变分法在含边裂纹正交各向异性板中的应用

文中给出了含边裂纹正交各向异性板问题的特征函数展开式，然后利用变分法及边值条件确定展开式中的未知系数，从而可求得裂端应力强度因子。该方法即可应用于应力边界值和位移边界值问题，又适应混合边界值问题。数值计算结果证实了该方法的有效性。     

线弹性多材料接头端部应力奇异性特征分析

文章研究多材料接头并计算其应力奇性特征.通过引入接头端部位移场的渐近级数展开式,将应力平衡方程转化为关于奇性指数的特征常微分方程组,由插值矩阵法求解获得多材料接头应力奇性指数以及相应的位移特征函数,与已有的结果对照证实了本文方法的有效性.本文计算结果还表明了多材料接头结构在不同材料粘结界面处位移场特征函数的一阶导数发生了突变,导致应力场在接头粘结界面处不连续.     

多层横观各向同性圆柱壳的三维弹性理论解

本文从三维弹性理论出发,用特征函数法研究多层横观各向同性圆柱壳的轴对称问题.把位移和应力分量的齐次解表达成特征函数展开式,并把特解部分用Fourier级数表示.以多层圆柱壳的内、外柱面作为齐次边界,同时考虑层间的连续条件,推导出问题的特征方程并用Muller法求解.文中运用传递矩阵技术处理多层问题,并用边界型最小二乘配点法处理端部边界条件.作为实例,对双层圆柱壳作了数值计算.     

含层间短裂纹层合板的解析－分区变分解法

将层板横截面分为含裂纹区与不含裂纹区，在每一区内，根据夏变函数理论与特征函数展开法，得到了各自区内满足所有支配方程、裂纹表面边界条件与层间连续条件的位移与应力的特征展开式，然后利用分区广义变分原理满足裂纹表面边界以外的边界条件以及两区之间的交界条件，并由此求得奇异场控制量（广义应力强度因子）。     

含层间短裂纹层合板的解析－分区变分解法

将层板横截面分为含裂纹区与不含裂纹区，在每一区内，根据夏变函数理论与特征函数展开法，得到了各自区内满足所有支配方程、裂纹表面边界条件与层间连续条件的位移与应力的特征展开式，然后利用分区广义变分原理满足裂纹表面边界以外的边界条件以及两区之间的交界条件，并由此求得奇异场控制量（广义应力强度因子）。     

含层间长裂纹的对称正交层合板的角析—分区广义变分解法

本文首先将层板横截面分为含裂尖区、韧带区以及裂纹区等三个区域，用复变函数理论与特征函数层开法，得到了各区内满足所有基本方程、裂纹表面边界条件与层间连续条件的位移与应力的特征展开式，然后利用分区广义变分原理满足裂纹表面边界以外的边界条件以及各区之间的交界条件，并由此求得奇异场控制量。     

含层间长裂纹的对称正交层合板的解析－分区广义变分解法

本文首先将层板横截面分为含裂尖区、韧带区以及裂纹区等三个区域，用复变函数理论与特征函数展开法，得到了各区内满足所有基本方程、裂纹表面边界条件与层间连续条件的位移与应力的特征展开式。然后利用分区广义变分原理满足裂纹表面边界以外的边界条件以及各区之间的交界条件，并由此求得奇异场控制量（广义应力强度因子）。     

用泰勒级数法求解横观各向同性球壳的轴对称弯曲问题

本文采用泰勒级数法分析横观各向同性球壳轴对称弯曲问题。将位移沿厚度方向展开成泰勒级数,利用三维弹性方程求得级数中的各阶导数。对于边值问题,用特征函数法满足球面齐次边界条件,并用最小二乘配点法满足端部条件。     

特征函数展开解法的研究

以常微分方程的理论为基础,利用新的对偶变量、对偶微分矩阵和正交关系,以单连续坐标弹性体系为例,建立了与弹性力学求解新体系平行的特征函数展开解法．并将正交关系应用于可对角化边界条件的处理,实现了求解待定系数方程组的解耦,求得问题的显式封闭解．     

