Multiple melting behavior of poly(butylene succinate)

The multiple melting behavior of poly(butylenes succinate) (PBS) isothermally crystallized from the melt was investigated using differential scanning calorimetry (DSC), temperature modulated DSC (MDSC) and polarized optical microscopy. PBS exhibits at most four melting endotherms (denoted as T_m1, T_m2, T_m3, and T_m4 from high to low temperatures) and a crystallization exotherm (denoted as T_re) in the DSC heating trace. Multiple melting endotherms were observed even at high heating rates. The origins of each endothermal and exothermal peak were discussed in detail. It is suggested that: (i) the crystallization exothermic peak, T_re, relates to the recrystallization of the melt of the crystallites with lower thermal stability; (ii) the T_m1 is ascribed to the melting of crystallites formed through recrystallization; (iii) two crystal populations with different thermal stability are responsible for the T_m2 and T_m3; (iv) the T_m4, which is the annealing peak, represents the transition of the rigid amorphous fraction (RAF) from solid-like RAF into liquid-like amorphous fraction.     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

聚丁二酸丁二醇酯在堆肥条件下的生物降解性能研究

根据ISO 14855的检测方法,研究了聚丁二酸丁二醇酯(PBS)在堆肥条件下的生物降解性能,结果 表明PBS具有良好的生物降解性,且其形态对其降解速率有显著的影响,降解速率:PBS粉末>PBS片>PBS 颗粒。对堆肥中的微生物进行分离鉴定,在所选堆肥中主要分离出四种菌株:杂色曲霉菌、青霉菌、芽包杆菌 和直杆高温多孢菌,它们对PBS的降解能力各不相同,其中最有效降解PBS的菌株是杂色曲霉菌。     

Performance of biodegradable microcapsules of poly(butylene succinate), poly(butylene succinate-co-adipate) and poly(butylene terephthalate-co-adipate) as drug encapsulation systems

Poly(butylene succinate) (PBSu), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene terephthalate-co-adipate) (PBTA) microcapsules were prepared by the double emulsion/solvent evaporation method. The effect of polymer and poly(vinyl alcohol) (PVA) concentration on the microcapsule morphologies, drug encapsulation efficiency (EE) and drug loading (DL) of bovine serum albumin (BSA) and all-trans retinoic acid (atRA) were all investigated. As a result, the sizes of PBSu, PBSA and PBTA microcapsules were increased significantly by varying polymer concentrations from 6 to 9%. atRA was encapsulated into the microcapsules with an high level of approximately 95% EE. The highest EE and DL of BSA were observed at 1% polymer concentration in values of 60 and 37%, respectively. 4% PVA was found as the optimum concentration and resulted in 75% EE and 14% DL of BSA. The BSA release from the capsules of PBSA was the longest, with 10% release in the first day and a steady release of 17% until the end of day 28. The release of atRA from PBSu microcapsules showed a zero-order profile for 2 weeks, keeping a steady release rate during 4 weeks with a 9% cumulative release. Similarly, the PBSA microcapsules showed a prolonged and a steady release of atRA during 6 weeks with 12% release. In the case of PBTA microcapsules, after a burst release of 10% in the first day, showed a parabolic release profile of atRA during 42 days, releasing 36% of atRA.     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

聚丁二酸丁二酯的合成、共聚改性及功能化研究进展

聚丁二酸丁二酯(PBS)因具备良好的物理性能和加工性能而备受关注,是最具有前途的生物降解材料之一。本文总结了PBS材料合成、共聚改性及其功能化方面的研究进展。无规共聚、嵌段共聚等方法可以调节材料的力学性能、生物降解性能、热性能和结晶行为。通过与聚富马酸丁二酯无规共聚或者嵌段共聚,可以利用分子链上的双键高效引入磺酸根、羧酸、氨基等基团,提高材料的亲水性和生物相容性能,并制备PH响应性的电荷翻转胶束,拓展PBS在生物医药领域的应用。     

Effect of transesterification reactions on the crystallization behaviour and morphology of poly(butylene/diethylene succinate) block copolymers

The melting behaviour, the crystallization kinetics and the morphology of block poly(butylene/diethylene succinate) copolymers (PBSPDGS) were investigated by means of differential scanning calorimetry and hot stage optical microscopy. Multiple endotherms were evidenced in the PBSPDGS samples, due to melting and recrystallization processes, similarly to PBS. By applying the Hoffman-Weeks’ method, the of both the homopolymer and the copolymers was derived. The isothermal crystallization kinetics was analyzed according to the Avrami’s treatment. The copolymers with long PBS blocks are characterized by a very similar behaviour with respect to pure poly(butilene succinate), indicating that PBS macromolecular folding is not affected by the presence of non-crystallizable diethylene succinate blocks. On the contrary, the copolymers characterized by very short PBS block length were found to crystallize at a slower rate than the homopolymer. As a matter of fact, a higher value of the work of chain folding was also derived on the basis of Hoffman-Lauritzen nucleation theory. Anyway, in all cases the crystallization mechanism (heterogeneous nucleation and three-dimensional growth) was found to be the same.     

