糖的基质辅助激光解吸／电离质谱（MALDI—MS）研究

通过糖类化合物３种常用基质ＭＡＬＤＩ－ＭＳ分析效果的比较以及寡糖和多糖正，负离子ＭＡＬＤＩ－ＭＳ谱的对比，找到了适合糖分析的基础２，５－ＤＨＢ，探讨了糖类化合物激光解吸／电离条件下形成离子的过程，指出了Ｎａ＾＋，Ｋ＾＋离子在寡糖分子量测定的重要作用，借助柱层析分离手段，成功地测出分子量大于１００００的葡聚糖的分子量。     

长白山白眉蝮蛇蛇毒酶的基质辅助激光解吸质谱分析

用基质辅助激光解吸飞行时间质谱法对长白山眉蝮蛇蛇毒所含４种主要酶：磷脂酶Ａ２,精氨酸酯酶,纤溶酶及Ｌ－氨基酸氧化酶进行了纯度鉴定和分子量测定,结果表明ＭＡＬＤＩ－ＴＯ－ＦＭＸ具有灵敏度高,分辨能力强,分析时间短及样品用量少等优点。用ＭＡＬＤＩ－ＴＯＦＭＳ法分析蛇毒酶的纯度和分子量简捷,快速且重现性好,是ＳＤＳ聚丙烯酰胺凝胶电泳所无法比拟的。     

基质辅助激光解吸与离子化时间飞行质谱在高分子研究中的应用

对基质辅助激光解吸与离子化时间飞行质谱的发展历程和基本原理作了简要介绍,对这一分析技术在高分子研究中的应用进行了全面的综述和展望。本文表明,ＭＡＬＤＩ－ＴＯＦ－ＭＳ能快速准确地测定窄分布高分子的分子量,可测分子是一达１５０００００,所得平均分子量值及分子量分布指数与ＧＰＣ等常规方法相符;能用于高分子末端基的检测,从而推断聚合反应机理;也能用于共聚反应与共聚物结构的分析;另外,还能从分子量分布理到自     

3种羧酸类基质的基质辅助激光解吸／电离质谱行为

１引言基质辅助激光解吸／电离质谱（ＭＡＬＤＩ－ＭＳ）这种新的“软电离”质谱技术，能够在短短１０年间，得到广泛应用与迅速发展，很大程度上要归功于基质的辅助效应。基质在样品的解吸／电离过程中，起着关键作用。对基质本身ＭＡＬＤＩ－ＭＳ的研究，不仅可以、刻认识ＭＡＬＤＩ－ＭＳ中离子生成、碎裂的机制，在低分子量物质分析时更是必不可少。我们选择常用的３种羧酸类基质：２，５－二羟基苯甲酸（２，５－ＤＨＢ）、芥子酸（ＳＡ）、α－ＣＮ－４羟基肉桂酸（ＡＣＨＣ），进行了其自身ＭＡＬＤＩ－ＭＳ的研究。２实验部分２．１…     

MALDI－TOF－MS法分析人血清白蛋白

用基质辅助激光解吸附飞行时间质谱（ＭＡＬＤＩ－ＴＯＦ－ＭＳ）法分析测定了人血清白蛋白。结果表明，全军血液制品研究中心应用Ｒｉｖａｎｏｌ和Ｃｏｈｎ＇ｓ两种方法分离提取的人血清白蛋白，其分子量与理论计算值相吻合，其纯度与市售标准人血清白蛋白相一致，用ＭＡＬＤＩ－ＴＯＦ－ＭＳ法分析鉴定人血清白蛋白，准确、简便和灵敏（仅需ＰＭ浓度样品），且重复性好，日内和日间差的变异系数均小于０．０３％，是ＳＤＳ－ＰＡＧＥ电泳法所无法比拟的。     

低分子量溴代聚苯乙烯的制备及应用

用溶液法合成了一系列低分子量的聚苯乙烯，其溴化产物（Ｂｒ－ＰＳ）的溴含量和热稳定性与美国同类产品Ｐｙｒｏ－Ｃｈｅｋ ＬＭ相当，分别用作聚苯乙烯树脂的阻燃剂，极限氧指数测定结果表明，其阻燃性也达到了Ｐｙｒｏ－Ｃｈｅｋ ＬＭ的水平。     

双羧基封端聚己内酯的合成与表征

在氮气氛中和丁二酸存在下，进行了ε－己内酯的开环聚合。ＩＲ，￣１ＨＮＭＲ和￣（１３）ＣＮＭＲ测定结果表明，聚合反应产物为双羧基封端的聚ε－己内酯。产物的分子量随二元酸用量的减少而增加，在酸／内酯摩尔比为１：１４，２２５℃聚合３小时，产物的分子量达到最大值。     

