离子对分离和抑制电导检测法测定四乙基铵和四丁基铵根离子

建立了季铵盐的离子色谱分析方法.采用Dionex DX-500 型离子色谱仪,C18柱,电导检测器,以30%乙腈和10 mmol/L甲烷磺酸混合溶液为流动相,流量为1.00 mL/min.四乙基溴化铵和四丁基溴化铵的质量浓度和峰面积的相关系数分别为0.9996和0.9994;线性范围分别为10～80 mg/L和20～120 mg/L;检出限分别为0.28和0.76 mg/L;RSD分别为1.3%、 2.5%.该方法可用于分析水溶液中季铵盐的含量.     

‘Biting effect’ stabilizing gallate-type catechin/quaternary ammonium ion complexes

The relationship between the structure of catechins and their binding ability for quaternary ammonium ions was examined. From binding studies using eight catechins and benzyltrimethylammonium chloride, it was revealed that the binding ability of the gallate-type catechins is much higher than that of the non-gallate-type catechins. The quaternary ammonium ion binding site of the gallate-type catechins was determined to be the space formed by the galloyl group and the B-ring. The excellent binding ability of the gallate-type catechins is attributed to the ‘biting effect’ by the galloyl group and the B-ring.     

Liquid-liquid distribution of ion associates of hexabromotellurate (IV) with quaternary ammonium counter ions

The distribution behavior of ion associates (Q⁺)₂. TeBr₆²⁻ of TeBr₆²⁻ with quaternary ammonium cations (Q⁺) between aqueous phase and two organic phases (1,2-dichloroethane (DCE) and chloroform (CF)) was examined, and the extraction constants (log K_ex) were determined. The extractability with long-chain alkyltrimethylammonium cations (group I) is greater than that with symmetrical tetraalkylammonium cations (group II) in the 1,2-dichloroethane extraction system and the difference in log K_ex for two cations (one of each type) with the same number of carbon atoms was about 3 on the average. The contributions of a methylene group in the cations of groups I and II to log K_ex were found to be 0.431.10 and about 0.74 on the average. Among the ion associates examined, the extractability of the extracting solvent was in the DCE>CF; the difference in log K_ex was about 5 on the average.     

Mixed ternary ion associate formation between xanthene dye, cinchona-alkaloid and quaternary ammonium ion and its application to the determination of trace amounts of quaternary ammonium salts in pharmaceuticals

Xanthene dyes such as eosin and tetraiodofluorescein form 1:2 ion associates with quaternary ammonium ions at pH 7-9; however, the development of color in the organic solvent is poor. When a quaternary ammonium salt is added in the extractable 1:2 associate formed between a xanthene dye and a cinchona-alkaloid in the neutral media, a mixed ternary ion associate (xanthene dye:cinchona-alkaloid:quaternary ammonium ion=1:1:1) is formed. Its extractability is enhanced due to the more bulky associate formation. The ion association caused by addition of cinchona-alkaloids is unique. Of the cinchona-alkaloids, quinidine and cinchonidine with tetraiodofluorescein show excellent effects on sensitivity and extractability. Eosin and tetraiodofluorescein are useful as ion association reagents in the ion associate formation. The apparent molar absorptivities are about 1×10⁵ l mol⁻¹ cm⁻¹ and the calibration range for quaternary ammonium salt is from 2.5×10⁻⁷ to 1.5×10⁻⁶ M. The proposed method is applicable to the selective and sensitive determination of cetylpyridinium chloride, berberine chloride and benzethonium chloride in pharmaceuticals.     

A 15-crown-5-functionalized carbosilane dendrimer as ionophore for ammonium selective electrodes

The synthesis of CH(2)CHCH(2)OCH(2)[15-crown-5] (III) is achieved by the treatment of HOCH(2)- [15-crown-5] (I) with equimolar amounts of CH(2)CHCH(2)Br (II) in the presence of KOH. The hydrosilylation of III with Si(CH(2)CH(2)CH(2)SiMe(2)H)(4) (IV) in the presence of the Karstedt catalyst affords the crown ether end-capped carbosilane dendrimer Si(CH(2)CH(2)CH(2)Si-Me(2)CH(2)CH(2)CH(2)OCH(2)[15-crown-5])(4) (V). PVC-based membranes of V as ionophore with sodium tetraphenyl borate (NaTPB) as anion excluder and dioctyl phthalate (DOP), diphenyl ether (DPE), dibutyl amine (DBA) and dibutyl phthalate (DBP) as plasticizing solvent mediators were prepared and investigated as NH(4)(+)-selective electrode. The response of the electrode was linear with a Nernstian slope of 53.3mV/decade over an NH(4)(+) ion concentration range of 7.60x10(-6) to 1.0x10(-1)M and a detection limit of 3.9x10(-6)M. The response time to achieve a steady potential for NH(4)(+) ions was between 6 and 10s, and the electrode is suitable for use within the pH range of 2.2-8.5. The selectivity relative to alkali, alkaline earth, and transition heavy metal ions is good. The newly developed ionophore showed higher NH(4)(+) selectivity over K(+) ( [Formula: see text] ) and Na(+) ( [Formula: see text] ). The electrode could be used for at least 45 days without considerable alteration in its potential. The electrode also shows a better working concentration range and slope in comparison to other NH(4)(+)-selective electrodes reported in literature.     

