Visible light photocatalytic decomposition of 2-naphthol by anodic-biased alpha-Fe2O3 film

Transparent alpha-Fe2O3 films with varying film thickness were formed on a SnO2 transparent conducting film-coated glass substrate by metal organic deposition. Under anodic-biased conditions, the alpha-Fe2O3 film showed a high photocatalytic activity for the decomposition of 2-NAP with visible light irradiation. The alpha-Fe2O3 is transformed to inactive hydroxide as the reaction proceeds, while the activity of alpha-Fe2O3 is almost maintained in acetonitrile.     

Facile route to alpha-FeOOH and alpha-Fe2O3 nanorods and magnetic property of alpha-Fe2O3 nanorods

alpha-FeOOH nanorods with diameters of 15-25 nm and lengths up to 170-300 nm were synthesized in high yield via a facile and template-free hydrothermal method at low temperature. After calcining the as-synthesized alpha-FeOOH at 250 degrees C for 2 h, we could obtain alpha-Fe2O3 nanorods. Interestingly, the as-obtained alpha-Fe2O3 nanorods exhibited weakly ferromagnetic characteristics at low temperature and superparamagnetic property at room temperature, which is different from the behavior of the corresponding bulk material.     

Excited carrier dynamics of alpha-Cr2O3/alpha-Fe2O3 core-shell nanostructures

In this work alpha-Cr(2)O(3)/alpha-Fe(2)O(3) core-shell polycrystalline nanostructures were synthesized by using alpha-Cr(2)O(3) nanoparticles as seed crystals during aqueous nucleation. The formation of alpha-Fe(2)O(3) polycrystallites on alpha-Cr(2)O(3) surfaces was confirmed by X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray analysis. The excited-state relaxation dynamics of as-grown core-shell structures and "pure" alpha-Fe(2)O(3) particles of the same size were measured with femtosecond transient absorption spectroscopy. The results show the carrier lifetimes decay within a few picoseconds regardless of sample. This is likely due to fast recombination/trapping of carriers to defects and iron d-states.     

Quasicubic alpha-Fe2O3 nanoparticles with excellent catalytic performance

Uniform quasicubic alpha-Fe(2)O(3) nanoparticles enclosed by six identical {110} planes were synthesized by a simple solvothermal method. TEM investigations revealed that they were formed through oriented attachment of primary nanocrystals assisted by Ostwald ripening, and PVP surfactant played an important role in control over the final morphology of the products. These quasicubic nanoparticles could catalyze oxidation of almost 100% CO at a temperature of 230 degrees C, much lower than those of nanophases with flowerlike, hollow, or other forms of irregular external morphologies having various crystal planes exposed to the gas, indicating that the external morphology and especially the exposure crystal planes of alpha-Fe(2)O(3) nanocatalyst affect the catalytic activity more significantly than the traditionally accepted factors (such as high BET surface area, hollow structure, etc.) do for CO catalytic oxidation.     

Insights into the oxidation and decomposition of CO on Au/alpha-Fe2O3 and on alpha-Fe2O3 by coupled TG-FTIR

CO oxidation and decomposition behaviors over nanosized 3% Au/alpha-Fe2O3 catalyst and over the alpha-Fe2O3 support were studied in situ via thermogravimetry coupled to on-line FTIR spectroscopy (TG-FTIR), which was used to obtain temperature-programmed reduction (TPR) curves and evolved gas analysis. The catalyst was prepared by a sonication-assisted Au colloid based method and had a Au particle size in the range of 2-5 nm. Carburization studies of H 2-prereduced samples were also made in CO gas. According to gravimetry, for the 3% Au/alpha-Fe2O3 catalyst, there were three distinct stages of CO interaction with the Au catalyst but only two stages for the catalyst support. At low temperatures (相似文献   

Growth and magnetic properties of oriented alpha-Fe2O3 nanorods

alpha-Fe(2)O(3) nanorods have been deposited on Si substrates using the metal-organic chemical vapor deposition method. Structural analyses indicated that alpha-Fe(2)O(3) nanorods are preferentially oriented in the [104] direction on Si(100) substrates, and the nanorod possesses the single-crystalline structure. MFM image suggests that a spin domain is formed in the alpha-Fe(2)O(3) nanorod. Anisotropic magnetic property of the alpha-Fe(2)O(3) nanorods, i.e., the discrepancy of the saturation magnetization, is observed from SQUID measurements when the magnetic field are applied parallel and perpendicular to the substrate. A lower Morin temperature than that of the macroscopically crystalline hematite is observed when the magnetic field is applied parallel to the substrate.     

