HPTLC–densitometric and HPTLC–MS methods for analysis of flavonoids

HPTLC silica gel plates without and with fluorescence indicator F₂₅₄ in combination with n-hexane–ethyl acetate–formic acid (20:19:1, v/v/v) as a developing solvent were explored for the HPTLC–densitometric and HPTLC–MS/(MSⁿ) analyses of flavonoids. Pre-development of the plates with chloroform–methanol (1:1, v/v) was needed for reliable HPTLC–densitometric analyses of flavonoid aglycones in the whole R_F range, while 2-step pre-development (1^st methanol–formic acid (10:1, v/v), 2^nd methanol), that decreased background signals of formic acid adducts, was required for HPTLC–MS analyses. Optimization with conditioning of the adsorbent layer with water before development and saturation of the twin trough chamber resulted in required decrease of the R_F values of studied flavonoids (flavone, apigenin, luteolin, chrysin, quercetin dihydrate, myricetin, kaempferide, kaempferol, naringenin, pinocembrin).

Detection was performed based on fluorescence quenching (on the plates with F₂₅₄), natural fluorescence and after post-chromatographic derivatization with natural product reagent without or with further enhancement and stabilization of fluorescent zones with polyethylene glycol (PEG 400 or PEG 4000) or paraffin–n-hexane reagents. For all three reagents, drying temperature and time passed after drying influenced the intensity, which was increasing the first 20?min, and the stability (less than 2?h for PEGs and at least 24?h for paraffin–n-hexane) of the standards’ zones.

Optimal wavelengths for densitometric evaluation were selected based on in-situ absorption spectra scanned before and after derivatization and after stabilization. The developed method was tested via analyses of propolis, roasted coffee, rose hip, hibiscus, rosemary and sage crude extracts. To further increase the reliability of the obtained densitometric results HPTLC–MS/(MSⁿ) analyses of all crude extracts were performed. Several phenolic and non-phenolic compounds were tentatively identified.

Some possible interferences with phenolic acids (chlorogenic acid, rosmarinic acid, protocatechuic acid, gallic acid, syringic acid, ellagic acid, trans-cinnamic acid, o-coumaric acid, m-coumaric acid, p-coumaric acid, caffeic acid, ferulic acid, sinapic acid) that are often present in the extracts together with flavonoids were also examined.     

LC–MS–MS Analysis of Mirtazapine in Plasma, and Determination of Pharmacokinetic Data for Rats

A sensitive LC–MS–MS method with electrospray ionization has been developed for analysis of mirtazapine in rat plasma. After addition of diazepam as internal standard, liquid–liquid extraction was used to produce a protein-free extract. Chromatographic separation was achieved on a 150 × 4.6 mm, 5 μm particle, ODS column with 84:16 (v/v) methanol–water containing 0.1% ammonium acetate and 0.01% glacial acetic acid as mobile phase. LC–MS–MS was performed in selected-ion-monitoring (SIM) mode using target fragment ions m/z 195.09 for mirtazapine and m/z 192.80 for the IS. Calibration plots were linear over the range of 0.516–618.8 ng mL^?1. The lower limit of quantification was 0.516 ng mL^?1. Intra-day and inter-day precision were better than 12.6 and 8.8%, respectively. Mean recovery of mirtazapine from plasma was in the range 87.41–90.06%; average recovery was 88.40% (RSD 3.95%). Significant gender differences between mirtazapine pharmacokinetic data were observed in this study.     

LC–MS and UPLC–Quadrupole Time-of-Flight MS for Identification of Photodegradation Products of Aflatoxin B1

UV irradiation of a solution of aflatoxin B₁ in acetonitrile resulted in three major degradation products which have been identified by LC–MS. Accurate masses and proposed molecular formulas of the degradation products—315.0868 (C₁₇H₁₅O₆), 285.0758 (C₁₆H₁₃O₅), and 275.0553 (C₁₄H₁₁O₆)—were obtained with low mass error and high matching property by ultra-performance liquid chromatography–quadrupole time-of-flight mass spectrometry (UPLC–Q-TOF MS). Structural formulas of the photodegradation products, and the degradation pathways leading to the compounds, are proposed on the basis of the molecular formulas and MS–MS spectra. UPLC–Q-TOF MS has been recognized as a powerful analytical tool for qualitative analysis of trace materials and degradation products.     

