Photoinduced ionic polymerization. V. Coexistence of cationic and anionic polymerizations

Photopolymerization of a mixture of cyclohexene oxide and nitroethylene was carried out with the purpose of carrying out cationic and anionic polymerizations simultaneously in the same system. The excitation of the charge transfer band by light of wavelength longer than 390 nm gives rise to the polymerization of both monomers. No polymer was obtained in the dark. Additives affect the composition of the polymer, the rates of polymerization, and the molecular weight distributions. These data show that cationic polymerization of cyclohexene oxide and anionic polymerization of nitroethylene occurs simultaneously in this system.     

Polymerization of vinyl monomers initiated by KO2–charge transfer agent systems. II

Vinyl monomers having electron acceptor groups such as nitroethylene, acrylonitrile, and acrolein were polymerized by KO₂–charge transfer agent initiator systems in dimethylsulfoxide (DMSO) at 25°C. The new initiator systems were found to be stable for almost 1 month under nitrogen atmosphere. The initial rate of polymerization was so fast that both conversion and molecular weight of the polymers obtained were high. Especially their molecular weight distribution was observed to be very narrow by means of gel permeation chromatography (GPC). The anion radicals generated by one electron transfer from potassium superoxide (KO₂) to charge transfer agents such as naphthalene, benzoquinone, azobenzene, etc., were suitable as initiator for the anionic polymerization of electron acceptor monomers. Study on block copolymerization of nitroethylene with acrylonitrile or acrolein was also attempted.     

Homopolymerization and [2 + 4]/[3 + 2] cycloaddition in the reaction of nitroethylene with vinyl ethers

The reaction of nitroethylene with isobutyl vinyl ether was reinvestigated. In agreement with the report of Kushibiki, Irie, and Hayashi (J Polym Sci Polym Chem Ed 1975, 13, 77), cycloaddition accompanied the anionic homopolymerization of nitroethylene. However, the cycloadduct was not a cyclobutane but a bicyclic oxazolidine, in keeping with the more recent report by Denmark and Hurd (J Org Chem 1998, 63, 3045). Cycloaddition accompanied by the anionic homopolymerization of nitroethylene was general for a series of vinyl and silyl ethers. Mechanistically, the cycloadducts formed by a cis–syn concerted approach of the reactants, whereas a trans–anti approach gave a zwitterionic tetramethylene that initiated anionic homopolymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1886–1891, 2001     

Spontaneous copolymerization of 1,3-cyclohexadiene with polar vinyl monomers

In the reactions of 1,3-cyclohexadiene(1,3-CHD) with polar vinyl monomers, CH₂?C(X)Y (X is -? CN and ? CO₂CH₃; Y is ? CI, ? H, and ? CH₃), the two α-chlorosubstituted monomers underwent rapid spontaneous copolymerization, accompanied by the formation of a small amount of cycloadduct. Both polar monomers also gave predominantly copolymers in the reaction with 1,3-cycloheptadiene(1,3-CHpD) in lower yield. 1,3-Cyclooctadiene (1,3-COD) reacted only with α-chloroacrylonitrile (CAN) to give a copolymer, while only cycloaddition took place in systems involving cyclopentadiene(CPD) as diene. The charge–transfer (CT) complex formation of 1,3-CHD with CAN and methyl α-chloroacrylate(MCA) was confirmed by ultraviolet spectroscopic studies and the equilibrium constants estimated were 0.18 and 0.07 liter/mole, respectively, at 25°C in chloroform as solvent. The activation energies for the copolymerizations of 1,3-CHD with CAN and MCA in benzene were determined to be ca. 6.6 and 9.6 kcal/mole, respectively. In the system composed of 1,3-CHD and CAN, only the copolymerization was affected by solvents used and oxygen. Although addition of ZnCl₂ to the system resulted in the acceleration of the both reactions, the variation in the product ratio of copolymer to cycloadduct with ZnCl₂ concentration showed a maximum. Based on the results in the present and preceding studies for systems involving 1,3-cyclodienes and acceptor monomers, the relationship between the cycloaddition and the spontaneous copolymerization is discussed.     

Frontal polymerization with encapsulated monomer

Thermal frontal polymerization (TFP) is the process that converts monomers into polymers by means of a spatially localized self-propagating thermal reaction wave. Free radical frontal polymerization systems can suffer from a limited pot life, i.e. the systems will spontaneously polymerize while remaining at ambient pressure and temperature before they can be used. One way to avoid this undesirable spontaneous polymerization is by microencapsulating the monomer. The release of monomer from its shell can be modeled as a temperature dependent or temperature independent reaction; we consider both cases. Conditions are established which reduce the current model to the standard FP model and extinction limits are determined by employing an asymptotic analysis of the reaction zone in the limit as the reaction zone shrinks to an interface.     

