Hydrocarboxylation of terminal alkenes in supercritical carbon dioxide using perfluorinated surfactants

High selectivity in acids is obtained in the first example of hydrocarboxylation of 1-octene in supercritical carbon dioxide using a Pd/P(4-C6H4-CF3)3 catalyst system and a perfluorinated surfactant.     

Synthesis of fluorinated oligomers for supercritical carbon dioxide applications

Syntheses of various fluorine‐based surfactants, namely fluorinated‐segment‐containing block co‐oligomers, were achieved by the radical polymerization of mainly acrylate‐based monomers. These types of surfactants serve as stabilizers for supercritical carbon dioxide (scCO₂) media based applications, for which the effective solubilization of materials in the supercritical phase is generally not possible because of solubility problems faced when CO₂ is involved. Initially, a difunctional fluorinated initiator was synthesized in two steps. First, 4,4′‐azobis‐4‐cyanovaleric acid was chlorinated with SOCl₂, and then the product, 4,4′‐azobis‐4‐cyanovaleryl chloride, was reacted with a fluorinated alcohol to obtain the initiator for the polymerization reactions. The synthesized triblock co‐oligomers consisted of fluorinated side blocks and a hydrocarbon intermediate block. Efficient solubilization of the materials in scCO₂ was observed. It was experimentally shown that the solubility efficiency was affected by specific interactions between CO₂ and the oligomers, and these were determined by the nature and size of the inner block and by the chain length of the fluorinated side blocks in comparison with the inner block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5312–5322, 2005     

Properties of fractions of ultradisperse polytetrafluoroethylene soluble in supercritical carbon dioxide

The morphology and structure of FORUM ultradisperse polytetrafluoroethylene fractions obtained via separation of the initial sample with supercritical carbon dioxide are studied by means of scanning and transmission electron microscopy, thermogravimetric and X-ray structural analysis, and IR and NMR spectroscopy. The lowest molecular mass fractions of the ultradisperse polytetrafluoroethylene are involved in the dissolution process, while an increase in production parameters (pressure and temperature) entails gradual involvement of higher molecular mass oligomers in this process. On the basis of the experimental data, the chain length of oligomers soluble in supercritical carbon dioxide is estimated.     

Synthesis of cross-linked polymer microspheres in supercritical carbon dioxide

Herein we report the synthesis of highly cross-linked polymers based on divinylbenzene by heterogeneous polymerization in supercritical CO₂ (scCO₂). The polymers were isolated in the form of discrete microspheres (diameter = 1.5–5 μm) in good yields (≥90%), in the absence of any stabilizers. In the presence of a CO₂-soluble polymeric stabilizer, much smaller particles (diameter <0.5 μm) were formed in high yields (≥95%) by emulsion polymerization in scCO₂.     

Synthesis of dimethyl carbonate from methanol and supercritical carbon dioxide

The synthesis of dimethyl carbonate (DMC) from methanol and supercritical carbon dioxide over various base catalysts has been studied. Compounds of group-I elements (Li, Na and K) were used as base catalysts. The promoter and the dehydrating agent were also used to enhance the yield of DMC. The effects of the catalysts, promoter and dehydrating agent on the yield of DMC were investigated. By-products such as dimethyl ether (DME) and C₁–C₂ hydrocarbons were formed with the DMC as a main product. The yield of DMC with different alkali metal catalysts ranked in the following order: K > Na > Li. The catalysts of the metal-CO₃ compounds were more effective than the metal-OH compounds in DMC synthesis. The maximum DMC yield reached up to about 12 mol% in the presence of K₂CO₃ (catalyst), CH₃I (promoter) and 2,2-dimethoxypropane (dehydrating agent) at 130–140°C and 200 bar. The reaction mechanism of DMC synthesis from methanol and supercritical carbon dioxide was proposed.     

