Microstructure and Ion Exchange in Stearic Acid Langmuir-Blodgett Films Studied by Fourier Transform Infrared-Attenuated Total Reflection Spectroscopy

Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectra have been recorded of 11-layer Langmuir-Blodgett (LB) films of stearic acid deposited at various surface pressures (0.1, 15, and 35 mN/m), and the molecular orientation angles were evaluated quantitatively, which supplied insight into the molecular order with the alkyl chains tightly packed like crystal in the LB films deposited at the zero and higher surface pressures. These experimental results indicate that, in the Langmuir film as the precursor of LB films, stearic acid molecules self-aggregate to form two-dimensional crystalline domains already even at the zero surface pressure, which results in the inhomogeneity of monolayer. The analysis of dependence of nu(C=O) intensity on the surface pressure, surface density, and subphase temperature leads to the conclusion that the defects in LB films originate from the Langmuir film and be conserved upon deposition. Annealing below 50 degrees C and cooling could improve the monolayer homogeneity, and thus a defect-free or low-defect LB films can be deposited. Furthermore, ion exchange conducted in the LB films, on the other hand, confirms the existence of structure defects in LB films of stearic acid. The polar plane microstructure, lateral transport along the polar planes and the coordination types of stearic acid/cation system may be the rate-limiting process. The results have implication on the possible uses of stearic acid LB films as ion-exchange materials or sensors. Copyright 2001 Academic Press.     

花生酸-钌有机螯合物Ru(phen)_3~(2+)的单分子膜和LB膜中分子聚集行为的研究

以功能性的钌有机螯合物Ru(phen)_3~(2+)作为亚相离子,花生酸在亚相表面 上形成稳定的单分子膜。π-A等温线和动态弹性测量表明,此膜因花生酸与钌螯离 子发生了静电相互作用而有更大的可压缩性,并在固态区发生了分子聚集。用垂直 法成功地制备了嵌有Ru(phen)_3~(2+)离子的超薄有序Y-型LB膜。光谱实验表明, 所得LB膜是稳定、均匀的层状三明治结构,在层面内Ru(phen)_3~(2+)与花生酸结 合成相对稳定的分子基团形成了J-聚体。     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

LB Film Structure of Nanometer‐Scale PEEKK Macrocyclic Oligomers

A rigid macrocyclic oligomer (RCO), cyclic poly(aryl ether ketone), was synthesized and used to produce Langmuir‐Blodgett (LB) films. The isotherm of surface pressure versus surface area showed that the RCO molecules form a stable monolayer on the water subphase with an area per molecule of about 1.7 nm². The structure of the LB film was confirmed by means of atomic force microscope, and two‐dimensionally ordered cavities of nanometer scale were observed in the LB film.     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

血红素在有序分子膜中的行为研究

本文研究了血红素(Heme)在硬脂酸(SA)单分子膜和Langmuir-B1odgett(LB)膜中的行为。Heme及其与SA的混合物均能在纯水亚相形成稳定的单分子膜。当摩尔分数x     

Metal ion-induced H-aggregation of a water-soluble anionic dye Congo red (CR) in Langmuir–Blodgett (LB) film

Present communication reports the preparation of Langmuir monolayer of water-soluble anionic dye Congo red (CR) by allowing it to adsorb from the aqueous subphase onto the preformed Langmuir monolayer of anionic stearic acid using divalent metal cations Mg²⁺ as mediator. Isotherm and compressibility studies of SA-Mg-CR hybrid monolayer gave valuable information about the molecular organisation in the Langmuir monolayer. Absorption spectroscopic studies revealed the formation of H-aggregates in the hybrid Langmuir–Blodgett (LB) films fabricated at lower salt concentration in the subphase. Atomic Force Microscopic image gave visual evidence of distinct nanocrystalline domains in the LB monolayer film.     

Formation, structure, and morphology of triazole-based Langmuir-Blodgett films

The formation, morphology, and structure of two-dimensional Langmuir-Blodgett (LB) assemblies of octadecyltriazole (ODT)-based metal-containing oligomers presenting, in the case of iron, the spin-crossover phenomenon is studied with Brewster angle microscopy, IR dichroism, X-ray diffraction, and atomic force microscopy. Two processes occurring at the air-water interface are confirmed to dominate the mechanism of formation of these LB films, the instability of the coordination polymers at the air-water interface and recoordination of metal ions in the subphase at the interface during the LB deposition process. The Langmuir film allowing the LB film formation is mostly made of ODT. The films do present a lamellar structure in which the ODT molecules are tilted and incorporate coordinated isolated metal ions and oligomers of metal ions. The morphology of the LB films is globally flat but with a rather high roughness resulting from inhomogeneities related to phenomena occurring during the LB film formation. These observations are in agreement with the relative affinity of the metal ions with ODT and the relative stability of the coordination polymers at the air-water interface, which have been determined for the group Cu-Fe-Co-Ni.     