Recent Progress of Photo- and Radiation-Induced Ionic Polymerizations

Photoinduced ionic polymerizations of the monomers α-methylstyrene, cyclohexeneoxide, nitroethylene, and acrylonitrile were carried out in the presence of electron acceptor or donor molecules. These polymerizations are proved to be initiated by ions formed through the dissociation of the photoexcited electron donor-acceptor complex and to proceed by ionic mechanism.

The molecular weight distribution of the polymer and the light intensity dependency on the rate of polymerization indicate that free ionic and ion-pair propagations coexist in the cationic polymerization of α-methylstyrene.

Anionic polymerizations were observed for the nitroethylenetetrahydrofuran and acrylonitrile-dimethylformamide systems.

Radiation-induced cationic polymerizations of styrene and α-methylstyrene were found to proceed by free cationic propagation. The effect of added electron acceptors in these polymerizations was investigated.     

二过碘酸合银(II)氧化还原引发丙烯酸甲酯在尼龙1010上接枝共聚合反应的研究

二过碘酸合银（ＩＩ）氧化还原引发丙烯酸甲酯在尼龙１０１０上接枝共聚合反应的研究刘盈海刘卫宏赵敏孟劲功（河北大学化学系保定０７１００２）关键词二过碘酸合银（ＩＩ）钾，尼龙１０１０，氧化还原引发，丙烯酸甲酯，接枝共聚目前Ｃｅ（ＩＶ）被认为是一种十分...     

Spontaneous Single‐Crystal‐to‐Single‐Crystal Evolution of Two Cross‐Laminated Polymers

Two cases of spontaneous evolution of monomers to linear polymers having novel cross‐laminated topology are reported. We synthesized two peptide monomers N₃‐Gly‐Gly‐NH‐CH₂‐CCH and N₃‐Gly‐Gly‐Gly‐CH₂‐CCH and solved their crystal structures by single‐crystal X‐ray diffraction. They adopt H‐bonded crisscrossed layered packing in their crystals such that: (a) the monomers are aligned head‐to‐tail in 1D‐chain‐like arrays and parallel arrangement of such arrays forms a layer; (b) the proximally placed azide and alkyne motifs are in an orientation apt for their regiospecific cycloaddition; (c) each monomer having x peptide bonds is H‐bonded with 2x monomers disposed in intersecting arrangement, which pre‐organize 1D‐chain‐like arrays in adjacent layers in perpendicular orientation. These crystals underwent spontaneous single‐crystal‐to‐single‐crystal (SCSC) polymerization via azide–alkyne cycloaddition reaction to form triazolyl‐polyglycines, at room temperature. The crisscrossed arrangement of monomers in adjacent layers ensured the formation of cross‐laminated polymers.     

Chain-growth cycloaddition polymerization via a catalytic alkyne [2 + 2 + 2] cyclotrimerization reaction and its application to one-shot spontaneous block copolymerization

A cobalt-catalyzed alkyne [2 + 2 + 2] cycloaddition reaction has been applied to polymerizations yielding linear polymers via selective cross-cyclotrimerization of yne-diyne monomers, which occurs in a chain-growth manner. Additionally, through control of the alkyne reactivity of the two monomers, this method was efficiently applied to the spontaneous block copolymerization of their mixture. Here we present the proposed mechanism of the catalyst transfer process of this cycloaddition polymerization.     

The charge-transfer polymerization of nitroethylene in electron-donating solvents

The anionic polymerization of nitroethylene was studied in N,N-dimethylformamide (DMF) and in dimethyl sulfoxide (DMSO) at 0–40°C. The polymerization proceeds spontaneously when monomer is mixed with solvent in the absence of light. From the observed results of the rate of polymerization, the molecular weight of polymer, the effects of additives and solvents, the copolymerization with acrylonitrile, and the optical absorption spectra it is concluded that the polymerization is initiated by the nitroethylene radical anion generated by the slow dissociation of the electron donor–acceptor (EDA) complexes between the solvent molecule and the monomer. The activation energy for the rate of polymerization was 50 and 29 kJ/mole in DMF and DMSO, respectively, which seems to be determined primarily by the dissociation of the EDA complexes. The significant features of this polymerization are that the initiation proceeds slowly and there is essentially no termination.     

