Thermal and mechanical properties of cationic guar gum/poly(acrylic acid) hydrogel membranes

Novel hydrogel membranes (coded as GA) based on cationic guar gum (CGG) and poly(acrylic acid) (PAA) were synthesized with various feed compositions. Their structure and properties were studied by Fourier transform infrared spectra, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analyses and tensile tests. The structure analyses indicated that there existed strong electrostatic interaction between CGG and PAA, which resulted in uniform structure and complete miscibility between the two components. On the basis of thermogravimetric analyses, the activation energies (E_a) of the first degradation of the membranes increased from 34.5 to 77.1 kJ/mol with an increase of CGG content, while the residual ratios of the membranes increased from 7.6 to 36.1 wt% at 600 °C. This indicated an elevated thermal stability of PAA-based materials through an introduction of CGG. The tensile tests exhibited the mechanical properties of the membranes were improved with an increase of CGG content, and the maximum value of 41.1 MPa was reached.     

Transparent h-BN/polyacrylamide nanocomposite hydrogels with enhanced mechanical properties

In this study, a facile way has been proposed to prepare transparent, tough and flexible polyacrylamide (PAM) hydrogels which is composed of a dually crosslinked single network by chemical crosslinking of N,N'-methylenebisacrylamide (BIS) and physical crosslinking of hydrophilic hexagonal boron nitride (hBN) nanosheets. The resulting h-BN/PAM nanocomposite hydrogels are highly transparent, and exhibit significantly enhanced mechanical properties compared to the dark (GO)/PAM nanocomposite hydrogels or chemical crosslinking PAM hydrogels. Thus it opens up new opportunities for developing nextgeneration transparent, tough and flexible hydrogels that hold great promise in such important applications as light responsive soft robot and liquid microlenses.     

Highly stretchable and self-healing hydrogels based on poly(acrylic acid) and functional POSS

Herein, we present a novel way for the production of self-healing hydrogels with stretch beyond 4200% than their initial length and relatively high tensile strength(0.1?0.25 MPa). Furthermore, the hydrogel was insensitive to notch. Even for the samples containing V-notches, a stretch of 2300% was demonstrated. The hydrogels were developed by in situ crosslinking of the self-assembled colloidal poly(acrylic acid)(PAA)/functionalized polyhedral oligomeric silsesquioxane(POSS) micelles. This was achieved by the addition of functionalized polyhedral oligomeric silsesquioxane with tertiary amines and hydroxyls(POSS-AH) into the PAA reaction solution. The POSS-AH led to micellar growth, then the dualcrosslinked network was constructed. One type of crosslink was formed by hydrogen-bonding and ionic interactions between PAA chains and POSS-AH, the other type of crosslink was formed by covalent bonds between PAA and bis(N,N'-methylenebis-acrylamide).     

Organically modified rectorite toughened poly(lactic acid): Nanostructures, crystallization and mechanical properties

To improve the toughness of PLA, poly(lactic acid) (PLA)/organically modified rectorite (OREC) nanocomposites were prepared via the melt-extrusion method. A partially exfoliated and partially intercalated structure was confirmed by WAXD and TEM. The crystallization behaviors of neat PLA and nanocomposite were studied by POM and DSC, and it was found that OREC had a great effect on the overall crystallization rate and spherulitic texture of PLA. The presence of OREC could toughen PLA greatly. For example, when 1 wt.% OREC was added, the elongation at break of the nanocomposite was increased to 210%. The toughening mechanism was analyzed through the observation of the inner structure of the tensile test bar using SEM.     

Highly stretchable,self-adhesive,and self-healable double network hydrogel based on alginate/polyacrylamide with tunable mechanical properties

A number of synthetic hydrogels suffer from low mechanical strength. Despite of the recent advances in the fabrication of tough hydrogels, it is still a great challenge to simultaneously construct high stretchability, and self-adhesive and self-healing capability in a hydrogel. Herein, a new type of double network hydrogel was prepared based on irreversible cross-linking of polyacrylamide chains and Schiff-base reversible cross-linking between glycidyl methacrylate-grafted ethylenediamine and oxidized sodium alginate (OSA). The combination of both cross-linkings and their synergistic effect provided a novel hydrogel with high strength, stretchable, rapid self-healing, and self-adhesiveness to different material. Besides, the hydrogels with diverse OSA content could maintain their original shapes after loading–unloading tensile test. The resulting hydrogel has a great potential in various fields for supporting and load-bearing substance.     

Swelling properties of aspartic acid-based hydrogels

Chemically crosslinked poly(aspartic acid) (PASP) gels were prepared by the hydrolysis of polysuccinimide (PSI). This latter was prepared by thermal polycondensation of aspartic acid. The PSI chains were crosslinked by 1,4-diaminobutane. The consecutive reactions of hydrolysis and swelling kinetics of PSI- and PASP-based gels were studied at different pH values. Two distinct swelling mechanisms were proposed. The cooperative diffusion coefficient has been found to be three orders of magnitude higher in pH 14 solution than at pH 8.     

