Thermal,XRD, and magnetization studies on ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiAl<Subscript>2</Subscript>O<Subscript>4</Subscript> spinels,synthesized by citrate precursor method and annealed at 450 and 650 °C

Two aluminate spinel materials (ZnAl₂O₄ and NiAl₂O₄) were synthesized by the citrate precursor method. The citrate precursors consisting of coprecipitated citrates of Zn²⁺ or Ni²⁺ and aluminum were first subjected to thermal analysis (TG-DSC) for determining the optimum temperature for annealing. Two step decomposition was observed incorporating dehydration and formation of the aluminate. The second step gives an endo peak (−2937 J/g) at 356 °C in the DSC curve of the coprecipitated nickel(II) citrate–aluminum citrate gel in O₂ atmosphere. Kinetic/mechanistic analysis of the TG data has also been carried out and values of E _a, ΔS ^#, ΔG ^#, and A were approximated. On the basis of the findings, 450 °C has been chosen for annealing of the gels. Annealing has also been done at 650 °C for 1 h in muffle furnace in an attempt to obtain nanometric particles of aluminates (MAl₂O₄) {M = Ni, Zn} and to find out their magnetic properties which could render them useful for chemical sensing applications, etc. The TG-DSC curves of various powders which were obtained on annealing at the two temperatures did exhibit thermal instability when carried out in N₂ atmosphere. NiAl₂O₄ and ZnAl₂O₄ spinels (particle size 17 and 34 nm, respectively) are obtained in pure crystalline phase at 650 °C. ZnAl₂O₄ prepared this way shows coercivity values of 470 and 58.37 G and NiAl₂O₄, 107 and 23.24 G when annealed at 450 and 650 °C, respectively. ZnAl₂O₄ prepared by a polymer precursor method and annealed at 1000 °C, has earlier been reported to have coercivity value of 469 G. Thus, the citrate precursor method is good for the synthesis of ZnAl₂O₄, producing single phase nanocrystalline powder of high quality and crystallinity. The value of magnetization was found to be small in the present case for the NiAl₂O₄ spinel obtained at 450 °C.     

Primary photophysical and photochemical processes upon UV excitation of PtBr<Subscript>6</Subscript><Superscript>2–</Superscript> and PtCl<Subscript>6</Subscript><Superscript>2–</Superscript> complexes in water and methanol

Primary photophysical and photochemical processes were studied for Pt^IVBr₆ ^2– and Pt^IVCl₆ ^2– complexes in water and methanol by ultrafast kinetic spectroscopy upon excitation in the band region of charge transfer from the ligand-centered group π-orbitals to the e_g*-orbital of Pt^IV complex anion (LMCT bands). The data obtained earlier upon excitation in the region of d—d bands were compared. Irrespective of the excitation wavelength, the photochemical properties of complexes are caused by the reactions of intermediates proceeding in the picosecond time range. These intermediates were identified as Pt^IVBr₅ ^– upon photolysis of Pt^IVBr₆ ^2– and, presumably, the Adamson radical pair [Pt^IIICl₅ ^2–(C _4v )...Cl?] upon photolysis of Pt^IVCl₆ ^2–. The difference in the exciting light wavelengths has an impact only on the first step of these processes, i.e., transition from the Franck—Condon excited state to intermediates.     

Microwave-assisted hydrothermal synthesis and electrochemical studies of α- and h-MoO<Subscript>3</Subscript>

Two modifications of molybdenum trioxide with orthorhombic (α-MoO₃) and hexagonal (h-MoO₃) crystal structure have been synthesized by a microwave-assisted hydrothermal method, facilitated by formic acid. Characterization by means of X-ray diffraction, scanning electron microscopy, specific surface analysis, and Fourier-transform infrared, Raman, and UV-Vis spectroscopy reveals phase-pure crystalline powder samples of hexagonal h-MoO₃ microrods and of α-MoO₃ nanobelt bundles, respectively. The electrochemical properties of the MoO₃ compounds, studied by cyclic voltammetry and galvanostatic cycling vs. Li/Li⁺, strongly depend on the structure and the applied potential range. In the range of 1.5–3.5 V, Li⁺-ions can be reversibly intercalated into the α-MoO₃ nanobelts. Utilizing the material in this way as intercalation cathode material yields an initial discharge capacity of 295 mA h g^?1 at 100 mA g^?1 and comparably moderate capacity fading of 25% between cycles 20 and 100. Extending the potential range to 0.01–3.0 V induces the conversion reaction to Mo, which for both modifications yields high initial capacities of around 1500 mA h g^?1 but is associated with much stronger capacity fading.     