Thermally reversible polymer linkages. II. Linear addition polymers

The stepwise addition polymerization reactions of bisazlactones [bis(2-oxazolin-5-one)s] and a variety of 4,4′-bisphenols have been studied for the purpose of making thermally reversible linear polymers. Thus polymerization occurs at or near room temperature, while depolymerization yielding the two monomer species occurs at elevated temperatures. The synthesis of oligomers in solution without the use of catalyst occurs for the reaction of bisazlactones with bisphenols containing an electron-withdrawing moiety between the two phenol groups of the bisphenol. These oligomers regenerate the bisphenol and bisazlactone monomers upon heating to 165–200°C for several hours under dry box conditions. In many cases, these reactions follow the same patterns of reactivity observed in model studies. This chemistry may be useful for forming degradable or recyclable polymers, where shortchain prepolymers, or macromonomers, endcapped with azlactone and phenol moieties could be used to form high molecular weight polymers that are thermoreversible. Such a reaction system might also be used for preventing reactions of bisphenols and/or bisazlactones at low temperatures, with the desired reaction initiated by formation of the reactive species at elevated temperatures. Envisioned uses in this case might be thermally triggered crosslinking or polymerization reactions, or temperature controlled drug release. © 1993 John Wiley & Sons, Inc.     

Theoretical study on reactions of nitroethylene with the Si(100)-2 x 1 surface

Possible reaction pathways of nitroethylene with the Si(100)-2 x 1 surface have been investigated by unrestricted density functional theory. The facile occurrence of the studied reactions was demonstrated by the low activation energies of the rate-determining steps (1.07-5.23 kcal/mol). It was found that the [4 + 2] cycloaddition reaction of nitroethylene is most kinetically favorable. The isomerization reactions of the addition products were also investigated. The [3 + 2] cycloaddition product may further undergo a rearrangement by overcoming a 12.37 kcal/mol activation energy barrier into an isomer, with an oxygen atom of the nitryl group inserted between two silicon atoms of the Si(100) surface.     

线型缩聚反应的计算机模拟

缩聚反应是一类重要的高分子合成方法。其中最简单的反应为线型缩聚体系,它可分为两类,分别是含有两个可缩合的官能团的单体或单体对进行的相互缩合的体系。Flory在上世纪四十年代采用统计方法对该缩聚体系做过系统的理论研究,并在官能团等活性的假定下提出了著名的Flory分布函数,由此揭示了反应体系中数均聚合度xn、重均聚合度xw、不同聚合度分子的分布情况与反应程度p的关系。本文利用计算机模拟的方法,同样在官能团等活性的假定下模拟了线性缩聚反应的全反应过程,所得到的结果与用统计方法所得到的结果完全一致。本方法是对整个真实反应过程的直观模拟,对研究相似的以逐步聚合反应机理进行的反应具有普适性,并具有可拓展到模拟更真实的粘性聚合体系以及研究反应动力学的潜力。     

1,3-二(炔丙基氧)苯与4,4'-二叠氮甲基联苯的聚合反应及聚合物性能的研究

研究了1,3-二(炔丙基氧)苯(BPOB)与4,4'-二叠氮甲基联苯(DAMBP)的本体聚合行为. 核磁共振氢谱(¹H NMR)表征了聚合物的结构, 通过傅立叶红外技术(FT-IR)观察了反应过程中的基团变化情况, 采用差示扫描量热技术(DSC)研究了聚合反应动力学, 在较低温度(80 ℃)下二元叠氮与二元炔发生了1,3-偶极环加成聚合反应, 生成了主链含三唑环的聚合物; 利用Kissinger法和Crane法处理得到了反应的动力学参数: 反应级数为0.92, 反应活化能E_a为79.8 kJ• mol^－1, 频率因子A为1.26×10¹⁰ min^－1. 利用凝胶渗透色谱(GPC)、动态热机械分析(DMA)和热重分析方法(TGA)研究了聚合产物的性能. 结果表明, 聚合物的数均分子量达4.22×10⁴, 聚合物有较高的玻璃化转变温度和良好的热稳定性, 玻璃化转变温度达到131 ℃, 热分解温度(T_d5)达355 ℃     

Synthesis and hydrolysis behavior of side-chain functionalized norbornenes

[reaction: see text] The stabilities of various functionalized norbornenes that are monomers for the ring-opening metathesis polymerization (ROMP) in aqueous solution were evaluated toward hydrolysis under a range of temperatures (37, 60, and 80 degrees C) and pH values (3-9). All monomers contain hydrolyzable linkages to pendant functional groups, and conclusions were drawn relating to how the chemical diversity of these pendant functional groups, in accordance with the pH and temperature variations, affect hydrolysis of the aforementioned linkages. The hydrolysis was monitored by reverse phase HPLC analysis, and/or NMR spectroscopy. As expected, monomers containing ester linkages were fairly labile at higher pH values, while acetal-based linkers were cleaved at lower pH values. Beta-amino ester groups experienced a significant increase in hydrolysis rate, while carboxylic acid-containing monomers did not follow any clear trend. Saccharide-containing monomers exhibited unique behaviors for various pH values and temperature ranges.     