Poly(lactic acid)/poly(butylene succinate)/calcium sulfate whiskers biodegradable blends prepared by vane extruder: Analysis of mechanical properties,morphology, and crystallization behavior

Ternary blends of PLA/PBS/CSW with different weight fractions were prepared using a vane extruder. The mechanical properties, morphology, crystallization behavior and thermal stability of the blends were investigated. For the PLA/CSW blend, the tensile strength decreased, the flexural strength and modulus increased compared with pure PLA. For PBS, the addition of CSW had little influence on the mechanical properties. For the ternary blends PLA/PBS/CSW, the tensile strength, flexural strength and modulus decreased compared with pure PLA, while the elongation at break and the impact strength increased significantly. The brittle-ductile transition of the blends took place when the PBS weight fraction reaching 30 wt%. As a soft component in the blends, PBS was beneficial to improve the tensile ductility and the toughness of PLA. SEM measurements reveal that PLA/PBS/CSW blends were immiscible. When the weight fraction of PBS was 50 wt%, significant phase separation was observed, and CSW had preferential location in the PBS phase of the blend. DSC measurement and POM observation reveal that CSW had a heterogeneous nucleation effect on PLA and PBS matrix. The addition of PBS improved the crystallization of PLA and the thermal resistance of the PLA/PBS/CSW blends significantly.     

pH敏感的聚(L-谷氨酸)-交联聚丙烯酸水凝胶的合成与性能研究

通过在聚L-谷氨酸侧链部分接枝甲基丙烯酸2-羟乙酯得到含有双键的聚(L-谷氨酸),将其与丙烯酸共聚得到由聚(L-谷氨酸)侧链接枝并交联聚丙烯酸的pH敏感水凝胶.研究水凝胶在不同pH的缓冲溶液中的溶胀性、溶胀动力学,并通过SEM观察水凝胶的微观结构.结果表明,水凝胶在低pH环境下的溶胀率明显低于高pH环境中的溶胀率,不同...     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

Fabrication and enhanced mechanical properties of porous PLA/PEG copolymer reinforced with bacterial cellulose nanofibers for soft tissue engineering applications

A new class of polylactic acid (PLA)/polyethylene glycol (PEG) copolymer reinforced with bacterial cellulose nanofibers (BC) was prepared using a solvent casting and particulate leaching methods. Four weight fractions of BC (1, 2.5, 5, and 10 wt%) were incorporated into copolymer via silane coupling agent. Mechanical properties were evaluated using response surface method (RSM) to optimize the impact of pore size, porosity, and BC contents. Compressive strength obtained for PLA/PEG-5 BC wt% was 9.8 MPa, which significantly dropped after developing a porous structure to 4.9 MPa. Nielson model was applied to investigate the BC stress concentration on the PLA/PEG. Likewise, krenche and Hapli-Tasi model were employed to investigate the BC nanofiber reinforcement and BC orientation into PLA/PEG chains. The optimal parameters of the experiment results found to be 5 wt% for BC, 230 μm for pore size, and 80% for porosity. Scanning electron microscopy (SEM) micrograph indicates that uniform pore size and regular pore shape were achieved after an addition of BC-5% into PLA/PEG. The weight loss of copolymer-BC with scaffolds enhanced to the double values, compared with PLA/PEG-BC % without scaffolds. Differential Scanning Calorimetric (DSC) results revealed that the BC nanofiber improved glass transition temperature (T_g) 57 °C, melting temperature (T_m) 171 °C, and crystallinity (χ %) 43% of PLA/PEG reinforced-BC-5%.     

IMPROVED DYEABILITY AND MECHANICAL PROPERTIES OF WOOL FIBERS GRAFTED WITH POLY(ACRYLIC ACID) BY GAMMA-RADIATION

Graft copolymerization of acrylic acid onto wool fibers was carried out using a γ-radiation induced technique. The degree of grafting was influenced by the monomer concentration and the radiation dose. The changes in the polymorphism of the grafted wool fibers were investigated and compared with that of the parent fibers. A further increase in the degree of grafting was found to cause a slight reduction in moisture sorption. Affinity towards basic dye and the mechanical properties of wool fibers were improved by the graft process.     