溶胶-凝胶法修饰的硫氰酸根离子选择性电极(ISE)的研究

报道了一种基于溶胶-凝胶技术的新型硫氰酸根电极,讨论了电极性能的影响因素.该电极有良好的能斯特响应,斜率为63 mV/pC,线性范围为1.0×10-2～6.0×10-6mol/L,检出限为4.0×10-6 mol/L,适宜的pH范围为3.4～7.1.     

Effects of ion association of lipophilic quaternary ammonium salts in ion-exchange and potentiometric selectivity

It has been found experimentally and substantiated theoretically that the anion-exchange selectivity in water—lipophilic quaternary ammonium salts (QAS) toluene solutions systems as well as the potentiometric selectivity of plasticized PVC membranes containing QAS, are strongly influenced by ion association. In particular, it has been demonstrated that varying the steric accessibility of QAS exchange center is a powerful tool for the selectivity control. The experimental values of the selectivity change caused by variations in the QAS exchange center steric accessibility were about 3 orders of magnitude when the single-charged ions were exchanged for the single-charged ones and more than seven orders when double-charged ions were exchanged for the single-charged. The above effects have also been observed for the potentiometric selectivity of QAS-based PVC membranes and, to some extent, for the potentiometric selectivity of the neutral anion carrier-based membranes doped by QAS to provide anion permselectivity. This fact is of immediate practical interest for the development of ISE with improved selectivity. The obtained results allow to revise the generally accepted idea of QAS as “nonselective” ion-exchangers and to suggest specific ways for controlling the ion-exchange and potentiometric selectivity using the ion association as a tool.     

Study of beta-cyclodextrin/fluorinated trimethyl ammonium bromide surfactant inclusion complex by fluorinated surfactant ion selective electrode

The construction and performance of a liquid membrane electrode responsive to N-(1,1,2,2-tetrahydroperfluorooctyl)-N,N,N-trimethylammonium bromide (FTABr) and its use for the study of β-cyclodextrin/fluorinated surfactant inclusion complex is described. The electrode is based on the use of tetrahydroperfluorooctyltrimethylammonium-tetraphenylborate ion pair as electro active material in polyvinyl chloride (PVC) matrix plasticized using 2-Nitrophenyl octyl ether (NPOE). The electrode exhibits a fast, stable, reproducible and “Nernstian” response (59 ± 2 mV) for FTABr over the concentration range of 10⁻⁵ to 2 × 10⁻³ mol L⁻¹ at 298 K. The lowest detection limit is 2 × 10⁻⁶ mol L⁻¹ and the response time is around 20-30 s. The validity of the electrode, for detection of fluorinated surfactant ions and hence to carry out electrochemical measurements to study micellization of fluorinated surfactant, is verified by comparing the critical micelle concentration (cmc) value of FTABr obtained by using the electrode, with that obtained by surface tension measurements. Association constant K for β-cyclodextrin/FTABr complex is evaluated from the potentiometric measurements carried out using this electrode and is observed to be ∼1.26 × 10⁵. The results suggest that β-cyclodextrin forms an equimolar association complex with the FTA⁺ surfactant ion.     

Novel synthesis of aminoacetonitriles via the selective demethylation of quaternary ammonium salts

N-Methyl cyclic amines readily formed quaternary ammonium salts upon treatment with iodoacetonitrile in high yields (70–96%). The latter were selectively demethylated by heating in dimethylformamide to give aminoacetonitriles in moderate to good overall yields (36–69%).     