分子量对酞侧基聚芳醚酮熔体流变行为的影响

用锥权流变仪及ＤＳＣ的方法研究了５种不同分子量的酞侧基聚芳醚酮（ＰＥＫ—Ｃ）在低剪切速率区（１０－２－１０ｓ－１）的流变行为及其分子量与玻璃化转变温度（Ｔｇ）的关系．结果表明，样品的粘流活化能随分子量的增加而增大，Ｔｇ随分子量的变化是二个线性区，其交点值与所求的样品的临界分子量（Ｍｃ）值相对应．利用测得的零剪切粘度值（η０）首次求得了ＰＥＫ—Ｃ的临界分子量（Ｍｃ）值．同时也讨论了Ｍｃ与温度及η０和Ｔｇ与分子量的关系．     

人参皂苷的基质辅助激光解吸质谱研究

利用MALDI-TOFMS测定了八种人参皂苷的分子量, 并分析了西洋参总皂苷的组成。同时, 进行了灵敏度实验, 并探讨了基质及碱金属离子的影响, 证明该方法灵敏度高, 重复性好, 结果准确。是测定极性小分子分子量的有效方法。     

基质辅助激光解吸电离飞行时间质谱研究（I）：林芳烃化合物

采用基质辅助激光解吸电离飞行时间质谱（ＭＡＬＤＩ－ＴＯＦ－ＭＳ）对杯芳烃化合物进行了分析。探讨了样品的制备条件、仪器操作参数等因素对测定结果的影响。２５种样品的质谱数据表明,利用ＭＡＬＤＩ－ＴＯＦ－ＭＳ可非常方便地得到灵敏度、分辨率、准确度均较高,且易于识别和解析的质谱图,为此类化合物的质谱表征提供和建立了一种新的高效分析方法。     

气相渗透法中的溶质吸附效应

在气相渗透仪上，用四个低分子量有机化合物和五个已知平均分子量的窄分布聚苯乙烯低聚体，对ＶＰＯ方法中的溶质吸附效应作了研究，提出了一种对吸附效应作改正的方法．所得结果表明，在扣除溶质吸附效应后，仪器常数Ｋ无分子量依赖性，提高了测定低分子量聚合物数均分子量的准确性．     

茂基二价钐配合物高效催化己内酯开环聚合

研究了二茂基二价钐配合物(C5H5)2Sm(THF)作为单组分催化剂催化己内脂开环聚合反应,考察了催化剂用量、聚合反应时间、聚合反应温度对己内酯聚合反应的影响。结果表明,配合物(C5H5)2Sm(THF)对己内酯聚合有极高的催化活性且产物的数均分子量较高,当催化剂与单体摩尔比为1：5000时,聚合产率仍可达50.3%,数均分子量可高达32.4万;温度升高,聚合反应的转化率增加,聚合产物数均分子量降低;催化剂用量增加,聚合转化率增加,聚合产物分子量降低;聚合产物的分子量分布较窄;通过凝胶色谱法对聚合产物的分子量及分子量分布进行了表征。     

甲基丙烯酸甲酯聚合动力学和分子量及分布的开放控制

在甲基丙烯酸甲酯聚合过程中 ,凝胶效应会导致转化率在短时间内出现突变 ,这对工业反应器非常危险 ,同时也导致分子量剧增、分子量分布加宽 .为了使聚合反应速度、分子量及分布同时得到控制 ,提出 3个控制目标 ,即热荷分布指数、预定分子量及变化、分子量分布指数 .在甲基丙烯酸甲酯半间歇聚合动力学和分子量模型的基础上 ,通过单体、溶剂和链转移剂 3种物料的流量和加料方式的仿真计算 ,对动力学、分子量及分布进行开放控制 ,并进行优化 ,得到热荷分布指数和分子量分布指数分别小于 2 0和 2 2的控制策略 ,且分子量达到预定要求 .选择两种优化策略进行实验验证 ,结果与开放控制仿真结果一致     

Tailoring MWD of Bimodal Polyethylene in the Presence of Ziegler-Natta Catalyst

Summary: Linear poly (ethylene-co-1-butene) was produced through two-step polymerization in one reactor using a Ziegler-Natta catalyst, where in the first step, low molecular weight homopolymer of ethylene in the presence of hydrogen and in the next step, high molecular weight copolymer of ethylene with 1-butene in the absence of hydrogen were produced. Molecular weight distribution of bimodal polyethylene was tailored through adjustment of polymerization time of each stage and hydrogen concentration of the first stage. Increasing hydrogen concentration shifted the molecular weight distribution curve to the lower molecular weights and broadened molecular weight distribution while interestingly increased high molecular weight incorporation of copolymer produced in the second stage due to increasing of reaction rate in the second step. To achieve bimodal molecular weight distribution, the polymerization times of the first and the second steps, which are highly dependent on the amount of hydrogen, were adjusted properly. The effects of the mentioned parameters on the processability as well as rheological properties of some samples were investigated. The rheological results showed shear thinning behavior of all specimens and confirmed the changes in molecular weight and molecular weight distribution. It was also demonstrated that the melt miscibility between low molecular weight and high molecular weight fractions improved with increasing of chains having very low molecular weight.     