Swelling kinetics of poly(aspartic acid)/poly(acrylic acid) semi‐interpenetrating polymer network hydrogels in urea solutions

Semi‐interpenetrating network (semi‐IPN) hydrogels, composed of poly(aspartic acid) (PAsp) and poly(acrylic acid) (PAAc) with various ratios of PAsp to AAc, were prepared. In this work, swelling kinetics was investigated through calculating some parameters. The swelling ratios were measured at room temperature, using urea solutions as liquids to be absorbed. Compared to in deionized water, the hydrogels showed larger swelling ratios in urea solutions, which might be attributed to the chemical composition of urea. The equilibrium swelling ratio could achieve 600 g/g, and the equilibrium urea/water contents were more than 0.99. The diffusion exponents were between 0.5 and 0.7, suggesting that the solvent transport into the hydrogel was dominated by both diffusion and relaxation controlled systems. Therefore, the PAsp/PAAc semi‐IPN hydrogels were appropriate to carry substances in a urea/water environment for pharmaceutical, agricultural, environmental, and biomedical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 666–671, 2010     

Influence of chemical surface modification of cellulose nanowhiskers on thermal,mechanical, and barrier properties of poly(lactide) based bionanocomposites

In the aim of producing fully organic bionanocomposite based on poly(lactide) (PLA), cellulose nanowhiskers (CNW) were grafted by n-octadecyl-isocyanate (CNW-ICN) applying an in situ surface grafting method. The compatibilizing effect of the long aliphatic grafted chain was investigated by thermal, mechanical and permeability analysis of solvent cast nanocomposite films. The grafted CNW-ICN could be successfully dispersed in the polymer matrix. The gained compatibility brought about a nucleating effect, decreasing the half time of isothermal crystallization from 25 min for the neat PLA to 8.4 min for the nanocomposite including 2.5 wt% CNW-ICN, e.g., tensile strength was improved by 10 MPa for the same 2.5 wt% CNW-ICN/PLA composite. Mechanical reinforcement was also effective in the rubbery state of PLA and increased the tensile modulus of the rubbery plateau providing thereby thermal resistance to the polymer. Oxygen barrier properties did not change significantly upon the inclusion of CNW-ICN, even when the quantity of CNW-ICN was increased to 15 wt%. More interestingly, the water vapour permeability of the CNW-ICN nanocomposite was always lower than the one of ungrafted CNW composites, which led to the conclusion that the hydrophobic surface graft and improved compatibility could counteract the effect of inclusion of hydrophilic structures in the matrix on water vapour transport. In conclusion, the surface grafting of CNW with isocyanates might be an easy and versatile tool for designing fully organic bionanocomposites with tailored properties.     

Structure and mechanical properties of blends of poly(ether imide) and an amorphous polyamide

Biphasic poly(ether imide)/poly(trimethyl hexamethylene terephthalamide) blends were obtained by injection moulding through the full composition range both with and without previous extrusion mixing. The extruded blends showed an improved performance, as the T_gs of the two amorphous phases changed and the changes were larger than those of directly injected blends. The T_g changes indicate the presence of the two components in the two phases of the extruded blends. The consequent low interfacial tension is proposed as the reason for the observed generally fine particle size (typically 0.3 μm). Both characteristics led to mostly ductile materials. The modulus of elasticity and the yield stress were slightly below those predicted by the rule of mixtures. As this was due to a lower orientation in the blends, both properties could improve through a change of the processing parameters. The increase in impact strength over that of pure PEI, and particularly, the sudden processability increase (35% torque decrease) upon a-PA addition, led to compatible blends that, as in the case of the 90/10 composition, could be a polymeric material alternative to unmodified PEI.     

Fully biodegradable blends of poly(butylene succinate) and poly(butylene carbonate): Miscibility, thermal properties, crystallization behavior and mechanical properties

Fully biodegradable poly(butylene succinate) (PBS) and poly(butylene carbonate) (PBC) blends were prepared by melt blending. Miscibility, thermal properties, crystallization behavior and mechanical properties of PBS/PBC blends were investigated by scanning electron microscopy (SEM), phase contrast optical microscopy (PCOM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and mechanical properties tests. The SEM and PCOM results indicated that PBS was immiscible with PBC. The WAXD results showed that the crystal structures of both PBS and PBC were not changed by blending and the two components crystallized separately in the blends. The isothermal crystallization data showed that the crystallization rate of PBS increased with the increase of PBC content in the blends. The impact strength of PBS was improved significantly by blending with PBC. When the PBC content was 40%, the impact strength of PBS was increased by nearly 9 times.     