Langmuir-Blodgett films of a Mo-blue nanoring [Mo(142)O(429)H(10)(H(2)O)(49)(CH(3)CO(2))(5)(CH(3)CH(2)CO(2))](30)(-) (Mo(142)) by the semiamphiphilic method

Langmuir monolayers and LB films of the ring-shaped mixed-valence polyoxomolybdate [Mo142O429H10(H2O)49(CH3CO2)5(CH3CH2CO2)](30-) (Mo142) dissolved in the aqueous subphase have been successfully fabricated by using the adsorption properties of a DODA monolayer. Infrared and ultraviolet-visible spectroscopy of the LB films indicates that Mo142 and DODA molecules are incorporated within these LB films. X-ray reflectivity experiments indicate that the LB films exhibit a well-defined lamellar structure formed by bilayers of DODA molecules alternating with monolayers of Mo142. Using behenic acid-modified hydrophobic quartz substrate is critical for the formation of the well-defined lamellar structure. From the values of the periodicity obtained by these experiments it is clear that the Mo142 clusters lie flat along the charged organic layers. AFM images also showed the flat and homogeneous films on the quartz substrates treated with behenic acid. Cyclic voltammograms of Mo142-LB films deposited on ITO substrates showed quasi-reversible oxidation/reduction waves with positive shift of the potential compared to the case of solution.     

Effect of water and air-water interface on the structural modification of Ni-arachidate Langmuir-Blodgett films

Nickel arachidate (NiA) Langmuir-Blodgett (LB) films have been deposited on hydrophilic Si(0 0 1) substrates by three (up-down-up) and five (up-down-up-down-up) strokes. During deposition, substrates were kept inside the water subphase for different times after each down stroke. Structural information of all the LB films have been obtained from X-ray reflectivity (XRR) studies. One and two symmetric monolayer (SML) was deposited on top of the asymmetric monolayer (AML) in three and five stokes respectively. All the preformed LB films were then used to go through the air-water interface with the same speed that was used at the time of film deposition. Structural information obtained from the XRR studies show that mainly the top layer density decreases after passing through the air-water interface but the layered structure remains the same. Information obtained from both the XRR and atomic force microscopy (AFM) studies suggest that molecules peeled from the top SML layer do not reincorporate with the LB film through tail-tail hydrophobic interaction. Our study shows that NiA LB film has better stability compared with cadmium arachidate LB film inside the water subphase without forming any out-of-plane molecular reorganization.     

Tuning the arrangement of mono-crown ether-substituted phthalocyanines in Langmuir-Blodgett films by the length of alkyl chains and the cation in subphase

Amphiphilic phthalocyanines with one crown ether and three alkyl chain substitutions can form stable monolayers on a water surface. This monolayer can be transferred to a substrate by a vertical dipping method. The arrangement of phthalocyanine molecules in LB films was affected by the length of alkyl chains and the coordination of alkali ions in crown ether. Davydov splitting was observed in the absorption spectra of the LB films of phthalocyanine with the shortest alkyl chain substitutions, and this splitting was affected by the alkali ions in the subphase.     

Spectroscopic studies on molecular recognition capabilities of a nucleolipid bearing thymine headgroup to adenosine

The Langmuir-Blodgett (LB) films of octadecanoyl ester of 1-(2-carboxyethyl) thymine deposited from pure water and aqueous adenosine subphases were investigated by ultraviolet-visible (UV-vis), Fourier transform infrared-attenuated total reflection (FTIR-ATR), and Fourier transform surface-enhanced Raman scattering (FT-SERS) spectroscopy. The obtained spectral results indicate that the adenosine molecules in the subphase can be transferred onto solid substrates by LB techniques as a result of the formation of base pairs at the air/water interface. UV-vis spectra alternations indicated that, with increasing adenosine concentration in subphase, more adenosine molecules were recognized by nucleolipid monolayer and were transferred onto the quartz substrates. The closed-packing of the constituent molecules facilitates the photodimerization of the thymine moieties in the headgroup under ultraviolet irradiation. FTIR-ATR results suggest that the hydrocarbon chains of nucleolipid in the LB films deposited from pure water and aqueous adenosine take on a close-packed all trans conformation. By analyzing the FT-SERS spectra results, it can be deduced that the orientation of nucleobase in the headgroup is different before and after the recognition effect occurred. For LB film deposited from pure water, the nucleobases are lying flat on the silver substrates; whereas for LB film deposited from aqueous adenosine, the base pairs take an end-on adsorption on silver substrate.     

