Pr^3＋或Sm^3＋掺杂YAG∶Ce的发光特性及其荧光寿命

研究了Pr3 ,Sm3 掺杂对YAG∶Ce发射光谱及其荧光寿命的影响。观察到当掺杂Pr3 时,在609nm处出现Pr3 的发射峰,而掺杂Sm3 时,在616nm处呈现Sm3 的发射峰。掺杂Pr3 或Sm3 增加红光区的发射峰将有利于提高YAG∶Ce荧光粉的显色性。实验中测定了(Y0.95Sm0.01Ce0.04)3Al5O12、(Y0.95Pr0.01Ce0.04)3Al5O12、(Y0.96Ce0.04)3Al5O12的荧光寿命(τ),观察到在YAG∶Ce中掺入Pr3 或Sm3 使Ce3 的荧光寿命减小。实验结果表明,少量掺杂Pr3 或Sm3 并未引起基质的结构的变化。     

Y3Al5O12:Ce3+的余辉和热释光特性

高温固相法合成了Ce3+掺杂的Y3Al5O12(YAG)样品,研究了样品的结构、光致发光和热释发光性质.X射线衍射分析结果表明合成样品为YAG纯相,稀土离子的少量掺杂不改变基质YAG的结构.荧光光谱测试表明在高温空气气氛下Y2.95Al5O12:Ce4+0.05制备过程中存在Ce4+的自还原现象,一部分Ce4+被自还原为Ce3+,导致531nm黄光宽带发射.弱还原气氛下制备的Y2.95Al5O12:Ce3+0.05在紫外光照射后具有黄色长余辉,余辉时间长达35 min.热释光测试表明在Ce3+掺杂的YAG样品中存在热释发光,在弱还原气氛下制备的样品Y2.95Al5O12:Ce3+0.05的热释光随温度变化曲线上有112℃和256℃两个明显的热释光峰;而在空气气氛下制备的样品Y2.95Al5O12:Ce4+0.05的热释光随温度变化曲线上只有128℃一个明显的热释光峰.通过对比研究,热释发光主要来源于YAG基质中缺陷能级所陷俘的Ce3+.     

白光LED用球形Y2.96Al5O12:0.04Ce3+荧光粉的制备及光致发光

采用水热-热解法制备了可用于实现白光LED的Y2.96Al5O12∶0.04Ce3+荧光粉,通过X射线衍射(XRD)、扫描电镜(SEM)、X射线能谱(EDS)及荧光光谱(PL)等对Y2.96Al5O12∶0.04Ce3+荧光粉的物相、形貌及光致发光性能进行了表征。结果表明:水热-热解法制备出了物相纯净、分散性良好的球形Y2.96Al5O12∶0.04Ce3+粉体,该荧光粉可被460nm蓝光有效激发,发射光谱为峰值在550nm的一宽带,且水热-热解法得到的YAG∶Ce3+粉体发射强度优于传统高温固相法合成的YAG:Ce3+荧光粉;通过积分球耦合荧光光谱仪对荧光粉与蓝光芯片配合所得白光LED的量子效率进行了测试,结果表明:水热-热解法制备的Y2.96Al5O12∶0.04Ce3+荧光粉绝对量子效率为88.40%,外量子效率为78.64%,色坐标为(0.453 8,0.531 8),色温为358 4K,该方法制备的Y2.96Al5O12∶0.04Ce3+荧光粉稳定性及数据测定的重现性较好,是一种适用于暖白光LED的高性能黄色荧光粉。     

YAG:Pr3+的真空紫外光谱分析及其4f5d能级的研究

用共沉淀法制备出不同掺杂浓度的钇铝石榴石(Y3Al5O12,YAG):Pr3+粉末.在不同温度下用同步辐射的真空紫外光(VUV)作为激发光源测量了其发射和激发光谱.对YAG:Pr3+被VUV激发后的发光过程进行了分析,并估算了YAG:Pr3+的声子能量、黄昆因子S及Stokes位移.当用170nm光激发样品时,可能存在自陷激子和通过自陷激子能量传递引发的3P0发射,这种跃迁途径不同于用240nm和289nm两个波长激发后的跃迁途径;对Pr3+在YAG中的4f5d能级进行了研究,从而对其4f5d组态有了一个较清晰的认识.     

