Cytochrome P450 119 Compounds I Formed by Chemical Oxidation and Photooxidation Are the Same Species

Compound I from cytochrome P450 119 prepared by the photooxidation method involving peroxynitrite oxidation of the resting enzyme to Compound II followed by photooxidation to Compound I was compared to Compound I generated by m-chloroperoxybenzoic acid (MCPBA) oxidation of the resting enzyme. The two methods gave the same UV/Visible spectra, the same products from oxidations of lauric acid and palmitic acid and their (ω-2,ω-2,ω-3,ω-3)-tetradeuterated analogues, and the same kinetics for oxidations of lauric acid and caprylic acid. The experimental identities between the transients produced by the two methods leave no doubt that the same Compound I species is formed by the two methods.     

Oxidation of 10-undecenoic acid by cytochrome P450(BM-3) and its Compound I transient

Oxidations of 10-undecenoic acid by cytochrome P450(BM-3) and its Compound I transient were studied. The only product formed in Compound I oxidations was 10,11-epoxyundecanoic acid, whereas the enzyme under turnover conditions gave the epoxide and 9-hydroxy-10-undecenoic acid in a 10 : 90 ratio. Kinetic studies at 0 °C of oxidations by Compounds I formed by MCPBA oxidation and by a photo-oxidation pathway gave the same results, displaying saturation kinetics that yielded equilibrium binding constants and first-order oxidation rate constants that were experimentally indistinguishable. Oxidation of 10-undecenoic acid by Compound I from CYP119 generated by MCBPA oxidation also gave 10,11-epoxyundecanoic acid as the only product. CYP119 Compound I bound the substrate less strongly but reacted with a faster oxidation rate constant than P450(BM-3) Compound I. The kinetic parameters for oxidation of the substrate by P450(BM-3) under turnover conditions were similar to those of the Compound I transient even though the products differed.     

Cytochrome p450 compound I

Cytochrome P450 enzymes (P450s) comprise a large class of enzymes that effect numerous oxidations in nature. The active oxidants in P450s are thought to be iron(IV)-oxo porphyrin radical cations termed Compounds I, and these intermediates have been sought since the discovery of P450s 40 years ago. We report formation of the Compound I derivative of a P450 enzyme by laser flash photolysis oxidation of the corresponding Compound II species, an iron(IV)-oxo neutral porphyrin intermediate. The Compound II derivative in turn was produced by oxidation of the P450 with peroxynitrite, which effected a net one-electron, oxo-transfer reaction to the iron(III) atom of the resting enzyme. For the P450 studied in this work, CYP119 from the thermophile Sulfolobus solfactaricus, the P450 Compound II derivative was stable for seconds at ambient temperature, and the Compound I transient decayed with a lifetime of ca. 200 ms.     

Kinetics of two-electron oxidations by the compound I derivative of chloroperoxidase, a model for cytochrome P450 oxidants

[structure: see text] Rate constants for two-electron oxidation reactions of Compound I from chloroperoxidase (CPO) with a variety of substrates were measured by stopped-flow kinetic techniques. The thiolate ligand of CPO Compound I activates the iron-oxo species with the result that oxidation reactions are 2 to 3 orders of magnitude faster than oxidations by model iron(IV)-oxo porphyrin radical cations containing weaker binding counterions.     

A Mechanistic Switch in C-H Bond Activation by Elusive Fe\begin{document}$^\text{V}$\end{document}(O)(TAML) Reaction Intermediate: A Theoretical Study

The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta's experiment was mechanistically studied herein by means of density functional theory calculations. Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates (the aliphatic cyclohexane, 2, 3-dimethylbutane and the aromatic toluene, ethylbenzene and cumene). For the aliphatic substrates, C-H oxidation by the oxidant Fe\begin{document}$^{\rm{V}}$\end{document}(O)(TAML) is a hydrogen atom transfer process; whereas for the aromatic substrates, C-H oxidation is a proton-coupled electron transfer (PCET) process with a proton transfer character on the transition state, that is, a proton-coupled electron transfer process holding a proton transfer-like transition state (PCET(PT)). This difference is caused by the strong \begin{document}$\pi$\end{document}-\begin{document}$\pi$\end{document} interactions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates, which has a "pull" effect to make the electron transfer from substrates to the Fe=O moiety inefficient.     