The Effect of Substrate on the Annealing of Poly(butylene succinate) Single Crystals

The morphological evolution of poly(butylene succinate) (PBS) solution‐grown single crystals during annealing was studied using hot‐stage atomic force microscopy. Their morphology changed with increasing temperature and annealing time. The annealing behavior and melting temperature were found to be affected by the substrate. Morphological changes occurred at a much lower temperature on an amorphous carbon film than that on a mica surface. Moreover, the pattern of morphological evolution of the single crystals on a carbon film was different from that on a mica surface. Since the PBS melt had a larger contact angle on the mica surface, these differences in the melting behavior were ascribed to the different interfacial interactions between the chain‐folded surface of the single crystal and the substrate.

     

Thermal degradation mechanism of poly(ethylene succinate) and poly(butylene succinate): Comparative study

Two aliphatic polyesters that consisted from succinic acid, ethylene glycol and butylene glycol, —poly(ethylene succinate) (PESu) and poly(butylene succinate) (PBSu)—, were prepared by melt polycondensation process in a glass batch reactor. These polyesters were characterized by DSC, ¹H NMR and molecular weight distribution. Their number average molecular weight is almost identical in both polyesters, close to 7000 g/mol, as well as their carboxyl end groups (80 eq/10⁶ g). From TG and Differential TG (DTG) thermograms it was found that the decomposition step appears at a temperature 399 °C for PBSu and 413 °C for PESu. This is an indication that PESu is more stable than PBSu and that chemical structure plays an important role in the thermal decomposition process. In both polyesters degradation takes place in two stages, the first that corresponds to a very small mass loss, and the second at elevated temperatures being the main degradation stage. The two stages are attributed to different decomposition mechanisms as is verified from the values of activation energy determined with iso-conversional methods of Ozawa, Flyn, Wall and Friedman. The first mechanism that takes place at low temperatures, is auto-catalysis with activation energy E = 128 and E = 182 kJ/mol and reaction order n = 0.75 and 1.84 for PBSu and PESu, respectively. The second mechanism is nth-order reaction with E = 189 and 256 kJ/mol and reaction order n = 0.68 and 0.96 for PBSu and PESu, respectively, as they were calculated from the fitting of experimental results.     

末端为磷酰胆碱基团的聚丁二酸丁二醇酯的酶促降解和热性能

以聚丁二酸丁二醇酯(PBS)为参照, 研究了酯酶Lipase AY30对亲水磷酰胆碱(PC)基团改性的聚丁二酸丁二醇酯(PBS-PC)的生物降解性能的影响. 结果显示, 在酯酶Lipase AY30作用下, 21 d后PBS的质量损失仅为1.9%, 而PBS-PC的质量损失了9.7%. 相同条件下扣除各自水解引起的质量损失(PBS 1.4%和PBS-PC 6.5%)后, PC亲水基团的引入对聚合物的降解起到了促进作用. 示差扫描量热(DSC)研究结果表明, 改性后的聚合物熔融温度和熔融焓降低, 玻璃化转变温度升高, 表明PC端基的引入降低了PBS的结晶能力, 非晶相结构的增多对聚合物降解有促进作用. 因此PBS-PC有望作为一种新的具有良好生物降解性和生物相容性的高分子材料, 应用于药物控释、基因治疗及组织工程等生物医用材料领域.     

Synthesis of branched poly(butylene succinate): Structure properties relationship

A series of branched poly(butylene succinate) (PBS) were synthesized with several branching agents namely trimethylol propane (TMP), malic acid, trimesic acid, citric acid and glycerol propoxylate. The structure of the branched polymers was analyzed by SEC and ¹H-NMR. The effect of branching agent structure on crystallization was also investigated and played a significant role. Isothermal studies showed that glycerol propoxylate could act as a nucleating agent. By contrast high content of TMP disturbed the regularity of the chain and hindered the crystallization of PBS. From the non-isothermal kinetic study, it was found that glycerol propoxylate increased noticeably the crystallization rate due to the flexible structure of the branching agent. A secondary nucleation was observed with glycerol propoxylate attributed to the crystallization of amorphous fraction included between crystallites formed at the primary crystallization. Chain topology was obtained through rheological investigations and the synthesized polymers showed a typical behavior of a mixture of linear and randomly branched PBS. The incorporation of branches improved the processability of PBS for film blowing application and the modulus and the stress at break of the resulting film were significantly increased.     