LC–MS–MS Assay for Simultaneous Quantification of Fexofenadine and Pseudoephedrine in Human Plasma

A rapid, sensitive, and simple HPLC–MS–MS method, with electro-spray ionization and cetirizine as internal standard (IS), has been developed and validated for simultaneous quantification of fexofenadine and pseudoephedrine in human plasma. The analytes were isolated from plasma by solid-phase extraction (SPE) on Oasis HLB cartridges. The compounds were chromatographed on an RP 18 column with a mixture of ammonium acetate (10 mm, pH 6.4) and methanol as mobile phase. Quantification of the analytes was based on multiple reaction monitoring (MRM) of precursor-to-product ion pairs m/z 502 → 466 for fexofenadine, m/z 166 → 148 for pseudoephedrine, and m/z 389 → 201 for cetirizine. The linear calibration range for both analytes was 2–1,700 ng mL⁻¹ (r = 0.995), based on analysis of 0.1 mL plasma. Extraction recovery was 91.5 and 80.88% for fexofenadine and pseudoephedrine, respectively. The method was suitable for analysis of human plasma samples obtained 72 h after administration of a drug containing both fexofenadine and pseudoephedrine.     

Comparison of GC–MS and LC–MS methods for the analysis of antioxidant phenolic acids in herbs

Two methods were developed for the quantitative analysis of phenolic acids in herb extracts. The methods were based on liquid chromatography–time-of-flight mass spectrometry (LC–TOFMS) and gas chromatography–mass spectrometry (GC–MS). The methods were compared in terms of their linearity, repeatability, selectivity, sensitivity and the speed of the analysis. The sensitivity was good for both methods, with limits of detection of <80 ng/ml for most of the compounds. The relative standard deviations (RSD) of the peak areas were on average 7.2% for the LC–TOFMS method and 1.4% for the GC–MS method. Both methods were found to be suitable for the determination of the target analytes, although GC–MS was better suited to the quantitative determination of compounds present at low concentrations.     

Comparison of LC and UPLC Coupled to MS–MS for the Determination of Sulfonamides in Egg and Honey

Determination of ten sulfonamides (SAs) in egg and honey has been compared using column liquid chromatography (LC) and ultra-performance liquid chromatography (UPLC) coupled to tandem mass spectrometry (MS–MS). A liquid–liquid extraction with acetonitrile followed by solid-phase extraction on a Strata-X cartridge was developed for sample preparation. The analytical performance of both methods was compared applying the alternative matrix-comprehensive in-house validation approach using specially designed software InterVal?. Using UPLC the separation time was shortened about 30% reducing the run time by 8 min and a better resolution was achieved compared to LC. Due to higher peak efficiency achieved with UPLC, the decision limit values obtained by both techniques were almost equal (6.61–9.43 μg kg^?1 and 7.25–11.9 μg kg^?1 for UPLC and LC, respectively), despite the fact that in UPLC twice lower sample volumes were injected. Satisfactory and comparable recoveries (80–110%) were obtained by UPLC and LC for all the SAs, except for sulfacetamide by LC and sulfabenzamide by both methods. For a majority of the spiked compounds, UPLC gave significantly better precision.     