Oxidation of C-H bonds by [(bpy)2(py)RuIVO]2+ occurs by hydrogen atom abstraction

Anaerobic oxidations of 9,10-dihydroanthracene (DHA), xanthene, and fluorene by [(bpy)(2)(py)Ru(IV)O](2+) in acetonitrile solution give mixtures of products including oxygenated and non-oxygenated compounds. The products include those formed by organic radical dimerization, such as 9,9'-bixanthene, as well as by oxygen-atom transfer (e.g., xanthone). The kinetics of these reactions have been measured. The kinetic isotope effect for oxidation of DHA vs DHA-d(4) gives k(H)/k(D) > or = 35 +/- 1. The data indicate a mechanism of initial hydrogen-atom abstraction forming radicals that dimerize, disproportionate and are trapped by the oxidant. This mechanism also appears to apply to the oxidations of toluene, ethylbenzene, cumene, indene, and cyclohexene. The rate constants for H-atom abstraction from these substrates correlate well with the strength of the C-H bond that is cleaved. Rate constants for abstraction from DHA and toluene also correlate with those for oxygen radicals and other oxidants. The rate constant for H-atom transfer from toluene to [(bpy)(2)(py)Ru(IV)O](2+) appears to be close to that predicted by the Marcus cross relation, using a tentative rate constant for hydrogen atom self-exchange between [(bpy)(2)(py)Ru(III)OH](2+) and [(bpy)(2)(py)Ru(IV)O](2+).     

Kinetics of oxidation of organic compounds by silver(II) in aqueous perchloric acid solution. Part 5

Summary The kinetics and mechanism of oxidation of a series of alcohols, namely cyclohexanol, cyclopentanol, pentan-2-ol and benzyl alcohol, by silver(II) perchlorate in perchloric acid solution. have been investigated by the stopped-flow technique. These oxidations proceed through two parallel pathways involving Ag²⁺ and AgOH⁺ species. In the case of benzyl alcohol, the hydroxo species, which has been found to be almost universally reactive toward different organic substrates, is inactive; this behaviour has been interpreted in terms of interaction of the oxidant with the aromatic moiety in the alcohol. The reactivities are discussed in terms of substrate reaction sites with reference to electronic availability and reaction products.     

Copper-catalyzed aerobic oxidative C-H functionalizations: trends and mechanistic insights

The selective oxidation of C-H bonds and the use of O(2) as a stoichiometric oxidant represent two prominent challenges in organic chemistry. Copper(II) is a versatile oxidant, capable of promoting a wide range of oxidative coupling reactions initiated by single-electron transfer (SET) from electron-rich organic molecules. Many of these reactions can be rendered catalytic in Cu by employing molecular oxygen as a stoichiometric oxidant to regenerate the active copper(II) catalyst. Meanwhile, numerous other recently reported Cu-catalyzed C-H oxidation reactions feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II). In some of these cases, evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism. Organometallic C-H oxidation reactions of this type represent important new opportunities for the field of Cu-catalyzed aerobic oxidations.     

Laser flash photolysis generation and kinetic studies of porphyrin-manganese-oxo intermediates. Rate constants for oxidations effected by porphyrin-Mn(V)-oxo species and apparent disproportionation equilibrium constants for porphyrin-Mn(IV)-oxo species

