单斜及四方晶相ZrO2催化CO加氢反应性能的比较

研究了以纯单斜（ｍ）和四方（ｔ）晶相ＺｒＯ２为催化剂的ＣＯ加氢反应．尽管两种晶相催化剂均有较高的低碳烯烃的选择性,但是也发现了两者催化性能的显著差别．ｍ－ＺｒＯ２催化剂对异丁烯有突出的选择性,而ｔ－ＺｒＯ２催化剂,则只有乙烯和丙烯,几乎没有Ｃ４烯烃的选择性．室温下ＣＯ吸附的原位ＩＲ谱测试可见,只有在ｔ－ＺｒＯ２催化剂上观测到不可逆含氧吸附物种．吡啶吸附的Ｒａｍａｎ谱显示出它们之间表面性质的差别,ｍ－ＺｒＯ２催化剂表面存在等强度的Ｌｅｗｉｓ和Ｂｒｏｎｓｔｅｄ酸中心,而在ｔ－ＺｒＯ２催化剂表面几乎只有Ｂｒｏｎｓｔｅｄ酸中心．催化过程的一些模型分子电子结构计算也表明了ＺｒＯ２催化剂对低碳烯烃选择性内在的电子结构条件．我们推测ＣＯ在ｍ－ＺｒＯ２催化剂表面的孪式吸附物种可能是导致异丁烯产物的根源     

ZrO_2及SO_4~（2－）／ZrO_2超强酸催化剂的XRD分析

用ＸＲＤ技术从定性和定量上对ＺｒＯ＿２，特别是超强酸催化剂的物相和四方相ＺｒＯ＿２的含量进行了详细的考察。结果表明，的引入使的晶化温度比ＺｒＯ＿２大约提高了１００Ｋ，并且使亚稳态四方相ＺｒＯ＿２得以稳定。亚稳态四方相ＺｒＯ＿２的含量主要受处理液浓度和焙烧温度的影响。处理液浓度越大，四方相含量越高；焙烧温度越高；四方相含量越低。强酸性的Ｈ＿２ＳＯ＿４溶液比弱酸性的（ＮＨ＿４）＿２ＳＯ＿４溶液对四方相的生成更有利。在无定形ＺｒＯ＿２、四方相ＺｒＯ＿２和单斜相ＺｒＯ＿２上的稳定性依次减小。     

超细ZrO_2催化剂的织构和晶相结构对合成甲醇、异丁醇的影响

采用超临界干燥法制备ＺｒＯ２超细催化剂，用于一氧化碳加氢合成甲醇、异丁醇。考察了催化剂的焙烧温度、焙烧时间以及碱金属助剂对合成醇性能的影响，并结合Ｎ２吸附、ＴＥＭ、ＸＲＤ表征，研究催化剂的织构、体相结构与催化活性的关系。发现随着催化剂焙烧温度升高、焙烧时间的延长，ＺｒＯ２由四方晶型（ｔＺｒＯ２）向单斜晶型（ｍＺｒＯ２）转变；浸渍Ｋ２ＣＯ３在焙烧过程中能够稳定ｔＺｒＯ２，浸渍Ｎａ２ＣＯ３则促进四方晶型向单斜晶型的转变。微细颗粒四方晶型的ＺｒＯ２有利于异丁醇的生成。     

超细ZrO3催化剂的织构和晶相结构对合成甲醇,异丁醇的影响

采用超临界干燥法制备ＺｒＯ２超细催化剂，用于一氧化碳加氢合成甲醇，异丁醇。考察了催化剂的焙烧温度，焙烧时间以及碱金属助剂对合成醇性能的影响，并结合Ｎ２吸附，ＴＥＭ，ＸＲＤ表征，研究催化剂的织构，体相结构与催化活性的关系。发现随着催化剂焙烧温度升高，焙烧时间的延长，ＺｒＯ２由四方晶型向单斜晶型转变；浸渍Ｋ２ＣＯ３在焙烧过程中能够稳定ｔ－ＺｒＯ２，浸渍Ｎａ２ＣＯ３则促进四方晶型向单斜晶型的转变。     

制备方法对MoO_3／ZrO_2结构的影响及MoO_3／ZrO_2固体超强酸的结构特征 Ⅱ．活性组分存在形态的研究

ＬＲＳ，ＸＲＤ，ＸＰＳ结果表明，仲钼酸铵浸渍仅经干燥的Ｚｒ（ＯＨ）４再焙烧制得的固体超强酸（ＭｏＯ３／ＺｒＯ２（Ⅰ））与浸渍晶态ＺｒＯ２制得的部分氧化催化剂（ＭｏＯ３／ＺｒＯ２（Ⅱ）中，活性组分的存在形式明显不同．在ＭｏＯ３／ＺｒＯ２（Ⅱ）中，ＭｏＯ３以二维聚钼酸根形式单层分散在ＺｒＯ２上（其中单斜ＺｒＯ２为主），在～９５０ｃｍ－１处出现特征拉曼宽峰，超出单层分散容量的部分以晶态ＭｏＯ３形式存在．在ＭｏＯ３／ＺｒＯ２（Ⅰ）中，活性相以二维聚钼酸根和Ｍｏ—Ｏ—Ｚｒ表面物种两种表面态存在于介稳的四方ＺｒＯ２上，后者在ＬＲＳ谱中表现为～８１４ｃｍ－１的宽峰；ＭｏＯ３含量超过一定值时，多余的ＭｏＯ３在５５０℃即与四方ＺｒＯ２发生反应形成体相Ｚｒ（ＭｏＯ４）２．Ｍｏ—Ｏ—Ｚｒ表面物种中，Ｍｏ（Ⅵ）是四配位的，与四方ＺｒＯ２结合很强，它很可能与ＭｏＯ３／ＺｒＯ２具有超强酸性有密切关系．     