Yb:Y3Al5O12晶体晶格振动光谱的研究

采用提拉法生长Y3Al5O12(YAG)晶体和Yb3 掺杂原子数分数分别为5%,10%,15%,20%,25%,50%和100%的Yb:Y3Al5O12(Yb:YAG)晶体.系统表征和分析了Yb3 掺杂浓度对拉曼光谱的影响.随着Yb3 掺杂浓度的增加,晶体的振动模式没有明显的变化,晶体结构没有改变;在370 cm-1和785 cm-1附近,振动吸收峰的半峰全宽逐渐增大.分析得出,Yb3 掺杂浓度对晶体的晶格、对称性、荧光寿命均有影响,从而可能影响到晶体的光谱和激光性能.     

真空紫外光激发下掺Pr3+铝酸盐的自陷激子对Pr3+发光的影响

研究了SrAl12 O19:Pr3+和Y3Al5O12(YAG):Pr3+在20K,77K和300K的真空紫外(VUV)光谱,二者除了表现出Pr3+特有的发射性质外,还产生了一种特殊的发射现象,即自陷激子(STE)发射,并且其随着稀土离子浓度和温度的降低而增强.还着重讨论了自陷激子对Pr3+发光的影响.     

Dy3+和Ce3+共掺Y3Al5O12荧光粉的制备及发光性质

用高温固相法制备了YAG:5%Dy^3+以及(Ce 0.01 Dy y Y 0.99-y)3A15O12(y=0%,1%,3%,5%,7%,9%)荧光粉。XRD结果表明,NH 4Cl、LiCl、H3BO3三种助熔剂比较,添加H3BO3可有效降低YAG晶体的结晶温度,有效阻止中间相YAlO 3的形成。H3BO3做助熔剂在1450℃煅烧6 h制备的Dy^3+和Ce^3+掺杂Y 3Al 5O 12荧光粉具有单一YAG立方相结构,且随Dy^3+掺杂浓度增加,(420)衍射峰逐渐向小角度偏移。在583 nm监测下;与单掺1%Ce^3+样品比较,Ce^3+与Dy^3+共掺样品在342 nm处的吸收均减弱;与单掺5%Dy^3+样品比较,Ce^3+与Dy^3+共掺样品在351 nm处的吸收明显增强。351 nm激发下,随Dy^3+掺杂浓度增加,Ce^3+与Dy^3+共掺样品中Ce^3+在526 nm处的发射强度逐渐减小,而在583 nm处的发射强度先增加后减弱,这说明351 nm激发下,Ce^3+与Dy^3+共掺样品中存在Ce^3+向Dy^3+的部分能量传递。465 nm激发下,Ce^3+与Dy^3+共掺杂样品中只出现Ce^3+的发射峰,且随Dy^3+浓度增加,Ce^3+发光减弱。当Dy^3+离子浓度为3%时,Ce^3+与Dy^3+共掺样品中Dy^3+相对光强达到最大,此时Ce^3+→Dy^3+能量传递效率为15.7%。405 nm激发下,随Dy^3+掺杂浓度增加,合成粉体中Ce^3+的寿命逐渐减小。经计算,Ce^3+→Dy^3+能量传递临界距离为3.464 nm,为电四极-电四极相互作用的共振能量传递。     

Y3Al5O12：Ce^3＋的合成及真空紫外发光性质

采用高温固相反应及共沉淀法合成Y3-xAl5O12:Ce3 x(x=0.01,0.03,0.05,0.07,0.09)黄色系列粉末状发光材料.经X射线衍射分析产物为单相,属立方晶系,其结果与JCPDS标准卡(88-2047)相符.分析了两种方法合成的粉末样品的SEM照片,发现共沉淀法不仅能降低合成温度,对细化粉体晶粒粒度也有较大作用.检测了材料的真空紫外激发光谱和发射光谱.发现,Y3Al5O12:Ce3 的真空紫外激发光谱,在100~300 nm范围内呈三个带状峰,峰值分别在126,177,230 nm附近.随着Ce3 含量x由0.01增加到0.05,YAG:Ce3 发射强度逐渐增加到最大值,之后随着x继续增加其发射强度逐渐下降,呈现明显的浓度猝灭现象.     

