-1-丁醇(4).初步探讨了溶剂、酰基供体、温度及底物配比对3的催化活力(EA3)′与4对映选择性比率(E4)的影响.在最佳拆分条件下,EA3 =0.53 μmol·min-1·mg-1,E4=15.4.3套用8次后仍然保持较高的催化活性.     

第五、六族元素的有机化合物在有机合成中应用的研究 ⅩⅩⅠⅩ.甲氧羰基亚甲基三苯基膦、胂与2-全氟炔酸甲酯的反应以及3-全氟烷基-戊烯二酸二甲酯的合成

甲氧羰基亚甲基三苯基膦(1a)、胂(1b)与2-全氟炔酸甲酯(2)在无水苯中迅速反应,生成高产率的加合物3.3的结构通过元素分析、红外光谱、核磁共振谱和质谱予以鉴定,并证明了反应机理.胂叶立德3d,3e和3f在温和条件下水解,砷—碳键断裂,合成了高产率的3-全氟烷基-戊烯二酸二甲酯(7).     

2-氰基-2,3,3-三甲基-5-硫代-吡咯烷的合成新法

以3,3-二甲基-4-戊烯酸甲酯为原料, 经过6步反应合成了目标产物2-氰基-2,3,3-三甲基-5-硫酮-吡咯烷, 反应的总收率约为37%, 其中关键步骤为分子内环化和碘化氢消除反应. 通过元素分析, ¹H NMR, IR和MS对所合成化合物的结构进行了表征.     

Synthesis of 4-aminocycloheptimidazoles

2-Methyl- 1a , 2-phenyl- 1b , and 2-amino-4-(2-methyl-1,3-dioxolan-2-yl)cycloheptimidazole ( 1c ) were treated with hydrazoic acid to give the corresponding 4-aminocycloheptimidazoles, respectively. However, the reaction of 4-(2-methyl-1,3-dioxolan-2-yl)cycloheptimidazole gave complex material. Some approaches to the synthesis of 4-aminonocycloheptimidazole itself are also described.     

Hetarylnitrenes V. Reactions of Tetrazolopyrazine Ring Contraction of Nitrenodiazines in Solution. Preliminary communication

Thermolysis of tetrazolopyrazine ( 1 ) in organic solvents gives pyrazinylnitrene ( 2 ) which undergoes ring contraction to 1-cyanoimidazole ( 3 ). 7-Methyl-5-methylthio-tetrazolo[1,5-c]pyrimidine ( 4 ) likewise gives 1-cyano-2-methylthio-4-methyl-imidazole ( 6 ). The two tetrazoles also undergo ring contraction to 1-cyanoimidazoles by gas chromatography, and 1 gives a low yield of 3 by photolysis. Thermolysis of 1 and 4 in cyclohexane gives aminopyrazine ( 7 ) and 6-amino-4-methyl-2-methylthio-pyrimidine ( 8 ), respectively. Tetrazolo[1,5-a]pyrimidines ( 9 ) give only 2-aminopyrimidines ( 10 ). 1-Cyanoimidazole, formed by thermolysis of 1 in acetic acid, reacts further to give 1-acetylimidazole, which with more acetic acid gives imidazole and acetic anhydride. An earlier report [2] of ring expansion of pyrazinylnitrene in acetic acid is discredited. In protic deuteriated solvents (D₃O, CH₃OD), tetrazolopyrazine reacts as an enamine, specifically exchanging H? C(6) for deuterium.     

Synthesis of some 1-methyl-3-alkoxy-5-arylpyrrolecarboxylic acids and derivatives

By a combination of hydrolysis, decarboxylation, and methylation diethyl 1-methyl-3-hydroxy-5-phenylpyrrole-2,4-dicarboxylate was converted into 1-methyl-3-methoxy-5-phenyl-pyrrole-2,4-dicarboxylic acid (5) and into the isomeric compounds ethyl 1-methyl-2-phenyl-4-methoxypyrrole-3-carboxylate (4a) and ethyl 1-methyl-3-methoxy-5-phenylpyrrole-2-carboxylate (9a). 1-Methyl-2-phenyl-4-methoxypyrrole-3-carboxylic acid was synthesized both by the selective decarboxylation of 5 and by the hydrolysis of 4a. Hydrolysis of 9a, however, did not give the corresponding acid, but rather an oxidation product, 1-methyl-3-methoxy-5-hydroxy-5-phenyl-3-pyrrolin-2-onc (10a). Compound 10a was shown to arise from the air oxidation of the completely decarboxylated product, 1-methyl-2-phenyl-4-methoxypyrrole. Reduction of 9a with lithium aluminum hydride gave 1-methyl-3-methoxy-5-phenylpyrrole-2-methanol, which yielded 10a upon oxidation with silver oxide.     

Synthesis of 3-substituted 2-oxo-1,4-thiazines and evaluation of their protective effect against endotoxin shock in mouse.