High-mass loading Bi2O2CO3 nanoflakes with crystalline structure transition as cathode for alkaline zinc battery

Journal of Solid State Electrochemistry - Rechargeable aqueous alkaline zinc batteries (AZBs) have received extensive attention due to their cost-effectiveness and environmental friendliness....     

New benchmark for water photooxidation by nanostructured alpha-Fe2O3 films

Thin films of silicon-doped Fe2O3 were deposited by APCVD (atmospheric pressure chemical vapor deposition) from Fe(CO)5 and TEOS (tetraethoxysilane) on SnO2-coated glass at 415 degrees C. HRSEM reveals a highly developed dendritic nanostructure of 500 nm thickness having a feature size of only 10-20 nm at the surface. Real surface area determination by dye adsorption yields a roughness factor of 21. XRD shows the films to be pure hematite with strong preferential orientation of the [110] axis vertical to the substrate, induced by silicon doping. Under illumination in 1 M NaOH, water is oxidized at the Fe2O3 electrode with higher efficiency (IPCE = 42% at 370 nm and 2.2 mA/cm2 in AM 1.5 G sunlight of 1000 W/m2 at 1.23 VRHE) than at the best reported single crystalline Fe2O3 electrodes. This unprecedented efficiency is in part attributed to the dendritic nanostructure which minimizes the distance photogenerated holes have to diffuse to reach the Fe2O3/electrolyte interface while still allowing efficient light absorption. Part of the gain in efficiency is obtained by depositing a thin insulating SiO2 interfacial layer between the SnO2 substrate and the Fe2O3 film and a catalytic cobalt monolayer on the Fe2O3 surface. A mechanistic model for water photooxidation is presented, involving stepwise accumulation of four holes by two vicinal iron or cobalt surface sites.     

Facile fabrication of long alpha-Fe(2)O(3), alpha-Fe and gamma-Fe(2)O(3) hollow fibers using sol-gel combined co-electrospinning technology

Long alpha-Fe(2)O(3) hollow fibers have been prepared through a facile sol-gel combined co-electrospinning technique using ferric citrate as precursor, and alpha-Fe and gamma-Fe(2)O(3) hollow fibers have been obtained by reduction and reoxidation at different conditions. The outer diameter of the as-prepared hollow fibers is 0.5-5 microm with wall thickness of 200-800 nm. The obtained tubular fibers were characterized by thermal gravimetric (TG), FT-IR spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman techniques. In addition, magnetic properties of alpha-Fe and gamma-Fe(2)O(3) hollow fibers have also been investigated.     

Interparticle interactions in agglomerates of alpha-Fe2O3 nanoparticles: influence of grinding

We have chemically prepared a sample of antiferromagnetic alpha-Fe2O3 nanoparticles by a gel-sol technique. M?ssbauer spectra of the as-prepared sample showed that superparamagnetic relaxation was suppressed due to strong magnetic interparticle interactions even at room temperature. However, subsequent grinding of the sample by hand in a mortar for some minutes resulted in fast superparamagnetic relaxation of some of the particles. The effect was even more dramatic if the alpha-Fe2O3 powder was ground for a longer time or together with nonmagnetic eta-Al2O3 nanoparticles. Similar effects were found after low-energy ball milling. Thus it is found that the agglomeration of the nanoparticles during preparation under wet conditions results in strong magnetic interparticle interaction, but a relatively gentle mechanical treatment is sufficient to break up the agglomerates, resulting in much weaker interactions. We show that these effects can also be seen when a soil sample containing magnetic nanoparticles is ground.     

Surfactant-assisted synthesis of alpha-Fe2O3 nanotubes and nanorods with shape-dependent magnetic properties

Alpha-Fe(2)O(3) nanorods and nanotubes have been synthesized and characterized by high-resolution transmission electron microscopy and X-ray diffraction. By means of different surfactant assistance, the high-quality one-dimensional products were obtained, respectively, with aqueous butanol solution as the solvent and carbamide as the base, giving rise to single-crystalline products at 150 degrees C. The formation mechanism has been presented. Significantly, the magnetic investigations show that the magnetic properties are strongly shape-dependent; i.e., the nanorods have a Morin transition at 166 K from canted antiferromagnetic state to antiferromagnetic state, while the nanotubes exhibit a three-dimensional magnetic ordering above 300 K that has been attributed to the presence of small particles in a few regions of the tubes.     