Effect of pH on the control of molecular orientation in monolayer of bent-core liquid crystal materials by Langmuir–Blodgett method

Control of molecular orientation at the substrate surface is significant to understand the surface science. Langmuir films of bent-core liquid crystals having alkyl chains at both ends were deposited on silicon substrate. Studies were carried out on air–water interface by changing pH of the subphase. On compression, molecules were arranged in stacks at high pH where as uniform monolayer was formed at lower pH. Limiting area increased at low pH, which resulted in the formation of monolayer after attaining a sustainable surface pressure. Langmuir films were transferred to silicon substrate, and atomic force microscopy images showed appropriate height profiles.     

Controlling the Structural and Electrical Properties of Diacid Oligo(Phenylene Ethynylene) Langmuir–Blodgett Films

The preparation, characterization and electrical properties of Langmuir–Blodgett (LB) films composed of a symmetrically substituted oligomeric phenylene ethynylene derivative, namely, 4,4′‐[1,4‐phenylenebis(ethyne‐2,1‐diyl)]dibenzoic acid (OPE2A), are described. Analysis of the surface pressure versus area per molecule isotherms and Brewster angle microscopy reveal that good‐quality Langmuir (L) films can be formed both on pure water and a basic subphase. Monolayer L films were transferred onto solid substrates with a transfer ratio of unity to obtain LB films. Both L and LB films prepared on or from a pure water subphase show a red shift in the UV/Vis spectrum of about 14 nm, in contrast to L and LB films prepared from a basic subphase, which show a hypsochromic shift of 15 nm. This result, together with X‐ray photoelectron spectroscopic and quartz crystal microbalance experiments, conclusively demonstrate formation of one‐layer LB films in which OPE2A molecules are chemisorbed onto gold substrates and consequently ? COO? Au junctions are formed. In LB films prepared on a basic subphase the other terminal acid group is also deprotonated and associates with an Na⁺ counterion. In contrast, LB films prepared from a pure water subphase preserve the protonated acid group, and lateral H‐bonds with neighbouring molecules give rise to a supramolecular structure. STM‐based conductance studies revealed that films prepared from a basic subphase are more conductive than the analogous films prepared from pure water, and the electrical conductance of the deprotonated films also coincides more closely with single‐molecule conductance measurements. This result was interpreted not only in terms of better electron transmission in ? COO? Au molecular junctions, but also in terms of the presence of lateral H‐bonds in the films formed from pure water, which lead to reduced conductance of the molecular junctions.     

Effect of compression of a stearic acid monolayer on interfacial binding of copper ions and cluster formation

The effect of compression of a stearic acid Langmuir monolayer on the interaction of copper ions with the monolayer and on the formation of interface clusters has been studied as functions of pH and ionic content of the water subphase. Copper binding was estimated by direct electron paramagnetic resonance measurements of ion concentrations in the water subphase. A scanning tunnelling microscopy study of monolayer Langmuir-Blodgett films, deposited on graphite substrates, gave evidence for the formation of nanosized clusters on the monolayer surface. The data obtained showed that the interaction of the monolayer with copper ions and the accompaning cluster formation processes were determined by the arrangement, order and mobility of the stearic acid molecules in the monolayer and the electrostatics at the interface.     

Highly Ordered LB Films of Amphiphilic Complexes With 8-Hydroxyquinoline

Organicelectrolndnescent(EL)deviceshaverecentlyreceivedmuchattentionbecausetheycanpotentiallyproduceemissionsofallcolorsandbecauseoftheirpossibleapplicationaslarge-arealight-easttingdisplays'-'.Variousorganicmaterialswereusedastheemittinglayers.The8-hydroxyquinolinecomplexes,suchasAlq,'-',Znq2,Beq2,andMgq,'(qis8-hydroxyquinoline)wereespeciallyusedaseasttingelementsowingtotheirhighexternalquantumefficiency,luminousefficiency,brightnessandlowerdrivingvoltage.SincetheLangmuir-Blodgett(LB)film…     