合成甲醇,异丁醇锆系催化剂的晶相结构

用ＬＲＳ和ＸＲＤ相结合方法对Ｚｒ－Ｋ和Ｚｒ－Ｍｎ－Ｋ催化剂进行了。考察共沉淀法制备的Ｚｒ－Ｋ、Ｚｒ－Ｍｎ－Ｋ催化剂焙烧温度和Ｋ２Ｏ、ＭｎＯ２含量对其晶相结合的影响。在Ｚｒ－Ｋ催化剂中，ＺｒＯ２以单斜和四方混合晶型存在，在Ｚｒ－Ｍｎ－Ｋ催化剂中，当ＭｎＯ２含量在１７－３０％时，催化剂中仅有高度分散的四方晶型晶型ＺｒＯ２它是合成甲醇、异丁醇的活性相。     

制备方法对MoO_3／ZrO_2结构的影响及MoO_3／ZrO_2固体超强酸的结构特征 Ⅰ．ZrO_2的形态与样品比表面的研究

ＸＲＤ，ＤＴＡ，比表面测定等结果表明，制备方法对ＭｏＯ３／ＺｒＯ２结构有决定性影响．仲钼酸铵浸渍仅经干燥的Ｚｒ（ＯＨ）４再经高温焙烧所得团体超强酸ＭｏＯ３／ＺｒＯ２（Ⅰ）与浸渍晶态ＺｒＯ２所得部分氧化催化剂ＭｏＯ３／ＺｒＯ２（Ⅱ）的载体形态有明显不同．（１）ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面数倍于ＭｏＯ３／ＺｒＯ２（Ⅱ）；（２）ＭｏＯ３含量增加时，ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面逐步增大至一极大值再缓缓下降，而ＭｏＯ３／ＺｒＯ２（Ⅱ）的比表面随ＭｏＯ３含量增加而单调下降；（３）在ＭｏＯ３／ＺｒＯ２（Ⅰ）中，ＺｒＯ２以介稳四方相存在，而在ＭｏＯ３／ＺｒＯ２（Ⅱ）中则是稳定的单斜相．在此基础上研究了事先引入的活性组分在载体织构形成过程中的作用，包括延迟ＺｒＯ２晶化，阻碍晶粒长大及与之相关的相变等，并讨论了ＭｏＯ３／ＺｒＯ２（Ⅰ）中ＭｏＯ３最佳含量的科学含义．     

Cu／ZnO／Al_2O_3／ZrO_2催化剂上乙醇脱氢合成乙酸乙酯Ⅰ．催化反应性能及机理

研究了经ＺｒＯ２改性的Ｃｕ／ＺｎＯ／Ａｌ２Ｏ３的催化性能，考察了操作条件、ＺｒＯ２含量及不同原料的影响．发现经共沉淀法制备的Ｃｕ／ＺｎＯ／Ａｌ２Ｏ３／ＺｒＯ２具有最佳的反应活性及选择性．以９５％乙醇为原料，在２６５℃，ＷＨＳＶ１．５ｈ－１时，乙醇转化率为６９．０％，乙酸乙酯选择性为７０．２％．使用无水乙醇为原料要好于９５％乙醇，使用乙醛或醇醛混合原料，亦有乙酸乙酯生成．乙醇在此催化剂上的反应机理为乙醇先在Ｃｕ上脱氢为乙醛，然后乙醛在酸碱双中心上发生Ｃａｎｎｉｚａｒｒｏ反应生成乙酸乙酯．还讨论了ＺｒＯ２的作用及催化剂活性降低的原因     

固体超强酸催化剂ZrO2-Dy2O3/SO42--HZSM-5的制备及结构性能关系的研究

合成了分子筛复合超强酸催化剂ＺｒＯ２－Ｄｙ２Ｏ３／ＳＯ＾２－４－ＨＺＳＭ－５;以柠檬酸和正丁醇的酯化反应为探针,运用Ｈａｍｍｅｔｔ指示剂法、ＢＥＴ、ＸＲＤ和ＡＥＳ等方法,考察了催化剂的制备条件与结构性能的关系。结果表明,Ｄｙ２Ｏ３与ＺｒＯ２的质量比为０．０３：１时,催化剂性能较好;最适宜焙烧温度为５５０℃,在此温度下制得的催化剂具有较大的比表面积和较强的酸性,催化剂中的ＺｒＯ２以四方晶形存在,该催     

Cu/ZnO/Al2O3/ZrO2催化剂上乙醇脱氢合成乙酸乙酯Ⅰ.催化反应性能及机理

研究了经ＺｒＯ２改性的Ｃｕ／ＺｎＯ／Ａｌ２Ｏ的催化性能，考察了操作条件，ＺｒＯ２含量及不同原料的影响，发现经共沉淀法制备了Ｃｕ／ＺｎＯ／Ａｌ２Ｏ３／ＺｒＯ２具有最佳的反应活性及选择性以９５％乙醇为原料，在２６５℃，ＷＨＳＶ１．５ｈ＾－１，乙醇转化率为６９．０％，乙酸乙酯选择性为７０．２％，使用无水乙醇为原料要好地９５％乙醇，使用乙醛或醇醛混合原料，亦有乙酸乙酯生成，乙醇在此催化剂上的反应机理为乙醇     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.