High performance liquid chromatographic separation of <Superscript>228,229</Superscript>Th and <Superscript>232,233</Superscript>U and their estimation by α- and γ-ray spectrometry

The activities of ^228,229Th and ^232,233U from an irradiated ThO₂ sample were radiochemicaly separated by using high performance liquid chromatography. Plancheted sources of the separated samples were made and the amount of ^232,233U and ^228,229Th were estimated by using alpha and gamma-ray spectrometric techniques. These estimations are important for the Th–U fuel reprocessing cycle of advanced heavy water reactor and accelerator driven sub-critical system.     

Sol–gel synthesis and characterization of polycrystalline GdFeO<Subscript>3</Subscript> and Gd<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> thin films

Thin films of the perovskite and garnet structured gadolinium ferrites GdFeO₃ and Gd₃Fe₅O₁₂ have been synthesized by a sol–gel method, based on stoichiometric mixtures of acetyl acetone chelated Gd³⁺ and Fe³⁺ dissolved in 2-methoxy ethanol. After spin coating onto Si wafers, and heating in air at 700 °C for 20 h, neatly grown essentially single phase films were obtained. From X-ray photoelectron spectroscopy an iron deficiency is observed in the uppermost layer of both films, implying that the crystallites preferably end in planes rich in Gd and O but not in Fe. The films were also characterized by X-ray powder diffraction, scanning electron microscopy, infrared spectroscopy, and magnetic measurements.     

Luminescence and long-lasting afterglow in Mn<Superscript>2+</Superscript> and Eu<Superscript>3+</Superscript> co-doped ZnO–GeO<Subscript>2</Subscript> glasses and glass ceramics prepared by sol–gel method

To develop new fluorescent and afterglow materials, Mn²⁺ and Eu³⁺ co-doped ZnO–GeO₂ glasses and glass ceramics were prepared by a sol–gel method and their optical properties were investigated by measuring luminescence, excitation and afterglow spectra, and luminescence quantum yield (QY). Under UV irradiation at 254 nm, some glasses and all of the glass ceramics showed green luminescence peaking at 534 nm due to the ⁴T₁ → ⁶A₁ transition of tetrahedrally coordinated Mn²⁺ ions. The strongest luminescence was observed in a glass ceramic of 0.1MnO–0.3Eu₂O₃–25ZnO–75GeO₂ heat treated at 900 °C, with QY of 49.8%. All of the green-luminescent glasses and glass ceramics showed green afterglow, and the afterglow lasting for more than 60 min was obtained in a glass ceramic heat treated at 900 °C. It is considered that the Eu³⁺ ions may behave as electron trapping centers to be associated with the occurrence of the green afterglow due to the Mn²⁺ ions in the co-doped system.     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.     

Nitroanandamide,nitroprostamides E<Subscript>2</Subscript> and F<Subscript>2<Emphasis Type="Italic">α</Emphasis></Subscript>, and their analogs

Synthetic methods were developed for nitrates of the natural bioactive lipids anandamide and prostamides E₂ and F_2α in addition to their analogs that contained nitrates of ethanolamine and 3-amino-1,2-propanediol as the NO-generating fragment.     

Composition and Homogeneity of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>〈В〉 Solid Precursors and LiNbO<Subscript>3</Subscript>〈В〉 Batches

Nb₂O₅〈В〉 solid precursors and LiNbO₃〈В〉 batches prepared on their basis, which can be used for preparing optical-quality lithium niobate single crystals and pore-free piezoelectric ceramics, have been studied by laser ablation inductively coupled mass spectrometry (LA-ICP-MS). The compositions of powdery samples pelletized without binder have been determined. The calculated mean-square deviations Sr of laser ablation ICP-MS have been used to show a homogeneous distribution of the boron dopant over Nb₂O₅〈В〉 precursors and LiNbO₃〈В〉 batches.     

Hyperconjugation versus back bonding in AH3−nXn species (A = Si and Ge; X = F,Cl and Br; and n = 1, 2 and 3)

In this research two competing phenomena, back bonding and hyperconjugation, have been investigated based on Natural Bond Orbital (NBO) and Atoms in Molecules (AIM) analyses for radical AH_3?nX_n species, where A = Si and Ge, and n = 1, 2 and 3. It is demonstrated in this article that both above phenomena will be occurred significantly, while back bonding is the only event in analogous compounds with carbon and hyperconjugation is rather negligible. It was also found that only one back bonding with the help of keyword $CHOOSE in NBO analysis can be found in this type of compounds with reasonable structure, while it can be sometimes detected in AH_3?nX_n without using keyword $CHOOSE. It is also shown that there is always an increase in bond length in comparison with reference molecules in mentioned species due to existing hyperconjugation, while if the central atom is carbon, we have always a decrease of bond length due to only having back bonding. Additionally, from AIM point of view, the delocalization indices for α-spin (majority spin) is more than β-spin (minority spin) in radical species for molecules without back bonding, while the situation in our compounds is quite reverse, which can be attributed to the π back bonding in the β-spin electrons.     

