Stability domains of the vertical equilibrium state of a triple simple pendulum

The stability boundaries for the vertical equilibrium position of a triple simple pendulum subject to asymmetric follower force are analyzed. The effect of the upper spring and the magnitude of the follower force on the roots of the characteristic equation is studied Translated from Prikladnaya Mekhanika, Vol. 44, No. 10, pp. 122–134, October 2008.     

Equilibrium of an Inverted Mathematical Double-Link Pendulum with a Follower Force

A discrete model of an elastic pendulum with a follower force is studied. This model is an inverted mathematical two-link pendulum with viscoelastic hinges. It is shown that divergent bifurcations are possible for some absolute values of the follower force and the stiffness of the restraint of the pendulum's upper end. As a result, the vertical position of the equilibrium becomes unstable and two new nonvertical stable equilibrium states (fork bifurcation) occur.     

Equilibrium states of a pendulum with an asymmetric follower force

The effect of the linear eccentricity of the follower force on the equilibrium states of an inverted pendulum is examined. Bifurcation points and catastrophes associated with changes in pendulum parameters and type of springs are analyzed. Phase flows are plotted __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 4, pp. 121–129, April 2007.     

Evolution of the equilibrium states of an inverted pendulum

The influence of the pendulum parameters and the follower force on the evolution of equilibrium states is analyzed using a generalized mathematical model of inverted pendulum. Equilibrium curves are plotted using the parameter continuation method. It is shown that the pendulum with certain values of the angular eccentricity has one or three nonvertical equilibrium positions __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 3, pp. 122–131, March 2007.     

Limit cycles of a double pendulum with nonlinear springs

The limit cycles of a double pendulum with hard, soft, or linear springs subject to a follower force are drawn using computer simulation     

Theory of inverted pendulum with follower force revisited

The effect of the type of springs on the equilibrium states of an inverted pendulum is examined. The angular and linear eccentricities of the follower force are taken into account __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 6, pp. 126–137, June 2007.     

Generalized Mathematical Model of an Inverted Multilink Pendulum with Follower Force

A problem formulation and differential equations are given to describe the plane-parallel motion of an inverted multilink pendulum with an asymmetric follower force acting at the elastically restrained upper end. The physical nonlinearities of the springs are taken into account. The possible mechanisms of energy dissipation are described__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 5, pp. 124–130, May 2005.     

Divergent Bifurcations of a Double Pendulum under the Action of an Asymmetric Follower Force

The paper studies the influence of the orientation parameter of the follower force on the behavior of the pendulum with a simple zero eigenvalue in the linearization matrix     

Limit cycles of a double pendulum subject to a follower force

It is shown that there is a magnitude of the follower force at which two limit cycles, stable and unstable, are born in the phase space of a double simple pendulum     

Influence of the Nonlinearity of the Elastic Elements on the Stability of a Double Pendulum with Follower Force in the Critical Case

A generalized mathematical theory of a double mathematical pendulum with follower force is used to analyze the stability of the vertical equilibrium position of the pendulum with both linear and nonlinear (hard and soft) elastic elements in the critical case of one zero root of the characteristic equation. The influence of the parameters of these elements on the safe and dangerous sections of the stability boundary is demonstrated__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 133–142, April 2005.     

The equations of an inverted pendulum with an arbitrary number of links and an asymmetric follower force

This paper formulates a problem for and gives the differential equations of plane-parallel motion of an inverted n-link pendulum subject to an asymmetric follower force applied at the upper end via a spring. The physical nonlinearities of springs are taken into account. The possible mechanisms of energy dissipation are described __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 5, pp. 106–114, May 2007.     

Influence of material and geometrical nonlinearities on the bifurcations of equilibrium states of a two-link pendulum

The equilibrium states of an inverted two-link simple pendulum with an asymmetric follower force are classified depending on the characteristics of the springs (hard, soft, or linear) at the upper end and at the hinges. Phase portraits are plotted. The bifurcation points on the equilibrium curves are identified. Emphasis is on fold and cusp catastrophes __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 8, pp. 115–128, August 2007.     

Influence of the Nonlinear Characteristics of Elastic Elements on the Bifurcations of Equilibrium States of a Double Pendulum with Follower Force

A generalized mathematical model of an inverted double pendulum with asymmetric follower force is developed. The model accounts for all possible types of springs: hard, soft, and linear. The influence of equitype springs on the equilibrium states is examined__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 103–109, February 2005.     