离子液体增塑改性玉米淀粉/聚丁二酸丁二醇酯共混材料的结构与性能

为考察离子液体对淀粉/聚丁二酸丁二醇酯(PBS)的作用效果,降低淀粉/PBS的脆性,以离子液体(1-丁基-3-甲基咪唑氯盐[BMIM]Cl)作为增塑改性剂通过熔融共混法制备了玉米淀粉/聚丁二酸丁二醇酯(PBS)共混材料,采用红外光谱(FTIR)、扫描电镜(SEM)、热重分析(TGA)、X射线衍射分析(XRD)及力学性能测试方法研究了[BMIM]Cl对淀粉/PBS共混材料结构和性能的影响.结果表明,[BMIM]Cl能与淀粉/PBS分子发生强相互作用,破坏淀粉/PBS共混物中原有的氢键与结晶结构,增强界面相互作用,改善相容性,进而改变淀粉/PBS共混材料的结构与性能;[BMIM]Cl的加入不影响淀粉/PBS的热稳定性,可使材料玻璃化转变温度(Tg)、结晶温度(Tc)、冷结晶温度(Tcc)及结晶度(Xc)降低.[BMIM]Cl具有显著降低淀粉/PBS脆性的作用,使其断裂伸长率大幅度增加,拉伸强度和弹性模量降低.     

The crystallization behavior of biodegradable poly(butylene succinate) in the presence of organically modified clay with a wide range of loadings

The crystallization behavior of poly(butylene succinate)(PBS) nanocomposites with a wide range of contents of clays was revealed. It was of interest to find that the crystallization rate of PBS was accelerated obviously at relatively low contents of clays; while a retarded crystallization kinetics and a decreased crystallinity of PBS were found in the nanocomposites with higher clay contents. Two interplaying effects existed in the nanocomposites, i.e., a suppression effect of clays on nucleation and a templating effect of clays on crystal growth, were clarified to contribute to this intriguing crystallization behavior.     

Investigation on the gelation behavior of biodegradable poly(butylene succinate) during isothermal crystallization process

The early stage of polymer crystallization may be viewed as physical gelation process,i.e.,the phase transition of polymer from liquid to solid.Determination of the gel point is of significance in polymer processing.In this work,the gelation behavior of poly(butylene succinate)(PBS) at different temperatures has been investigated by rheological method.It was found that during the isothermal crystallization process of PBS,both the storage modulus(G′) and the loss modulus(G″) increase with time,and the rheological response of the system varies from viscous-dominated(G′G″),meaning the phase transition from liquid to solid.The physical gel point was determined by the intersection point of loss tangent curves measured under different frequencies.The gel time(t_c) for PBS was found to increase with increasing crystallization temperature.The relative crystallinity of PBS at the gel point is very low(2.5%-8.5%) and increases with increasing the crystallization temperature.The low crystallinity of PBS at the gel point suggests that only a few junctions are necessary to form a spanning network,indicating that the network is"loosely"connected,in another word,the critical gel is soft.Due to the elevated crystallinity at gel point under higher crystallization temperature,the gel strength S_g increases, while the relaxation exponent n decreases with increasing the crystallization temperature.These experimental results suggest that rheological method is an effective tool for verifying the gel point of biodegradable semi-crystalline polymers.     

Fully biodegradable blends of poly(butylene succinate) and poly(butylene carbonate): Miscibility, thermal properties, crystallization behavior and mechanical properties

Fully biodegradable poly(butylene succinate) (PBS) and poly(butylene carbonate) (PBC) blends were prepared by melt blending. Miscibility, thermal properties, crystallization behavior and mechanical properties of PBS/PBC blends were investigated by scanning electron microscopy (SEM), phase contrast optical microscopy (PCOM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and mechanical properties tests. The SEM and PCOM results indicated that PBS was immiscible with PBC. The WAXD results showed that the crystal structures of both PBS and PBC were not changed by blending and the two components crystallized separately in the blends. The isothermal crystallization data showed that the crystallization rate of PBS increased with the increase of PBC content in the blends. The impact strength of PBS was improved significantly by blending with PBC. When the PBC content was 40%, the impact strength of PBS was increased by nearly 9 times.     