Structure and magnetic properties of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> ferrites synthesized by sol–gel and microwave calcination

CoFe₂O₄ ferrites were synthesized sol–gel with cobalt chloride, ferric chloride and citric acid as the main raw material. X-ray diffraction, vibrating sample magnetometer and simultaneous thermal analysis were applied to character the structure and magnetic properties of traditional and microwave calcined samples. The samples with pH 5 and molar ratio of citric acid to metal nitrate 1–1.2 showed the optimal structure and magnetic properties. Microwave calcination reduces the synthesis time from 2 h for conventional calcination to 15–30 min. The saturation magnetization (σ _s ) for sample microwave-calcined at 550 °C for 30 min reaches to 75.89 emu/g, much higher than that of conventional-calcined samples.     

Molecular geometries,electronic properties,and vibrational spectroscopic studies of endohedral metallofullerenes TM@C<Subscript>24</Subscript> and TM@C<Subscript>24</Subscript>H<Subscript>12</Subscript> (TM = Cr,Mo, and W)

Molecular geometries, electronic properties, and vibrational spectroscopies of TM@C₂₄ and TM@C₂₄H₁₂ (TM = Cr, Mo, and W) in their different spin configurations have been systematically investigated with the hybrid DFT-(U)B3PW91 functional. The results show that the TM atoms bind over the pentagon ring inside C₂₄ cage, and they move gradually toward the center of C₂₄ cage along with the increasing atomic radii. The most stable Mo@C₂₄H₁₂ and W@C₂₄H₁₂ are in their spin-triplet states. The analyses of dissociation energy and energy gap reveal that TM@C₂₄ (TM = Cr, Mo, and W) and Cr@C₂₄H₁₂ are not only thermodynamically stable, but also considerably stable kinetically. Meanwhile, natural population analyses tell us that the two cages act as electron acceptors, and the transferred charge from the W atom to C₂₄ cage is the largest in the endohedral metallofullerenes. Additionally, the vibrational frequencies and active infrared intensities may be used as evidence to characterize these unknown species.     

Synthesis,crystal structures and luminescent properties of phenylmercury(II) complexes with thiohydrazone ligands having weak Hg····π and Hg····Hg interactions

The Reaction of phenylmercury(II) acetate with salicylaldehyde morpholine N-thiohydrazone (H₂smth) and 2-hydroxyacetophenone morpholine N-thiohydrazone (H₂apmth) in dry ethanol under gentle refluxing condition form light yellow complexes [PhHg(Hsmth)] (1) and [PhHg(Hapmth)] (2) involving formation of Hg-S bond from the thiol form of the ligands after deprotonation of the SH proton. The structures of the complexes as determined by X-ray crystallography shows that the complex (1) has a distorted T-shaped geometry while the complex (2) adopts familiar linear coordination geometry. Complex (2) has two independent molecules comprising the asymmetric unit. Both the complexes form two-dimensional supramolecular assemblies due to a combination of weak intermolecular Hg····π and Hg····Hg interactions. The Hg····π and Hg····Hg distances are 3.937 and 4.0216(10) Å, respectively, possibly indicating weak mercuriophilic interactions. The luminescent properties of the complexes in solution and in the solid state at room temperature are also described.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Synthesis of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>〈B〉 solid precursors and LiNbO<Subscript>3</Subscript>〈B〉 batches and their phase compositions

A process has been developed for preparing boron-doped niobium pentoxides Nb₂O₅〈B〉 to be used as precursors in the sysnthesis of nithium biobate batches LiNbO₃〈B〉 having tailored dopant concentrations. Solutions of various origins were used to isolate Nb₂O₅〈B〉. A method has been advanced to account for boron loss as volatile compounds upon the heat treatment of niobium hydroxide in order to determine the boron amount to be added to niobium hydroxide in the form of H₃BO₃. The boron concentration in LiNbO₃〈B〉 during lithium niobate synthesis is shown to be independent of the origin of the Nb₂O₅〈B〉 precursor with the same as-batch boron concentration. The phase compositions of Nb₂O₅〈B〉 and LiNbO₃〈B〉 have been characterized by X-ray powder diffraction and IR spectroscopy and boron concentrations have been determined for the synthesis of single-phase lithium niobate batches for use in the production of optically uniform single crystals and pore-free piezoelectric ceramics.     