Porphyrin-manganese(V)-oxo and porphyrin-manganese(IV)-oxo species were produced in organic solvents by laser flash photolysis (LFP) of the corresponding porphyrin-manganese(III) perchlorate and chlorate complexes, respectively, permitting direct kinetic studies. The porphyrin systems studied were 5,10,15,20-tetraphenylporphyrin (TPP), 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPFPP), and 5,10,15,20-tetrakis(4-methylpyridinium)porphyrin (TMPyP). The order of reactivity for (porphyrin)Mn(V)(O) derivatives in self-decay reactions in acetonitrile and in oxidations of substrates was (TPFPP) > (TMPyP) > (TPP). Representative rate constants for reaction of (TPFPP)Mn(V)(O) in acetonitrile are k = 6.1 x 10(5) M(-1) s(-1) for cis-stilbene and k = 1.4 x 10(5) M(-1) s(-1) for diphenylmethane, and the kinetic isotope effect in oxidation of ethylbenzene and ethylbenzene-d(10) is k(H)/k(D) = 2.3. Competitive oxidation reactions conducted under catalytic conditions display approximately the same relative rate constants as were found in the LFP studies of (porphyrin)Mn(V)(O) derivatives. The apparent rate constants for reactions of (porphyrin)Mn(IV)(O) species show inverted reactivity order with (TPFPP) < (TMPyP) < (TPP) in reactions with cis-stilbene, triphenylamine, and triphenylphosphine. The inverted reactivity results because (porphyrin)Mn(IV)(O) disproportionates to (porphyrin)Mn(III)X and (porphyrin)Mn(V)(O), which is the primary oxidant, and the equilibrium constants for disproportionation of (porphyrin)Mn(IV)(O) are in the order (TPFPP) < (TMPyP) < (TPP). The fast comproportionation reaction of (TPFPP)Mn(V)(O) with (TPFPP)Mn(III)Cl to give (TPFPP)Mn(IV)(O) (k = 5 x 10(8) M(-1) s(-1)) and disproportionation reaction of (TPP)Mn(IV)(O) to give (TPP)Mn(V)(O) and (TPP)Mn(III)X (k approximately 2.5 x 10(9) M(-1) s(-1)) were observed. The relative populations of (porphyrin)Mn(V)(O) and (porphyrin)Mn(IV)(O) were determined from the ratios of observed rate constants for self-decay reactions in acetonitrile and oxidation reactions of cis-stilbene by the two oxo derivatives, and apparent disproportionation equilibrium constants for the three systems in acetonitrile were estimated. A model for oxidations under catalytic conditions is presented.     

Substitution of hydrogen by deuterium changes the regioselectivity of ethylbenzene hydroxylation by an oxo-iron-porphyrin catalyst

Heme oxo-iron complexes are powerful oxygenation catalysts of environmentally benign hydroxylation processes. We have performed density functional theoretic calculations on a model system, that is, an oxo-iron-porphyrin (Por) complex [(Fe=O)Cl(Por)], and studied its reactivity toward a realistic substrate, namely, ethylbenzene. The calculations showed that the dominant reaction process in the gas phase is benzyl hydroxylation leading to 1-phenylethanol, with an energetic barrier of 9.1 kcal mol(-1), while the competing para-phenyl hydroxylation has a barrier 3.0 kcal mol(-1) higher in energy. This benzyl hydroxylation barrier is the lowest C-H hydroxylation barrier we have obtained so far for oxo-iron-porphyrin complexes. Due to electronic differences between the intermediates in the phenyl and benzyl hydroxylation processes, the phenyl hydroxylation process is considerably stabilised over the benzyl hydroxylation mechanism in environments with a large dielectric constant. In addition, we calculated kinetic isotope effects of the substitution of one or more hydrogen atoms of ethylbenzene by deuterium atoms and studied its effect on the reaction barriers. Thus, in a medium with a large dielectric constant, a regioselectivity change occurs between [H(10)]ethylbenzene and [D(10)]ethylbenzene whereby the deuterated species gives phenol products whereas the hydrogenated species gives mainly 1-phenylethanol products. This remarkable metabolic switching was analysed and found to occur due to 1) differences in strength between a C-H versus a C-D bond and 2) stabilisation of cationic intermediates in a medium with a large dielectric constant. We have compared our calculations with experimental work on synthetic oxo-iron-porphyrin catalysts as well as with enzyme-reactivity studies.     