溶胶-凝胶膜修饰碳酸根离子选择电极的研究

利用溶胶-凝胶技术包埋电活性物质,制备溶胶-凝胶膜修饰的碳酸根离子选择电极。探索了Sol-Gel膜修饰CO32-选择电极的制备方法、测试条件及共存物的影响。电极的线性范围1.0×10-1~1.0×10-5mol/L,相关系数R2=0.993,检测限8.9×10-6mol/L,响应斜率22.1 mV/pCO3。电极稳定性和重现性良好,用于实际样品测定,回收率95.9%~99.0%。     

Modified gelatin with quaternary ammonium salts containing epoxide groups

An EPDDMAC-GE polymer （hydrophilic molecule） has been synthesized based on epoxypropyl dodecyl dimethyl ammonium chloride （EPDDMAC） and gelatin. A DEEPSAC-GE polymer （hydrophobic molecule） has been synthesized based on diethyl-2,3-epoxypropyl-[3-methyldimethoxyl] silpropyl ammonium chloride （DEEPSAC） and gelatin. Compared with initial gelatin, the gelatin modified with quaternary ammonium salts containing epoxide groups exhibits stronger antibacterial activity.     

Preparation of a stationary phase with quaternary ammonium embedded group for selective separation of alkaloids based on ion‐exclusion interaction

A stationary phase (named QA C10) with quaternary ammonium embedded between a propyl and a decyl chain was synthesized by immobilization of N,N‐dimethyldecylamine on chloropropyl–silica surface. A set of representative neutral, basic, and acidic compounds was employed to evaluate its chromatographic properties. The results illustrated that QA C10 was a mixed‐mode stationary phase possessing both hydrophobic and ionic characteristics. The QA C10 stationary phase was further used for selective separation of alkaloids from Cortex phellodendri. Under acidic condition, alkaloids could be eluted in first 8 min, while other neutral and acidic fractions were retained better on QA C10 column. Then, obtained alkaloid fraction was analyzed by LC‐MS/MS and 22 alkaloids were identified. Our study confirmed the advantages and application potential of the QA C10 stationary phase for alkaloids separation.     

Determination of the quaternary ammonium ion components of Aliquat 336 by electrospray mass spectrometry

A procedure is described for the identification and determination of the quaternary ammonium ion components of the commercial solvent extraction reagent Aliquat 336 using Electro Spray Mass Spectrometry (ESMS). The procedure is extremely rapid when compared with an existing procedure based on gas chromatography and produces comparable results in terms of accuracy and precision.     

Development of Polymeric Resin Ion‐exchanger Based Chloride Ion‐selective Electrode for Monitoring Chloride Ion in Environmental Water

A chloride ion‐selective electrode (ISE) membrane was developed by using a copolymeric ion‐exchanger resin (trimethyl ethenyl quaternary ammonium chloride polystyrene‐divinylbenzene copolymer resin, TMEQAC PSDVB), the ionophore ({μ‐[4,5‐Dimethyl‐3,6‐bis(dodecyloxy)‐1,2‐phenylene]}bis(mercury chloride), ETH9033), the plasticizer (bis(2‐ethylhexyl) sebacate, DOS), and the membrane substrate (polyvinylchloride, PVC). At 25 °C, the electrode exhibited an ideal Nernstian response of 59.2 mV/decade with the linear calibration concentration range from 1.0 × 10^?4‐1.0 × 10^?2 M (r² = 0.9930). The limit of detection was 2.45 ppm (6.9 × 10^?2 mM) and the measurement response time was less than 10 seconds. The working temperature range of electrode was 10‐45 °C. The working pH range for chloride ion measurement was 2.0‐11.0. Among the various anions examined in this work, only I^?, SCN^?, and MnO₄^? ions show significant interference to the electrode measurement. The chloride ISE can be used at least 72 days. The determination of chloride ion content in three kinds of environmental water sample with the electrode method was accurate (92‐95%) and precise (RSD < 4.4%) and did not show significance difference from the high‐performance liquid chromatography method.     

碘离子选择电极检测催化动力学分析法测定抗坏血酸

在稀硫酸介质中，痕量去氢抗坏血酸对Ｖ（Ｖ）－ＢｒＯ３＾－－Ｉ＾－反应有强烈的催化作用，体系中Ｉ＾－浓度的变化可供碘离子选择电极跟踪检测。据此，本文建立了测定６×１０＾－７￣２×１０＾－５ｍｏｌ／Ｌ抗坏血酸的催化动力新分析法，用于实际样品分析获得较好结果。     

Fluorescence quenching of ethidium ion by porphyrin cations and quaternary ammonium surfactants in the presence of DNA

Fluorescence quenching of free and DNA-bound ethidium bromide (EB) by a number of quaternary ammonium and other compounds was studied. For free EB or bound EB at lower DNA concentration the fluorescence quenching follows the Stern–Volmer equation and at higher DNA concentration follows an exponential model. At least at low quencher concentrations the quenching efficiency varies with DNA or NaCl concentrations and is about 100 times greater for bound than free EB. The quenching pathways may involve energy transfer and conformational loosening or distortion of the DNA helix in addition to possible electron transfer.     