The Dynamics of Finite-Dimensional Systems Under Nonconservative Position Forces

General theorems on the stability of stationary states of mechanical systems subjected to nonconservative position forces are presented. Specific mechanical problems on gyroscopic systems, a double-link pendulum with a follower force and elastically fixed upper tip, multilink pneumowheel vehicles, a monorail car, and rail-guided vehicles are analyzed. Methods for investigation of divergent bifurcations and catastrophes of stationary states are described     

Bifurcation analysis of the motion of an asymmetric double pendulum subjected to a follower force: Codimension three problem

Local and global bifurcations in the motion of a double pendulum subjected to a follower force have been studied when the follower force and the springs at the joints have structural asymmetries. The bifurcations of the system are examined in the neighborhood of double zero eigenvalues. Applying the center manifold and the normal form theorem to a four-dimensional governing equation, we finally obtain a two-dimensional equation with three unfolding parameters. The local bifurcation boundaries can be obtained for the criteria for the pitchfork and the Hopf bifurcation. The Melnikov theorem is used to find the global bifurcation boundaries for appearance of a homoclinic orbit and coalescence of two limit cycles. Numerical simulation was performed using the original four-dimensional equation to confirm the analytical prediction.     

Influence of an Asymmetric Follower Force on the Stationary States of a Double-Link Pendulum

It is studied how the asymmetry of the follower force influences the stationary states of an inverted two-link mathematical pendulum with viscoelastic hinges and the upper end elastically fixed. It is shown that if the parameters of the system change, bifurcations of the stationary states leading to fold and cusp catastrophes become possible     

Global stabilization of a double inverted pendulum with control at the hinge between the links

We study the plane motion of a double pendulum with fixed suspension point. The pendulum is controlled by a single moment applied to the internal hinge between the links. The moment is assumed to be bounded in absolute value. We construct a feedback control law bringing the pendulum from the position in which both links hang vertically downwards into the unstable upper position in which both links are inverted. The same feedback ensures the asymptotic stability of the pendulum in the upper equilibrium position. Since the pendulum can be brought to the lower equilibrium position from any initial states, it follows that the constructed control law ensures the global stability of the inverted pendulum.     

Non-conservative stability of multi-step non-uniform columns

The non-conservative stability of non-uniform columns under the combined action of concentrated and variably distributed forces is solved analytically. Two types of follower force system are considered: (i) concentrated follower forces and variably distributed follower forces, (ii) concentrated follower forces and variably distributed conservative forces. The exact solutions for stability of four kinds of one-step non-uniform columns subjected to the two types of follower force system are derived for the first time. Then a new exact approach, which combines the exact solutions of one-step columns and the transfer matrix method, is presented for the non-conservative stability analysis of multi-step non-uniform columns. The advantage of the proposed method is that the resulting eigenvalue equation for a multi-step non-uniform column with any kinds of two end support configurations, an arbitrary number of spring supports and concentrated masses can be conveniently determined from a second order determinant. The decrease in the determinant order, as compared with previously developed procedures, leads to significant savings in the computational effort. A numerical example shows that the results obtained from the proposed method are in good agreement with those determined from the finite element method (FEM), but the proposed method takes less computational time than FEM.     

Coupled flutter and divergence bifurcation of a double pendulum

The loss of stability of the equilibrium position of a double pendulum with follower force loading and elastic end support is studied. At a special parameter combination the linearized system is characterized by a zero root and a pure imaginary pair of eigenvalues. Therefore, the stability problem is a complicated critical case in the sense of Liapunov and requires a non-linear analysis. A complete post-bifurcation investigation of the coupled divergence and flutter motions is given by means of centre manifold theory, and bifurcation diagrams. Among the different types of motions even the appearance of chaotic behavior is shown.     

Vibration energy harvesting for low frequency using auto-tuning parametric rolling pendulum under exogenous multi-frequency excitations

An electromagnetic parametrically excited rolling pendulum energy harvester with self-tuning mechanisms subject to multi-frequency excitation is proposed and investigated in this paper. The system consists of two uncoupled rolling pendulum. The resonance frequency of each the rolling pendulum can be automatically tuned by adjusting its geometric parameters to access parametric resonance. This harvester can be used to harvest the energy at low frequency. A prototype is developed and evaluated. Its mathematical model is derived. A cam with rolling follower mechanism is employed to generate multi-frequency excitation. An experimental study is conducted to validate the proposed concept. The experimental results are confirmed by the numerical results. The harvester is successfully tuned when the angular velocity of the cam is changed from 1.149 to 1.236 Hz.