Thin films of discotic liquid crystals and their applications

ABSTRACT

Discotic liquid crystals (DLCs) are considered as fascinating systems due to their unique property of self-assembly to yield different columnar structures. DLCs are organic semiconductors and create pathways for the development of numerous optical and electrical devices. The thin films of DLCs can be considered as low dimensional system which can exhibit remarkable optical and physical properties. In this article, we present a review on ultrathin films of some interesting DLC molecules at air–water and air–solid interfaces. The Langmuir monolayer and Langmuir–Blodgett films of DLC molecules are extensively studied. The ultrathin films of DLC molecules can yield highly anisotropic layer wherein the molecular orientation and aggregation can have large impact on the physicochemical properties of the film. Different surface phases with different molecular orientations as function of surface density and temperature can be obtained by forming the Langmuir monolayer of the DLC molecules at the air–water interface. The Langmuir monolayer in a particular phase can be deposited onto the active area of a device layer-by-layer by employing a highly controlled Langmuir–Blodgett technique. Here, we report some interesting results related on molecular orientation of the DLC molecules at different interfaces. Such aggregation of DLC molecules in ultrathin films may find applications in thin film-based electro-optical devices.     

Formation of langmuir-blodgett films containing two-dimensional monoatomic arrays of rare-earth cations

The work is focused on the preparation and characterisation of rare-earth containing stearic acid Langmuir-Blodgett (LB) films. Stearic acid monolayer behavior on the rare-earth containing aqueous subphase have been analyzed by thermodynamic measurements. The compression isotherm shape changed substantially under varying the anion type at the constant rare-earth cation content in aqueous subphase. The structure of formed multilayer rare-earth containing LB films was studied using small angle X-rays diffraction. The considerable structural defects in multilayer films were found when rare-earth chloride solution was exploited as aqueous subphase, caused presumably by electrostatic interactions at the monolayer surface under high binding of rare-earth cations. The use of monodentate complexones like acetic acid was proposed to form bulk phase quasi-neutral rare-earth complexes. The electroneutral ligand exchange reactions of such complexes with stearic acid monolayer allowed to neutralise monolayer surface under rare-earth cations binding and to form condenced monolayer below the triple-point temperature. The compression of such monolayer to the state of minimal compressibility and subsequent monolayer deposition resulted in the formation of high ordered LB films with high content of adsorbed multivalent rare-earth cations arranged in two-dimensional monoatomic arrays.     

Micro- and nanopatterned copper structures using directed self-assembly on templates fabricated from phase-separated mixed Langmuir-Blodgett films

We report a versatile method to confine metal thin films in micro- and nanopatterns using directed self-assembly on the templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The pattern of the mixed LB films can be tuned by adjusting intermolecular interaction between the film-forming molecules in the LB films and by varying the fabrication conditions of the films such as the mixing ratio, subphase temperature, and surface pressure. We use the patterned LB films for templates to confine metal in patterned regions, taking advantage of the difference between the surface free energy of the patterned regions and that of the self-assembled monolayer of the silane coupling agent. Au nanoparticles are confined onto the patterned films as a catalyst for the succeeding Cu electroless deposition. The atomic force microscopic images, Auger electron spectra, and scanning Auger electron maps of a Cu-deposited film show that Cu is selectively deposited on the patterns of phase separation of the original mixed LB films.     

Correlation of Molecular Assembly and Interactions in Crystals and Langmuir–Blodgett Films of N‐(2,4‐dinitrophenyl)‐n‐octadecylamine

Correlation of molecular organization in crystals and in ultrathin films is of fundamental interest in the design of molecular materials based on thin films. We have chosen as a test case, N‐(2,4‐dinitrophenyl)‐n‐octadecylamine (DNPOA), a potential candidate for the fabrication of Langmuir–Blodgett (LB) films for quadratic nonlinear optical applications. Like several other 4‐nitroaniline derivatives, DNPOA does not form stable monolayers at the air–water interface. This has precluded investigations of their organization in LB films. We have stabilized composite Langmuir films of DNPOA with the phospholipid molecule DSPC and fabricated their LB films. Successful growth of single crystals of DNPOA allowed structure determination and detailed analysis of molecular associations in the solid state. Electronic absorption spectra of DNPOA in solution, in the solid state and in the LB film are investigated. Modeling of the various spectral signatures by semiempirical computations on molecular clusters extracted from the crystal lattice provides insight into the correlation between the molecular organization in crystals and in LB films.