Particulate sol–gel synthesis and optical and electrical properties of CeO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanocomposite

CeO₂/TiO₂ nanocomposite was synthesized by particulate sol–gel method. The X-ray diffractogram shows the presence of cubic CeO₂ and anatase TiO₂ in the composite. The high resolution scanning electron micrographs reveal the nanoparticulate nature of the prepared composite. The composite absorbs UV light and exhibits near-band gap emission corresponding to TiO₂ and deep level emission due to crystal defects. The Nyquist plot displays two semicircular arcs indicating the material heterogeneity. The physicochemical characteristics of the synthesized nanocomposite are in favour of its application as an ingredient of sunscreen formulations; under UV light the photocatalytic activity of CeO₂/TiO₂ composite, tested through the degradation of rhodamine B, is very much less than that by pristine anatase TiO₂. Reduced adsorption of moisture by the nanocomposite is a possible reason for the observed very low photocatalytic activity.     

Liquid-phase synthesis and physicochemical properties of xerogels,nanopowders and thin films of the CeO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Low-agglomerated xerogels, ultrafine oxide powders with particle sizes of 12–20 nm, and uniform thin films with particle sizes of 8–14 nm are prepared in the CeO₂–Y₂O₃ system using liquid-phase low-temperature methods, namely via coprecipitation of hydroxides and cocrystallization of salts, sol—gel technology. A comparative characterization of the prepared xerogels and nanopowders is performed using a set of physicochemical analytical methods. A dependence of phase composition, microstructure, and particle size on synthetic parameters is elucidated.     

Nucleophilic Reactivity of Hydroxide and Hydroperoxide Ions in Aqueous-Alcoholic Media and of HCO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ion in Water

Nucleophilic reactivity of hydroxide and hydroperoxide ions toward ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, 4-nitrophenyl 4-toluenesulfonate, and 4-nitrophenyl dimethylcarbamate in the system H₂O₂-KOH was studied in aqueous-alcoholic solutions at 25°C. The rate of reactions of both anions with ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, and 4-nitrophenyl dimethylcarbamate and of hydroxide ion with 4-nitrophenyl 4-toluenesulfonate increases with rise in the fraction of the alcohol in mixtures of water with isopropyl and tert-butyl alcohols, while the reaction rate of hydroperoxide ion with 4-nitrophenyl 4-toluenesulfonate decreases. The rate of reactions of both anions with all the above substrates in mixtures of water with ethylene glycol decreases as the fraction of the latter rises. The apparent rate of the reaction of ethyl 4-nitrophenyl ethylphosphonate with anionic nucleophiles in the system H₂O₂-HO^?-HCO ₃ ^? in water at pH 8.5 almost does not depend on the concentration of ammonium hydrogen carbonate up to a value of 1 M, and it increases when the NH₄HCO₃ concentration exceeds 1 M. Mixtures of water with the lower monohydric alcohols were recommended for use as components of H₂O₂-HO^?-HCO ₃ ^? systems for oxidative decomposition of ecotoxicants.     

Structure and biologicalactivity of demethyleneldelidine and its dihydro-<Emphasis Type="Italic">γ</Emphasis>-lactone

An excess of periodic acid was reacted with the diterpenoid alkaloid demethyleneldelidine (1) to produce a γ-lactone (2) in which the carbonyl at the C6-position was selectively reduced by an excess of NaBH₄. The conformation of the rings, configuration of asymmetric and spiro centers, and the nature of intramolecular H-bonds in the diterpenoid alkaloid demethyleneldelidine and its reduction product 3 were analyzed by an x-ray structure analysis. The spiro center at C10 in 3 had the S-configuration. The other asymmetric centers retained the absolute configuration characteristic of alkaloids with the lycoctonine carbon skeleton. The pharmacological properties did not change significantly despite the large difference in the carbon skeletons of γ-lactone 3 and starting 1.     

Quantum Chemical Study of Niobium and Tantalum M<Subscript>4</Subscript>O<Subscript>10</Subscript> Oxide Clusters and M<Subscript>4</Subscript>O<Stack><Subscript>10</Subscript><Superscript>–</Superscript></Stack> Anions

Structural parameters and vibrational frequencies of the clusters (T_d)–Nb₄O₁₀, (C_3v)-TaNb₃O₁₀, (D_2d)-Nb₄O ₁₀ ^– , and (C_s)-TaNb₃O ₁₀ ^– were calculated. According to the (U)DFT/SDD calculations with BLYP, B3LYP, and PBE0 functionals magnetization of the anion (D_2d)-Nb₄O ₁₀ ^– is distributed equally among four niobium atoms. In the anion (C_s)-TaNb₃O ₁₀ ^– unpaired electron presumably occupies niobium atoms. The distinction in contributions from Nb atoms in the magnetization of the tantalum-containing cluster grows with the exchange component of the DFT functional in the series of functionals BLYP < B3LYP < PBE0 < UHF.