Selective Oxygen Transfers with Iron(III) Porphyrin Nitrite

The reaction of octaethylporphyrin iron(III) chloride with potassium crown ether (18-crown-6) nitrite in N-methylpyrrolidone-1% acetic acid under argon generates the iron(III) nitrite salt (PFeNO(2)). The latter is a unique and selective oxygen atom transfer reagent. The reaction of a broad range of substrates (S) proceeds quantitatively to yield the oxidized substrate and the iron(II) porphyrin-nitrosyl adduct: PFeNO(2) + S --> PFeNO + SO. Diatomic molecules to which oxygen is directly transferred from PFeNO(2) are NO, CO, and O(2). The conversion NO to NO(2) is shown via (15)NO(2)(-) labeling experiments to proceed exclusively by the O atom transfer process. The ozone, generated from dioxygen, was trapped with nitrite ion and the two olefins 2-methyl-2 butene and 2,3-dimethyl-2 butene. These substances are inert to PFeNO(2) under argon. However, in an oxygen-saturated reaction mixture, nitrite produced nitrate. The olefins, following reduction of the reaction mixture with Zn/HOAc, yielded 1 mol of acetone and acetaldehyde and 2 mol of acetone, respectively. Other simple O atom transfers under argon were observed with dimethyl sulfide and triphenylphosphine. The PFeNO(2) reagent shows a preference for O insertion into allylic, benzylic, and aldehydic C-H bonds. Thus, no olefin containing these moieties is epoxidized. However, styrene and cis-stilbene are converted to styrene oxide and cis-stilbene oxide, respectively. The double oxidation of allylbenzene to trans-cinnamaldehyde entails an allylic rearrangement that suggests radical character to the O insertion process. However, no kinetic evidence for this was obtained. The reaction is an overall third-order process, rate = k(PFe(III))(NO(2)(-))(S). There was no correlation of observed rates with relevant C-H bond dissociation energies of substrates. The fastest reacting substrate was nitric oxide (k(22) degrees = 52 M(-)(2) s(-)(1)) and the slowest was toluene (k(50) degrees = 6.3 x 10(-)(4) M(-)(2) s(-)(1)). The range and selectivity of these O atom transfers sets them apart from the catalytic oxidations brought about by reactions of iron(III) porphyrins with peroxides, iodosoaryls, hypochlorite, and other oxidants. The driving force for the relatively mild oxidations with PFeNO(2) resides in the thermodynamic stability of the heme-NO adduct. Given the broad presence of nitrite in the environment and the ubiquity of porphyrins in the biosphere, the activation of nitrite by iron porphyrins has both an environmental and biochemical significance.     

Theoretical study of the oxidation reactions of methylacrylic acid and methyl methacrylate by triplet O2

The oxidations of organic compounds and polymers by triplet O2 were called "dark oxidation" or "auto-oxidation", in contrast to their "photo-oxidation" by singlet O2. To study the relevant dark oxidation mechanism we take methylacrylic acid (MAA) and methyl methacrylate (MMA) as prototypes to study their reactions with triplet O2 by performing density functional theory calculations. Two reaction channels, the C-H bond oxidation and C=C bond oxidation, have been characterized in detail. The structures of the initial contact charge-transfer complexes, intermediates, transition states, and final oxides involved in the reactions have been localized at the UB3LYP/6-311+G(d,p) level. It is found that the C-H bond in the methyl group connected to the C=C bond presents relatively higher reactivity toward triplet O2 than the C=C bond itself. Thus, the reactions are expected to proceed via the C-H bond oxidation branch at room temperature and also via C=C bond oxidation at elevated temperature. In this sense, an effective method for preventing or retarding the dark oxidations of MAA and MMA in a natural environment is to chemically decorate or protect the C-H bond in the methyl connected to the C=C bond. The present results are expected to provide a general guide for understanding the dark oxidation mechanism of organic compounds and polymers.     

氟烷磺酰氟/双氧水/碱/丙酮体系与苄醇衍生物的氧化反应

研究了氟烷磺酰氟/双氧水/氢氧化钠/丙酮体系与6个苄醇衍生物的氧化反应, 其中氟烷磺酰氟包括HCF₂CF₂OCF₂CF₂SO₂F, n-C₄F₉SO₂F和n-C₈F₁₇SO₂F. 最优反应条件为n(苄醇衍生物): n(氟烷磺酰氟): n(双氧水): n(氢氧化钠)=1: 4: 8: 8, 溶剂为丙酮, 反应温度为20℃, 反应时间为24 h. 产物酮的收率为23% ~92%. 探讨了该氧化反应的机理, 原位生成的氟烷基过氧磺酸中间体可将丙酮氧化为二甲基二氧杂环丙烷, 进而将反应体系中共存的苄醇衍生物氧化成相应的产物酮. 氟烷磺酰氟/双氧水/氢氧化钠/丙酮体系原位生成的二甲基二氧杂环丙烷氧化苄位羟基的能力和传统的Oxone/CH₃COCH₃体系相当. 本研究提供了一种新颖的原位制备二甲基二氧杂环丙烷的方法.     