Rapid and Sensitive LC–MS–MS Method for the Simultaneous Estimation of Alfuzosin and Dutasteride in Human Plasma

A simple, rapid, specific and sensitive liquid chromatography–tandem mass spectrometric method has been developed and validated for the simultaneous estimation of alfuzosin and dutasteride in human plasma. Both alfuzosin and dutasteride were extracted from human plasma by solid-phase extraction using terazosin and finasteride as the internal standards for alfuzosin and dutasteride, respectively. Chromatographic separation of analytes and their respective internal standards was carried out using a Hypurity C18 (50 × 4.6 mm i.d., 5 μm particle size) column followed by detection using an applied biosystems API 5000 mass spectrometer with a UPLC as the front end. The method involves a rapid solid phase extraction from plasma, simple isocratic chromatographic conditions and mass spectrometric detection in the positive ionization mode using multiple reactions monitoring that enables detection down to low nanogram levels with a total run time of 2.5 min only. The method was validated over a range of 0.25–20.0 ng mL^?1 for alfuzosin and 0.1–10.0 ng mL^?1 for dutasteride. The absolute recoveries for alfuzosin (65.57%), dutasteride (103.82%), terazosin (69.38%) and finasteride (102.25%) achieved from spiked plasma samples were consistent and reproducible. Acceptable precision and accuracy were obtained for concentrations over the standard curve ranges. Due to the short run time of 2.5 min it was possible to analyze a throughput of more than 180 human plasma samples per day. The validated method can be successfully used to analyze human plasma samples for application in pharmacokinetic, bioavailabilty or bioequivalence studies. As an example the application of this validated method to a bioequivalence study is also illustrated.     

Advantages of LC–MS–MS compared to LC–MS for the determination of nitrofuran residues in honey

In the framework of developing analyses for exogenous contaminants in food matrices such as honey, we have compared data obtained by high-performance liquid chromatography coupled with mass spectrometry (LC–MS) to those provided by high-performance liquid chromatography and tandem mass spectrometry (LC–MS–MS). Initial results obtained with LC–MS showed that the technique lacked selectivity, which is why the method was validated by LC–MS–MS. This method involves a solid-phase extraction (SPE) of nitrofuran metabolites and nitrofuran parent drugs, a derivatization by 2-nitrobenzaldehyde for 17 h, and finally a clean-up by SPE. The data obtained show that the limits of detection varied between 0.2 and 0.6 μg kg⁻¹ for the metabolites and between 1 and 2 μg kg⁻¹ for nitrofuran parent drugs. The method was applied to different flower honeys. The results showed that nitrofurans (used as antibiotics) are consistently present in this matrix, the predominant compound being furazolidone. Figure Working bees     

An LC–MS–MS Method for the Simultaneous Quantitation of Acyclovir and Valacyclovir in Human Plasma

A simple, sensitive and selective LC–MS–MS method has been developed for the simultaneous determination of acyclovir and valacyclovir in human plasma. Acyclovir and valacyclovir in plasma were concentrated by solid phase extraction and chromatographed on a C18 column using a mobile phase of 0.1% formic acid: methanol (30:70% v/v). The method was validated over a linear range of 47–10,255 and 5–1,075 ng mL^?1 for acyclovir and valacyclovir respectively. The LOQs were 47.6 and 5.0 ng mL^?1. The validated method was applied for the quantitation of acyclovir and valacyclovir from plasma samples in a pharmacokinetic study.     

Assessment of robustness for an LC–MS–MS multi-method by response-surface methodology,and its sensitivity

Sensitive, fast, and robust multi-methods are required for the surveillance of the contamination of the drinking water resources by organic trace contaminants. In the present work an alternative strategy using response surface methodology (RSM) was applied for assessment of the robustness of a LC–MS–MS multi-method. The analytical method was optimised by means of a central composite design including six design variables. The main object was to evaluate the significance of the RSM results with regard to robustness and to the sensitivity to the mass transitions used in the multi-method. The robustness of the multi-method was represented by the curvature of the calculated response surfaces for the response value R. Furthermore, it could be demonstrated that the RSM was sensitive to changes made to the investigated data set and was able to clearly indicate the fraction of substances, which met the defined criterion for signal-to-noise-ratio.     