Stereospecific radical polymerization of fluoroalkyl acrylates

The free‐radical polymerization of 2,2,2‐trifluoroethyl acrylate (TFEA), 1,1,1,3,3,3‐hexafluoro‐2‐propyl acrylate (HFiPA) and perfluoro‐tert‐butyl acrylate (PFtBA) was carried out under various conditions and the stereostructure of the obtained polymers was investigated. Most polymerizations of the three monomers afforded polymers rich in diad syndiotacticity (r) in bulk or in solution; the r‐specificity was higher in the HFiPA and PFtBA polymerization than in the TFEA polymerization. Although the tacticity was nearly independent of reaction temperature during the polymerization of TFEA, the r‐specificity increased by lowering the reaction temperature during the polymerization of the other two monomers. The polymerization stereochemistry was also affected by the reaction solvents including toluene, tetrahydrofuran, and fluoroalcohols. It was noted that the stereochemistry of the polymerization of HFiPA and PFtBA also depended on the monomer concentration, and a lower monomer concentration led to a higher r‐specificity. By optimizing the aforementioned reaction conditions, the poly(HFiPA) having r = 81% (polymerization in tetrahydrofuran at −98 °C at [M]_o = 0.2M) and the poly(PFtBA) having r = 77% (polymerization in toluene at −78 °C at [M]_o = 0.2M) were obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1024–1032, 2000     

PU/纳米SiO2溶胶杂化材料的前端聚合研究

前端聚合(FP)是通过在单体前端区域引发增长聚合将单体合成为聚合物的一种不同于传统的反应模式．它是一种通过局部反应区域在聚合物单体中的移动而将聚合物单体转变为聚合物的一种反应模式,主要运用在放热反应中,在反应初始阶段进行短时间的加热,然后停止加热,借助放热反应的热自催化完成单体的聚合。根据反应机理的不同,     

Step‐Growth Copolymerization Between an Immobilized Monomer and a Mobile Monomer in Metal–Organic Frameworks

The A–A/B–B step‐growth copolymerization between a monomer immobilized in the crystalline state and a monomer mobile in the solution state is demonstrated. One of the two monomers was immobilized as organic ligands of the metal–organic framework (MOF) and polymerized with the mobile guest monomer, resulting in the formation of linear polymers. The polymerization behavior was completely different from that of the solution polymerizations. In particular, the degrees of polymerization (DP) converged to a specific value depending on the MOF structures. The inevitable termination is caused not by imperfectness of the polymerization reaction, but by the selection of the two polymerization partners among the several adjacent immobilized monomers. This is fully supported by the Monte Carlo simulation on the basis of the polymerization mechanism. Precise immobilization of monomers in the supramolecular assemblies is a promising way for the controlled A–A/B–B step‐growth polymerization.     

可聚合乳化剂合成苯乙烯-丙烯酸丁酯-α-烯烃磺酸钠共聚物乳液

以工业原料α-烯烃磺酸钠(AOS)作为可聚合乳化剂,苯乙烯(St)和丙烯酸丁酯(BA)为单体,采用预乳化种子乳液聚合合成了St-BA-AOS共聚物乳液.通过测定AOS与两种单体的竞聚率确定了半连续加料法的聚合方式.探讨了单体的加料方式、反应温度、反应时间、AOS用量等工艺条件对胶乳的影响,获得了最佳聚合条件.IR,NMR和DSC测试结果分析表明:St,BA与AOS发生了自由基共聚反应,形成的P(St-BA-AOS)共聚物结构中含有磺酸基等亲水性基团有利于乳液的稳定.在此基础上考察了AOS用量对乳液的固含量及乳胶粒粒径等的影响.结果表明:随着AOS用量的增加,乳液的固含量增加、乳胶粒的平均粒径减少.当AOS含量为2%时乳液的固含量为45.01%,平均粒径为74 nm,粒径分布指数为0.08,玻璃化温度为23.17℃.TEM测试结果显示,用相同量的AOS代替十二烷基硫酸钠可得到粒径更小和粒径分布更为均匀的乳液体系.     

Modification of polymers via electrophilic aromatic substitution

Three vinyl monomers, 2,4,6-trimethoxystyrene, 4-(N,N-dimethylamino)styrene, and N-methyl-2-vinylpyrrole, were synthesized via the Wittig reaction from the corresponding aldehyes. These monomers were homopolymerized by radical polymerization using α,α′-azoisobutyronitrile (AIBN) as initiator at 60°C. The reaction of these polymers with 4-phenyl-1,2,4-triazoline-3,5-dione (phTD) and 4-methyl-1,2,4-triazoline-3,5-dione (MeTD) was investigated. Although polytrimethoxystyrene reacts slowly with PhTD at room temperature, the other two polymers react fast and lead to the incorporation of the triazolinedione unit into the side chain of the polymer via electrophilic aromatic substitution. The reaction of bistriazolinediones (BTD) with these polymers was performed in dimethylformamide using 10–20% molar concentration of the BTD. The resulting crosslinked polymers are insoluble in polar as well as nonpolar solvents. Some physical properties of the unmodified and modified polymers were studied.