LaF3∶Ce3+纳米晶的制备及荧光性质

采用水热法制备了掺杂Ce3+的LaF3的纳米粒子,分别用X射线粉末衍射(XRD)和荧光光谱(PL)对样品的结构和性质进行了表征.XRD的结果表明:LaF3∶Ce3+纳米晶标准卡为JCPDS 73-2192,且颗粒平均尺寸为18.7nm,掺入Ce3+杂质后晶格结构没有变化.荧光光谱结果表明:Ce3+呈现其宽带发射,激发峰在245nm处,发射峰在444nm处,随着Ce3+的摩尔浓度比的增加,样品的荧光强度先增大后减小,且Ce3+的掺杂量为4％(摩尔比)时,纳米粒子的荧光强度最强,但更高的掺杂浓度将导致荧光猝灭.     

用于白光LED的Y_(3-x-y)Pr_xGd_yAl_5O_(12):Ce~(3+)荧光粉发光特性研究

以稀土氧化物为原料,采用高温固相法,分别合成了钆、镨、以及钆镨共掺杂的YAG…Ce荧光粉。用荧光分光光度计对这几种荧光粉的激发光谱和发射光谱进行测试。结果表明,这几种荧光粉可以被蓝光(455~470 nm)有效激发;掺杂不同浓度的Gd3+可以使YAG…(Ce,Gd)荧光粉发射光谱的中心波长向红光波段产生不同程度红移;YAG…(Ce,Pr)荧光粉发射光谱新增610 nm处发射峰;YAG…(Ce,Pr,Gd)荧光粉的发射光谱不仅新增610nm处的红峰而且有红移现象,这有效弥补了传统白光LED光谱中红光成份不足这一缺陷,对白光LED在高显色性要求领域的应用有重大的意义。     

Cooperative energy transfer and frequency upconversion in Yb3+-Tb 3+ and Nd 3+-Yb 3+-Tb 3+ codoped GdAl3(BO3)4 phosphors

Polycrystalline GdAl₃(BO₃)₄ phosphors codoped with Yb³⁺/Tb³⁺ and/or Nd³⁺/Yb³⁺/Tb³⁺ have been synthesized by combustion method. Upon excitation with a 980 nm laser diode, an intense green upconversion luminescence has been observed in GdAl₃(BO₃)₄:Yb,Tb phosphor. The quadratic dependence of the luminescence on the pump-laser power indicating a cooperative energy transfer process. Meanwhile, it is noticed that upon excitation with 808 nm laser diode, intense luminescence has clearly been detected in GdAl₃(BO₃)₄:Nd,Yb,Tb phosphor. The luminescence intensity exhibits also a quadratic dependence on incident pump-laser power. However, no green-emission has been observed in GdAl₃(BO₃)₄ phosphors codoped with Yb³⁺/Tb³⁺ or Nd³⁺/Tb³⁺ respectively upon excited at 808 nm laser diode. A proposed upconversion mechanism involving energy transfer from Nd³⁺ to Yb³⁺, and then a cooperative energy transfer process from two excited Yb³⁺ to Tb³⁺ has been presented.     

Eu3+ luminescence and Gd3+-Eu3+ energy transfer in K5Li2GdF10:Eu3+

Polycrystalline samples of europium-doped K₅Li₂GdF₁₀ have been obtained by a slow cooling of melted compound and investigated using spectroscopy methods. Luminescence from the ⁵ D ₂ level of Eu³⁺ is found to be weak. Intense visible emission upon excitation into the ⁵ D ₂ or higher energy levels has been attributed to overlapping transitions from long-lived ⁵ D ₁ and ⁵ D ₀ levels. A strong increase of the ⁵ D ₀ emission at the expense of the ⁵ D ₁ emission occurs between 5 K and 25 K without significant change of the ⁵ D ₁ lifetime. To account for this, it is supposed that both the radiative and the nonradiative transition rates are temperature-dependent. Efficient energy transfer from the ⁶ G _J levels of Gd³⁺ to Eu³⁺ ions has been evidenced by excitation spectra in the VUV region and VUV-excited luminescence. It has been concluded that the cross relaxation contributes to the energy-transfer process. Received: 8 May 2001 / Accepted: 11 May 2001 / Published online: 25 July 2001     

Optical spectroscopy of Cr3+ and Cr3+-Tm3+ in alkaline silicate glasses

Conclusions Alkaline silicate glasses seem to be good candidates as host materials for codoping with Cr³⁺ and Tm³⁺. Cr³⁺ ions occupy mainly low-field sites in them, and their broadband emission overlaps Tm³⁺ excitation. As a consequence very high efficiency for the energy transfer Cr³⁺→Tm³⁺ is achieved with moderate concentrations of these ions. Moreover, the average lifetime of the Cr³⁺ ions in codoped glasses is long enough to allow significant energy storage by flashlamp pumping. Published in Zhurnal Prikladnoi Spektroskopii, Vol. 62, No. 5, pp. 115–120, September–October, 1995.     