LC–DAD and LC–ESI–MS Chromatographic Fingerprinting and Quantitative Analysis for Evaluation of the Quality of Huang-Lian-Jie-Du-Tang

LC–DAD coupled with electrospray tandem mass spectrometry (LC–ESI–MS–MS) has been used to evaluate the quality of the traditional Chinese medicine Huang-Lian-Jie-Du-Tang (HLJDT). Twenty-five chromatographic peaks were obtained from a C₁₈ analytical column by gradient elution with acetonitrile and formate buffer (containing 0.5% formic acid) at a flow rate of 1.0 mL min^?1. The linearity, precision, and accuracy of the data obtained were acceptable. Thirteen components were identified by ESI–MS, and seven of these were quantitatively analyzed by LC–DAD. The method was used to analyze ten batches of HLJDT, and both chromatographic fingerprints and quantitative data were used to evaluate the quality of the HLJDT. It was concluded that this LC–DAD–ESI–MS method enables more fully validated and complete evaluation and monitoring of the quality of HLJDT.     

Packed in-tube SPME–LC–MS/MS for fast and straightforward analysis of cannabinoids and metabolites in human urine

Cannabinoids are pharmacologically active compounds present in cannabis plants, which have become important research topics in the modern toxicological and medical research fields. Not only is cannabis the most used drug globally, but also cannabinoids have a growing use to treat a series of diseases. Therefore, new, fast, and efficient analytical methods for analyzing these substances in different matrices are demanded. This study developed a new packed-in-tube solid-phase microextraction (IT-SPME) method coupled to liquid chromatography with tandem mass spectrometry (LC–MS/MS), for the automated microextraction of seven cannabinoids from human urine. Packed IT-SPME microcolumns were prepared in (508 µm i.d. × 50 mm) stainless-steel hardware; each one required only 12 mg of sorbent phase. Different sorbents were evaluated; fractional factorial design 2⁴⁻¹ and a central composite design were employed for microextraction optimization. Under optimized conditions, the developed method was a fast and straightforward approach. Only 250 µl of urine sample was needed, and no hydrolysis was required. The sample pretreatment included only dilution and centrifugation steps (8 min), whereas the complete IT-SPME–LC–MS/MS method took another 12 min, with a sample throughput of 3 samples h⁻¹. The developed method presented adequate precision, accuracy and linearity; R² values ranged from 0.990 to 0.997, in the range of 10–1000 ng ml⁻¹. The lower limits of quantification varied from 10 to 25 ng ml⁻¹. Finally, the method was successfully applied to analyze 20 actual urine samples, and the IT-SPME microcolumn was reused over 150 times.     

HS–SPME–GC–MS for the Quantitation and Chiral Characterization of Camphor and Menthol in Creams

A GC–MS method is proposed for the analysis of camphor and menthol in “over-the-counter” (OTC) products. Sample preparation was achieved by head-space solid phase microextraction using a polydimethylsiloxane fibre. GC analysis was performed using a Phenomenex ZB-5 column and a temperature program was adopted. The method was validated by studying linearity (range 0.1–15.0% w/w), accuracy, reproducibility and sensitivity. Applications were directed to the determination of the active ingredients in four different OTC-products; the mean recoveries were in the ranges 91.30–99.74% and 94.34–102.89% for camphor and menthol, respectively and the LOD was in the order of 0.005% (w/w). Other important terpenoids (α- and β-pinene, 1,8-cineole, menthone, isomenthone, α-terpineole, t-cinnamaldehyde, eugenole) were identified by mass spectra and Kovats retention indices and quantified by peak area normalization to 100%. Further information for a comprehensive characterization of the OTC-products was achieved by the GC chiral analysis on a Cyclosil B capillary column.     