Organosilicon compounds in supercritical carbon dioxide: Synthesis,polymerization, modification,and production of new materials

The main promising opportunities for the advantageous combination of organosilicon compounds and supercritical carbon dioxide both as a solvent and as a reagent in chemical processes are analyzed. The main processes of polymerization and modification of polymer matrices that are performed in supercritical СО₂ with the use of organosilicon materials of various types are outlined. Methods for the obtaining organosilicon polymers and polymer-inorganic composites and methods for the application of siloxane stabilizers in the dispersion polymerization of monomers in supercritical СО₂ are described. Studies of the insertion of a СО₂ molecule into Si–H, Si–N, and Si–O–Me bonds in reactions that feature exceptionally high chemical selectivity and afford a wide spectrum of products potentially useful for application in the chemistry of polymer materials are considered. It is shown that the silylation of surfaces of various types and morphologies in the medium of supercritical СО₂ is a rapidly developing green approach that makes it possible to obtain highly uniform defect-free coatings with variable desired functionality.     

在超临界CO2流体中的化学反应

超临界CO2流体中的化学反应是继超临界流体应用于萃取分离过程之后进一步将其应用于化学反应的新尝试。本文重点综述了超临界CO2流体中的化学反应研究进展, 并对其发展前景作了展望。     

Synthesis of isoamyl laurate and isoamyl stearate in supercritical carbon dioxide

The synthesis of isoamyl laurate and isoamyl stearate was studied in supercritical carbon dioxide with three lipases, Novozym 435, Lipolase 100T, and Candida rugosa. The maximum conversion of 37% and 53%, respectively for isoamyl laurate and isoamyl stearate was obtained when Novozym 435 was used. The effect of various parameters such as molar ratio of alcohol to acid, presence of water, time and temperature was investigated. An optimum temperature of 40–45°C was observed for all reactions. The kinetics of reactions was fast and equilibrium was achieved in 2–3 h. Although the presence of excess alcohol did not reduce conversion, excess water reduced conversion significantly.     

Synthesis of poly(arylate-siloxane)s in supercritical carbon dioxide

The reaction between poly(4,4′-isopropylidene-2,2′-diphenylene (tere)isophthalate) copolymer and 3-aminopropyltriethoxysilane was investigated in supercritical carbon dioxide at 150 atm and 100° C. It was found that ester bonds in the copolyarylate undergo aminolysis under the above conditions to give rise to the formation of siloxane-containing amides, whose interaction with phenol groups of the macromolecules and moisture affords an insoluble poly(arylate-co-siloxane) fraction. Under the action of moisture, three-dimensional structures containing polyarylate and polysiloxane fragments are formed in the soluble fraction of the copolymer via the combined hydrolysis of ethoxysilane groups. The formation of the siloxane network affects the properties of the polymers. In particular, thermomechanical and thermal tests showed that sample deformation at 250°C decreases from 80 to 15%, while the carbon residue at 725°C increases twofold as compared to that of an initial polyarylate sample.     

Synthesis of biocompatible and biodegradable polymer particles in supercritical carbon dioxide

The free radical copolymerization of N-vinyl-2-pyrrolidone and 2-methylene-1,3-dioxepane was carried out in supercritical carbon dioxide (scCO₂) using three kinds of dispersants and 2,2′-azobisisobutyronitrile as the initiator. Polymerization was performed with fluorinated polymeric dispersants synthesized in scCO₂ using the solution polymerization method and commercially available siloxane-based surfactant. Spherical biocompatible and biodegradable polymeric particles were prepared within the sub-micron size range. The effect of various ratios of the comonomer, reaction temperature, and concentration of initiator, in addition to the types and concentrations of the dispersants, on the particle size and morphology was investigated. The particle size and particle size distribution of copolymer particles were controlled using the above mentioned experimental parameters. Glass transition temperatures of copolymers were varied according to the comonomer ratios used.     

Synthesis of polyhedral particles by dispersion polymerization in supercritical carbon dioxide

The novel synthesis of polyhedral particles was attained by the dispersion polymerization of styrene in supercritical carbon dioxide using a polydimethylsiloxane-based macroazoinitiator as a precursor of the surfactant. The macroazoinitiator, VPS-1001, composed of poly(dimethylsiloxane) and 6-8 molecules of the azo groups served as a precursor of the surfactant for the dispersion polymerization by azobisisobutylonitrile as an initiator to produce 0.8-4 μm polyhedral particles. The size of the particles decreased as a result of increasing the VPS-1001 concentration. Too high a concentration of VPS-1001 caused coagulation of the particles. A decrease in the temperature increased the particle size and size distribution, while a decrease in the pressure produced particles with nonspecific shapes. An increase in the stirring rotation speed tended to increase the size and size distribution. However, too high a speed of rotation also caused coagulation of the particles.     