Ce3+离子敏化Eu3+∶Cr3+∶Sm3+∶YAG外延层的荧光现象

对Ce3+ ∶Eu3+ ∶Cr3+ ∶Sm3+ ∶YAG处延层中的荧光敏化现象进行了报道和分析 ,在较高浓度的Ce3+ 离子掺杂时 ,外延层在蓝色、绿色波段出现了新的荧光谱线 ,可解释为在Ce3+ 离子敏化作用下 ,Eu3+ 离子产生了由高位激发态能级5Di(i=1,2 ,3)直接到基态能级7Fj(j =0 ,1,2 ,3)的辐射跃迁过程 ,并且这种Ce3+ ∶Eu3+ ∶Cr3+ ∶Sm3+ ∶YAG外延层还是一种新颖的白色单晶荧光材料。     

Stark splitting and energy transfer between Dy3+-Ho3+ and between Tb3+-Er3+ in calcium-lithium borate glass

Fluorescence spectrum of Dy³⁺, Dy³⁺-Ho³⁺, Tb³⁺ and Tb³⁺-Er³⁺ doped in calibo glass have been studied using Ar⁺ and excimer lasers. Non-radiative energy transfer from trivalent dysprosium and terbium (donors) to holmium and erbium (acceptors) respectively has been observed on the basis of decrease in the life time of the levels and reduction in fluorescence intensity of Dy³⁺ and Tb³⁺ on increasing Ho and Er concentrations. The interaction mechanism of donor and acceptor ions is found to be dipole-dipole in both cases. Various parameters such as donor-acceptor distances, non-radiative energy transfer efficiency (η) and energy transfer probability (P _da) have been computed. Stark splitting have also been marked in several intense transition of the two.     

LaOBr:Ce,Tb中Ce3+对Tb3+发光的影响

近年来人们对LaOBr:Tb的合成及其发光特性的研究日益增多。LaOBr:Tb不仅是良好的X光增感屏材料,也是较好的阴极射线发光材料。为了进一步提高它的亮度,降低了b的含量(因Tb很贵),寻求LaOBr中Tb3+发光的敏化剂是很重要的。     

GdBO3：Pr3+，Yb3+中Pr3+到Yb3+的能量传递及发光性质

采用高温固相法制备了一系列单掺或双掺Pr3+和Yb3+的GdBO3材料,分别测试分析了材料的物相结构和发光性质。在446 nm蓝光( Pr3+：3 H4→3 P2)激发下,检测到Yb3+的近红外特征发射,表明样品中存在Pr3+到Yb3+的能量传递。 Pr3+的掺杂浓度一定时,样品的发光会随着Yb3+掺杂浓度的改变而发生变化。通过对比不同掺杂情况下Pr3+：3 P0能级的衰减曲线,发现随着Yb3+的掺杂浓度的增加,该能级的荧光寿命不断缩短;同时利用不同条件下的衰减特性计算得出不同 Yb3+掺杂浓度样品的能量传递效率。用 Inokuti-Hirayama模型分析表明Pr3+-Yb3+能量传递类型为偶极子-偶极子相互作用。     

LaOBr:Ce3+,Tb3+中Ce3+与Tb3+间能量传递

本文利用毫微秒技术在ns秒量级测量了不同浓度组分的LaOBr:Ce3+,Tb3+中Ce3+发射带的衰减常数τCe值和时间分辨光谱,确立了Ce3到Tb3+能量传递过程模型,建立了动力学方程和导出能量传递的计算公式。据此计算出Ce3+到Tb3+的能量传递几率和效率,得出Ce3+,Tb3+的最佳浓度。     

溶胶-凝胶法制备CaSiO_3:Eu~(3+)Bi~(3+)

采用溶胶-凝胶法制备出了CaSiO_3:Eu~(3+)Bi~(3+),利用DTA样品进行了检测并分析了其反应过程。XRD谱图表明:在CaSiO_3中少量掺杂Eu~(3+)、Bi~(3+)并没有改变其晶体结构。