A Comparison of Three Methods of Extraction for the Determination of Polyphenols and Organic Acids in Tobacco by UPLC–MS–MS

Matrix solid phase dispersion (MSPD), ultrasonic extraction followed by a solid phase extraction (USE–SPE) and reflux extraction (REFLUX) were studied for the analysis of polyphenols and organic acids in tobacco. The analysis was by ultra-high performance liquid chromatography tandem mass spectrometry (UPLC–MS–MS). The multi-mode support sorbent Zirconia/AA12S50 in MSPD is more suitable for the extraction of tobacco polyphenols than conventional silica or C18 silica. Although the matrix effect of USE–SPE is slightly stronger than MSPD and REFLUX for most target compounds, it gave higher extraction capacity, recoveries and sensitivity.     

Complementary use of GCxGC–TOF–MS and statistics for differentiation of variety in biosolid samples

Formation of biosolid cakes, which are one of the main wastes generated in wastewater treatment plants, is connected with emission of many hazardous chemical compounds, including odoriferous ones. To optimize particular processes of biosolid cake processing, it is necessary to assess chemical composition of the gas mixtures containing the compounds released from the cakes. The paper proposes application of two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GCxGC–TOF–MS) to identification of the compounds released from four main types of biosolid cakes and to quantitative determination of the markers characteristic for particular types of cake. Based on the analysis of variance, the following compounds, which could be potential markers of the investigated biosolid cakes, were selected: 1-propanol, 2-hexanone, toluene, o-xylene, p-xylene, and organosulfur compounds (methanethiol, ethanethiol, dimethyl sulfide, dimethyl disulfide, and diethyl disulfide). Theoretical odour concentrations of four investigated types of biosolid cakes were determined, based on measured concentrations and olfactory thresholds of the aforementioned compounds. The highest concentration was revealed for a primary cake (634 ou/m³), whereas the lowest concentration was found for an excess cake (136 ou/m³) (ou/m³—odour unit per m³; one odour unit is equivalent to collective odour threshold of odorants mixture present in 1 m³). The proposed methodology allows preliminary evaluation of the odour nuisance markers connected with formation of the biosolid cakes, without a need for quantitative analysis of all determined compounds.

Graphical abstract

Open image in new window

     

Investigation of Euphrasia rostkoviana Hayne Using GC–MS and LC–MS

Gas and liquid chromatography coupled with mass spectrometry was applied to solve difficulties and reinvestigate the serious matrix problems affecting analysis of the active compounds in Euphrasia rostkoviana Hayne. The main groups of compounds were obtained by extracting the herb stepwise with n-hexane, chloroform, ethyl acetate and methanol. Polyamide column chromatography facilitated further separation. Phenolic/flavonoid- and terpenoid-type molecules were studied by GC–MS, HPLC and LC–MS–MS. The β-sitosterol content of the herb was determined by gas chromatography with flame ionisation detection (GC-FID). Caffeic acid, chlorogenic acid, coumaric acid and flavonoid glycosides of apigenin, luteolin, rhamnetine (hexoside), kaempferol (both hexoside and rutinoside) and quercetin (rutinoside) were identified in the fractions of the methanolic extract.     

LC–MS–MS Determination of Stabilizers and Explosives Residues in Hand-Swabs

The contribution of explosive trace detection in samples from the hands of suspects has been fundamental in several forensic cases involving terrorists. This paper describes a method for the rapid extraction and unequivocal confirmation of some high potential explosives (trinitrotoluene, cyclotrimethylenetrinitramine, pentaerythritol tetranitrate, nitroglycerin) and two stabilizer (diphenylamine and ethylcentralite) residues in hand-swabs using liquid chromatography–tandem mass spectrometry. The extraction procedure of the analytes from the swabs is realized by solvent elution and the extracts are directly analyzed. Recoveries from spiked swabs range from 78 to 96%; the limits of quantification are between 0.04 and 1.8 ng injected and the inter-day method precision is less than 15%. The developed procedure was applied to the detection of explosives traces in samples after handling tests.