Doping gamma-Fe(2)O(3) nanoparticles with Mn(III) suppresses the transition to the alpha-Fe(2)O(3) structure

Here we report on a mixed oxide system, gamma-Fe2O3 nanoparticles doped with Mn(III), where the transition from the cubic to the more stable hexagonal alpha-Fe2O3 structure is suppressed. When amorphous Fe2O3 is heated at 300 degrees C for 3 h, ferrimagnetic gamma-Fe2O3 is observed as the sole product. On the other hand, when the temperature is raised to 500 degrees C, one observes only antiferromagnetic alpha-Fe2O3 as the product. However, upon doping with 8.5 wt % Mn(III), the amorphous nanoparticles crystallized to mainly the gamma-Fe2O3 matrix after heating at 500 degrees C for 3 h, and need to be heated to >650 degrees C for the complete transition to the alpha-Fe2O3 structure to take place.     

Charge transport in metal oxides: a theoretical study of hematite alpha-Fe2O3

Transport of conduction electrons and holes through the lattice of alpha-Fe(2)O(3) (hematite) is modeled as a valence alternation of iron cations using ab initio electronic structure calculations and electron transfer theory. Experimental studies have shown that the conductivity along the (001) basal plane is four orders of magnitude larger than the conductivity along the [001] direction. In the context of the small polaron model, a cluster approach was used to compute quantities controlling the mobility of localized electrons and holes, i.e., the reorganization energy and the electronic coupling matrix element that enter Marcus' theory. The calculation of the electronic coupling followed the generalized Mulliken-Hush approach using the complete active space self-consistent field method. Our findings demonstrate an approximately three orders of magnitude anisotropy in both electron and hole mobility between directions perpendicular and parallel to the c axis, in good accord with experimental data. The anisotropy arises from the slowness of both electron and hole mobilities across basal oxygen planes relative to that within iron bilayers between basal oxygen planes. Interestingly, for elementary reaction steps along either of the directions considered, there is only less than one order of magnitude difference in mobility between electrons and holes, in contrast to accepted classical arguments. Our findings indicate that the most important quantity underlying mobility differences is the electronic coupling, albeit the reorganization energy contributes as well. The large values computed for the electronic coupling suggest that charge transport reactions in hematite are adiabatic in nature. The electronic coupling is found to depend on both the superexchange interaction through the bridging oxygen atoms and the d-shell electron spin coupling within the Fe-Fe donor-acceptor pair, while the reorganization energy is essentially independent of the electron spin coupling.     

Synthesis of single-crystal beta-Ni(OH)2 nanodisks and alpha-Fe2O3 nanocrystals in C2H5OH-NaOH-NH3 x H2O system

Circular beta-Ni(OH)2 nanodisks and rhombohedral and hexagonal alpha-Fe2O3 nanocrystals were prepared using the C2H5OH-NaOH-NH3 x H2O system under hydrothermal conditions. The C2H5OH/H2O solvent is an appropriate one for the growth of these two materials with their thermodynamically favored morphologies. The possible formation mechanisms are discussed.     

The synthesis and magnetic properties of nanosized hematite (alpha-Fe2O3) particles

The synthesis of nanosized superparamagnetic hematite particles by dissolving ferric salts in hydrochloric acid and heating at 100 degrees C is described. A hydrolysis reaction causes the formation of hematite particles. The influence of the sequence of additions on the resulting precipitates was studied using TEM and XRD. The magnetic behavior was characterized by magnetization measurements. It was found that small changes in the reaction conditions led to remarkable changes in final size and shape of the hematite crystallites. A well-defined subrounded morphology and an average diameter of 41 nm were obtained for superparamagnetic hematite particles. This is the largest size reported thus far for superpara-magnetic hematite particles.     