薄板理论的正交关系及其变分原理

利用平面弹性与板弯曲的相似性理论，将弹性力学新正交关系中构造对偶向量的思路推广到 各向同性薄板弹性弯曲问题，由混合变量求解法直接得到对偶微分方程并推导了对应的变分 原理. 所导出的对偶微分矩阵具有主对角子矩阵为零矩阵的特点. 发现了两个独立的、对称 的正交关系，利用薄板弹性弯曲理论的积分形式证明了这种正交关系的成立. 在恰当选择对 偶向量后，弹性力学的新正交关系可以推广到各向同性薄板弹性弯曲理论.     

Stochastic boundary element method in elasticity

The stochastic boundary element method is developed to analyze elasticity problems with random material and/or geometrical parameters and randomly perturbed boundaries. Based on the first-order Taylor series expansion, the boundary integration equations concerning the mean and deviation of the displacements are derived, respectively. It is found that the randomness of material parameters is equivalent to a random body force, so the mean and covariance matrices of unknown boundary displacements and tractions can be obtained. Furthermore, the mean and covariance of displacements and stresses at inner points can also be obtained. Numerical examples show that the proposed stochastic boundary element method gives satisfactory solutions, as compared with those obtained by theoretical analysis or other numerical methods. The project supported by the National Natural Science Foundation of China and the State Education Commission Foundation of China     

Saint-Venant problem for solids with helical anisotropy

We discuss the solution of Saint-Venant’s problem for solids with helical anisotropy. Here the governing relations of the theory of elasticity in terms of displacements were presented using the helical coordinate system. We proposed an approach to construct elementary Saint-Venant solutions using integration of ordinary differential equations with variable coefficients in the case of a circular cylinder with helical anisotropy. Elementary solutions correspond to problems of extension, of torsion, of pure bending and of bending of shear force. The solution of the problem is obtained using small parameter method for small values of twist angle and numerically for arbitrary values. Numeric results correspond to problems of extension–torsion. Dependencies of the stiffness matrix (in dimensionless form) on angle between the tangent to the helical coil and the axis of the cylinder corresponding to stiffness on stretching and torsion are illustrated graphically for different values of material and geometrical parameters.     

中厚板统计分析的随机边界元法

本文建立了分析含随机材料参数并具厚度不均匀性的中厚板问题的随机边界元法,基于Taylor级数展开技术,分析和到广义位移的均值和一阶偏差的积分方程,其中将材料参数的随机性和厚度的不均匀性作为等效荷载处理,从而得到广义边界位移或面力的均值和协方差,并进一步求出部点广义位移和内力的均值和协方差,最后用本文方法计算了两个数例,并对所得结果进行了分析,探讨。     

Numerical solutions of two-dimensional anisotropic crack problems

A complete set of series form solutions of stress and displacement functions, including all higher order terms, around the crack tip for anisotropic crack problems have been newly derived by eigenfunction expansion approach. The analytical solutions of displacement functions were classified into four cases with respect to different types of complex parameters and different corresponding physical meanings. By employing these displacement functions as global interpolation functions, fractal two-level finite element method (F2LFEM) was applied to evaluate the stress intensity factors (SIFs) for various kinds of anisotropic crack problems. In the method of F2LFEM, the infinite number of nodal displacements was transformed to a small set of generalized coordinates by fractal transformation technique. New element matrices need not be generated and the singular numerical integration was avoided completely. Numerical examples of the four cases were studied and high accurate results of SIFs were obtained.     