5-Methyl-2,3-dioxo-2H,4H-1,4-thiazine (7) was obtained by the oxidation of 5-methyl-2H-1,4-thiazin-3(4H)-one (5) with m-chloroperbenzoic acid in MeOH, followed by acid hydrolysis of the resulting 2,2-dimethoxy-1,4-thiazine (6). 3-Chloro-2-oxo-1,4-thiazine (10), which was obtained from 7 by heating with phosphorous oxychloride, reacted with various nucleophiles to give 3-substituted 2-oxo-1,4-thiazines (11a--y). Some of these 2-oxo-1,4-thiazines, 11a--b, e, o and r--s, showed a protective effect against endotoxin shock in D-galactosamine-sensitized mice.     

Synthesis of (±)-pyrenophorin utilizing 1,3-dipolar cycloaddition of silyl nitronate for the construction of 16-membered ring

1-Methyl-4-nitrobutyl acrylate underwent 1,3-dipolar cycloaddition via its silyl nitronate to give isoxazoline derivative of 16-membered dilactone after acid treatment, from which (±)-pyrenophorin was synthesized.     

Synthesis and Some Properties of 2-(5-Methyl-2-Phenyl-2H-1,2,3-Diazaphosphol-4-yl)-4H-Benzo[d]-1,3,2-Dioxaphosphorin-4-One

Abstract

2-(5-Methyl-2-phenyl-2Н-1,2,3-diazaphosphol-4-yl)-4H-benzo[d]-1,3,2-dioxaphosphorin-4-one 1 readily reacts with hexafluoroacetone, mesoxalic acid diethyl ester, trifluoropyruvic acid ethyl ester and chloral to give 2-(5-methyl-2-phenyl-2H-1,2,3-dizaphosphole-4-yl)-derivatives of 1,3,2- and 1,4,2-dioxaphosphepines.     

Reactions of fused dihydro-1,2,4-thiadiazoles with isoselenocyanates giving 6aλ4-thia-1,3,4,6-tetraazapentalene derivatives and 5,10-dihydro-1,2,4-thiaselenazolo[4,5-b][2,4]benzodiazepines

3-Methyl-6,7-dihydro-5H-1,2,4-thiadiazolo[4,5-a]pyrimidine (1) reacted with isoselenocyanates with elimination of acetonitrile and concomitant addition of two molecules of the isoselenocyanate to give 2,3-di-substituted-6,7-dihydro-5H-2aλ⁴-thia-2,3,4a,7a-tetraazacyclopent[cd]indene-1(2H),4(3H)-diselones (6a)–(6j). 3-Methyl-5,10-dihydrobenzo[e]-1,2,4-thiadiazolo[4,5-a][1,3]diazepine (3) likewise reacted with alkyl isoselenocyanates to give the 2,3-dialkyl-5-10-dihydro-2aλ⁴-thia-2,3,4a,10a-tetraazapentaleno[3,3a,4-gh]benzocycloheptene-1,4-diselones (9a)–(9h), but reaction of (3) with aryl isoselenocyanates took place with elimination of acetonitrile and incorporation of one molecule of the aryl isoselenocyanate in the product to give 3-arylimino-5,10-dihydro-1,2,4-thiaselenazolo[4,5-b][2,4]benzodiazepines (10a)–(10h). Structure (10) is a new heterocyclic system. The pyrimidine (1) and the diazepine (3) reacted with aryl isoselenocyanates at room temperature in solvents of low polarity to give zwitterion 1:1 addition compounds (7) and (12), respectively. NMR studies reveal that the thiaselenazoles (10) react in solution with aryl isoselenocyanates to give diaryl diselones (11) in a reversible process involving a Dimroth rearrangement. © 1996 John Wiley & Sons, Inc.     

Reaction of 6-methyl-6-p-tolyl-4-ethoxy-5,6-dihydro-pyran-2-one1 with perchloric acid

6-Methyl-6-p-tolyl-4-ethoxy-5,6-dihydro-pyran-2-one (1) undergoes decarboxylative elimination with perchloric acid in ether to give 4-p-tolyl-3-penten-2-one (3), the structure of which has been confirmed through an unambiguous synthesis.

---

Reaktion von 6-Methyl-6-p-tolyl-4-ethoxy-5, 6-dihydro-pyran-2-on mit PerchlorsäureKurze Mitteilung

Zusammenfassung Die Titelverbindung (1) ergibt mit Perchlorsäure unter decarboxylierender Eliminierung 4-p-Tolyl-3-penten-2-on (3). Die Struktur von3 wurde mittels eines eindeutigen Syntheseweges festgelegt.

     

The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Ein neuer Zugang zum tetracyclischen Grundgerüst des Cyclohepta (def)fluorens

A New Synthetic Way to the Tetracyclic Skeleton of Cyclohepta (def)fluorene The synthesis of 2-Methyl-4, 5, 6, 8, 9, 10-hexahydrocyclohepta (def)fluorene 2 is described starting with the reduction of the ketone 3 by a (1:1)-mixture of LiAlH₄/AlCl₃ to the hydrocarbon 4 . After metallation with butyllithium 4 was allowed to react with bromoacetic acid to yield 5 . The cyclization of this compound was performed with p-toluenesulfonic acid to give the tetracyclic ketone 6 which was converted to the tetracyclic hydrocarbon 2 by reduction with LiAlH₄/AlCl₃.