BF3-activated oxidation of alkanes by MnO4 -

The oxidation of alkanes and arylalkanes by KMnO(4) in CH(3)CN is greatly accelerated by the presence of just a few equivalents of BF(3), the reaction occurring readily at room temperature. Carbonyl compounds are the predominant products in the oxidation of secondary C-H bonds. Spectrophotometric and kinetics studies show that BF(3) forms an adduct with KMnO(4) in CH(3)CN, [BF(3).MnO(4)](-), which is the active species responsible for the oxidation of C-H bonds. The rate constant for the oxidation of toluene by [BF(3).MnO(4)](-) is over 7 orders of magnitude faster than by MnO(4)(-) alone. The kinetic isotope effects for the oxidation of cyclohexane, toluene, and ethylbenzene at 25.0 degrees C are as follows: k(C6H12)/k(C6D12) = 5.3 +/- 0.6, k(C7H8)/k(C7D8) = 6.8 +/- 0.5, k(C8H10)/k(C8D10) = 7.1 +/- 0.5. The rate-limiting step for all of these reactions is most likely hydrogen-atom transfer from the substrate to an oxo group of the adduct. A good linear correlation between log(rate constant) and C-H bond energies of the hydrocarbons is found. The accelerating effect of BF(3) on the oxidation of methane by MnO(4)(-) has been studied computationally by the Density Functional Theory (DFT) method. A significant decrease in the reaction barrier results from BF(3) coordination to MnO(4)(-). The BF(3) coordination increases the ability of the Mn metal center to achieve a d(1) Mn(VI) electron configuration in the transition state. Calculations also indicate that the species [2BF(3).MnO(4)](-) is more reactive than [BF(3).MnO(4)](-).     

Kinetics and mechanism of the oxidation of alkylaromatic compounds by a trans-dioxoruthenium(VI) complex

The oxidations of a series of 21 alkylaromatic compounds by trans-[Ru(VI)(L)(O)(2)](2+) (L = 1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane) have been studied in CH(3)CN. Toluene is oxidized to benzaldehyde and a small amount of benzyl alcohol. 9,10-Dihydroanthracene is oxidized to anthracene and anthraquinone. Other substrates give oxygenated products. The kinetics of the reactions were monitored by UV-vis spectrophotometry, and the rate law is: -d[Ru(VI)]/dt = k(2)[Ru(VI)][ArCH(3)]. The kinetic isotope effects for the oxidation of toluene/d(8)-toluene and fluorene/d(10)-fluorene are 15 and 10.5, respectively. A plot of Delta H(++) versus Delta S(++) is linear, suggesting a common mechanism for all the substrates. In the oxidation of para-substituted toluenes, a linear correlation between log k(2) and sigma(0) values is observed, consistent with a benzyl radical intermediate. A linear correlation between Delta G(++) and Delta H(0) (the difference between the strength of the bond being broken and that being formed in a H-atom transfer step) is also found, which strongly supports a hydrogen atom transfer mechanism for the oxidation of these substrates by trans-[Ru(VI)(L)(O)(2)](2+). The slope of (0.61 +/- 0.06) is in reasonable agreement with the theoretical slope of 0.5 predicted by Marcus theory.     

Promoting laccase activity towards non-phenolic substrates: a mechanistic investigation with some laccase-mediator systems

The oxidation of benzyl alcohols with the enzyme laccase, under mediation by appropriate mediator compounds, yields carbonylic products, whereas laccase can not oxidise these non-phenolic substrates directly. The oxidation step is performed by the oxidised form of the mediator (Med(ox)), generated on its interaction with laccase. The Med(ox) can follow either an electron transfer (ET) or a radical hydrogen atom transfer (HAT) route of oxidation of the substrates. Experimental evidence is reported that enables unambiguous assessment of the occurrence of either one the oxidation routes with each of the investigated mediators, namely, ABTS, HBT, HPI and VLA. Support to the conclusions is provided by (i) investigating the intermolecular selectivity of oxidation with appropriate substrates, (ii) attempting Hammett correlations for the oxidation of a series of 4-X-substituted benzyl alcohols, (iii) measuring the kinetic isotope effect, (iv) investigating the product pattern with suitable probe precursors. Based on these points, a HAT mechanism results to be followed by the laccase-HBT, laccase-HPI and laccase-VLA systems, whereas an ET route appears feasible in the case of the laccase-ABTS system.     