饱和土埋置力源的三维动力Lamb问题解答

基于一组弹性土波动方程，应用Fourier级数展开和Hankel积分变换，得到了三维问题饱和土骨架与孔隙水的应力及位移分量在变换域内的积分形式通解．考虑地基表面透水情形，由边界条件导出了半空间饱和土体在埋置力源作用下的三维动力Lamb问题的解答．给出了埋置水平力作用下地基表面竖向位移、径向位移及周向位移的数值解．该研究为运用边界元法求解饱和地基的动力响应课题奠定了理论基础．     

Equilibrium problems of spherically isotropic bodies

In this paper the displacements and body-forces are resolved,respectively,and the3-dimensional equilibrium problems of spherically isotropic bodies with body-forces aretransferred into a two-order differential equation and a four-order differential equation.Based on the series expansion technique and properties of spherical functions,the seriessolutions are obtained for the corresponding homogeneous equations,which can be adaptedto solve equilibrium problems of whole spheres or spherical shells.The special solution for arevolving sphere is also given.     

A continuum model for size-dependent deformation of elastic films of nano-scale thickness

Ultra-thin elastic films of nano-scale thickness with an arbitrary geometry and edge boundary conditions are analyzed. An analytical model is proposed to study the size-dependent mechanical response of the film based on continuum surface elasticity. By using the transfer-matrix method along with an asymptotic expansion technique of small parameter, closed-form solutions for the mechanical field in the film is presented in terms of the displacements on the mid-plane. The asymptotic expansion terminates after a few terms and exact solutions are obtained. The mid-plane displacements are governed by three two-dimensional equations, and the associated edge boundary conditions can be prescribed on average. Solving the two-dimensional boundary value problem yields the three-dimensional response of the film. The solution is exact throughout the interior of the film with the exception of a thin boundary layer having an order of thickness as the film in accordance with the Saint-Venant’s principle.     

Torsion of cylindrical bodies with varying strain properties

We analyze the results of experimental studies of effective strain properties of damaged, porous, and other inhomogeneous materials and study the main laws of their behavior under strain. We consider the possible versions of constitutive relations taking account of the dependence of the properties of the media under study on the loading conditions or the strain conditions and the relations between the shear and bulk strains. Since the traditional statement of the torsion problems for bodies with such properties cannot be used, we analyze the strain consistency equations and the relations between the strains and displacements in cylindrical coordinates and obtain expressions for the displacements in an appropriate generalized form, which can be used not only for the torsion problems. We study how the distributions of displacements, strains, and stresses under torsion depend on the parameter characterizing the susceptibility of the material strain properties to variations in the stress state type. We show that, in the case of torsion of a cylinder of circular cross-section, there is no deplanation of the cross-section, just as in the classical solution, but the distributions of displacements, strains, and stresses significantly differ from the well-known solutions.     

非线性粘弹性平面问题的数学模型及其失记效应

本文以位移为基本未知量,利用非线性粘弹性力学中的Leaderman本构关系和线性几何假设,建立了非线性粘弹性平面问题的数学模型;在粘弹性泊松比为常数的情况下,利用Titchmarsh定理和Laplace变换法证明了非线性粘弹性平面问题与非线性弹性平面问题之间存在着某些对应关系,对应关系为粘弹性问题的求解提供了一种新的思路,利用这些关系可直接从相应弹性问题获得粘弹性平面问题的部分响应,与传统的时域有限差分法相比,计算时间明显缩短,另外,对应关系也揭示了粘弹性结构的失记效应,即结构的部分响应仅与外部输入的现时值有关,而与其历史无关。     

Strain gradient elasticity theory for antiplane shear cracks. Part I: Oscillatory displacements

Solutions of crack problems for a strain gradient elastic theory whose crack opening displacements are monotonic rather than oscillatory in profile are examined in this (portion of a two-part) paper. A new analytical solution having a simple form is also obtained through the introduction of parabolic cylindrical coordinates and expansion of the imposed displacement along the crack surfaces in terms of orthogonal polynomials. Uniqueness of solution is also discussed, as well as finite-difference approximations of the governing equations for use in numerical solutions of boundary value problems.