Homogeneous Precipitation of Uniform alpha-Fe2O3 Particles from Iron Salts Solutions in the Presence of Urea

Uniform alpha-Fe2O3 particles within the nanometer range (100-300 nm) have been obtained by precipitation of iron (III) perchlorate in the presence of urea. Different morphology, from spheres to ellipsoidal particles with axial ratio up to approximately 10, was obtained by adding to the initial solution increasing amounts of phosphate anions up to 7 x 10(-3) M. The main targets of this work are the reduction in particle size and precipitation time and the increase of the particles axial ratio, keeping a narrow particle size distribution, in comparison to other methods previously developed to obtain homogenous alpha-Fe2O3 particles. A detailed analysis of the reaction products and a systematic study of the influence of the different precipitation conditions on the characteristics of the resulting particles have been carried out. Finally, some information on the formation mechanism of the ellipsoidal hematite particles in the iron (III) salt-urea-phosphate system is also given. Copyright 1999 Academic Press.     

Reversible film formation from nano-sized PNIPAM particles below glass transition

Reversible film formation process from nano-sized Poly(N-isopropylacrylamide) (PNIPAM) microgel particles were studied during heating-cooling cycles at various rates. Photon transmission technique was used and transmitted photon intensity I _tr was monitored during heating–cooling cycles. The increase and decrease in I _tr during heating and cooling was explained with the void closure and void reconstruction processes, and the corresponding activation energies were measured. It was observed that PNIPAM microgels required less energy during reconstruction of voids than their closure.     

Visible light-induced water oxidation on mesoscopic alpha-Fe2O3 films made by ultrasonic spray pyrolysis

Alpha-Fe(2)O(3) films having a mesoscopic leaflet type structure were produced for the first time by ultrasonic spray pyrolysis (USP) to explore their potential as oxygen-evolving photoanodes. The target of these studies is to use translucent hematite films deposited on conducting fluorine doped tin oxide (FTO) glass as top electrodes in a tandem cell that accomplishes the cleavage of water into hydrogen and oxygen by sunlight. The properties of layers made by USP were compared to those deposited by conventional spray pyrolysis (SP). Although both types of films show similar XRD and UV-visible and Raman spectra, they differ greatly in their morphology. The mesoscopic alpha-Fe(2)O(3) layers produced by USP consist mainly of 100 nm-sized platelets with a thickness of 5-10 nm. These nanosheets are oriented mainly perpendicularly to the FTO support, their flat surface exposing (001) facets. The mesoscopic leaflet structure has the advantage that it allows for efficient harvesting of visible light, while offering at the same time the very short distance required for the photogenerated holes to reach the electrolyte interface before recombining with conduction band electrons. This allows for water oxidation by the valence band holes even though their diffusion length is only a few nanometers. Distances are longer in the particles produced by SP favoring recombination of photoinduced charge carriers. Open-circuit photovoltage measurements indicate a lower surface state density for the nanoplatelets as compared to the round particles. These factors explain the much higher photoactivity of the USP compared to the SP deposited alpha-Fe(2)O(3) layers. Addition of hydrogen peroxide to the alkaline electrolyte further improves the photocurrent-voltage characteristics of films generated by USP indicating the hole transfer from the valence band of the semiconductor oxide to the adsorbed water to be the rate-limiting kinetic step in the oxygen generation reaction.     

Understanding of the finite size effects on lattice vibrations and electronic transitions of nano alpha-Fe2O3

Alpha-Fe(2)O(3) nanocrystals with controlled diameters ranging from 10 to 63 nm were successfully prepared. The finite size effects in alpha-Fe(2)O(3) nanocrystals were probed by X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, UV-visible spectrum, and magnetization measurements. With a size reduction, alpha-Fe(2)O(3) nanocrystals showed a lattice expansion and an enlarged axial ratio of c/a that is in apparent contradiction to the previous conjecture of high lattice symmetry for alpha-Fe(2)O(3) nanocrystals at small sizes. The surface terminations of alpha-Fe(2)O(3) nanocrystals were found to be highly hydrated with a size dependence that surprisingly follows the surface hydration chemistry of anatase TiO2 nanocrystals reported recently by us. The lattice vibrations, electronic transitions, and magnetic properties of alpha-Fe(2)O(3) nanocrystals were significantly modified by surface hydration and lattice expansion. The finite size effects that occurred in alpha-Fe(2)O(3) nanocrystals at small sizes were first found to give a red shift in frequencies of perpendicular mode at 540 cm(-1), a blue shift in the electronic transition of double exciton process in visible region, and a significant decrease in the coercive force.