Molecular weight distribution of poly-N-vinylcarbazole obtained in catalytic solid-state polymerization

The molecular weight distribution of poly-N-vinylcarbazole (PVCar) obtained in solid-state polymerization with various catalysts or γ-rays was measured by gel-permeation chromatography, in order to determine the mechanism of the solid-state polymerization. In addition, the molecular weight distribution of PVCar obtained in the solution polymerization by the cationic catalyst was also measured. The molecular weight distribution of PVCar obtained in the catalytic solid-state polymerization was broad and had three peaks, independent of the nature of catalysts, radical and cationic. A large amount of low molecular weight oligomer (probably dimer or trimer) was formed in the catalytic solid-state polymerization of VCar. The molecular weight distribution of PVCar obtained in the cationic solution polymerization showed only one sharp peak. On the other hand, the molecular weight of PVCar obtained in the radiation-induced solid-state polymerization was larger than that obtained in the catalytic solid-state polymerization, and dimer or trimer was not formed. The molecular weight distribution of PVCar obtained was composed of one sharp peak in the high molecular weight region, and a broad peak in the low molecular weight region, and was extremely different from that of PVCar obtained in the catalytic solid-state polymerization.     

Recoverable compliance of a series of bimodal molecular weight blends of polystyrene

A series of bimodal molecular weight polystyrene blends was prepared. One component had a molecular weight greater than M_c and one less. The recoverable compliances were measured, and the retardation spectra determined via direct inversion. The retardation spectra of the blends are interpreted on the basis of the behavior of the spectra of the components, as a function of composition. It was observed that the low molecular weight component acted as a solvent. The effect of blending on the high molecular weight spectrum was to shift the position of the first peak to longer times and that of the second peak to shorter times. The peak separation was found to be proportional to the 3.4 power of the product of the molecular weight and the volume fraction of the high molecular weight component.     

气相渗透法测定数均分子量的仪器常数问题研究

用4个低分子量有机化合物和6个窄分布聚苯乙烯标样研究了VPO法中仪器常数K的分子量依赖性问题.实验结果表明,由于VPO法中存在溶质吸附效应,K具有分子量依赖性,并随分子量的增加而增大;当扣除在实验中产生的溶质分子吸附效应后,K无分子量依赖性.     

壳聚糖超声可控降解及降解动力学研究

通过正交实验法考察了壳聚糖溶液浓度、反应温度、超声强度以及醋酸溶液浓度对超声降解反应的影响,确定了最佳反应条件,制备了一系列不同分子量的壳聚糖.研究了壳聚糖溶液浓度、反应温度以及壳聚糖原料分子参数与降解速率常数的关系.通过红外光谱、X-射线衍射和凝胶渗透色谱对降解产物进行了表征.结果表明,超声降解壳聚糖的最佳条件为10℃,壳聚糖溶液浓度2.5g/L.降解速率常数随壳聚糖溶液浓度和反应温度的降低而增大.高分子量和低脱乙酰度的壳聚糖原料有较高的降解速率和降解速率常数,壳聚糖原料的分子量对降解速率和降解速率常数的影响大于脱乙酰度对其的影响.超声波导致了壳聚糖分子量的降低和产物晶体结构的破坏,但没有改变产物的脱乙酰度和糖残基结构.     

Nuclear magnetic resonance study of low molecular weight polychlorotrifluoroethylene

The molecular motion of low molecular weight polychlorotrifluroethylene of different molecular weights between 500 and 1300 was investigated by means of broad-line nuclear magnetic resonance measurements. The line width and second moment of the resonant absorption lines were obtained at temperatures from 77 to 300°K. The line narrowing for low molecular weight samples takes place in one step. In samples higher than 900 in molecular weight, however, there appears to be a glass transition process, and the line narrowing tends to occur in three steps. The line narrowing due to local molecular motion becomes observable with increasing molecular weight.     

Gel permeation chromatographic characterization of sodium hyaluronate and its fractions prepared by ultrasonic degradation

Summary High-molecular-weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. The molecular weight of hyaluronate and its polydispersity was determined by gel-permeation chromatography. During 75-min treatment the molecular weight value decreased from 1.39×10⁶ Da to 2.25×10⁵ Da while the polydispersity of the molecular weight increased from 1.29 to 2.36. The reciprocal value of the square of the hyaluronate's molecular weight was linearly proportional to the time of ultrasonication.