Enhanced electron transfer and lauric acid hydroxylation by site-directed mutagenesis of CYP119

CYP119, a cytochrome P450 from a thermophilic organism for which a crystal structure is available, is shown here to hydroxylate lauric acid in a reaction supported by putidaredoxin and putidaredoxin reductase. This fatty acid hydroxylation activity is increased 15-fold by T214V and D77R mutations. The T214V mutation increases the rate by facilitating substrate binding and enhancing the associated spin state change, whereas the D77R mutation improves binding of the heterologous redox partner putidaredoxin to CYP119 and the rate of electron transfer from it to the heme group. A sequence alignment with P450(cam) can, therefore, be used to identify a part of the binding site for putidaredoxin on an unrelated P450 enzyme. This information can be used to engineer by mutagenesis an improved complementarity of the protein-protein interface that results in improved electron transfer from putidaredoxin to the P450 enzyme. As a result, the catalytic activity of the thermo- and barostable CYP119 has been incorporated into a catalytic system that hydroxylates fatty acids.     

Predictable stereoselective and chemoselective hydroxylations and epoxidations with P450 3A4

Enantioselective hydroxylation of one specific methylene in the presence of many similar groups is debatably the most challenging chemical transformation. Although chemists have recently made progress toward the hydroxylation of inactivated C-H bonds, enzymes such as P450s (CYPs) remain unsurpassed in specificity and scope. The substrate promiscuity of many P450s is desirable for synthetic applications; however, the inability to predict the products of these enzymatic reactions is impeding advancement. We demonstrate here the utility of a chemical auxiliary to control the selectivity of CYP3A4 reactions. When linked to substrates, inexpensive, achiral theobromine directs the reaction to produce hydroxylation or epoxidation at the fourth carbon from the auxiliary with pro-R facial selectivity. This strategy provides a versatile yet controllable system for regio-, chemo-, and stereoselective oxidations at inactivated C-H bonds and demonstrates the utility of chemical auxiliaries to mediate the activity of highly promiscuous enzymes.     

New protocol for oxidation in water: micellar oxidation systems composed of novel amphiphilic hydroperoxides

A series of novel amphiphilic hydroperoxides, alpha-alkoxyalkyl hydroperoxides (alpha-AHPs) and their related hydroperoxides, were designed and prepared with the intention of developing new oxidizing agents bearing a micelle-forming character in water. After their fundamental physical and interfacial properties were elucidated, both oxidation of benzyl sulfide and epoxidation of geraniol promoted by these hydroperoxides were investigated in detail under various conditions. Effective oxidation ofbenzyl sulfide to the corresponding sulfoxide was achieved in aqueous micellar systems composed of alpha-AHPs la-d and a catalytic amount of MoO2(acac)2 at 30 degrees C. Up to 100% conversion was observed under the optimum conditions. In the case of epoxidation of geraniol in water, the corresponding 2,3-epoxide was selectively formed in good yields. Because the conversion of each substrate in the micellar systems was higher than that in nonmicellar media, the solubilization of substrates into micelles was certainly effective in promoting oxidations of insoluble substrates in aqueous media. Micellar oxidation systems composed of novel amphiphilic hydroperoxides afford a new protocol in order to derive safer conditions under which these reactions may be carried out.     

Imidazolium ionic liquids as solvents for cerium(IV)-mediated oxidation reactions

Use of imidazolium ionic liquids as solvents for organic transformations with tetravalent cerium salts as oxidizing agents was evaluated. Good solubility was found for ammonium hexanitratocerate(IV) (ceric ammonium nitrate, CAN) and cerium(IV) triflate in 1-alkyl-3-methylimidazolium triflate ionic liquids. Oxidation of benzyl alcohol to benzaldehyde in 1-ethyl-3-methylimidazolium triflate was studied by in-situ FTIR spectroscopy and 13C NMR spectroscopy on carbon-13-labeled benzyl alcohol. Careful control of the reaction conditions is necessary because ammonium hexanitratocerate(IV) dissolved in an ionic liquid can transform benzyl alcohol not only into benzaldehyde but also into benzyl nitrate or benzoic acid. The selectivity of the reaction of cerium(IV) triflate with benzyl alcohol in dry ionic liquids depends on the degree of hydration of cerium(IV) triflate: anhydrous cerium(IV) triflate transforms benzyl alcohol into dibenzyl ether, whereas hydrated cerium(IV) triflate affords benzaldehyde as the main reaction product. Reactions of ammonium hexanitratocerate(IV) with organic substrates other than benzyl alcohol have been explored. 1,4-Hydroquinone is quantitatively transformed into 1,4-quinone. Anisole and naphthalene are nitrated. For the cerium-mediated oxidation reactions in ionic liquids, high reaction temperatures are an advantage because under these conditions smaller amounts of byproducts are formed.