Perchlorate selective membrane electrodes based on a platinum complex

Three platinum(II) complexes were synthesized and studied to characterize their ability as an anion carrier in a PVC membrane electrode. The polymeric membrane electrodes (PME) and also coated glassy carbon electrodes (CGCE) prepared with one of these complexes showed excellent response characteristics to perchlorate ions. The electrodes exhibited Nernstian responses to ClO₄ ⁻ ions over a wide concentration range from 1.5 × 10⁻⁶ to 2.7 × 10⁻¹ M for PME and 5.0 × 10⁻⁷ to 1.9 × 10⁻¹ M for CGCE with low detection limits (9.0 × 10⁻⁷ M for PME and 4.0 × 10⁻⁷ M for CGCE). The electrodes possess fast response time, satisfactory reproducibility, appropriate lifetime and, most importantly, good selectivity toward ClO₄ ⁻ relative to a variety of other common anions. The potentiometric response of the electrodes is independent of the pH of the test solution in the pH range 2.0–9.0. The proposed sensors were used in potentiometric determination of perchlorate ions in mineral water and urine samples. Correspondence: Ahmad Soleymanpour, Department of Chemistry, Damghan Basic Science University, Damghan, Iran.     

Tailoring polyethersulfone/quaternary ammonium polysulfone ultrafiltration membrane with positive charge for dye and salt selective separation

Polyethersulfone (PES)/quaternary ammonium polysulfone (QAPSf) blend ultrafiltration (UF) membranes with positive charge were fabricated by nonsolvent induced phase separation (NIPS) for use in dye and salt selective separation. QAPSf was synthesized by nucleophilic substitution with chloromethylated polysulfone (CMPSf). The effect of the PES/QAPSf mass ratio on the morphology and performance of blend UF membranes were studied. The membranes' zeta potentials gradually changed from negative to positive with decreases in the PES/QAPSf mass ratio. At PES/QAPSf mass ratios of 30:70 and 10:90, the zeta potentials of the membranes reached +1.8 mV and + 5.9 mV, respectively. Additionally, the contact angles of the membranes decreased from 74° to 52° as the QAPSf content increased from 0 wt% to 90 wt%. Furthermore, the membrane with a PES/QAPSf mass ratio of 30:70 showed a high water permeance (181.4 LMH bar⁻¹) and excellent dye and salt selective separation performance. The rejection ratios reached 99.1%, 87.8%, 99.6%, and 92.4% for dyes Congo red, methyl blue, Alixin blue 8GX, and basic blue 24, respectively, while those for salts Na₂SO₄, MgSO₄, MgCl₂, and NaCl were ≤ 10%. In addition, the PES/QAPSf membranes showed excellent antifouling performance and good operating stability with dye-salt mixtures of various pHs and salt concentrations.     

Construction and performance characteristics of new ion selective electrodes based on carbon nanotubes for determination of meclofenoxate hydrochloride

This work offers construction and comparative evaluation the performance characteristics of conventional polymer (I), carbon paste (II) and carbon nanotubes chemically modified carbon paste ion selective electrodes (III) for meclofenoxate hydrochloride are described. These electrodes depend mainly on the incorporation of the ion pair of meclofenoxate hydrochloride with phosphomolybdic acid (PMA) or phosphotungestic acid (PTA). They showed near Nernestian responses over usable concentration range 1.0 × 10⁻⁵ to 1.0 × 10⁻² M with slopes in the range 55.15–59.74 mV (concentration decade)⁻¹. These developed electrodes were fully characterized in terms of their composition, response time, working concentration range, life span, usable pH and temperature range. The electrodes showed a very good selectivity for Meclo with respect to a large number of inorganic cations, sugars and in the presence of the degradation product of the drug (p-chloro phenoxy acetic acid). The standard additions method was applied to the determination of MecloCl in pure solution, pharmaceutical preparations and biological samples. Dissolution testing was also applied using the proposed sensors.     

溶胶-凝胶基质修饰的镉离子选择性电极

一种以CdS为活性物质,用溶胶 凝胶技术制作的新型镉离子选择性电极。电极的斜率为29mV/decade,线性范围为1.0×10-1～6.0×10-5mol/L,检测下限为4.5×10-5mol/L,适宜的pH3.2～5.9,并对回收率进行了测定。