Melting behavior of poly(butylene succinate) during heating scan by DSC

The melting behavior of isothermally crystallized poly(butylene succinate) (PBS) has been investigated using differential scanning calorimetry (DSC) and wide‐angle X‐ray analysis. The samples crystallized between 80°C to 100°C show middle endotherm at the position just before the high exotherm, while the others under 80°C show two endotherms (low and high). From the results of the melting peak vs. crystallization temperature plot, it was suggested that the middle endotherm corresponds to the melting process of the original crystallites and the high endotherms to the melting process of the recrystallized ones. As the DSC heating rate was increased, the peak temperature of the low and middle endotherms increased and that of the high endotherm decreased, indicating that the low endotherm was due to the original crystallites as well as the middle endotherm. Consequently, in the heating scan of PBS, the existence of two kinds of morphologically different crystallites as well as the process of melting and recrystallization becomes evident. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1357–1366, 1999     

Miscibility and Crystallization in Binary Crystalline Blends of Poly(butylene terephthalate) with Poly(butylene terephthalate-e-caprolactone)

Poly(butylene terephthalate)/poly(butylene terephthalate-e-caprolactone) is a new A/AxB1-x binary crystalline blend with intra-molecular repulsion interaction. Using the mean-field binary interaction model, the value of interaction parameter between the butylene terephthalate and caprolactone structural unit was first reported to be 0.305. This blend exhibited different crystallization behavior from a typical homopolymer/copolymer blend, which was carefully investigated by di?erential scanning calorimetry. It was found that poly(butylene terephthalate-e-caprolactone) copolymers have a great effect on the pure poly(butylene terephthalate) chain mobility and poly(butylene terephthalate) crystalline lattice packing. In the meantime, the crystallization of butylene terephthalate segments in copolymers was restricted by the previously formed poly(butylene terephthalate) crystallites. The two constituents for blending can not form a co-crystal in the range of composition even if they have the same butylene terephthalate unit. It can be concluded that longersegments in a copolymer would be beneficial for the formation of a co-crystal in blends.     

Effect of poly(butylene succinate) on the morphology evolution of poly(vinylidene fluoride) in their blends

The effect of PBS on the morphological features of PVDF has been investigated by optical and atomic force microscopies under various conditions.It was found that neat PVDF forms largeγform spherulites with extraordinarily weak birefringence at 170℃.Adding 30%PBS makes PVDF exhibit intrigued flower-like spherulitic morphology.The growth mechanism was explained by the decrease of the supercooling and the materials dissipation.Increasing the PBS content to 70%favors the formation of ring banded spherulites.Temperature dependent experiments verify theα→γphase transition occurs from the junction sites of theαandγcrystals,while starts from the centers ofαspherulites in the blends.Ring banded structures could be observed in neat PVDF,70/30 blend and 30/70 blend when crystallized at 155℃,withoutγcrystals.The band period of PVDFαspherulites increases with crystallization temperature as well as the amount of PBS content.At 140℃,spherulites in neat PVDF lose their ring banded feature,while coarse spherulites consisting of evident lamellar bundles could be found in 30/70 blend.     

Morphology and isothermal crystallization of graphene oxide reinforced biodegradable poly(butylene succinate)

Graphene oxide (GO) was incorporated into poly(butylene succinate) (PBS) via a solution coagulation method to fabricate PBS/GO nanocomposites. Scanning electron microscope and transmission electron microscope observations indicated that GO with exfoliated lamella dispersed in PBS uniformly and showed good interfacial adhesion with the PBS matrix. Differential scanning calorimetry analysis suggested that the crystallization ability of PBS first increased and then decreased with increase in GO content, due to the competitive nucleating effect and confined space effect with addition of exfoliated GO. Isothermal crystallization kinetics investigation showed that the overall crystallization rate of PBS first increased and then decreased with increasing GO content while the crystallization mechanism remained unchanged. Polarized optical microscopy analysis indicated that GO worked as an effective nucleating agent for PBS. X-ray diffraction characterization suggested that incorporation of GO did not change the crystal structure of PBS. Both tensile testing and dynamic mechanical analysis witnessed the reinforcement in mechanical performance of PBS by incorporation of GO.     

Biocomposites based on poly(butylene succinate) and curaua: Mechanical and morphological properties

Biocomposites based on poly(butylene succinate) (PBS) and curaua fibers have been produced by compression molding, and investigated as a function of fiber length and amount. Mechanical tests, water uptake and morphology studies were carried out in order to assess the composite features according to the characteristics of the reinforcing agents. It turns out that the impact and flexural strengths increase with fiber content. Moreover, the fiber length, varying from 1 to 4 cm for the composite reinforced with 20 wt% of fiber, influences impact strength, which is higher for shorter than for longer fibers. However, flexural strength is not greatly influenced by the length of the fibers. Water uptake studies reveal a higher sensitivity of the material to fiber content rather than fiber size. Biocomposites, which are characterized by enhanced mechanical properties as compared to PBS, can have different applications, for example in rigid packaging or interior car parts.