Dissolution of uranium dioxide in supercritical fluid carbon dioxide

Uranium dioxide can be dissolved in supercritical CO2 with a CO2-philic TBP-HNO3 complexant to form a highly soluble UO2(NO3)(2).2TBP complex; this new method of dissolving UO2 that requires no water or organic solvent may have important applications for reprocessing of spent nuclear fuels and for treatment of nuclear wastes.     

Synthesis of polyvinylpyrrolidone and its nanosilver-based polymer composites in supercritical carbon dioxide

Polyvinylpyrrolidone is synthesized in supercritical carbon dioxide at a pressure of 20 MPa and a temperature of 65°C. Polyvinylpyrrolidone films are impregnated with the organic complex silver 1,5-(cyclooctadiene)-1,1,1,5,5,5-hexafluoroacetyl acetonate, and the metal is subsequently reduced by hydrogen. The chemical structure and structure of nanometallopolymer composites are investigated by SAXS, transmission electron microscopy, FTIR and UV spectroscopy, and X-ray fluorescent analysis. It is shown that the impregnation with the complex and the reduction of the complex give rise to Ag(0) nanoparticles with a predominant size on the order of 1 nm.     

Synthesis of gold nanoparticles from an organometallic compound in supercritical carbon dioxide

This article presents the synthesis of gold nanoparticles in a single-phase supercritical fluid carbon dioxide solvent. The gold nanoparticles were formed by the reduction of triphenylphosphine gold(I) perfluorooctanoate with dimethylamineborane. Transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis spectroscopy reveal the formation of gold nanoparticles of 1 nm in diameter. A high dispersion stability of the gold nanoparticles in supercritical carbon dioxide can be obtained by binding both triphenylphosphine and fluorocarbon ligands on the surface of the gold nanoparticles.     

超临界二氧化碳介质中有机化学反应研究

综述了本研究小组近年来在超临界二氧化碳介质中过渡金属催化的有机化学反应的研究结果,主要包括烯烃和炔烃的羰基化反应、氧化反应、自由基反应、低聚反应。     

Monoacetylferrocene crystallization in supercritical carbon dioxide

An organometallic compound, monoacetylferrocene, was for the first time obtained as single crystals by crystallization from supercritical carbon dioxide. This offers the possibility of utilizing supercritical media for efficient crystallization and purification of organometallic compounds without using organic solvents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 555–557, March, 2006.     

Olefin metathesis in supercritical carbon dioxide

Liquid or supercritical carbon dioxide (scCO(2)) is a versatile reaction medium for ring-opening metathesis polymerization (ROMP) and ring-closing olefin metathesis (RCM) reactions using well-defined metal catalysts. The molybdenum alkylidene complex 1 and ruthenium carbenes 2 and 3 bearing PCy(3) or N-heterocyclic carbene ligands, respectively, can be used and are found to exhibit efficiency similar to that in chlorinated organic solvents. While compound 1 is readily soluble in scCO(2), complexes 2 and 3 behave like heterogeneous catalysts in this reaction medium. Importantly, however, the unique properties of scCO(2) provide significant advantages beyond simple solvent replacement. This pertains to highly convenient workup procedures both for polymeric and low molecular weight products, to catalyst immobilization, to reaction tuning by density control (RCM versus acyclic diene metathesis polymerization), and to applications of scCO(2) as a protective medium for basic amine functions. The latter phenomenon is explained by the reversible formation of the corresponding carbamic acid as evidenced by (1)H NMR data obtained in compressed CO(2). Together with its environmentally and toxicologically benign character, these unique physicochemical features sum up to a very attractive solvent profile of carbon dioxide for sustainable synthesis and production.     

超临界CO_2萃取甾醇的研究(1)

本文用超临界ＣＯ＿２对高酸价麦胚油进行选择住萃取，结果表明，萃取温度和压力不同时，萃取物中甾醇的含量不同．且甾醇混合物主要为β－谷甾醇和菜籽甾醇。萃取物的酸价也明显高于高酸价麦胚油。