Water resistance, mechanical properties and biodegradability of methylated-cornstarch/poly(vinyl alcohol) blend film

The main shortcomings of biodegradable starch/poly(vinyl alcohol) (PVA) film are hydrophilicity and poor mechanical properties. With an aim to overcome these disadvantages, cornstarch was methylated and blend films were prepared by mixing methylated-cornstarch (MCS) with PVA. The mechanical properties, water resistance and biodegradability of the MCS/PVA film were investigated. It was found that MCS/PVA film had higher water resistance than the native starch/PVA film. However, the water resistance of MCS/PVA films did not have significant difference with the increase in the degree of substitution (DS) of the methylated starch from 0.096 to 0.864. Enzymatic, microbiological and soil burial biodegradation results indicated that the biodegradability of the MCS/PVA film strongly depended on the starch proportion in the film matrix. The degradation rate of starch in the starch/PVA film was hindered by blending starch with PVA. Both tensile strength and percent elongation at break of the MCS/PVA film were improved as DS of the methylated starch increased. Conversely, increasing the methylated starch proportion in film matrix deteriorated both tensile strength and percent elongation at break of the film.     

Multiblock copolymers composed of poly(butylene succinate) and poly(1,2-propylene succinate): Effect of molar ratio of diisocyanate to polyester-diols on crosslink densities, thermal properties, mechanical properties and biodegradability

In order to study the relationship between structure and properties, multiblock copolymers composed of poly(butylene succinate) (PBS) and poly (1,2-propylene succinate) (PPSu) have been synthesized by chain-extension at various molar ratios of hexamethylene diisocyanate (HDI) to polyester-diols, which have been abbreviated as R-values in this paper. Molecular weights of soluble fractions, gel fractions and crosslink densities have been determined. Thermal properties, mechanical properties and biodegradability have been studied and correlated with R-values. Crystallization of copolymers becomes difficult with increasing R-value. Tensile strength, flexural strength and flexural modulus tend to increase with increasing R-value up to 1.2, and vary little when R-value increases from 1.2 to 1.3, then decrease with further increase in R-value. Impact strength achieves a maximum value at R-value of 1.3. Biodegradation rate reaches a minimum value when R-value is 1.1. Biodegradation has been studied systematically by attenuated total reflectance Fourier transform infrared (ATR-FTIR), ¹H NMR and SEM.     

Influence of poly (ethylene glycol) on the thermal, mechanical, morphological, physical-chemical and biodegradation properties of poly (3-hydroxybutyrate)

Blends of poly (3-hydroxybutyrate) (PHB) with poly (ethylene glycol) (PEG), (PHB/PEG), in different proportions of 100/0, 98/2, 95/5, 90/10, 80/20 and 60/40 wt%, respectively, were investigated for their thermal properties (using differential scanning calorimetry and thermogravimetric analysis), tensile properties, water vapor transmission rate, enzymatic biodegradation (using light microscopy) and mass retention. The addition of plasticizer did not alter the thermal stability of the blends, although an increase in the PEG content reduced the tensile strength and increased the elongation at break of pure PHB.     

The production and properties of polylactide composites filled with expanded graphite

Composites have been produced by melt-blending biodegradable polylactide (PLA) with commercially available expanded graphite (EG). Using different techniques of addition, the manifold effects of EG on PLA molecular, thermo-mechanical and fire-retardant properties were evaluated. The EG nanofiller provides PLA composites with competitive functional properties. They have a high rigidity, with Young's modulus and storage modulus increasing with EG content. They also have excellent thermal stability while preserving the glass transition and melting temperature of the original PLA matrix. Purification and pre-dispersion of EG nanofiller proved beneficial for preserving PLA molecular weights and led to improved mechanical performance. The presence of dispersed graphene nanolayers in PLA significantly accelerated the polyester crystallization process. The flame retardant properties also displayed improvements with a large decrease in the maximum rate of heat release as recorded by cone calorimetry, whereas the horizontal burning test (UL94 HB) was successfully passed revealing non-dripping and char formation.     

Mechanically robust hydrophobized double network hydrogels and their fundamental salt transport properties

Water swollen polymer networks are attractive for applications ranging from tissue regeneration to water purification. For water purification, charged polymers provide excellent ion separation properties. However, many ion exchange membranes (IEMs) are brittle, necessitating the use of thick support materials that ultimately decrease throughput. To this end, novel double network hydrogels (DNHs) with variable water content are prepared and characterized in terms of mechanical and ion transport properties to evaluate their potential utility as tough membrane materials. The first network contains fixed anionic charges, while the other is comprised of a copolymer with varied ratios of hydrophobic ethyl acrylate (EA) and hydrophilic dimethyl acrylamide (DMA) repeat units. Characterization of freestanding DNH films reveals a reduction in water content from 88 to 53 wt% and a simultaneous increase in ultimate stress and strain by ~3.5× and ~4.5×, respectively, for 95%/5% EA/DMA, relative to 100% DMA. Fundamental salt transport properties relevant to water purification, including permeability, solubility, and diffusivity, are measured and systematically compared with conventional membrane materials to inform the development of DNHs for membrane applications. The ability to simultaneously reduce water content and increase mechanical integrity highlights the potential of DNHs as a synthetic platform for future membrane applications.